smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     WD Blue / Red / Green SSDs
Device Model:     WDC  WDS500G2B0A-00SM50
Serial Number:    --
LU WWN Device Id: 5 001b44 ...
Firmware Version: 401020WD
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available, deterministic, zeroed
Device is:        In smartctl database 7.3/5319
ATA Version is:   ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is:  SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Jun 14 11:01:00 2022 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x11) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  10) minutes.

SMART Attributes Data Structure revision number: 4
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  5 Reallocated_Sector_Ct   -O--CK   100   100   ---    -    0
  9 Power_On_Hours          -O--CK   100   100   ---    -    6528
 12 Power_Cycle_Count       -O--CK   100   100   ---    -    108
165 Block_Erase_Count       -O--CK   100   100   ---    -    2491081006659
166 Minimum_PE_Cycles_TLC   -O--CK   100   100   ---    -    42
167 Max_Bad_Blocks_per_Die  -O--CK   100   100   ---    -    41
168 Maximum_PE_Cycles_TLC   -O--CK   100   100   ---    -    81
169 Total_Bad_Blocks        -O--CK   100   100   ---    -    190
170 Grown_Bad_Blocks        -O--CK   100   100   ---    -    0
171 Program_Fail_Count      -O--CK   100   100   ---    -    0
172 Erase_Fail_Count        -O--CK   100   100   ---    -    0
173 Average_PE_Cycles_TLC   -O--CK   100   100   ---    -    56
174 Unexpected_Power_Loss   -O--CK   100   100   ---    -    4
184 End-to-End_Error        -O--CK   100   100   ---    -    0
187 Reported_Uncorrect      -O--CK   100   100   ---    -    5675
188 Command_Timeout         -O--CK   100   100   ---    -    0
194 Temperature_Celsius     -O---K   070   044   ---    -    30 (Min/Max 22/44)
199 UDMA_CRC_Error_Count    -O--CK   100   100   ---    -    0
230 Media_Wearout_Indicator -O--CK   081   081   ---    -    0x5103053c5103
232 Available_Reservd_Space PO--CK   100   100   004    -    100
233 NAND_GB_Written_TLC     -O--CK   100   100   ---    -    28816
234 NAND_GB_Written_SLC     -O--CK   100   100   ---    -    513669
241 Host_Writes_GiB         ----CK   253   253   ---    -    452728
242 Host_Reads_GiB          ----CK   253   253   ---    -    26101
244 Temp_Throttle_Status    -O--CK   000   100   ---    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      2  Comprehensive SMART error log
0x03       GPL     R/O      1  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x24       GPL     R/O   1957  Current Device Internal Status Data log
0x25       GPL     R/O   1957  Saved Device Internal Status Data log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xde       GPL     VS       8  Device vendor specific log

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 5675 (device log contains only the most recent 4 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 5675 [2] occurred at disk power-on lifetime: 6528 hours (272 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 f8 00 00 1c 5c 8f c0 40 08  Error: UNC at LBA = 0x1c5c8fc0 = 475828160

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 40 00 f8 00 00 1c 5c 8f c0 40 08 21d+17:53:34.949  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 08     00:00:00.000  READ LOG EXT
  60 00 40 00 e8 00 00 1c 5c 8f c0 40 08     00:00:00.000  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 08     00:00:00.000  READ LOG EXT
  60 00 40 00 d8 00 00 1c 5c 8f c0 40 08     00:00:00.000  READ FPDMA QUEUED

Error 5674 [1] occurred at disk power-on lifetime: 6528 hours (272 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 e8 00 00 1c 5c 8f c0 40 08  Error: UNC at LBA = 0x1c5c8fc0 = 475828160

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 40 00 e8 00 00 1c 5c 8f c0 40 08 21d+17:53:34.819  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 08     00:00:00.000  READ LOG EXT
  60 00 40 00 d8 00 00 1c 5c 8f c0 40 08     00:00:00.000  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 08     00:00:00.000  READ LOG EXT
  60 00 40 00 c8 00 00 1c 5c 8f c0 40 08     00:00:00.000  READ FPDMA QUEUED

Error 5673 [0] occurred at disk power-on lifetime: 6528 hours (272 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 d8 00 00 1c 5c 8f c0 40 08  Error: UNC at LBA = 0x1c5c8fc0 = 475828160

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 40 00 d8 00 00 1c 5c 8f c0 40 08 21d+17:53:34.689  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 08     00:00:00.000  READ LOG EXT
  60 00 40 00 c8 00 00 1c 5c 8f c0 40 08     00:00:00.000  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 08     00:00:00.000  READ LOG EXT
  60 00 40 00 b8 00 00 1c 5c 8f c0 40 08     00:00:00.000  READ FPDMA QUEUED

Error 5672 [3] occurred at disk power-on lifetime: 6528 hours (272 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 c8 00 00 1c 5c 8f c0 40 08  Error: UNC at LBA = 0x1c5c8fc0 = 475828160

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 40 00 c8 00 00 1c 5c 8f c0 40 08 21d+17:53:34.559  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 08     00:00:00.000  READ LOG EXT
  60 00 40 00 b8 00 00 1c 5c 8f c0 40 08     00:00:00.000  READ FPDMA QUEUED
  61 00 01 00 b0 00 00 00 00 f3 0b 40 08     00:00:00.000  WRITE FPDMA QUEUED
  06 00 01 00 01 00 00 00 00 00 00 40 08     00:00:00.000  DATA SET MANAGEMENT

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      1872         -

Selective Self-tests/Logging not supported

SCT Commands not supported

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4             108  ---  Lifetime Power-On Resets
0x01  0x010  4            6528  ---  Power-on Hours
0x01  0x018  6    949440327609  ---  Logical Sectors Written
0x01  0x020  6     18309989910  ---  Number of Write Commands
0x01  0x028  6     54739267157  ---  Logical Sectors Read
0x01  0x030  6       249902214  ---  Number of Read Commands
0x07  =====  =               =  ===  == Solid State Device Statistics (rev 1) ==
0x07  0x008  1               5  N--  Percentage Used Endurance Indicator
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  4            0  Command failed due to ICRC error
0x0002  4            0  R_ERR response for data FIS
0x0005  4            0  R_ERR response for non-data FIS
0x000a  4           68  Device-to-host register FISes sent due to a COMRESET

