smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SanDisk based SSDs
Device Model:     SanDisk SD7SB3Q128G1001
Serial Number:    --
LU WWN Device Id: 5 001b44 ...
Firmware Version: X2160001
User Capacity:    128,035,676,160 bytes [128 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available, deterministic, zeroed
Device is:        In smartctl database 7.3/5319
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Oct 21 21:30:37 2022 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x11) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  10) minutes.

SMART Attributes Data Structure revision number: 4
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  5 Reallocated_Sector_Ct   -O--CK   100   100   ---    -    100
  9 Power_On_Hours          -O--CK   253   100   ---    -    17676
 12 Power_Cycle_Count       -O--CK   100   100   ---    -    1139
166 Unknown_Attribute       -O--CK   100   100   ---    -    1
167 Unknown_Attribute       -O--CK   100   100   ---    -    44
168 Unknown_Attribute       -O--CK   100   100   ---    -    454
169 Unknown_Attribute       -O--CK   100   100   ---    -    434
170 Unknown_Attribute       -O--CK   100   100   ---    -    7
171 Program_Fail_Count      -O--CK   100   100   ---    -    6
172 Erase_Fail_Count        -O--CK   100   100   ---    -    0
173 Avg_Write/Erase_Count   -O--CK   100   100   ---    -    325
174 Unexpect_Power_Loss_Ct  -O--CK   100   100   ---    -    71
178 Used_Rsvd_Blk_Cnt_Chip  -O--CK   100   100   ---    -    3
180 Unused_Rsvd_Blk_Cnt_Tot -O--CK   100   100   ---    -    6738
184 End-to-End_Error        -O--CK   100   100   ---    -    0
187 Reported_Uncorrect      -O--CK   100   100   ---    -    2551
188 Command_Timeout         -O--CK   100   100   ---    -    19
194 Temperature_Celsius     -O---K   069   058   ---    -    31 (Min/Max 10/58)
199 UDMA_CRC_Error_Count    -O--CK   100   100   ---    -    0
212 SATA_PHY_Error          -O--CK   100   100   ---    -    0
230 Perc_Write/Erase_Count  -O--CK   100   100   ---    -    2643
232 Perc_Avail_Resrvd_Space PO--CK   100   100   004    -    99
233 Media_Wearout_Indicator -O--CK   100   100   ---    -    42194
241 Total_LBAs_Written      ----CK   253   253   ---    -    25173
242 Total_LBAs_Read         ----CK   253   253   ---    -    15930
244 Thermal_Throttle        -O--CK   000   100   ---    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      2  Comprehensive SMART error log
0x03       GPL     R/O      1  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xde       GPL     VS       8  Device vendor specific log
0xdf       GPL     VS       1  Device vendor specific log

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 449 (device log contains only the most recent 4 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 449 [0] occurred at disk power-on lifetime: 17386 hours (724 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  51 -- 40 00 01 00 00 00 00 00 10 28 00

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  2f 00 00 00 01 00 00 00 00 00 10 28 00     00:00:00.000  READ LOG EXT
  60 00 08 00 08 00 00 02 6f 1b a0 40 00     00:00:00.000  READ FPDMA QUEUED
  60 00 20 00 00 00 00 07 97 2a a0 40 00     00:00:00.000  READ FPDMA QUEUED
  61 00 08 00 00 00 00 07 97 2a 50 40 00     00:00:00.000  WRITE FPDMA QUEUED
  61 00 08 00 00 00 00 07 a1 09 e0 40 00     00:00:00.000  WRITE FPDMA QUEUED

Error 448 [3] occurred at disk power-on lifetime: 17377 hours (724 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  51 -- 40 00 08 00 00 07 5a 70 b8 40 00   at LBA = 0x075a70b8 = 123367608

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 08 00 08 00 00 07 5a 70 b8 40 00     00:00:00.000  WRITE FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 28 00     00:00:00.000  READ LOG EXT
  61 00 08 00 00 00 00 00 63 d1 28 40 00     00:00:00.000  WRITE FPDMA QUEUED
  61 00 08 00 00 00 00 00 63 ce c0 40 00     00:00:00.000  WRITE FPDMA QUEUED
  61 00 08 00 00 00 00 00 63 ce 60 40 00     00:00:00.000  WRITE FPDMA QUEUED

Error 447 [2] occurred at disk power-on lifetime: 17365 hours (723 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  51 -- 40 00 08 00 00 00 5f eb 78 40 00   at LBA = 0x005feb78 = 6286200

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 10 00 08 00 00 00 5f eb 78 40 00     00:00:00.000  WRITE FPDMA QUEUED
  61 00 18 00 08 00 00 00 5f eb 30 40 00     00:00:00.000  WRITE FPDMA QUEUED
  61 00 18 00 08 00 00 00 5f eb 08 40 00     00:00:00.000  WRITE FPDMA QUEUED
  61 00 08 00 08 00 00 00 5f ea f8 40 00     00:00:00.000  WRITE FPDMA QUEUED
  61 00 08 00 08 00 00 00 5f ea a8 40 00     00:00:00.000  WRITE FPDMA QUEUED

Error 446 [1] occurred at disk power-on lifetime: 17356 hours (723 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  51 -- 40 00 38 00 00 06 2f d9 d0 40 00   at LBA = 0x062fd9d0 = 103799248

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 08 00 38 00 00 06 2f d9 d0 40 00     00:00:00.000  READ FPDMA QUEUED
  60 00 10 00 30 00 00 0b bd 4f 40 40 00     00:00:00.000  READ FPDMA QUEUED
  60 00 04 00 28 00 00 04 aa b2 f8 40 00     00:00:00.000  READ FPDMA QUEUED
  60 00 08 00 20 00 00 00 9e e1 e0 40 00     00:00:00.000  READ FPDMA QUEUED
  60 00 38 00 18 00 00 00 d5 f7 28 40 00     00:00:00.000  READ FPDMA QUEUED

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported

SCT Commands not supported

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 2) ==
0x01  0x008  4            1139  ---  Lifetime Power-On Resets
0x01  0x018  6   6206958882684  ---  Logical Sectors Written
0x01  0x020  6      3078590345  ---  Number of Write Commands
0x01  0x028  6   4735962996792  ---  Logical Sectors Read
0x01  0x030  6      2040306902  ---  Number of Read Commands
0x07  =====  =               =  ===  == Solid State Device Statistics (rev 1) ==
0x07  0x008  1              10  ---  Percentage Used Endurance Indicator
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  4            0  Command failed due to ICRC error
0x0002  4            0  R_ERR response for data FIS
0x0005  4            0  R_ERR response for non-data FIS
0x000a  4            5  Device-to-host register FISes sent due to a COMRESET

