smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint P80
Device Model:     SAMSUNG SP0812C
Serial Number:    --
Firmware Version: SU100-30
User Capacity:    80,060,424,192 bytes [80.0 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database 7.3/5528
ATA Version is:   ATA/ATAPI-7 T13/1532D revision 0
Local Time is:    Sun Sep 15 10:14:09 2024 ACST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is:     254 (maximum performance), recommended: 254
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 3000) seconds.
Offline data collection
capabilities: 			 (0x1b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  50) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   100   100   051    -    0
  3 Spin_Up_Time            POS---   100   100   025    -    4160
  4 Start_Stop_Count        -O--CK   080   080   000    -    21124
  5 Reallocated_Sector_Ct   PO--CK   100   100   011    -    0
  7 Seek_Error_Rate         POSR--   100   100   051    -    0
  8 Seek_Time_Performance   P-S--K   100   100   015    -    0
  9 Power_On_Half_Minutes   -O--CK   097   097   000    -    18534h+36m
 10 Spin_Retry_Count        PO--CK   100   100   051    -    2
 11 Calibration_Retry_Count -O--C-   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   090   090   000    -    10632
194 Temperature_Celsius     -O---K   193   079   000    -    15
195 Hardware_ECC_Recovered  -O-RC-   100   100   000    -    207857
196 Reallocated_Event_Count -O--CK   098   098   000    -    6
197 Current_Pending_Sector  -O--C-   100   100   000    -    0
198 Total_Offl_Uncorrectabl ----CK   098   098   000    -    6
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    1
200 Multi_Zone_Error_Rate   -O-R--   100   100   051    -    0
201 Soft_Read_Error_Rate    -O-R--   100   100   051    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory not supported

SMART Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00           SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      2  Comprehensive SMART error log
0x06           SL  R/O      2  SMART self-test log
0x80-0x9f      SL  R/W     16  Host vendor specific log

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

SMART Error Log Version: 1
ATA Error Count: 87 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 87 occurred at disk power-on lifetime: 18482 hours (770 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 08 4c c4 e5  Error: ICRC, ABRT at LBA = 0x05c44c08 = 96750600

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 08 4c c4 e5 00      00:00:43.938  READ DMA
  c8 00 20 20 a9 a3 e7 00      00:00:43.938  READ DMA
  c8 00 30 e0 c8 0c e8 00      00:00:43.938  READ DMA
  c8 00 08 78 1f 91 e5 00      00:00:43.938  READ DMA
  c8 00 c0 20 c8 0c e8 00      00:00:43.938  READ DMA

Error 86 occurred at disk power-on lifetime: 18478 hours (769 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 c0 00 1d 80 e3  Error: ICRC, ABRT 192 sectors at LBA = 0x03801d00 = 58727680

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 c0 00 1d 80 e3 00      00:10:23.313  READ DMA
  c8 00 08 20 16 04 e9 00      00:10:23.313  READ DMA
  c8 00 e8 18 13 80 e3 00      00:10:23.313  READ DMA
  c8 00 10 08 13 80 e3 00      00:10:23.313  READ DMA
  c8 00 08 f8 15 04 e9 00      00:10:23.313  READ DMA

Error 85 occurred at disk power-on lifetime: 18462 hours (769 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 fe 00 00 00 40  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 05 fe 00 00 00 40 00      00:00:53.000  SET FEATURES [Enable APM]
  c8 00 90 a8 c1 4d e2 00      00:00:53.000  READ DMA
  c8 00 08 18 3e 04 e1 00      00:00:53.000  READ DMA
  c8 00 f8 d0 1f 4e e2 00      00:00:53.000  READ DMA
  c8 00 d8 50 96 4d e2 00      00:00:52.938  READ DMA

Error 84 occurred at disk power-on lifetime: 18462 hours (769 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 fe 00 00 00 40  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 05 fe 00 00 00 40 00      00:08:43.188  SET FEATURES [Enable APM]
  c8 00 88 d0 bb 4d e2 00      00:08:43.188  READ DMA
  c8 00 10 50 63 04 e8 00      00:08:43.125  READ DMA
  c8 00 00 48 b3 57 e6 00      00:08:43.125  READ DMA
  c8 00 08 18 3e 04 e1 00      00:08:43.125  READ DMA

Error 83 occurred at disk power-on lifetime: 18462 hours (769 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 fe 00 00 00 40  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 05 fe 00 00 00 40 00      00:04:15.375  SET FEATURES [Enable APM]
  c8 00 00 e0 b9 4d e2 00      00:04:15.375  READ DMA
  c8 00 08 18 3e 04 e1 00      00:04:15.313  READ DMA
  c8 00 10 50 63 04 e8 00      00:04:15.313  READ DMA
  c8 00 00 30 47 5b e6 00      00:04:15.313  READ DMA

SMART Extended Self-test Log (GP Log 0x07) not supported

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     18534         -
# 2  Extended offline    Completed: read failure       00%     18333         18664237

Selective Self-tests/Logging not supported

SCT Commands not supported

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11) not supported

