smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Sandisk SATA Cloudspeed Max and GEN2 ESS SSDs
Device Model:     SDLF1CRR-019T-1HA1
Serial Number:    --
LU WWN Device Id: 5 001173 ...
Firmware Version: ZR11RPA1
User Capacity:    1,920,383,410,176 bytes [1.92 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
TRIM Command:     Available, deterministic, zeroed
Device is:        In smartctl database 7.5/5706
ATA Version is:   ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Sep 28 13:04:42 2025 +0330
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(20160) seconds.
Offline data collection
capabilities: 			 (0x5d) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Abort Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (   1) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  5 Reallocated_Sector_Ct   PO--CK   100   100   010    -    0
  9 Power_On_Hours          -O--CK   035   035   000    -    57127 (10 107 0)
 13 Lifetime_UECC_Ct        -O--C-   100   100   001    -    0
 32 Lifetime_Write_AmpFctr  -O----   100   100   000    -    199
 33 Write_AmpFctr           -O----   100   100   000    -    100
170 Reserve_Erase_BlkCt     -O--CK   100   100   000    -    17223
171 Program_Fail_Ct         -O--CK   100   100   000    -    0
172 Erase_Fail_Ct           -O--CK   100   100   000    -    0
175 Lifetime_Die_Failure_Ct -O--CK   100   100   000    -    0
178 SSD_LifeLeft(0.01%)     -O--C-   100   100   000    -    8677
183 LT_Link_Rate_DwnGrd_Ct  -O--CK   100   100   000    -    0
191 Clean_Shutdown_Ct       -O--CK   100   100   000    -    193
192 Unclean_Shutdown_Ct     -O--CK   100   100   000    -    0
194 Temperature_Celsius     -O---K   060   054   030    -    40 (Min/Max 26/46)
196 Lifetime_Retried_Blk_Ct PO-RC-   100   100   010    -    0
199 UDMA_CRC_Error_Count    -OSRCK   100   100   000    -    0
211 Read_Disturb_ReallocEvt -O--CK   100   100   000    -    1
233 Lifetime_Nand_Writes    -O--CK   100   100   000    -    1920000
235 Capacitor_Health        -O--CK   100   100   000    -    0
241 Total_LBAs_Written      -O--CK   100   100   000    -    961472
242 Total_LBAs_Read         -O--CK   100   100   000    -    1063296
244 Therm_Throt_Activation  -O--CK   100   100   000    -    0
245 Drive_Life_Remaining%   -O--C-   087   087   002    -    87
253 SPI_Test_Remaining      -O--C-   100   100   001    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      1  Comprehensive SMART error log
0x03       GPL     R/O      1  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      6  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      2  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x13       GPL     R/O      1  SATA NCQ Send and Receive log
0x30       GPL,SL  R/O      8  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W      2  Host vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 968 (device log contains only the most recent 4 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 968 [3] occurred at disk power-on lifetime: 57099 hours (2379 days + 3 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  04 -- 51 00 50 00 00 40 df ce 50 00 00  Error: ABRT 80 sectors at LBA = 0x40dfce50 = 1088409168

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  35 00 00 00 50 00 00 40 df ce 00 40 00     00:00:00.004  WRITE DMA EXT
  ef 00 03 00 46 00 00 00 00 00 00 00 00     00:00:00.004  SET FEATURES [Set transfer mode]
  ef 00 02 00 00 00 00 00 00 00 00 00 00     00:00:00.004  SET FEATURES [Enable write cache]
  ef 00 90 00 06 00 00 00 00 00 00 00 00     00:00:00.004  SET FEATURES [Disable SATA feature]
  e1 00 00 00 02 00 00 00 00 00 00 00 00     00:00:00.004  IDLE IMMEDIATE

Error 967 [2] occurred at disk power-on lifetime: 57099 hours (2379 days + 3 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  04 -- 41 00 50 00 00 40 df ce 50 00 00  Error: ABRT at LBA = 0x40dfce50 = 1088409168

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 50 00 08 00 00 40 df ce 00 40 80     00:00:00.003  WRITE FPDMA QUEUED
  60 00 20 00 00 00 00 0a b5 23 40 40 80     00:00:00.003  READ FPDMA QUEUED
  60 00 20 00 00 00 00 0a b5 23 20 40 80     00:00:00.003  READ FPDMA QUEUED
  61 02 00 00 08 00 00 40 df cc 00 40 80     00:00:00.003  WRITE FPDMA QUEUED
  60 00 20 00 00 00 00 0a b5 23 00 40 80     00:00:00.003  READ FPDMA QUEUED

Error 966 [1] occurred at disk power-on lifetime: 55986 hours (2332 days + 18 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  04 -- 51 00 00 00 00 00 00 00 ff 00 00

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  e5 00 00 00 00 00 00 00 00 00 00 00 08     00:00:00.003  CHECK POWER MODE
  b4 00 11 00 00 00 00 43 72 79 70 40 08     00:00:00.003  SANITIZE DEVICE
  ec 00 00 00 01 00 00 00 00 00 00 40 08     00:00:00.003  IDENTIFY DEVICE
  b0 00 da 00 00 00 00 00 c2 4f 00 00 08     00:00:00.003  SMART RETURN STATUS
  b0 00 d0 00 01 00 00 00 c2 4f 00 00 08     00:00:00.003  SMART READ DATA

Error 965 [0] occurred at disk power-on lifetime: 55632 hours (2318 days + 0 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  04 -- 51 00 01 00 00 00 00 00 00 00 00  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  2f 00 00 00 01 00 00 00 00 00 00 a0 08     00:00:00.003  READ LOG EXT
  2f 00 00 00 01 00 00 00 00 00 00 a0 08     00:00:00.003  READ LOG EXT
  ef 00 10 00 02 00 00 00 00 00 00 a0 08     00:00:00.003  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 00 00 00 00 00 a0 08     00:00:00.003  IDENTIFY DEVICE
  ef 00 03 00 46 00 00 00 00 00 00 a0 08     00:00:00.003  SET FEATURES [Set transfer mode]

SMART Extended Self-test Log Version: 1 (2 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     56337         -
# 2  Short offline       Completed without error       00%     56314         -
# 3  Short offline       Completed without error       00%     56313         -
# 4  Short offline       Completed without error       00%     56313         -
# 5  Short offline       Completed without error       00%     56313         -
# 6  Short offline       Completed without error       00%     56312         -
# 7  Short offline       Completed without error       00%     56129         -
# 8  Short offline       Completed without error       00%     56128         -
# 9  Short offline       Completed without error       00%     56113         -
#10  Short offline       Completed without error       00%     56113         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       0 (0x0000)
Device State:                        Active (0)
Current Temperature:                    40 Celsius
Power Cycle Min/Max Temperature:     35/40 Celsius
Lifetime    Min/Max Temperature:     26/46 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 41

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/65 Celsius
Min/Max Temperature Limit:            0/70 Celsius
Temperature History Size (Index):    478 (131)

SCT Error Recovery Control:
           Read:    100 (10.0 seconds)
          Write:    100 (10.0 seconds)

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4             193  ---  Lifetime Power-On Resets
0x01  0x010  4           57127  ---  Power-on Hours
0x01  0x018  6   1877892832540  ---  Logical Sectors Written
0x01  0x020  6    242099015713  ---  Number of Write Commands
0x01  0x028  6   2076796341022  ---  Logical Sectors Read
0x01  0x030  6    597852622467  ---  Number of Read Commands
0x01  0x038  6      3793737088  ---  Date and Time TimeStamp
0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
0x04  0x008  4            1467  ---  Number of Reported Uncorrectable Errors
0x04  0x010  4               3  ---  Resets Between Cmd Acceptance and Completion
0x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
0x05  0x008  1              40  ---  Current Temperature
0x05  0x010  1              39  ---  Average Short Term Temperature
0x05  0x018  1              39  ---  Average Long Term Temperature
0x05  0x020  1              46  ---  Highest Temperature
0x05  0x028  1              26  ---  Lowest Temperature
0x05  0x030  1              70  ---  Highest Average Short Term Temperature
0x05  0x038  1              25  ---  Lowest Average Short Term Temperature
0x05  0x040  1              51  ---  Highest Average Long Term Temperature
0x05  0x048  1              25  ---  Lowest Average Long Term Temperature
0x05  0x050  4             240  ---  Time in Over-Temperature
0x05  0x058  1              70  ---  Specified Maximum Operating Temperature
0x05  0x060  4              60  ---  Time in Under-Temperature
0x05  0x068  1               0  ---  Specified Minimum Operating Temperature
0x06  =====  =               =  ===  == Transport Statistics (rev 1) ==
0x06  0x008  4             446  ---  Number of Hardware Resets
0x06  0x010  4             161  ---  Number of ASR Events
0x06  0x018  4               0  ---  Number of Interface CRC Errors
0x07  =====  =               =  ===  == Solid State Device Statistics (rev 1) ==
0x07  0x008  1              13  ---  Percentage Used Endurance Indicator
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x000a  2          495  Device-to-host register FISes sent due to a COMRESET
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS

