smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-BETA5 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Constellation.2 (SATA)
Device Model:     MM1000GBKAL
Serial Number:    --
LU WWN Device Id: 5 000c50 ...
Firmware Version: HPGE
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database 7.3/5528
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Nov 24 21:41:32 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Disabled
DSN feature is:   Unavailable
ATA Security is:  Unavailable
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  634) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 206) minutes.
Conveyance self-test routine
recommended polling time: 	 (   3) minutes.
SCT capabilities: 	       (0x103d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   084   063   044    -    237961160
  3 Spin_Up_Time            PO----   094   094   070    -    0
  4 Start_Stop_Count        -O--CK   100   100   020    -    127
  5 Reallocated_Sector_Ct   PO--CK   073   073   036    -    1106
  7 Seek_Error_Rate         POSR--   075   060   030    -    34629268
  9 Power_On_Hours          -O--CK   049   049   000    -    45207
 10 Spin_Retry_Count        PO--C-   100   100   097    -    0
 12 Power_Cycle_Count       -O--CK   100   100   020    -    126
180 Unknown_HDD_Attribute   PO-RCK   100   100   030    -    1545705648
184 End-to-End_Error        -O--CK   100   100   003    -    0
187 Reported_Uncorrect      -O--CK   100   100   000    -    0
188 Command_Timeout         -O--CK   100   100   000    -    0
189 High_Fly_Writes         -O-RCK   100   100   000    -    0
190 Airflow_Temperature_Cel -O---K   076   047   045    -    24 (Min/Max 12/24)
191 G-Sense_Error_Rate      -O--CK   100   100   000    -    0
192 Power-Off_Retract_Count -O--CK   100   100   000    -    125
193 Load_Cycle_Count        -O--CK   100   100   000    -    1998
194 Temperature_Celsius     -O---K   024   053   000    -    24 (0 10 0 0 0)
195 Hardware_ECC_Recovered  -O-RC-   120   099   000    -    237961160
196 Reallocated_Event_Count PO--CK   073   073   036    -    1106
197 Current_Pending_Sector  -O--C-   100   100   000    -    0
198 Offline_Uncorrectable   ----C-   100   100   000    -    0
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x12       GPL,SL  R/O      1  SATA NCQ Non-Data log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1       GPL,SL  VS      20  Device vendor specific log
0xa2       GPL     VS    4496  Device vendor specific log
0xa8       GPL,SL  VS     129  Device vendor specific log
0xa9       GPL,SL  VS       1  Device vendor specific log
0xb0       GPL     VS    5176  Device vendor specific log
0xb6       GPL     VS    1918  Device vendor specific log
0xbd       GPL     VS     252  Device vendor specific log
0xbe-0xbf  GPL     VS   65535  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 149 (device log contains only the most recent 20 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 149 [8] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  10 -- 51 00 00 00 00 22 82 2f c0 00 00  Error: IDNF at LBA = 0x22822fc0 = 578957248

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 00 00 08 00 00 22 82 2f c0 40 00  3d+15:56:24.205  WRITE FPDMA QUEUED
  60 00 00 00 f0 00 00 23 21 3c c0 40 00  3d+15:56:24.204  READ FPDMA QUEUED
  60 00 00 02 00 00 00 23 21 3a c0 40 00  3d+15:56:24.195  READ FPDMA QUEUED
  61 00 00 00 08 00 00 22 82 30 20 40 00  3d+15:56:24.186  WRITE FPDMA QUEUED
  61 00 00 00 08 00 00 22 82 2f a8 40 00  3d+15:56:24.175  WRITE FPDMA QUEUED

Error 148 [7] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  10 -- 51 00 00 00 00 22 82 2a 38 00 00  Error: IDNF at LBA = 0x22822a38 = 578955832

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 00 00 08 00 00 22 82 2a 38 40 00  3d+15:56:23.232  WRITE FPDMA QUEUED
  60 00 00 00 20 00 00 23 21 92 40 40 00  3d+15:56:23.222  READ FPDMA QUEUED
  61 00 00 00 08 00 00 22 82 2f 10 40 00  3d+15:56:23.201  WRITE FPDMA QUEUED
  60 00 00 00 68 00 00 23 21 93 28 40 00  3d+15:56:23.201  READ FPDMA QUEUED
  60 00 00 00 20 00 00 23 21 93 50 40 00  3d+15:56:23.201  READ FPDMA QUEUED

Error 147 [6] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  10 -- 51 00 00 00 00 22 81 f3 80 00 00  Error: IDNF at LBA = 0x2281f380 = 578941824

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 00 00 08 00 00 22 81 f3 80 40 00  3d+15:56:12.772  WRITE FPDMA QUEUED
  60 00 00 00 28 00 00 23 1c d9 90 40 00  3d+15:56:12.745  READ FPDMA QUEUED
  60 00 00 00 b8 00 00 23 1c d8 60 40 00  3d+15:56:12.738  READ FPDMA QUEUED
  60 00 00 00 40 00 00 23 1c d4 00 40 00  3d+15:56:12.737  READ FPDMA QUEUED
  60 00 00 00 e0 00 00 23 1c d2 b8 40 00  3d+15:56:12.736  READ FPDMA QUEUED

Error 146 [5] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  10 -- 51 00 00 00 00 22 81 ef 08 00 00  Error: IDNF at LBA = 0x2281ef08 = 578940680

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 00 00 08 00 00 22 81 ef 08 40 00  3d+15:56:11.561  WRITE FPDMA QUEUED
  60 00 00 00 08 00 00 21 84 7d f0 40 00  3d+15:56:11.561  READ FPDMA QUEUED
  60 00 00 00 10 00 00 21 84 7d 80 40 00  3d+15:56:11.561  READ FPDMA QUEUED
  60 00 00 00 b8 00 00 21 84 7c c8 40 00  3d+15:56:11.560  READ FPDMA QUEUED
  60 00 00 00 08 00 00 23 1c 75 f0 40 00  3d+15:56:11.482  READ FPDMA QUEUED

Error 145 [4] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  10 -- 51 00 00 00 00 18 00 4c b0 00 00  Error: IDNF at LBA = 0x18004cb0 = 402672816

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 00 00 08 00 00 18 00 4c b0 40 00  3d+15:56:00.152  WRITE FPDMA QUEUED
  61 00 00 00 08 00 00 05 80 28 c0 40 00  3d+15:56:00.143  WRITE FPDMA QUEUED
  61 00 00 00 08 00 00 02 93 9f 78 40 00  3d+15:56:00.131  WRITE FPDMA QUEUED
  60 00 00 00 20 00 00 23 17 29 28 40 00  3d+15:56:00.113  READ FPDMA QUEUED
  60 00 00 00 20 00 00 23 17 29 00 40 00  3d+15:56:00.113  READ FPDMA QUEUED

Error 144 [3] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  10 -- 51 00 00 00 00 22 81 2d 08 00 00  Error: IDNF at LBA = 0x22812d08 = 578891016

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 00 00 08 00 00 22 81 2d 08 40 00  3d+15:55:38.383  WRITE FPDMA QUEUED
  60 00 00 02 00 00 00 23 0f fb 28 40 00  3d+15:55:38.353  READ FPDMA QUEUED
  60 00 00 02 00 00 00 23 0f f9 28 40 00  3d+15:55:38.346  READ FPDMA QUEUED
  60 00 00 02 00 00 00 23 0f f7 28 40 00  3d+15:55:38.345  READ FPDMA QUEUED
  60 00 00 01 c8 00 00 23 0f f4 f8 40 00  3d+15:55:38.344  READ FPDMA QUEUED

Error 143 [2] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  10 -- 51 00 00 00 00 18 00 2a e0 00 00  Error: IDNF at LBA = 0x18002ae0 = 402664160

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 00 00 08 00 00 18 00 2a e0 40 00  3d+15:54:08.975  WRITE FPDMA QUEUED
  61 00 00 00 08 00 00 21 00 2b 48 40 00  3d+15:54:08.933  WRITE FPDMA QUEUED
  60 00 00 00 08 00 00 21 86 d9 40 40 00  3d+15:54:08.884  READ FPDMA QUEUED
  60 00 00 00 08 00 00 21 86 d5 88 40 00  3d+15:54:08.817  READ FPDMA QUEUED
  61 00 00 00 08 00 00 05 80 28 00 40 00  3d+15:54:08.798  WRITE FPDMA QUEUED

Error 142 [1] occurred at disk power-on lifetime: 44764 hours (1865 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  10 -- 51 00 00 00 00 21 86 dd a0 00 00  Error: IDNF at LBA = 0x2186dda0 = 562486688

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 00 00 10 00 00 21 86 dd a0 40 00  3d+15:51:15.457  WRITE FPDMA QUEUED
  61 00 00 00 20 00 00 18 1e 64 98 40 00  3d+15:51:15.449  WRITE FPDMA QUEUED
  61 00 00 00 48 00 00 24 80 80 a0 40 00  3d+15:51:15.440  WRITE FPDMA QUEUED
  61 00 00 00 18 00 00 24 00 32 80 40 00  3d+15:51:15.431  WRITE FPDMA QUEUED
  61 00 00 00 18 00 00 23 80 67 d8 40 00  3d+15:51:15.422  WRITE FPDMA QUEUED

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     44779         -
# 2  Short offline       Completed without error       00%     44756         -
# 3  Short offline       Completed without error       00%     44732         -
# 4  Short offline       Completed without error       00%     44708         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       522 (0x020a)
Device State:                        Active (0)
Current Temperature:                    24 Celsius
Power Cycle Min/Max Temperature:     12/24 Celsius
Lifetime    Min/Max Temperature:     10/53 Celsius
Specified Max Operating Temperature:    60 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        10 minutes
Min/Max recommended Temperature:      5/60 Celsius
Min/Max Temperature Limit:           -40/70 Celsius
Temperature History Size (Index):    128 (14)

SCT Error Recovery Control:
           Read:    100 (10.0 seconds)
          Write:    100 (10.0 seconds)

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 2) ==
0x01  0x008  4             126  ---  Lifetime Power-On Resets
0x01  0x010  4           45207  ---  Power-on Hours
0x01  0x018  6     12523256080  ---  Logical Sectors Written
0x01  0x020  6        31039985  ---  Number of Write Commands
0x01  0x028  6     54225506715  ---  Logical Sectors Read
0x01  0x030  6       146907177  ---  Number of Read Commands
0x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
0x03  0x008  4           45210  ---  Spindle Motor Power-on Hours
0x03  0x010  4           45210  ---  Head Flying Hours
0x03  0x018  4            1998  ---  Head Load Events
0x03  0x020  4            1106  ---  Number of Reallocated Logical Sectors
0x03  0x028  4               0  ---  Read Recovery Attempts
0x03  0x030  4               0  ---  Number of Mechanical Start Failures
0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
0x04  0x008  4               0  ---  Number of Reported Uncorrectable Errors
0x04  0x010  4               0  ---  Resets Between Cmd Acceptance and Completion
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2           18  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS



