smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.4-RELEASE-p1 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST2000DM001-1ER164
Serial Number:    --
LU WWN Device Id: 5 000c50 ...
Firmware Version: CC43
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database 7.3/5528
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Feb 16 01:29:15 2025 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   89) seconds.
Offline data collection
capabilities: 			 (0x73) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 223) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x1085)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   117   098   006    -    139232368
  3 Spin_Up_Time            PO----   095   094   000    -    0
  4 Start_Stop_Count        -O--CK   100   100   020    -    569
  5 Reallocated_Sector_Ct   PO--CK   100   100   010    -    8
  7 Seek_Error_Rate         POSR--   063   060   030    -    270729812209
  9 Power_On_Hours          -O--CK   022   022   000    -    68851
 10 Spin_Retry_Count        PO--C-   100   100   097    -    0
 12 Power_Cycle_Count       -O--CK   100   100   020    -    568
183 Runtime_Bad_Block       -O--CK   100   100   000    -    0
184 End-to-End_Error        -O--CK   100   100   099    -    0
187 Reported_Uncorrect      -O--CK   001   001   000    -    155
188 Command_Timeout         -O--CK   100   098   000    -    12 12 16
189 High_Fly_Writes         -O-RCK   099   099   000    -    1
190 Airflow_Temperature_Cel -O---K   063   050   045    -    37 (Min/Max 32/37)
191 G-Sense_Error_Rate      -O--CK   100   100   000    -    0
192 Power-Off_Retract_Count -O--CK   100   100   000    -    0
193 Load_Cycle_Count        -O--CK   001   001   000    -    250280
194 Temperature_Celsius     -O---K   037   050   000    -    37 (0 15 0 0 0)
197 Current_Pending_Sector  -O--C-   098   061   000    -    328
198 Offline_Uncorrectable   ----C-   098   061   000    -    328
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    2
240 Head_Flying_Hours       ------   100   253   000    -    56753h+21m+00.815s
241 Total_LBAs_Written      ------   100   253   000    -    35162438972
242 Total_LBAs_Read         ------   100   253   000    -    26127993095996
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1       GPL,SL  VS      20  Device vendor specific log
0xa2       GPL     VS    4496  Device vendor specific log
0xa8       GPL,SL  VS     129  Device vendor specific log
0xa9       GPL,SL  VS       1  Device vendor specific log
0xab       GPL     VS       1  Device vendor specific log
0xb0       GPL     VS    5176  Device vendor specific log
0xbe-0xbf  GPL     VS   65535  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL,SL  VS      10  Device vendor specific log
0xc3       GPL,SL  VS       8  Device vendor specific log
0xc4       GPL,SL  VS       5  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 155 (device log contains only the most recent 20 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 155 [14] occurred at disk power-on lifetime: 2274 hours (94 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 ad 09 49 e8 00 00  Error: UNC at LBA = 0xad0949e8 = 2903067112

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 18 00 00 ad 09 49 e8 40 00  4d+19:11:54.818  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 00  4d+19:11:54.790  READ LOG EXT
  60 00 00 00 18 00 00 ad 09 49 e8 40 00  4d+19:11:51.205  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 00  4d+19:11:51.131  READ LOG EXT
  60 00 00 00 18 00 00 ad 09 49 e8 40 00  4d+19:11:46.566  READ FPDMA QUEUED

Error 154 [13] occurred at disk power-on lifetime: 2274 hours (94 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 ad 09 49 e8 00 00  Error: UNC at LBA = 0xad0949e8 = 2903067112

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 18 00 00 ad 09 49 e8 40 00  4d+19:11:51.205  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 00  4d+19:11:51.131  READ LOG EXT
  60 00 00 00 18 00 00 ad 09 49 e8 40 00  4d+19:11:46.566  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 00  4d+19:11:46.529  READ LOG EXT
  60 00 00 00 18 00 00 ad 09 49 e8 40 00  4d+19:11:41.915  READ FPDMA QUEUED

Error 153 [12] occurred at disk power-on lifetime: 2274 hours (94 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 ad 09 49 e8 00 00  Error: UNC at LBA = 0xad0949e8 = 2903067112

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 18 00 00 ad 09 49 e8 40 00  4d+19:11:46.566  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 00  4d+19:11:46.529  READ LOG EXT
  60 00 00 00 18 00 00 ad 09 49 e8 40 00  4d+19:11:41.915  READ FPDMA QUEUED
  ef 00 02 00 00 00 00 00 00 00 00 40 00  4d+19:11:41.915  SET FEATURES [Enable write cache]
  ef 00 aa 00 00 00 00 00 00 00 00 40 00  4d+19:11:41.915  SET FEATURES [Enable read look-ahead]

Error 152 [11] occurred at disk power-on lifetime: 2274 hours (94 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 ad 09 49 e8 00 00  Error: UNC at LBA = 0xad0949e8 = 2903067112

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 18 00 00 ad 09 49 e8 40 00  4d+19:11:41.915  READ FPDMA QUEUED
  ef 00 02 00 00 00 00 00 00 00 00 40 00  4d+19:11:41.915  SET FEATURES [Enable write cache]
  ef 00 aa 00 00 00 00 00 00 00 00 40 00  4d+19:11:41.915  SET FEATURES [Enable read look-ahead]
  c6 00 00 00 10 00 00 00 00 00 00 40 00  4d+19:11:41.914  SET MULTIPLE MODE
  ef 00 10 00 02 00 00 00 00 00 00 40 00  4d+19:11:41.914  SET FEATURES [Enable SATA feature]

Error 151 [10] occurred at disk power-on lifetime: 2274 hours (94 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 ad 09 49 e8 00 00  Error: UNC at LBA = 0xad0949e8 = 2903067112

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 18 00 00 ad 09 49 e8 40 00  4d+19:11:35.097  READ FPDMA QUEUED
  61 00 00 00 08 00 00 76 1f 4d 90 40 00  4d+19:11:35.096  WRITE FPDMA QUEUED
  61 00 00 00 08 00 00 b6 03 12 d8 40 00  4d+19:11:35.096  WRITE FPDMA QUEUED
  61 00 00 00 08 00 00 b5 84 20 b0 40 00  4d+19:11:35.096  WRITE FPDMA QUEUED
  61 00 00 00 18 00 00 b5 10 e6 c0 40 00  4d+19:11:35.096  WRITE FPDMA QUEUED

Error 150 [9] occurred at disk power-on lifetime: 2273 hours (94 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 ad 09 49 d8 00 00  Error: UNC at LBA = 0xad0949d8 = 2903067096

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 50 00 00 d5 83 ab 38 40 00  4d+17:44:01.426  READ FPDMA QUEUED
  60 00 00 00 50 00 00 d5 83 ab 98 40 00  4d+17:44:01.425  READ FPDMA QUEUED
  60 00 00 00 08 00 00 ad 09 49 d8 40 00  4d+17:44:01.425  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 00  4d+17:44:01.380  READ LOG EXT
  60 00 00 00 50 00 00 d5 83 ab 38 40 00  4d+17:43:57.821  READ FPDMA QUEUED

Error 149 [8] occurred at disk power-on lifetime: 2273 hours (94 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 ad 09 49 d8 00 00  Error: UNC at LBA = 0xad0949d8 = 2903067096

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 50 00 00 d5 83 ab 38 40 00  4d+17:43:57.821  READ FPDMA QUEUED
  60 00 00 00 50 00 00 d5 83 ab 98 40 00  4d+17:43:57.821  READ FPDMA QUEUED
  60 00 00 00 08 00 00 ad 09 49 d8 40 00  4d+17:43:57.820  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 00  4d+17:43:57.780  READ LOG EXT
  60 00 00 00 50 00 00 d5 83 ab 38 40 00  4d+17:43:57.161  READ FPDMA QUEUED

Error 148 [7] occurred at disk power-on lifetime: 2273 hours (94 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 ad 09 49 d8 00 00  Error: UNC at LBA = 0xad0949d8 = 2903067096

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 50 00 00 d5 83 ab 38 40 00  4d+17:43:57.161  READ FPDMA QUEUED
  60 00 00 00 50 00 00 d5 83 ab 98 40 00  4d+17:43:57.161  READ FPDMA QUEUED
  60 00 00 00 08 00 00 ad 09 49 d8 40 00  4d+17:43:54.215  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 00  4d+17:43:54.187  READ LOG EXT
  60 00 00 00 08 00 00 ad 09 49 d8 40 00  4d+17:43:50.627  READ FPDMA QUEUED

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       522 (0x020a)
Device State:                        Active (0)
Current Temperature:                    37 Celsius
Power Cycle Min/Max Temperature:     31/37 Celsius
Lifetime    Min/Max Temperature:     15/50 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Data Table command not supported

SCT Error Recovery Control command not supported

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2            6  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS



