smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint S250
Device Model:     SAMSUNG HD250HJ
Serial Number:    --
LU WWN Device Id: 5 0000f0 ...
Firmware Version: FH100-05
User Capacity:    250,059,350,016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is:    Mon Mar 21 07:05:16 2022 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Disabled
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 3697) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  62) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   253   085   051    -    1
  3 Spin_Up_Time            POS---   253   253   025    -    4480
  4 Start_Stop_Count        -O--CK   081   081   000    -    20028
  5 Reallocated_Sector_Ct   PO--CK   031   031   010    -    651
  7 Seek_Error_Rate         POSR--   253   253   051    -    0
  8 Seek_Time_Performance   P-S--K   253   253   015    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    23353
 10 Spin_Retry_Count        PO--CK   253   253   051    -    0
 11 Calibration_Retry_Count -O--C-   253   253   000    -    0
 12 Power_Cycle_Count       -O--CK   090   090   000    -    10230
 13 Read_Soft_Error_Rate    -OSR--   100   100   000    -    86842
184 End-to-End_Error        PO--CK   253   253   099    -    0
187 Reported_Uncorrect      -O--CK   001   001   000    -    12662345
188 Command_Timeout         -O--CK   253   253   000    -    0
190 Airflow_Temperature_Cel -O---K   157   001   000    -    27 (Min/Max 0/42)
194 Temperature_Celsius     -O---K   154   001   000    -    28 (Min/Max 0/42)
195 Hardware_ECC_Recovered  -O-RC-   100   100   000    -    86842
196 Reallocated_Event_Count -O--CK   031   031   000    -    651
197 Current_Pending_Sector  -O--C-   090   089   000    -    102
198 Offline_Uncorrectable   ----CK   253   100   000    -    0
199 UDMA_CRC_Error_Count    -OSRCK   200   187   000    -    1
200 Multi_Zone_Error_Rate   -O-R--   253   100   000    -    0
201 Soft_Read_Error_Rate    -O-R--   253   080   000    -    0
202 Data_Address_Mark_Errs  -O--CK   253   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      2  Comprehensive SMART error log
0x03       GPL     R/O      2  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 65535 (device log contains only the most recent 8 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 65535 [2] occurred at disk power-on lifetime: 11462 hours (477 days + 14 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  00 -- 38 ec a0 00 00 c1 00 42 d8 08 00  Device Fault at LBA = 0xc90042d8 = 3372237528

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  42 00 00 46 03 d8 a0 00 ef 00 00 c1 42     00:00:00.000  READ VERIFY SECTOR(S) EXT
  00 00 00 00 00 00 00 00 00 00 00 00 00 37d+15:23:39.040  NOP [Abort queued commands]
  e2 00 80 00 66 00 00 04 00 61 01 03 00     00:00:00.000  STANDBY
  94 00 00 08 40 00 e1 01 51 8c 30 11 42  4d+04:48:04.296  STANDBY IMMEDIATE [RET-4]
  01 a0 00 fa ec 08 00 42 00 00 b1 30 00 37d+10:50:25.889  [RESERVED]

Error 65534 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  00 -- 00 00 00 00 00 00 00 00 00 00 00

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  00 00 66 04 01 e2 00 00 03 00 61 41 00     00:00:00.000  NOP [Reserved subcommand] [OBS-ACS-2]
  c5 08 40 01 30 94 00 e1 11 51 8c 80 00 24d+20:31:29.185  WRITE MULTIPLE
  e1 b0 ec 42 9e 01 08 00 30 00 00 8c a0     01:12:50.813  IDLE IMMEDIATE
  00 46 03 00 00 42 b0 a0 9e ef 00 00 00     00:00:00.000  NOP [Reserved subcommand] [OBS-ACS-2]
  a0 00 00 00 00 00 00 00 00 00 00 00 00     01:12:45.938  PACKET

Error 65533 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  30 -- 2c 8c 01 80 11 51 94 00 e1 c7 08  Device Fault at LBA = 0x8011579400e1 = 140811972116705

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  33 42 8d 00 00 e1 01 08 8c 30 00 c8 d8 12d+10:15:41.890  WRITE LONG (w/o retry) [OBS-4]
  00 00 00 a0 00 00 42 d8 00 8d ef 00 46 45d+22:45:08.736  NOP [Abort queued commands]
  5e 00 00 00 00 a0 00 00 00 00 00 ec 00     13:58:51.714  TRUSTED SEND
  00 04 01 00 61 00 e2 00 41 03 00 00 00     00:00:00.000  NOP [Don't abort queued commands] [OBS-ACS-2]
  a1 01 30 e1 8c c8 94 00 80 11 51 2c 08 19d+19:21:48.800  IDENTIFY PACKET DEVICE

Error 65532 [7] occurred at disk power-on lifetime: 5555 hours (231 days + 11 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  08 -- 00 d0 00 e0 b6 a7 00 00 0a 25 00

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  00 00 12 ab 80 00 00 00 0c 01 2e 00 a1     00:00:23.353  NOP [Reserved subcommand] [OBS-ACS-2]

Error 65531 [6] occurred at disk power-on lifetime: 7352 hours (306 days + 8 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  08 -- 00 80 00 e0 b6 a2 00 00 0a 25 00

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  f7 00 08 0a 70 25 00 00 e0 b6 a2 00 00     00:00:00.000  [VENDOR SPECIFIC]
  b8 00 08 0a 68 25 00 00 e0 b6 a2 00 00     00:00:00.000  [RESERVED FOR COMPACTFLASH ASSOCIATION]
  7a 00 08 0a 10 25 00 00 e0 5a c8 00 00     00:00:00.000  SEEK [RET-4]
  7a 00 08 0a 00 25 00 00 e0 ba c8 00 00     00:00:00.000  SEEK [RET-4]
  00 00 12 ab 80 00 00 00 0c 01 2e 00 a1     00:00:23.353  NOP [Reserved subcommand] [OBS-ACS-2]

Error 65530 [5] occurred at disk power-on lifetime: 6846 hours (285 days + 6 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  08 -- 00 80 00 e0 b6 a2 00 00 0a 25 00

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  0b 00 08 0a 70 25 00 00 e0 b6 a2 00 00     00:00:00.000  REQUEST SENSE DATA EXT
  4f 00 08 0a 68 25 00 00 e0 b6 a2 00 00     00:00:00.000  [RESERVED]
  11 00 08 0a 10 25 00 00 e0 5a c8 00 00     00:00:00.000  RECALIBRATE [RET-4]
  11 00 08 0a 00 25 00 00 e0 ba c8 00 00     00:00:00.000  RECALIBRATE [RET-4]
  00 00 13 ab 80 00 00 00 0c 01 2e 00 a1     00:00:23.353  NOP [Reserved subcommand] [OBS-ACS-2]

Error 65529 [4] occurred at disk power-on lifetime: 6326 hours (263 days + 14 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  08 -- 00 80 00 e0 b6 a2 00 00 0a 25 00

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  f0 00 08 0a 70 25 00 00 e0 b6 a2 00 00     00:00:00.000  [VENDOR SPECIFIC]
  b1 00 08 0a 68 25 00 00 e0 b6 a2 00 00     00:00:00.000  DEVICE CONFIGURATION [Reserved subcommand] [OBS-ACS-3]
  34 00 08 0a 10 25 00 00 e0 5a c8 00 00     00:00:00.000  WRITE SECTORS(S) EXT
  34 00 08 0a 00 25 00 00 e0 ba c8 00 00     00:00:00.000  WRITE SECTORS(S) EXT
  ff 11 89 11 91 00 00 11 03 c9 b1 04 11     00:00:00.000  [VENDOR SPECIFIC]

Error 65528 [3] occurred at disk power-on lifetime: 25408 hours (1058 days + 16 hours)
  When the command that caused the error occurred, the device was in a reserved state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  00 -- 00 00 00 00 00 00 00 00 00 00 00

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  00 00 15 00 80 00 04 00 68 01 66 00 a1     00:00:16.866  NOP [Reserved subcommand] [OBS-ACS-2]

SMART Extended Self-test Log (GP Log 0x07) not supported

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  2
SCT Version (vendor specific):       256 (0x0100)
Device State:                        Active (0)
Current Temperature:                    28 Celsius
Power Cycle Min/Max Temperature:     26/28 Celsius
Lifetime    Min/Max Temperature:      0/44 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:     -4/72 Celsius
Min/Max Temperature Limit:           -9/77 Celsius
Temperature History Size (Index):    128 (56)

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            0  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            1  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0010  2            0  R_ERR response for host-to-device data FIS, non-CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x0013  2            0  R_ERR response for host-to-device non-data FIS, non-CRC
0x8001  2            0  Vendor specific

