smartctl 7.2 2021-09-14 r5236 [FreeBSD 14.0-CURRENT amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG HM251JX
Serial Number:    --
LU WWN Device Id: 5 0f0000 ...
Firmware Version: 2AF00_01
User Capacity:    250,059,350,016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0
SATA Version is:  SATA 2.5, 1.5 Gb/s
Local Time is:    Wed Nov 17 00:50:41 2021 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Disabled
APM level is:     254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Write SCT (Get) Feature Control Command failed: Read of ATA output registers not implemented [JMicron]
Wt Cache Reorder: Unknown (SCT Feature Control command failed)

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  102) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 102) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   100   100   051    -    0
  3 Spin_Up_Time            POS---   252   252   025    -    2687
  4 Start_Stop_Count        -O--CK   099   099   000    -    1128
  5 Reallocated_Sector_Ct   PO--CK   091   091   010    -    92
  7 Seek_Error_Rate         -OSR--   252   252   051    -    0
  8 Seek_Time_Performance   --S--K   252   252   015    -    0
  9 Power_On_Hours          -O--CK   252   252   000    -    134
 10 Spin_Retry_Count        -O--CK   252   252   051    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    442
191 G-Sense_Error_Rate      -O--CK   100   100   000    -    6
192 Power-Off_Retract_Count -O--CK   100   100   000    -    353
194 Temperature_Celsius     -O---K   160   094   000    -    26 (Min/Max 13/50)
195 Hardware_ECC_Recovered  -O-RC-   100   100   000    -    1
196 Reallocated_Event_Count -O--CK   252   252   000    -    0
197 Current_Pending_Sector  -O--C-   252   252   000    -    0
198 Offline_Uncorrectable   ----CK   252   252   000    -    0
199 UDMA_CRC_Error_Count    -OS-CK   200   200   000    -    11
200 Multi_Zone_Error_Rate   -O-R--   100   100   000    -    95
201 Soft_Read_Error_Rate    -O--CK   252   252   000    -    0
223 Load_Retry_Count        -O--CK   100   100   000    -    16
225 Load_Cycle_Count        -O--CK   100   100   000    -    3038
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      2  Comprehensive SMART error log
0x03       GPL     R/O      2  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x08           SL  R/O      1  Power Conditions log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x80       GPL,SL  R/W     16  Host vendor specific log
0x81-0x9f      SL  R/W     16  Host vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 11 (device log contains only the most recent 8 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 11 [2] occurred at disk power-on lifetime: 65 hours (2 days + 17 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  84 -- 51 00 08 00 00 03 cb fe c8 e0 00  Error: ICRC, ABRT 8 sectors at LBA = 0x03cbfec8 = 63700680

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 08 00 00 03 cb fe c8 e0 00     00:21:47.062  READ DMA EXT
  25 00 00 00 10 00 00 03 cb fe b8 e0 00     00:21:46.062  READ DMA EXT
  25 00 00 00 10 00 00 03 cb fe a8 e0 00     00:21:46.062  READ DMA EXT
  25 00 00 00 10 00 00 03 cb fe 98 e0 00     00:21:46.000  READ DMA EXT
  25 00 00 00 10 00 00 03 cb fe 88 e0 00     00:21:46.000  READ DMA EXT

Error 10 [1] occurred at disk power-on lifetime: 63 hours (2 days + 15 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  84 -- 51 00 08 00 00 00 08 21 40 e0 00  Error: ICRC, ABRT 8 sectors at LBA = 0x00082140 = 532800

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 08 00 00 00 08 21 40 e0 00     00:31:02.000  READ DMA EXT
  25 00 00 00 10 00 00 00 08 21 30 e0 00     00:31:01.000  READ DMA EXT
  25 00 00 00 10 00 00 00 08 21 20 e0 00     00:31:01.000  READ DMA EXT
  25 00 00 00 10 00 00 00 08 21 10 e0 00     00:31:01.000  READ DMA EXT
  25 00 00 00 10 00 00 00 08 21 00 e0 00     00:31:01.000  READ DMA EXT

Error 9 [0] occurred at disk power-on lifetime: 15 hours (0 days + 15 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  84 -- 51 00 80 00 00 06 0e 94 b8 e0 00  Error: ICRC, ABRT 128 sectors at LBA = 0x060e94b8 = 101618872

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 80 00 00 06 0e 94 b8 e0 00     00:15:05.812  READ DMA EXT
  25 00 00 00 80 00 00 06 0e 94 38 e0 00     00:15:04.750  READ DMA EXT
  25 00 00 00 80 00 00 06 0e 93 b8 e0 00     00:15:04.750  READ DMA EXT
  25 00 00 00 80 00 00 06 0e 93 38 e0 00     00:15:04.750  READ DMA EXT
  25 00 00 00 80 00 00 06 0e 92 b8 e0 00     00:15:04.750  READ DMA EXT

Error 8 [7] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  84 -- 51 00 80 00 00 00 5e 2f 6a e0 00  Error: ICRC, ABRT 128 sectors at LBA = 0x005e2f6a = 6172522

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 80 00 00 00 5e 2f 6a e0 00     00:00:24.125  READ DMA EXT
  25 00 00 00 80 00 00 00 5e 2e ea e0 00     00:00:24.000  READ DMA EXT
  25 00 00 00 80 00 00 00 5e 2e 6a e0 00     00:00:23.937  READ DMA EXT
  25 00 00 00 08 00 00 00 60 00 47 e0 00     00:00:23.375  READ DMA EXT
  25 00 00 00 80 00 00 00 00 00 d7 e0 00     00:00:23.375  READ DMA EXT

Error 7 [6] occurred at disk power-on lifetime: 65 hours (2 days + 17 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  84 -- 51 00 08 00 00 03 cb fe c8 e0 00  Error: ICRC, ABRT 8 sectors at LBA = 0x03cbfec8 = 63700680

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 08 00 00 03 cb fe c8 e0 00     00:21:47.062  READ DMA EXT
  25 00 00 00 10 00 00 03 cb fe b8 e0 00     00:21:46.062  READ DMA EXT
  25 00 00 00 10 00 00 03 cb fe a8 e0 00     00:21:46.062  READ DMA EXT
  25 00 00 00 10 00 00 03 cb fe 98 e0 00     00:21:46.000  READ DMA EXT
  25 00 00 00 10 00 00 03 cb fe 88 e0 00     00:21:46.000  READ DMA EXT

Error 6 [5] occurred at disk power-on lifetime: 63 hours (2 days + 15 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  84 -- 51 00 08 00 00 00 08 21 40 e0 00  Error: ICRC, ABRT 8 sectors at LBA = 0x00082140 = 532800

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 08 00 00 00 08 21 40 e0 00     00:31:02.000  READ DMA EXT
  25 00 00 00 10 00 00 00 08 21 30 e0 00     00:31:01.000  READ DMA EXT
  25 00 00 00 10 00 00 00 08 21 20 e0 00     00:31:01.000  READ DMA EXT
  25 00 00 00 10 00 00 00 08 21 10 e0 00     00:31:01.000  READ DMA EXT
  25 00 00 00 10 00 00 00 08 21 00 e0 00     00:31:01.000  READ DMA EXT

Error 5 [4] occurred at disk power-on lifetime: 15 hours (0 days + 15 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  84 -- 51 00 80 00 00 06 0e 94 b8 e0 00  Error: ICRC, ABRT 128 sectors at LBA = 0x060e94b8 = 101618872

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 80 00 00 06 0e 94 b8 e0 00     00:15:05.812  READ DMA EXT
  25 00 00 00 80 00 00 06 0e 94 38 e0 00     00:15:04.750  READ DMA EXT
  25 00 00 00 80 00 00 06 0e 93 b8 e0 00     00:15:04.750  READ DMA EXT
  25 00 00 00 80 00 00 06 0e 93 38 e0 00     00:15:04.750  READ DMA EXT
  25 00 00 00 80 00 00 06 0e 92 b8 e0 00     00:15:04.750  READ DMA EXT

Error 4 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  84 -- 51 00 80 00 00 00 5e 2f 6a e0 00  Error: ICRC, ABRT 128 sectors at LBA = 0x005e2f6a = 6172522

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 80 00 00 00 5e 2f 6a e0 00     00:00:24.125  READ DMA EXT
  25 00 00 00 80 00 00 00 5e 2e ea e0 00     00:00:24.000  READ DMA EXT
  25 00 00 00 80 00 00 00 5e 2e 6a e0 00     00:00:23.937  READ DMA EXT
  25 00 00 00 08 00 00 00 60 00 47 e0 00     00:00:23.375  READ DMA EXT
  25 00 00 00 80 00 00 00 00 00 d7 e0 00     00:00:23.375  READ DMA EXT

SMART Extended Self-test Log (GP Log 0x07) not supported

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%         8         -
# 2  Short offline       Completed without error       00%         6         -
# 3  Extended offline    Aborted by host               90%         1         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  2
SCT Version (vendor specific):       256 (0x0100)
Device State:                        Active (0)
Current Temperature:                    26 Celsius
Power Cycle Min/Max Temperature:     26/26 Celsius
Lifetime    Min/Max Temperature:     19/64 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:     15/55 Celsius
Min/Max Temperature Limit:           10/60 Celsius
Temperature History Size (Index):    128 (47)

Write SCT (Get) Error Recovery Control Command failed: Read of ATA output registers not implemented [JMicron]
SCT (Get) Error Recovery Control command failed

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x000a  2            0  Device-to-host register FISes sent due to a COMRESET
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            0  Transition from drive PhyRdy to drive PhyNRdy
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS
0x8001  2            0  Vendor specific

