# Makefile.in generated by automake 1.6.1 from Makefile.am.
# @configure_input@

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# To use this template:
#     1) Define: figs, docname, lang, omffile, sgml_ents although figs, 
#        omffile, and sgml_ents may be empty in your Makefile.am which 
#        will "include" this one 
#     2) Figures must go under figures/ and be in PNG format
#     3) You should only have one document per directory 
#
#        Note that this makefile forces the directory name under
#        $prefix/share/gnome/help/ to be the same as the SGML filename
#        of the document.  This is required by GNOME. eg:
#        $prefix/share/gnome/help/fish_applet/C/fish_applet.sgml
#                                 ^^^^^^^^^^^   ^^^^^^^^^^^
# Definitions:
#   figs         A list of screenshots which will be included in EXTRA_DIST
#                Note that these should reside in figures/ and should be .png
#                files, or you will have to make modifications below.
#   docname      This is the name of the SGML file: <docname>.sgml
#   lang         This is the document locale
#   omffile      This is the name of the OMF file.  Convention is to name
#                it <docname>-<locale>.omf.
#   sgml_ents    This is a list of SGML entities which must be installed 
#                with the main SGML file and included in EXTRA_DIST. 
# eg:
#   figs = \
#          figures/fig1.png            \
#          figures/fig2.png
#   docname = scrollkeeper-manual
#   lang = C
#   omffile=scrollkeeper-manual-C.omf
#   sgml_ents = fdl.sgml
#   include $(top_srcdir)/help/sgmldocs.make
#   dist-hook: app-dist-hook
#
SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ../../..

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :

EXEEXT = @EXEEXT@
OBJEXT = @OBJEXT@
PATH_SEPARATOR = @PATH_SEPARATOR@
AMTAR = @AMTAR@
AWK = @AWK@
BINSH = @BINSH@
CC = @CC@
DEPDIR = @DEPDIR@
DISABLE_SCROLLKEEPER = @DISABLE_SCROLLKEEPER@
GNOMEHELP = @GNOMEHELP@
HAVE_GNOME_CONFIG = @HAVE_GNOME_CONFIG@
HAVE_JW = @HAVE_JW@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
JW = @JW@
LANGUAGES = @LANGUAGES@
LIBS = @LIBS@
MOFILES = @MOFILES@
MSGFMT = @MSGFMT@
P15_INCLUDES = @P15_INCLUDES@
P20_INCLUDES = @P20_INCLUDES@
P21_INCLUDES = @P21_INCLUDES@
P22_INCLUDES = @P22_INCLUDES@
PACKAGE = @PACKAGE@
POFILES = @POFILES@
PYTHON = @PYTHON@
PYTHON15 = @PYTHON15@
PYTHON20 = @PYTHON20@
PYTHON21 = @PYTHON21@
PYTHON22 = @PYTHON22@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RELEASE = @RELEASE@
SCROLLKEEPER_CONFIG = @SCROLLKEEPER_CONFIG@
SCROLLKEEPER_REQUIRED = @SCROLLKEEPER_REQUIRED@
STRIP = @STRIP@
VERSION = @VERSION@
VERSIONSTRING = @VERSIONSTRING@
ZIP = @ZIP@
am__include = @am__include@
am__quote = @am__quote@
install_sh = @install_sh@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
SGML_FILES = gramps-manual.sgml

figs = \
     figures/addmedia.png \
     figures/druidpg1.png \
     figures/editbookmarks.png \
     figures/ep-address.png \
     figures/ep-altname.png \
     figures/ep-attributes.png \
     figures/ep-event.png \
     figures/ep-gallery.png \
     figures/ep-general.png \
     figures/ep-internet.png \
     figures/ep-lds.png \
     figures/ep-notes.png \
     figures/familyview.png \
     figures/filter.png \
     figures/globalmedia.png \
     figures/gotobookmark.png \
     figures/localmedia.png \
     figures/mainwin.png \
     figures/mediaview.png \
     figures/opendb.png \
     figures/pedegreesel.png \
     figures/pedegreeview.png \
     figures/peoplelist.png \
     figures/placelist.png \
     figures/prefs-bars.png \
     figures/prefs-colors.png \
     figures/prefs-dates.png \
     figures/prefs-disp.png \
     figures/prefs-find.png \
     figures/prefs-gen.png \
     figures/prefs-guess.png \
     figures/prefs-ids.png \
     figures/prefs-main.png \
     figures/prefs-media.png \
     figures/prefs-report.png \
     figures/prefs-research.png \
     figures/prefs-revision.png \
     figures/reportsel.png \
     figures/revcontrol.png \
     figures/savecomment.png \
     figures/sourcelist.png \
     figures/sourcerefsel.png \
     figures/toolsel.png


docname = gramps-manual
lang = C
omffile = gramps-manual-C.omf
sgml_ents = 

docdir = $(datadir)/gnome/help/$(docname)/$(lang)

doc_DATA = index.html

sgml_files = $(sgml_ents) $(docname).sgml

omf_dir = $(top_srcdir)/omf-install

EXTRA_DIST = $(sgml_files) $(doc_DATA) $(omffile) $(figs)

CLEANFILES = omf_timestamp

# when doing a distclean, we also want to clear out html files:
CONFIG_CLEAN_FILES = index.html $(docname)/*.html $(docname)/stylesheet-images/*.gif
subdir = doc/gramps-manual/C
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
DIST_SOURCES =
DATA = $(doc_DATA)

DIST_COMMON = Makefile.am Makefile.in
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  Makefile.am $(top_srcdir)/doc/sgmldocs.make $(top_srcdir)/configure.in $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/gramps-manual/C/Makefile
Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
uninstall-info-am:
docDATA_INSTALL = $(INSTALL_DATA)
install-docDATA: $(doc_DATA)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(docdir)
	@list='$(doc_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " $(docDATA_INSTALL) $$d$$p $(DESTDIR)$(docdir)/$$f"; \
	  $(docDATA_INSTALL) $$d$$p $(DESTDIR)$(docdir)/$$f; \
	done

uninstall-docDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(doc_DATA)'; for p in $$list; do \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " rm -f $(DESTDIR)$(docdir)/$$f"; \
	  rm -f $(DESTDIR)$(docdir)/$$f; \
	done
tags: TAGS
TAGS:

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ../../..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)
	$(mkinstalldirs) $(distdir)/figures
	@for file in $(DISTFILES); do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkinstalldirs) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="${top_distdir}" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
check: check-am
all-am: Makefile $(DATA)

installdirs:
	$(mkinstalldirs) $(DESTDIR)$(docdir)

install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am

distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

info: info-am

info-am:

install-data-am: install-docDATA

install-exec-am:

install-info: install-info-am

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

uninstall-am: uninstall-docDATA uninstall-info-am uninstall-local

.PHONY: all all-am check check-am clean clean-generic distclean \
	distclean-generic distdir dvi dvi-am info info-am install \
	install-am install-data install-data-am install-docDATA \
	install-exec install-exec-am install-info install-info-am \
	install-man install-strip installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-generic uninstall uninstall-am \
	uninstall-docDATA uninstall-info-am uninstall-local


all: index.html omf

omf: omf_timestamp

omf_timestamp: $(omffile)
	-for file in $(omffile); do \
	  scrollkeeper-preinstall $(docdir)/$(docname).sgml $$file $(omf_dir)/$$file; \
	done
	touch omf_timestamp

index.html: $(docname)/index.html
	-cp $(docname)/index.html .

# The weird srcdir trick is because the db2html from the Cygnus RPMs
# cannot handle relative filenames.
# The t1 test is for certain versions of jw that create cryptic
# html pages, o fwhich the index is called "t1".  Also, the jw
# script from docbook-utils 0.6.9 does not copy the template 
# stylesheet-images directory like the db2html script does, so 
# we give it a little help (at least for now)

$(docname)/index.html: $(docname).sgml
	-srcdir=`cd $(srcdir) && pwd`;   \
	if test "$(HAVE_JW)" = 'yes' ; then \
	   if test -f /usr/share/sgml/docbook/dsssl-stylesheets/images/next.gif ; then \
	        mkdir -p $$srcdir/$(docname)/stylesheet-images ; \
	   	cp /usr/share/sgml/docbook/dsssl-stylesheets/images/*.gif $$srcdir/$(docname)/stylesheet-images/ ; \
	   fi; \
	   jw -c /etc/sgml/catalog $$srcdir/$(docname).sgml -o $$srcdir/$(docname); \
	else \
	   db2html $$srcdir/$(docname).sgml; \
	fi
	if test -f $(docname)/t1.html; then \
	   cd $(srcdir)/$(docname) && cp t1.html index.html; \
	   cd $(srcdir); \
	fi

$(docname).sgml: $(sgml_ents)
	-ourdir=`cd . && pwd`;  \
	cd $(srcdir);   \
	cp $(sgml_ents) $$ourdir

app-dist-hook: index.html
	-$(mkinstalldirs) $(distdir)/$(docname)/stylesheet-images
	-$(mkinstalldirs) $(distdir)/figures
	-cp $(srcdir)/$(docname)/*.html $(distdir)/$(docname)
	-for file in $(srcdir)/$(docname)/*.css; do \
	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	  cp $$file $(distdir)/$(docname)/$$basefile ; \
	done
	-for file in $(srcdir)/$(docname)/stylesheet-images/*.gif; do \
	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	  cp $$file $(distdir)/$(docname)/stylesheet-images/$$basefile ; \
	done
	-if [ -e topic.dat ]; then \
		cp $(srcdir)/topic.dat $(distdir); \
	 fi

install-data-am: index.html omf
	-$(mkinstalldirs) $(DESTDIR)$(docdir)/stylesheet-images
	-$(mkinstalldirs) $(DESTDIR)$(docdir)/figures
	-cp $(srcdir)/$(sgml_files) $(DESTDIR)$(docdir)
	-for file in $(srcdir)/$(docname)/*.html $(srcdir)/$(docname)/*.css; do \
	  basefile=`echo $$file | sed -e 's,^.*/,,'`; \
	  $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/$$basefile; \
	done
	-for file in $(srcdir)/figures/*.png; do \
	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	  $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/figures/$$basefile; \
	done
	-for file in $(srcdir)/$(docname)/stylesheet-images/*.gif; do \
	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	  $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/stylesheet-images/$$basefile; \
	done
	-if [ -e $(srcdir)/topic.dat ]; then \
		$(INSTALL_DATA) $(srcdir)/topic.dat $(DESTDIR)$(docdir); \
	 fi

$(docname).ps: $(srcdir)/$(docname).sgml
	-srcdir=`cd $(srcdir) && pwd`; \
	db2ps $$srcdir/$(docname).sgml

$(docname).rtf: $(srcdir)/$(docname).sgml
	-srcdir=`cd $(srcdir) && pwd`; \
	db2ps $$srcdir/$(docname).sgml

uninstall-local:
	-for file in $(srcdir)/$(docname)/stylesheet-images/*.gif; do \
	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	  rm -f $(docdir)/stylesheet-images/$$basefile; \
	done
	-for file in $(srcdir)/figures/*.png; do \
	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	  rm -f $(docdir)/figures/$$basefile; \
	done
	-for file in $(srcdir)/$(docname)/*.html $(srcdir)/$(docname)/*.css; do \
	  basefile=`echo $$file | sed -e 's,^.*/,,'`; \
	  rm -f $(DESTDIR)$(docdir)/$$basefile; \
	done
	-for file in $(sgml_files); do \
	  rm -f $(DESTDIR)$(docdir)/$$file; \
	done
	-rmdir $(DESTDIR)$(docdir)/stylesheet-images
	-rmdir $(DESTDIR)$(docdir)/figures
	-rmdir $(DESTDIR)$(docdir)
dist-hook: app-dist-hook
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: