busybox/util-linux/mount.c

2461 lines
65 KiB
C
Raw Normal View History

/* vi: set sw=4 ts=4: */
1999-10-05 21:54:54 +05:30
/*
1999-10-07 14:00:23 +05:30
* Mini mount implementation for busybox
*
1999-10-21 03:38:37 +05:30
* Copyright (C) 1995, 1996 by Bruce Perens <bruce@pixar.com>.
* Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
* Copyright (C) 2005-2006 by Rob Landley <rob@landley.net>
1999-10-07 14:00:23 +05:30
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/
// Design notes: There is no spec for mount. Remind me to write one.
//
// mount_main() calls singlemount() which calls mount_it_now().
//
// mount_main() can loop through /etc/fstab for mount -a
// singlemount() can loop through /etc/filesystems for fstype detection.
// mount_it_now() does the actual mount.
//
//config:config MOUNT
//config: bool "mount (23 kb)"
//config: default y
//config: help
//config: All files and filesystems in Unix are arranged into one big directory
//config: tree. The 'mount' utility is used to graft a filesystem onto a
//config: particular part of the tree. A filesystem can either live on a block
//config: device, or it can be accessible over the network, as is the case with
//config: NFS filesystems.
//config:
//config:config FEATURE_MOUNT_FAKE
//config: bool "Support -f (fake mount)"
//config: default y
//config: depends on MOUNT
//config: help
//config: Enable support for faking a file system mount.
//config:
//config:config FEATURE_MOUNT_VERBOSE
//config: bool "Support -v (verbose)"
//config: default y
//config: depends on MOUNT
//config: help
//config: Enable multi-level -v[vv...] verbose messages. Useful if you
//config: debug mount problems and want to see what is exactly passed
//config: to the kernel.
//config:
//config:config FEATURE_MOUNT_HELPERS
//config: bool "Support mount helpers"
//config: default n
//config: depends on MOUNT
//config: help
//config: Enable mounting of virtual file systems via external helpers.
//config: E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
//config: "obexfs -b00.11.22.33.44.55 /mnt"
//config: Also "mount -t sometype [-o opts] fs /mnt" will try
//config: "sometype [-o opts] fs /mnt" if simple mount syscall fails.
//config: The idea is to use such virtual filesystems in /etc/fstab.
//config:
//config:config FEATURE_MOUNT_LABEL
//config: bool "Support specifying devices by label or UUID"
//config: default y
//config: depends on MOUNT
//config: select VOLUMEID
//config: help
//config: This allows for specifying a device by label or uuid, rather than by
//config: name. This feature utilizes the same functionality as blkid/findfs.
//config:
//config:config FEATURE_MOUNT_NFS
//config: bool "Support mounting NFS file systems on Linux < 2.6.23"
//config: default n
//config: depends on MOUNT
//config: select FEATURE_SYSLOG
//config: help
//config: Enable mounting of NFS file systems on Linux kernels prior
//config: to version 2.6.23. Note that in this case mounting of NFS
//config: over IPv6 will not be possible.
//config:
//config: Note that this option links in RPC support from libc,
//config: which is rather large (~10 kbytes on uclibc).
//config:
//config:config FEATURE_MOUNT_CIFS
//config: bool "Support mounting CIFS/SMB file systems"
//config: default y
//config: depends on MOUNT
//config: help
//config: Enable support for samba mounts.
//config:
//config:config FEATURE_MOUNT_FLAGS
//config: depends on MOUNT
//config: bool "Support lots of -o flags"
//config: default y
//config: help
//config: Without this, mount only supports ro/rw/remount. With this, it
//config: supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
//config: noatime, diratime, nodiratime, loud, bind, move, shared, slave,
//config: private, unbindable, rshared, rslave, rprivate, and runbindable.
//config:
//config:config FEATURE_MOUNT_FSTAB
//config: depends on MOUNT
//config: bool "Support /etc/fstab and -a (mount all)"
//config: default y
//config: help
//config: Support mount all and looking for files in /etc/fstab.
//config:
//config:config FEATURE_MOUNT_OTHERTAB
//config: depends on FEATURE_MOUNT_FSTAB
//config: bool "Support -T <alt_fstab>"
//config: default y
//config: help
//config: Support mount -T (specifying an alternate fstab)
/* On full-blown systems, requires suid for user mounts.
* But it's not unthinkable to have it available in non-suid flavor on some systems,
* for viewing mount table.
* Therefore we use BB_SUID_MAYBE instead of BB_SUID_REQUIRE: */
//applet:IF_MOUNT(APPLET(mount, BB_DIR_BIN, IF_DESKTOP(BB_SUID_MAYBE) IF_NOT_DESKTOP(BB_SUID_DROP)))
//kbuild:lib-$(CONFIG_MOUNT) += mount.o
//usage:#define mount_trivial_usage
//usage: "[OPTIONS] [-o OPT] DEVICE NODE"
//usage:#define mount_full_usage "\n\n"
//usage: "Mount a filesystem. Filesystem autodetection requires /proc.\n"
//usage: "\n -a Mount all filesystems in fstab"
//usage: IF_FEATURE_MOUNT_FAKE(
//usage: IF_FEATURE_MTAB_SUPPORT(
//usage: "\n -f Update /etc/mtab, but don't mount"
//usage: )
//usage: IF_NOT_FEATURE_MTAB_SUPPORT(
//usage: "\n -f Dry run"
//usage: )
//usage: )
//usage: IF_FEATURE_MOUNT_HELPERS(
//usage: "\n -i Don't run mount helper"
//usage: )
//usage: IF_FEATURE_MTAB_SUPPORT(
//usage: "\n -n Don't update /etc/mtab"
//usage: )
//usage: IF_FEATURE_MOUNT_VERBOSE(
//usage: "\n -v Verbose"
//usage: )
////usage: "\n -s Sloppy (ignored)"
//usage: "\n -r Read-only mount"
////usage: "\n -w Read-write mount (default)"
//usage: "\n -t FSTYPE[,...] Filesystem type(s)"
//usage: IF_FEATURE_MOUNT_OTHERTAB(
//usage: "\n -T FILE Read FILE instead of /etc/fstab"
//usage: )
//usage: "\n -O OPT Mount only filesystems with option OPT (-a only)"
//usage: "\n-o OPT:"
//usage: IF_FEATURE_MOUNT_LOOP(
//usage: "\n loop Ignored (loop devices are autodetected)"
//usage: )
//usage: IF_FEATURE_MOUNT_FLAGS(
//usage: "\n [a]sync Writes are [a]synchronous"
//usage: "\n [no]atime Disable/enable updates to inode access times"
//usage: "\n [no]diratime Disable/enable atime updates to directories"
//usage: "\n [no]relatime Disable/enable atime updates relative to modification time"
//usage: "\n [no]dev (Dis)allow use of special device files"
//usage: "\n [no]exec (Dis)allow use of executable files"
//usage: "\n [no]suid (Dis)allow set-user-id-root programs"
//usage: "\n [r]shared Convert [recursively] to a shared subtree"
//usage: "\n [r]slave Convert [recursively] to a slave subtree"
//usage: "\n [r]private Convert [recursively] to a private subtree"
//usage: "\n [un]bindable Make mount point [un]able to be bind mounted"
//usage: "\n [r]bind Bind a file or directory [recursively] to another location"
//usage: "\n move Relocate an existing mount point"
//usage: )
//usage: "\n remount Remount a mounted filesystem, changing flags"
//usage: "\n ro Same as -r"
//usage: "\n"
//usage: "\nThere are filesystem-specific -o flags."
//usage:
//usage:#define mount_example_usage
//usage: "$ mount\n"
//usage: "/dev/hda3 on / type minix (rw)\n"
//usage: "proc on /proc type proc (rw)\n"
//usage: "devpts on /dev/pts type devpts (rw)\n"
//usage: "$ mount /dev/fd0 /mnt -t msdos -o ro\n"
//usage: "$ mount /tmp/diskimage /opt -t ext2 -o loop\n"
//usage: "$ mount cd_image.iso mydir\n"
//usage:#define mount_notes_usage
//usage: "Returns 0 for success, number of failed mounts for -a, or errno for one mount."
1999-10-05 21:54:54 +05:30
#include <mntent.h>
#include <syslog.h>
#include <sys/mount.h>
// Grab more as needed from util-linux's mount/mount_constants.h
#ifndef MS_DIRSYNC
# define MS_DIRSYNC (1 << 7) // Directory modifications are synchronous
#endif
#ifndef MS_UNION
# define MS_UNION (1 << 8)
#endif
#ifndef MS_BIND
# define MS_BIND (1 << 12)
#endif
#ifndef MS_MOVE
# define MS_MOVE (1 << 13)
#endif
#ifndef MS_RECURSIVE
# define MS_RECURSIVE (1 << 14)
#endif
#ifndef MS_SILENT
# define MS_SILENT (1 << 15)
#endif
// The shared subtree stuff, which went in around 2.6.15
#ifndef MS_UNBINDABLE
# define MS_UNBINDABLE (1 << 17)
#endif
#ifndef MS_PRIVATE
# define MS_PRIVATE (1 << 18)
#endif
#ifndef MS_SLAVE
# define MS_SLAVE (1 << 19)
#endif
#ifndef MS_SHARED
# define MS_SHARED (1 << 20)
#endif
#ifndef MS_RELATIME
# define MS_RELATIME (1 << 21)
#endif
#ifndef MS_STRICTATIME
# define MS_STRICTATIME (1 << 24)
#endif
/* Any ~MS_FOO value has this bit set: */
#define BB_MS_INVERTED_VALUE (1u << 31)
#include "libbb.h"
#include "common_bufsiz.h"
#if ENABLE_FEATURE_MOUNT_LABEL
# include "volume_id.h"
#else
# define resolve_mount_spec(fsname) ((void)0)
#endif
// Needed for nfs support only
#include <sys/utsname.h>
#undef TRUE
#undef FALSE
#if ENABLE_FEATURE_MOUNT_NFS
/* This is just a warning of a common mistake. Possibly this should be a
* uclibc faq entry rather than in busybox... */
# if defined(__UCLIBC__) && ! defined(__UCLIBC_HAS_RPC__)
# warning "You probably need to build uClibc with UCLIBC_HAS_RPC for NFS support"
/* not #error, since user may be using e.g. libtirpc instead.
* This might work:
* CONFIG_EXTRA_CFLAGS="-I/usr/include/tirpc"
* CONFIG_EXTRA_LDLIBS="tirpc"
*/
# endif
# include <rpc/rpc.h>
# include <rpc/pmap_prot.h>
# include <rpc/pmap_clnt.h>
#endif
#if defined(__dietlibc__)
// 16.12.2006, Sampo Kellomaki (sampo@iki.fi)
// dietlibc-0.30 does not have implementation of getmntent_r()
static struct mntent *getmntent_r(FILE* stream, struct mntent* result,
2008-07-05 14:48:54 +05:30
char* buffer UNUSED_PARAM, int bufsize UNUSED_PARAM)
{
struct mntent* ment = getmntent(stream);
return memcpy(result, ment, sizeof(*ment));
}
#endif
// Not real flags, but we want to be able to check for this.
enum {
MOUNT_USERS = (1 << 27) * ENABLE_DESKTOP,
MOUNT_NOFAIL = (1 << 28) * ENABLE_DESKTOP,
MOUNT_NOAUTO = (1 << 29),
MOUNT_SWAP = (1 << 30),
MOUNT_FAKEFLAGS = MOUNT_USERS | MOUNT_NOFAIL | MOUNT_NOAUTO | MOUNT_SWAP
};
#define OPTION_STR "o:*t:rwanfvsiO:" IF_FEATURE_MOUNT_OTHERTAB("T:")
enum {
OPT_o = (1 << 0),
OPT_t = (1 << 1),
OPT_r = (1 << 2),
OPT_w = (1 << 3),
OPT_a = (1 << 4),
OPT_n = (1 << 5),
OPT_f = (1 << 6),
OPT_v = (1 << 7),
OPT_s = (1 << 8),
OPT_i = (1 << 9),
OPT_O = (1 << 10),
OPT_T = (1 << 11),
};
#if ENABLE_FEATURE_MTAB_SUPPORT
#define USE_MTAB (!(option_mask32 & OPT_n))
#else
#define USE_MTAB 0
#endif
#if ENABLE_FEATURE_MOUNT_FAKE
#define FAKE_IT (option_mask32 & OPT_f)
#else
#define FAKE_IT 0
#endif
#if ENABLE_FEATURE_MOUNT_HELPERS
#define HELPERS_ALLOWED (!(option_mask32 & OPT_i))
#else
#define HELPERS_ALLOWED 0
#endif
// TODO: more "user" flag compatibility.
// "user" option (from mount manpage):
// Only the user that mounted a filesystem can unmount it again.
// If any user should be able to unmount, then use users instead of user
// in the fstab line. The owner option is similar to the user option,
// with the restriction that the user must be the owner of the special file.
// This may be useful e.g. for /dev/fd if a login script makes
// the console user owner of this device.
// Standard mount options (from -o options or --options),
// with corresponding flags
static const int32_t mount_options[] = {
// MS_FLAGS set a bit. ~MS_FLAGS disable that bit. 0 flags are NOPs.
IF_FEATURE_MOUNT_LOOP(
/* "loop" */ 0,
)
IF_FEATURE_MOUNT_FSTAB(
/* "defaults" */ 0,
/* "quiet" 0 - do not filter out, vfat wants to see it */
/* "noauto" */ MOUNT_NOAUTO,
/* "sw" */ MOUNT_SWAP,
/* "swap" */ MOUNT_SWAP,
IF_DESKTOP(/* "user" */ MOUNT_USERS,)
IF_DESKTOP(/* "users" */ MOUNT_USERS,)
IF_DESKTOP(/* "nofail" */ MOUNT_NOFAIL,)
2008-01-29 15:01:09 +05:30
/* "_netdev" */ 0,
IF_DESKTOP(/* "comment=" */ 0,) /* systemd uses this in fstab */
)
IF_FEATURE_MOUNT_FLAGS(
// vfs flags
/* "nosuid" */ MS_NOSUID,
/* "suid" */ ~MS_NOSUID,
/* "dev" */ ~MS_NODEV,
/* "nodev" */ MS_NODEV,
/* "exec" */ ~MS_NOEXEC,
/* "noexec" */ MS_NOEXEC,
/* "sync" */ MS_SYNCHRONOUS,
/* "dirsync" */ MS_DIRSYNC,
/* "async" */ ~MS_SYNCHRONOUS,
/* "atime" */ ~MS_NOATIME,
/* "noatime" */ MS_NOATIME,
/* "diratime" */ ~MS_NODIRATIME,
/* "nodiratime" */ MS_NODIRATIME,
2008-07-08 08:26:53 +05:30
/* "mand" */ MS_MANDLOCK,
/* "nomand" */ ~MS_MANDLOCK,
2008-08-06 23:44:38 +05:30
/* "relatime" */ MS_RELATIME,
/* "norelatime" */ ~MS_RELATIME,
/* "strictatime" */ MS_STRICTATIME,
/* "loud" */ ~MS_SILENT,
/* "rbind" */ MS_BIND|MS_RECURSIVE,
// action flags
/* "union" */ MS_UNION,
/* "bind" */ MS_BIND,
/* "move" */ MS_MOVE,
/* "shared" */ MS_SHARED,
/* "slave" */ MS_SLAVE,
/* "private" */ MS_PRIVATE,
/* "unbindable" */ MS_UNBINDABLE,
/* "rshared" */ MS_SHARED|MS_RECURSIVE,
/* "rslave" */ MS_SLAVE|MS_RECURSIVE,
/* "rprivate" */ MS_PRIVATE|MS_RECURSIVE,
/* "runbindable" */ MS_UNBINDABLE|MS_RECURSIVE,
)
// Always understood.
/* "ro" */ MS_RDONLY, // vfs flag
/* "rw" */ ~MS_RDONLY, // vfs flag
/* "remount" */ MS_REMOUNT // action flag
1999-10-05 21:54:54 +05:30
};
static const char mount_option_str[] ALIGN1 =
IF_FEATURE_MOUNT_LOOP(
2008-12-10 16:58:30 +05:30
"loop\0"
)
IF_FEATURE_MOUNT_FSTAB(
2008-12-10 16:58:30 +05:30
"defaults\0"
// "quiet\0" - do not filter out, vfat wants to see it
"noauto\0"
"sw\0"
"swap\0"
IF_DESKTOP("user\0")
IF_DESKTOP("users\0")
IF_DESKTOP("nofail\0")
2008-12-10 16:58:30 +05:30
"_netdev\0"
IF_DESKTOP("comment=\0") /* systemd uses this in fstab */
)
IF_FEATURE_MOUNT_FLAGS(
// vfs flags
2008-12-10 16:58:30 +05:30
"nosuid\0"
"suid\0"
"dev\0"
"nodev\0"
"exec\0"
"noexec\0"
"sync\0"
"dirsync\0"
"async\0"
"atime\0"
"noatime\0"
"diratime\0"
"nodiratime\0"
"mand\0"
"nomand\0"
"relatime\0"
"norelatime\0"
"strictatime\0"
2008-12-10 16:58:30 +05:30
"loud\0"
"rbind\0"
// action flags
"union\0"
2008-12-10 16:58:30 +05:30
"bind\0"
"move\0"
"make-shared\0"
"make-slave\0"
"make-private\0"
"make-unbindable\0"
"make-rshared\0"
"make-rslave\0"
"make-rprivate\0"
"make-runbindable\0"
)
// Always understood.
2008-12-10 16:58:30 +05:30
"ro\0" // vfs flag
"rw\0" // vfs flag
"remount\0" // action flag
;
struct globals {
#if ENABLE_FEATURE_MOUNT_NFS
smalluint nfs_mount_version;
#endif
#if ENABLE_FEATURE_MOUNT_VERBOSE
unsigned verbose;
#endif
llist_t *fslist;
char getmntent_buf[1];
} FIX_ALIASING;
enum { GETMNTENT_BUFSIZE = COMMON_BUFSIZE - offsetof(struct globals, getmntent_buf) };
#define G (*(struct globals*)bb_common_bufsiz1)
#define nfs_mount_version (G.nfs_mount_version)
#if ENABLE_FEATURE_MOUNT_VERBOSE
#define verbose (G.verbose )
#else
#define verbose 0
#endif
#define fslist (G.fslist )
#define getmntent_buf (G.getmntent_buf )
#define INIT_G() do { setup_common_bufsiz(); } while (0)
#if ENABLE_FEATURE_MTAB_SUPPORT
/*
* update_mtab_entry_on_move() is used to update entry in case of mount --move.
* we are looking for existing entries mnt_dir which is equal to mnt_fsname of
* input mntent and replace it by new one.
*/
static void FAST_FUNC update_mtab_entry_on_move(const struct mntent *mp)
{
struct mntent *entries, *m;
int i, count;
FILE *mountTable;
mountTable = setmntent(bb_path_mtab_file, "r");
if (!mountTable) {
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_perror_msg(bb_path_mtab_file);
return;
}
entries = NULL;
count = 0;
while ((m = getmntent(mountTable)) != NULL) {
entries = xrealloc_vector(entries, 3, count);
entries[count].mnt_fsname = xstrdup(m->mnt_fsname);
entries[count].mnt_dir = xstrdup(m->mnt_dir);
entries[count].mnt_type = xstrdup(m->mnt_type);
entries[count].mnt_opts = xstrdup(m->mnt_opts);
entries[count].mnt_freq = m->mnt_freq;
entries[count].mnt_passno = m->mnt_passno;
count++;
}
endmntent(mountTable);
mountTable = setmntent(bb_path_mtab_file, "w");
if (mountTable) {
for (i = 0; i < count; i++) {
if (strcmp(entries[i].mnt_dir, mp->mnt_fsname) != 0)
addmntent(mountTable, &entries[i]);
else
addmntent(mountTable, mp);
}
endmntent(mountTable);
} else if (errno != EROFS)
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_perror_msg(bb_path_mtab_file);
if (ENABLE_FEATURE_CLEAN_UP) {
for (i = 0; i < count; i++) {
free(entries[i].mnt_fsname);
free(entries[i].mnt_dir);
free(entries[i].mnt_type);
free(entries[i].mnt_opts);
}
free(entries);
}
}
#endif
#if ENABLE_FEATURE_MOUNT_VERBOSE
static int verbose_mount(const char *source, const char *target,
const char *filesystemtype,
unsigned long mountflags, const void *data)
{
int rc;
errno = 0;
rc = mount(source, target, filesystemtype, mountflags, data);
if (verbose >= 2)
bb_perror_msg("mount('%s','%s','%s',0x%08lx,'%s'):%d",
source, target, filesystemtype,
mountflags, (char*)data, rc);
return rc;
}
#else
#define verbose_mount(...) mount(__VA_ARGS__)
#endif
// Append mount options to string
static void append_mount_options(char **oldopts, const char *newopts)
{
2006-09-17 20:30:58 +05:30
if (*oldopts && **oldopts) {
// Do not insert options which are already there
while (newopts[0]) {
char *p;
int len = strlen(newopts);
p = strchr(newopts, ',');
if (p) len = p - newopts;
p = *oldopts;
while (1) {
if (!strncmp(p, newopts, len)
&& (p[len] == ',' || p[len] == '\0'))
goto skip;
p = strchr(p,',');
2007-04-12 06:02:05 +05:30
if (!p) break;
p++;
}
p = xasprintf("%s,%.*s", *oldopts, len, newopts);
free(*oldopts);
*oldopts = p;
skip:
newopts += len;
while (newopts[0] == ',') newopts++;
}
} else {
if (ENABLE_FEATURE_CLEAN_UP) free(*oldopts);
*oldopts = xstrdup(newopts);
}
}
// Use the mount_options list to parse options into flags.
// Also update list of unrecognized options if unrecognized != NULL
static unsigned long parse_mount_options(char *options, char **unrecognized)
1999-10-05 21:54:54 +05:30
{
unsigned long flags = MS_SILENT;
Major rewrite of mount, umount, losetup. Untangled lots of code, shrunk things down a bit, fixed a number of funky corner cases, added support for several new features (things like mount --move, mount --bind, lazy unounts, automatic detection of loop mounts, and so on). Probably broke several other things, but it's fixable. (Bang on it, tell me what doesn't work for you...) Note: you no longer need to say "-o loop". It does that for you when necessary. Still need to add "user mount" support, which involves making mount suid. Not too hard to do under the new infrastructure, just haven't done it yet... The previous code had the following notes, that belong in the version control comments: - * 3/21/1999 Charles P. Wright <cpwright@cpwright.com> - * searches through fstab when -a is passed - * will try mounting stuff with all fses when passed -t auto - * - * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab. - * - * 1999-10-07 Erik Andersen <andersen@codepoet.org>. - * Rewrite of a lot of code. Removed mtab usage (I plan on - * putting it back as a compile-time option some time), - * major adjustments to option parsing, and some serious - * dieting all around. - * - * 1999-11-06 mtab support is back - andersee - * - * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's - * mount to add loop support. - * - * 2000-04-30 Dave Cinege <dcinege@psychosis.com> - * Rewrote fstab while loop and lower mount section. Can now do - * single mounts from fstab. Can override fstab options for single - * mount. Common mount_one call for single mounts and 'all'. Fixed - * mtab updating and stale entries. Removed 'remount' default. - *
2005-08-11 02:05:54 +05:30
// Loop through options
for (;;) {
unsigned i;
char *comma = strchr(options, ',');
const char *option_str = mount_option_str;
if (comma) *comma = '\0';
// FIXME: use hasmntopt()
Major rewrite of mount, umount, losetup. Untangled lots of code, shrunk things down a bit, fixed a number of funky corner cases, added support for several new features (things like mount --move, mount --bind, lazy unounts, automatic detection of loop mounts, and so on). Probably broke several other things, but it's fixable. (Bang on it, tell me what doesn't work for you...) Note: you no longer need to say "-o loop". It does that for you when necessary. Still need to add "user mount" support, which involves making mount suid. Not too hard to do under the new infrastructure, just haven't done it yet... The previous code had the following notes, that belong in the version control comments: - * 3/21/1999 Charles P. Wright <cpwright@cpwright.com> - * searches through fstab when -a is passed - * will try mounting stuff with all fses when passed -t auto - * - * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab. - * - * 1999-10-07 Erik Andersen <andersen@codepoet.org>. - * Rewrite of a lot of code. Removed mtab usage (I plan on - * putting it back as a compile-time option some time), - * major adjustments to option parsing, and some serious - * dieting all around. - * - * 1999-11-06 mtab support is back - andersee - * - * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's - * mount to add loop support. - * - * 2000-04-30 Dave Cinege <dcinege@psychosis.com> - * Rewrote fstab while loop and lower mount section. Can now do - * single mounts from fstab. Can override fstab options for single - * mount. Common mount_one call for single mounts and 'all'. Fixed - * mtab updating and stale entries. Removed 'remount' default. - *
2005-08-11 02:05:54 +05:30
// Find this option in mount_options
for (i = 0; i < ARRAY_SIZE(mount_options); i++) {
unsigned opt_len = strlen(option_str);
if (strncasecmp(option_str, options, opt_len) == 0
&& (options[opt_len] == '\0'
/* or is it "comment=" thingy in fstab? */
IF_FEATURE_MOUNT_FSTAB(IF_DESKTOP( || option_str[opt_len-1] == '=' ))
)
) {
unsigned long fl = mount_options[i];
if (fl & BB_MS_INVERTED_VALUE)
flags &= fl;
else
flags |= fl;
goto found;
}
option_str += opt_len + 1;
}
// We did not recognize this option.
// If "unrecognized" is not NULL, append option there.
// Note that we should not append *empty* option -
// in this case we want to pass NULL, not "", to "data"
// parameter of mount(2) syscall.
// This is crucial for filesystems that don't accept
// any arbitrary mount options, like cgroup fs:
// "mount -t cgroup none /mnt"
if (options[0] && unrecognized) {
Major rewrite of mount, umount, losetup. Untangled lots of code, shrunk things down a bit, fixed a number of funky corner cases, added support for several new features (things like mount --move, mount --bind, lazy unounts, automatic detection of loop mounts, and so on). Probably broke several other things, but it's fixable. (Bang on it, tell me what doesn't work for you...) Note: you no longer need to say "-o loop". It does that for you when necessary. Still need to add "user mount" support, which involves making mount suid. Not too hard to do under the new infrastructure, just haven't done it yet... The previous code had the following notes, that belong in the version control comments: - * 3/21/1999 Charles P. Wright <cpwright@cpwright.com> - * searches through fstab when -a is passed - * will try mounting stuff with all fses when passed -t auto - * - * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab. - * - * 1999-10-07 Erik Andersen <andersen@codepoet.org>. - * Rewrite of a lot of code. Removed mtab usage (I plan on - * putting it back as a compile-time option some time), - * major adjustments to option parsing, and some serious - * dieting all around. - * - * 1999-11-06 mtab support is back - andersee - * - * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's - * mount to add loop support. - * - * 2000-04-30 Dave Cinege <dcinege@psychosis.com> - * Rewrote fstab while loop and lower mount section. Can now do - * single mounts from fstab. Can override fstab options for single - * mount. Common mount_one call for single mounts and 'all'. Fixed - * mtab updating and stale entries. Removed 'remount' default. - *
2005-08-11 02:05:54 +05:30
// Add it to strflags, to pass on to kernel
char *p = *unrecognized;
unsigned len = p ? strlen(p) : 0;
*unrecognized = p = xrealloc(p, len + strlen(options) + 2);
2006-03-20 23:37:50 +05:30
Major rewrite of mount, umount, losetup. Untangled lots of code, shrunk things down a bit, fixed a number of funky corner cases, added support for several new features (things like mount --move, mount --bind, lazy unounts, automatic detection of loop mounts, and so on). Probably broke several other things, but it's fixable. (Bang on it, tell me what doesn't work for you...) Note: you no longer need to say "-o loop". It does that for you when necessary. Still need to add "user mount" support, which involves making mount suid. Not too hard to do under the new infrastructure, just haven't done it yet... The previous code had the following notes, that belong in the version control comments: - * 3/21/1999 Charles P. Wright <cpwright@cpwright.com> - * searches through fstab when -a is passed - * will try mounting stuff with all fses when passed -t auto - * - * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab. - * - * 1999-10-07 Erik Andersen <andersen@codepoet.org>. - * Rewrite of a lot of code. Removed mtab usage (I plan on - * putting it back as a compile-time option some time), - * major adjustments to option parsing, and some serious - * dieting all around. - * - * 1999-11-06 mtab support is back - andersee - * - * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's - * mount to add loop support. - * - * 2000-04-30 Dave Cinege <dcinege@psychosis.com> - * Rewrote fstab while loop and lower mount section. Can now do - * single mounts from fstab. Can override fstab options for single - * mount. Common mount_one call for single mounts and 'all'. Fixed - * mtab updating and stale entries. Removed 'remount' default. - *
2005-08-11 02:05:54 +05:30
// Comma separated if it's not the first one
if (len) p[len++] = ',';
strcpy(p + len, options);
}
found:
if (!comma)
break;
// Advance to next option
*comma = ',';
options = ++comma;
}
2006-03-20 23:37:50 +05:30
return flags;
1999-10-05 21:54:54 +05:30
}
// Return a list of all block device backed filesystems
static llist_t *get_block_backed_filesystems(void)
{
2007-04-14 04:52:00 +05:30
static const char filesystems[2][sizeof("/proc/filesystems")] = {
2006-10-13 04:12:33 +05:30
"/etc/filesystems",
"/proc/filesystems",
};
char *fs, *buf;
llist_t *list = NULL;
int i;
FILE *f;
2007-04-14 04:52:00 +05:30
for (i = 0; i < 2; i++) {
f = fopen_for_read(filesystems[i]);
2006-09-17 20:30:58 +05:30
if (!f) continue;
2006-03-20 23:37:50 +05:30
while ((buf = xmalloc_fgetline(f)) != NULL) {
libbb: introduce and use is_prefixed_with() function old new delta is_prefixed_with - 18 +18 complete_username 78 77 -1 man_main 737 735 -2 fsck_device 429 427 -2 unpack_ar_archive 80 76 -4 strip_unsafe_prefix 105 101 -4 singlemount 1054 1050 -4 rtc_adjtime_is_utc 90 86 -4 resolve_mount_spec 88 84 -4 parse_one_line 1029 1025 -4 parse_conf 1460 1456 -4 may_wakeup 83 79 -4 loadkmap_main 219 215 -4 get_irqs_from_stat 103 99 -4 get_header_cpio 913 909 -4 findfs_main 79 75 -4 fbsplash_main 1230 1226 -4 load_crontab 776 771 -5 expand_vars_to_list 1151 1146 -5 date_main 881 876 -5 skip_dev_pfx 30 24 -6 make_device 2199 2193 -6 complete_cmd_dir_file 773 767 -6 run_applet_and_exit 715 708 -7 uudecode_main 321 313 -8 pwdx_main 197 189 -8 execute 568 560 -8 i2cdetect_main 1186 1176 -10 procps_scan 1242 1230 -12 procps_read_smaps 1017 1005 -12 process_module 746 734 -12 patch_main 1903 1891 -12 nfsmount 3572 3560 -12 stack_machine 126 112 -14 process_timer_stats 449 435 -14 match_fstype 111 97 -14 do_ipaddr 1344 1330 -14 open_list_and_close 359 343 -16 get_header_tar 1795 1779 -16 prepend_new_eth_table 340 323 -17 fsck_main 1811 1794 -17 find_iface_state 56 38 -18 dnsd_main 1321 1303 -18 base_device 179 158 -21 find_keyword 104 82 -22 handle_incoming_and_exit 2785 2762 -23 parse_and_put_prompt 774 746 -28 modinfo 347 317 -30 find_action 204 171 -33 update_passwd 1470 1436 -34 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 0/49 up/down: 18/-540) Total: -522 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-03-12 22:18:34 +05:30
if (is_prefixed_with(buf, "nodev") && isspace(buf[5]))
goto next;
2006-10-25 18:16:03 +05:30
fs = skip_whitespace(buf);
if (*fs == '#' || *fs == '*' || !*fs)
goto next;
2006-03-20 23:37:50 +05:30
2006-10-13 04:12:33 +05:30
llist_add_to_end(&list, xstrdup(fs));
next:
2006-10-13 04:12:33 +05:30
free(buf);
}
if (ENABLE_FEATURE_CLEAN_UP) fclose(f);
}
return list;
}
2002-08-23 00:11:20 +05:30
#if ENABLE_FEATURE_CLEAN_UP
static void delete_block_backed_filesystems(void)
{
llist_free(fslist, free);
}
#else
void delete_block_backed_filesystems(void);
#endif
Major rewrite of mount, umount, losetup. Untangled lots of code, shrunk things down a bit, fixed a number of funky corner cases, added support for several new features (things like mount --move, mount --bind, lazy unounts, automatic detection of loop mounts, and so on). Probably broke several other things, but it's fixable. (Bang on it, tell me what doesn't work for you...) Note: you no longer need to say "-o loop". It does that for you when necessary. Still need to add "user mount" support, which involves making mount suid. Not too hard to do under the new infrastructure, just haven't done it yet... The previous code had the following notes, that belong in the version control comments: - * 3/21/1999 Charles P. Wright <cpwright@cpwright.com> - * searches through fstab when -a is passed - * will try mounting stuff with all fses when passed -t auto - * - * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab. - * - * 1999-10-07 Erik Andersen <andersen@codepoet.org>. - * Rewrite of a lot of code. Removed mtab usage (I plan on - * putting it back as a compile-time option some time), - * major adjustments to option parsing, and some serious - * dieting all around. - * - * 1999-11-06 mtab support is back - andersee - * - * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's - * mount to add loop support. - * - * 2000-04-30 Dave Cinege <dcinege@psychosis.com> - * Rewrote fstab while loop and lower mount section. Can now do - * single mounts from fstab. Can override fstab options for single - * mount. Common mount_one call for single mounts and 'all'. Fixed - * mtab updating and stale entries. Removed 'remount' default. - *
2005-08-11 02:05:54 +05:30
// Perform actual mount of specific filesystem at specific location.
2006-09-17 20:30:58 +05:30
// NB: mp->xxx fields may be trashed on exit
static int mount_it_now(struct mntent *mp, unsigned long vfsflags, char *filteropts)
{
int rc = 0;
vfsflags &= ~(unsigned long)MOUNT_FAKEFLAGS;
if (FAKE_IT) {
if (verbose >= 2)
bb_error_msg("would do mount('%s','%s','%s',0x%08lx,'%s')",
mp->mnt_fsname, mp->mnt_dir, mp->mnt_type,
vfsflags, filteropts);
goto mtab;
}
// Mount, with fallback to read-only if necessary.
2006-09-17 20:30:58 +05:30
for (;;) {
errno = 0;
rc = verbose_mount(mp->mnt_fsname, mp->mnt_dir, mp->mnt_type,
vfsflags, filteropts);
// If mount failed, try
// helper program mount.<mnt_type>
if (HELPERS_ALLOWED && rc && mp->mnt_type) {
char *args[8];
int errno_save = errno;
args[0] = xasprintf("mount.%s", mp->mnt_type);
rc = 1;
if (FAKE_IT)
args[rc++] = (char *)"-f";
if (ENABLE_FEATURE_MTAB_SUPPORT && !USE_MTAB)
args[rc++] = (char *)"-n";
args[rc++] = mp->mnt_fsname;
args[rc++] = mp->mnt_dir;
if (filteropts) {
args[rc++] = (char *)"-o";
args[rc++] = filteropts;
}
args[rc] = NULL;
rc = spawn_and_wait(args);
free(args[0]);
if (!rc)
break;
errno = errno_save;
}
if (!rc || (vfsflags & MS_RDONLY) || (errno != EACCES && errno != EROFS))
break;
if (!(vfsflags & MS_SILENT))
bb_error_msg("%s is write-protected, mounting read-only",
mp->mnt_fsname);
vfsflags |= MS_RDONLY;
2001-04-17 10:18:51 +05:30
}
// Abort entirely if permission denied.
2002-08-23 00:11:20 +05:30
if (rc && errno == EPERM)
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg_and_die(bb_msg_perm_denied_are_you_root);
Major rewrite of mount, umount, losetup. Untangled lots of code, shrunk things down a bit, fixed a number of funky corner cases, added support for several new features (things like mount --move, mount --bind, lazy unounts, automatic detection of loop mounts, and so on). Probably broke several other things, but it's fixable. (Bang on it, tell me what doesn't work for you...) Note: you no longer need to say "-o loop". It does that for you when necessary. Still need to add "user mount" support, which involves making mount suid. Not too hard to do under the new infrastructure, just haven't done it yet... The previous code had the following notes, that belong in the version control comments: - * 3/21/1999 Charles P. Wright <cpwright@cpwright.com> - * searches through fstab when -a is passed - * will try mounting stuff with all fses when passed -t auto - * - * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab. - * - * 1999-10-07 Erik Andersen <andersen@codepoet.org>. - * Rewrite of a lot of code. Removed mtab usage (I plan on - * putting it back as a compile-time option some time), - * major adjustments to option parsing, and some serious - * dieting all around. - * - * 1999-11-06 mtab support is back - andersee - * - * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's - * mount to add loop support. - * - * 2000-04-30 Dave Cinege <dcinege@psychosis.com> - * Rewrote fstab while loop and lower mount section. Can now do - * single mounts from fstab. Can override fstab options for single - * mount. Common mount_one call for single mounts and 'all'. Fixed - * mtab updating and stale entries. Removed 'remount' default. - *
2005-08-11 02:05:54 +05:30
// If the mount was successful, and we're maintaining an old-style
// mtab file by hand, add the new entry to it now.
mtab:
if (USE_MTAB && !rc && !(vfsflags & MS_REMOUNT)) {
char *fsname;
FILE *mountTable = setmntent(bb_path_mtab_file, "a+");
const char *option_str = mount_option_str;
int i;
Major rewrite of mount, umount, losetup. Untangled lots of code, shrunk things down a bit, fixed a number of funky corner cases, added support for several new features (things like mount --move, mount --bind, lazy unounts, automatic detection of loop mounts, and so on). Probably broke several other things, but it's fixable. (Bang on it, tell me what doesn't work for you...) Note: you no longer need to say "-o loop". It does that for you when necessary. Still need to add "user mount" support, which involves making mount suid. Not too hard to do under the new infrastructure, just haven't done it yet... The previous code had the following notes, that belong in the version control comments: - * 3/21/1999 Charles P. Wright <cpwright@cpwright.com> - * searches through fstab when -a is passed - * will try mounting stuff with all fses when passed -t auto - * - * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab. - * - * 1999-10-07 Erik Andersen <andersen@codepoet.org>. - * Rewrite of a lot of code. Removed mtab usage (I plan on - * putting it back as a compile-time option some time), - * major adjustments to option parsing, and some serious - * dieting all around. - * - * 1999-11-06 mtab support is back - andersee - * - * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's - * mount to add loop support. - * - * 2000-04-30 Dave Cinege <dcinege@psychosis.com> - * Rewrote fstab while loop and lower mount section. Can now do - * single mounts from fstab. Can override fstab options for single - * mount. Common mount_one call for single mounts and 'all'. Fixed - * mtab updating and stale entries. Removed 'remount' default. - *
2005-08-11 02:05:54 +05:30
if (!mountTable) {
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_perror_msg(bb_path_mtab_file);
goto ret;
}
Major rewrite of mount, umount, losetup. Untangled lots of code, shrunk things down a bit, fixed a number of funky corner cases, added support for several new features (things like mount --move, mount --bind, lazy unounts, automatic detection of loop mounts, and so on). Probably broke several other things, but it's fixable. (Bang on it, tell me what doesn't work for you...) Note: you no longer need to say "-o loop". It does that for you when necessary. Still need to add "user mount" support, which involves making mount suid. Not too hard to do under the new infrastructure, just haven't done it yet... The previous code had the following notes, that belong in the version control comments: - * 3/21/1999 Charles P. Wright <cpwright@cpwright.com> - * searches through fstab when -a is passed - * will try mounting stuff with all fses when passed -t auto - * - * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab. - * - * 1999-10-07 Erik Andersen <andersen@codepoet.org>. - * Rewrite of a lot of code. Removed mtab usage (I plan on - * putting it back as a compile-time option some time), - * major adjustments to option parsing, and some serious - * dieting all around. - * - * 1999-11-06 mtab support is back - andersee - * - * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's - * mount to add loop support. - * - * 2000-04-30 Dave Cinege <dcinege@psychosis.com> - * Rewrote fstab while loop and lower mount section. Can now do - * single mounts from fstab. Can override fstab options for single - * mount. Common mount_one call for single mounts and 'all'. Fixed - * mtab updating and stale entries. Removed 'remount' default. - *
2005-08-11 02:05:54 +05:30
// Add vfs string flags
for (i = 0; mount_options[i] != MS_REMOUNT; i++) {
if (mount_options[i] > 0 && (mount_options[i] & vfsflags))
append_mount_options(&(mp->mnt_opts), option_str);
option_str += strlen(option_str) + 1;
}
// Remove trailing / (if any) from directory we mounted on
i = strlen(mp->mnt_dir) - 1;
while (i > 0 && mp->mnt_dir[i] == '/')
mp->mnt_dir[i--] = '\0';
// Convert to canonical pathnames as needed
mp->mnt_dir = bb_simplify_path(mp->mnt_dir);
fsname = NULL;
if (!mp->mnt_type || !*mp->mnt_type) { // bind mount
mp->mnt_fsname = fsname = bb_simplify_path(mp->mnt_fsname);
mp->mnt_type = (char*)"bind";
}
mp->mnt_freq = mp->mnt_passno = 0;
// Write and close
#if ENABLE_FEATURE_MTAB_SUPPORT
if (vfsflags & MS_MOVE)
update_mtab_entry_on_move(mp);
else
#endif
addmntent(mountTable, mp);
Major rewrite of mount, umount, losetup. Untangled lots of code, shrunk things down a bit, fixed a number of funky corner cases, added support for several new features (things like mount --move, mount --bind, lazy unounts, automatic detection of loop mounts, and so on). Probably broke several other things, but it's fixable. (Bang on it, tell me what doesn't work for you...) Note: you no longer need to say "-o loop". It does that for you when necessary. Still need to add "user mount" support, which involves making mount suid. Not too hard to do under the new infrastructure, just haven't done it yet... The previous code had the following notes, that belong in the version control comments: - * 3/21/1999 Charles P. Wright <cpwright@cpwright.com> - * searches through fstab when -a is passed - * will try mounting stuff with all fses when passed -t auto - * - * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab. - * - * 1999-10-07 Erik Andersen <andersen@codepoet.org>. - * Rewrite of a lot of code. Removed mtab usage (I plan on - * putting it back as a compile-time option some time), - * major adjustments to option parsing, and some serious - * dieting all around. - * - * 1999-11-06 mtab support is back - andersee - * - * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's - * mount to add loop support. - * - * 2000-04-30 Dave Cinege <dcinege@psychosis.com> - * Rewrote fstab while loop and lower mount section. Can now do - * single mounts from fstab. Can override fstab options for single - * mount. Common mount_one call for single mounts and 'all'. Fixed - * mtab updating and stale entries. Removed 'remount' default. - *
2005-08-11 02:05:54 +05:30
endmntent(mountTable);
if (ENABLE_FEATURE_CLEAN_UP) {
free(mp->mnt_dir);
free(fsname);
}
2001-05-04 20:19:58 +05:30
}
ret:
return rc;
}
#if ENABLE_FEATURE_MOUNT_NFS
/*
* Linux NFS mount
* Copyright (C) 1993 Rick Sladkey <jrs@world.std.com>
*
* Licensed under GPLv2, see file LICENSE in this source tree.
*
* Wed Feb 8 12:51:48 1995, biro@yggdrasil.com (Ross Biro): allow all port
* numbers to be specified on the command line.
*
* Fri, 8 Mar 1996 18:01:39, Swen Thuemmler <swen@uni-paderborn.de>:
* Omit the call to connect() for Linux version 1.3.11 or later.
*
* Wed Oct 1 23:55:28 1997: Dick Streefland <dick_streefland@tasking.com>
* Implemented the "bg", "fg" and "retry" mount options for NFS.
*
* 1999-02-22 Arkadiusz Mickiewicz <misiek@misiek.eu.org>
* - added Native Language Support
*
* Modified by Olaf Kirch and Trond Myklebust for new NFS code,
* plus NFSv3 stuff.
*/
#define MOUNTPORT 635
#define MNTPATHLEN 1024
#define MNTNAMLEN 255
#define FHSIZE 32
#define FHSIZE3 64
typedef char fhandle[FHSIZE];
typedef struct {
unsigned int fhandle3_len;
char *fhandle3_val;
} fhandle3;
enum mountstat3 {
MNT_OK = 0,
MNT3ERR_PERM = 1,
MNT3ERR_NOENT = 2,
MNT3ERR_IO = 5,
MNT3ERR_ACCES = 13,
MNT3ERR_NOTDIR = 20,
MNT3ERR_INVAL = 22,
MNT3ERR_NAMETOOLONG = 63,
MNT3ERR_NOTSUPP = 10004,
MNT3ERR_SERVERFAULT = 10006,
};
typedef enum mountstat3 mountstat3;
struct fhstatus {
unsigned int fhs_status;
union {
fhandle fhs_fhandle;
} fhstatus_u;
};
typedef struct fhstatus fhstatus;
struct mountres3_ok {
fhandle3 fhandle;
struct {
unsigned int auth_flavours_len;
char *auth_flavours_val;
} auth_flavours;
};
typedef struct mountres3_ok mountres3_ok;
struct mountres3 {
mountstat3 fhs_status;
union {
mountres3_ok mountinfo;
} mountres3_u;
};
typedef struct mountres3 mountres3;
typedef char *dirpath;
typedef char *name;
typedef struct mountbody *mountlist;
struct mountbody {
name ml_hostname;
dirpath ml_directory;
mountlist ml_next;
};
typedef struct mountbody mountbody;
Major rewrite of mount, umount, losetup. Untangled lots of code, shrunk things down a bit, fixed a number of funky corner cases, added support for several new features (things like mount --move, mount --bind, lazy unounts, automatic detection of loop mounts, and so on). Probably broke several other things, but it's fixable. (Bang on it, tell me what doesn't work for you...) Note: you no longer need to say "-o loop". It does that for you when necessary. Still need to add "user mount" support, which involves making mount suid. Not too hard to do under the new infrastructure, just haven't done it yet... The previous code had the following notes, that belong in the version control comments: - * 3/21/1999 Charles P. Wright <cpwright@cpwright.com> - * searches through fstab when -a is passed - * will try mounting stuff with all fses when passed -t auto - * - * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab. - * - * 1999-10-07 Erik Andersen <andersen@codepoet.org>. - * Rewrite of a lot of code. Removed mtab usage (I plan on - * putting it back as a compile-time option some time), - * major adjustments to option parsing, and some serious - * dieting all around. - * - * 1999-11-06 mtab support is back - andersee - * - * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's - * mount to add loop support. - * - * 2000-04-30 Dave Cinege <dcinege@psychosis.com> - * Rewrote fstab while loop and lower mount section. Can now do - * single mounts from fstab. Can override fstab options for single - * mount. Common mount_one call for single mounts and 'all'. Fixed - * mtab updating and stale entries. Removed 'remount' default. - *
2005-08-11 02:05:54 +05:30
typedef struct groupnode *groups;
struct groupnode {
name gr_name;
groups gr_next;
};
typedef struct groupnode groupnode;
2006-03-20 23:37:50 +05:30
typedef struct exportnode *exports;
struct exportnode {
dirpath ex_dir;
groups ex_groups;
exports ex_next;
};
typedef struct exportnode exportnode;
2001-08-10 20:35:27 +05:30
struct ppathcnf {
int pc_link_max;
short pc_max_canon;
short pc_max_input;
short pc_name_max;
short pc_path_max;
short pc_pipe_buf;
uint8_t pc_vdisable;
char pc_xxx;
short pc_mask[2];
};
typedef struct ppathcnf ppathcnf;
1999-10-05 21:54:54 +05:30
#define MOUNTPROG 100005
#define MOUNTVERS 1
#define MOUNTPROC_NULL 0
#define MOUNTPROC_MNT 1
#define MOUNTPROC_DUMP 2
#define MOUNTPROC_UMNT 3
#define MOUNTPROC_UMNTALL 4
#define MOUNTPROC_EXPORT 5
#define MOUNTPROC_EXPORTALL 6
2006-01-25 05:38:53 +05:30
#define MOUNTVERS_POSIX 2
Major rewrite of mount, umount, losetup. Untangled lots of code, shrunk things down a bit, fixed a number of funky corner cases, added support for several new features (things like mount --move, mount --bind, lazy unounts, automatic detection of loop mounts, and so on). Probably broke several other things, but it's fixable. (Bang on it, tell me what doesn't work for you...) Note: you no longer need to say "-o loop". It does that for you when necessary. Still need to add "user mount" support, which involves making mount suid. Not too hard to do under the new infrastructure, just haven't done it yet... The previous code had the following notes, that belong in the version control comments: - * 3/21/1999 Charles P. Wright <cpwright@cpwright.com> - * searches through fstab when -a is passed - * will try mounting stuff with all fses when passed -t auto - * - * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab. - * - * 1999-10-07 Erik Andersen <andersen@codepoet.org>. - * Rewrite of a lot of code. Removed mtab usage (I plan on - * putting it back as a compile-time option some time), - * major adjustments to option parsing, and some serious - * dieting all around. - * - * 1999-11-06 mtab support is back - andersee - * - * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's - * mount to add loop support. - * - * 2000-04-30 Dave Cinege <dcinege@psychosis.com> - * Rewrote fstab while loop and lower mount section. Can now do - * single mounts from fstab. Can override fstab options for single - * mount. Common mount_one call for single mounts and 'all'. Fixed - * mtab updating and stale entries. Removed 'remount' default. - *
2005-08-11 02:05:54 +05:30
#define MOUNTPROC_PATHCONF 7
#define MOUNT_V3 3
#define MOUNTPROC3_NULL 0
#define MOUNTPROC3_MNT 1
#define MOUNTPROC3_DUMP 2
#define MOUNTPROC3_UMNT 3
#define MOUNTPROC3_UMNTALL 4
#define MOUNTPROC3_EXPORT 5
2006-03-20 23:37:50 +05:30
enum {
#ifndef NFS_FHSIZE
NFS_FHSIZE = 32,
#endif
#ifndef NFS_PORT
NFS_PORT = 2049
#endif
};
Major rewrite of mount, umount, losetup. Untangled lots of code, shrunk things down a bit, fixed a number of funky corner cases, added support for several new features (things like mount --move, mount --bind, lazy unounts, automatic detection of loop mounts, and so on). Probably broke several other things, but it's fixable. (Bang on it, tell me what doesn't work for you...) Note: you no longer need to say "-o loop". It does that for you when necessary. Still need to add "user mount" support, which involves making mount suid. Not too hard to do under the new infrastructure, just haven't done it yet... The previous code had the following notes, that belong in the version control comments: - * 3/21/1999 Charles P. Wright <cpwright@cpwright.com> - * searches through fstab when -a is passed - * will try mounting stuff with all fses when passed -t auto - * - * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab. - * - * 1999-10-07 Erik Andersen <andersen@codepoet.org>. - * Rewrite of a lot of code. Removed mtab usage (I plan on - * putting it back as a compile-time option some time), - * major adjustments to option parsing, and some serious - * dieting all around. - * - * 1999-11-06 mtab support is back - andersee - * - * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's - * mount to add loop support. - * - * 2000-04-30 Dave Cinege <dcinege@psychosis.com> - * Rewrote fstab while loop and lower mount section. Can now do - * single mounts from fstab. Can override fstab options for single - * mount. Common mount_one call for single mounts and 'all'. Fixed - * mtab updating and stale entries. Removed 'remount' default. - *
2005-08-11 02:05:54 +05:30
/*
* We want to be able to compile mount on old kernels in such a way
* that the binary will work well on more recent kernels.
* Thus, if necessary we teach nfsmount.c the structure of new fields
* that will come later.
*
* Moreover, the new kernel includes conflict with glibc includes
* so it is easiest to ignore the kernel altogether (at compile time).
*/
Major rewrite of mount, umount, losetup. Untangled lots of code, shrunk things down a bit, fixed a number of funky corner cases, added support for several new features (things like mount --move, mount --bind, lazy unounts, automatic detection of loop mounts, and so on). Probably broke several other things, but it's fixable. (Bang on it, tell me what doesn't work for you...) Note: you no longer need to say "-o loop". It does that for you when necessary. Still need to add "user mount" support, which involves making mount suid. Not too hard to do under the new infrastructure, just haven't done it yet... The previous code had the following notes, that belong in the version control comments: - * 3/21/1999 Charles P. Wright <cpwright@cpwright.com> - * searches through fstab when -a is passed - * will try mounting stuff with all fses when passed -t auto - * - * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab. - * - * 1999-10-07 Erik Andersen <andersen@codepoet.org>. - * Rewrite of a lot of code. Removed mtab usage (I plan on - * putting it back as a compile-time option some time), - * major adjustments to option parsing, and some serious - * dieting all around. - * - * 1999-11-06 mtab support is back - andersee - * - * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's - * mount to add loop support. - * - * 2000-04-30 Dave Cinege <dcinege@psychosis.com> - * Rewrote fstab while loop and lower mount section. Can now do - * single mounts from fstab. Can override fstab options for single - * mount. Common mount_one call for single mounts and 'all'. Fixed - * mtab updating and stale entries. Removed 'remount' default. - *
2005-08-11 02:05:54 +05:30
struct nfs2_fh {
char data[32];
};
struct nfs3_fh {
unsigned short size;
unsigned char data[64];
};
struct nfs_mount_data {
int version; /* 1 */
int fd; /* 1 */
struct nfs2_fh old_root; /* 1 */
int flags; /* 1 */
int rsize; /* 1 */
int wsize; /* 1 */
int timeo; /* 1 */
int retrans; /* 1 */
int acregmin; /* 1 */
int acregmax; /* 1 */
int acdirmin; /* 1 */
int acdirmax; /* 1 */
struct sockaddr_in addr; /* 1 */
char hostname[256]; /* 1 */
int namlen; /* 2 */
unsigned int bsize; /* 3 */
struct nfs3_fh root; /* 4 */
};
/* bits in the flags field */
enum {
NFS_MOUNT_SOFT = 0x0001, /* 1 */
NFS_MOUNT_INTR = 0x0002, /* 1 */
NFS_MOUNT_SECURE = 0x0004, /* 1 */
NFS_MOUNT_POSIX = 0x0008, /* 1 */
NFS_MOUNT_NOCTO = 0x0010, /* 1 */
NFS_MOUNT_NOAC = 0x0020, /* 1 */
NFS_MOUNT_TCP = 0x0040, /* 2 */
NFS_MOUNT_VER3 = 0x0080, /* 3 */
NFS_MOUNT_KERBEROS = 0x0100, /* 3 */
NFS_MOUNT_NONLM = 0x0200, /* 3 */
NFS_MOUNT_NOACL = 0x0800, /* 4 */
NFS_MOUNT_NORDIRPLUS = 0x4000
};
/*
* We need to translate between nfs status return values and
* the local errno values which may not be the same.
*
* Andreas Schwab <schwab@LS5.informatik.uni-dortmund.de>: change errno:
* "after #include <errno.h> the symbol errno is reserved for any use,
* it cannot even be used as a struct tag or field name".
*/
#ifndef EDQUOT
# define EDQUOT ENOSPC
#endif
/* Convert each NFSERR_BLAH into EBLAH */
static const uint8_t nfs_err_stat[] ALIGN1 = {
1, 2, 5, 6, 13, 17,
19, 20, 21, 22, 27, 28,
30, 63, 66, 69, 70, 71
};
#if ( \
EPERM | ENOENT | EIO | ENXIO | EACCES| EEXIST | \
ENODEV| ENOTDIR | EISDIR | EINVAL| EFBIG | ENOSPC | \
EROFS | ENAMETOOLONG| ENOTEMPTY| EDQUOT| ESTALE| EREMOTE) < 256
typedef uint8_t nfs_err_type;
#else
typedef uint16_t nfs_err_type;
#endif
static const nfs_err_type nfs_err_errnum[] ALIGN2 = {
EPERM , ENOENT , EIO , ENXIO , EACCES, EEXIST,
ENODEV, ENOTDIR , EISDIR , EINVAL, EFBIG , ENOSPC,
EROFS , ENAMETOOLONG, ENOTEMPTY, EDQUOT, ESTALE, EREMOTE
};
static char *nfs_strerror(int status)
{
int i;
for (i = 0; i < ARRAY_SIZE(nfs_err_stat); i++) {
if (nfs_err_stat[i] == status)
return strerror(nfs_err_errnum[i]);
}
return xasprintf("unknown nfs status return value: %d", status);
}
Major rewrite of mount, umount, losetup. Untangled lots of code, shrunk things down a bit, fixed a number of funky corner cases, added support for several new features (things like mount --move, mount --bind, lazy unounts, automatic detection of loop mounts, and so on). Probably broke several other things, but it's fixable. (Bang on it, tell me what doesn't work for you...) Note: you no longer need to say "-o loop". It does that for you when necessary. Still need to add "user mount" support, which involves making mount suid. Not too hard to do under the new infrastructure, just haven't done it yet... The previous code had the following notes, that belong in the version control comments: - * 3/21/1999 Charles P. Wright <cpwright@cpwright.com> - * searches through fstab when -a is passed - * will try mounting stuff with all fses when passed -t auto - * - * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab. - * - * 1999-10-07 Erik Andersen <andersen@codepoet.org>. - * Rewrite of a lot of code. Removed mtab usage (I plan on - * putting it back as a compile-time option some time), - * major adjustments to option parsing, and some serious - * dieting all around. - * - * 1999-11-06 mtab support is back - andersee - * - * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's - * mount to add loop support. - * - * 2000-04-30 Dave Cinege <dcinege@psychosis.com> - * Rewrote fstab while loop and lower mount section. Can now do - * single mounts from fstab. Can override fstab options for single - * mount. Common mount_one call for single mounts and 'all'. Fixed - * mtab updating and stale entries. Removed 'remount' default. - *
2005-08-11 02:05:54 +05:30
static bool_t xdr_fhandle(XDR *xdrs, fhandle objp)
{
return xdr_opaque(xdrs, objp, FHSIZE);
}
Major rewrite of mount, umount, losetup. Untangled lots of code, shrunk things down a bit, fixed a number of funky corner cases, added support for several new features (things like mount --move, mount --bind, lazy unounts, automatic detection of loop mounts, and so on). Probably broke several other things, but it's fixable. (Bang on it, tell me what doesn't work for you...) Note: you no longer need to say "-o loop". It does that for you when necessary. Still need to add "user mount" support, which involves making mount suid. Not too hard to do under the new infrastructure, just haven't done it yet... The previous code had the following notes, that belong in the version control comments: - * 3/21/1999 Charles P. Wright <cpwright@cpwright.com> - * searches through fstab when -a is passed - * will try mounting stuff with all fses when passed -t auto - * - * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab. - * - * 1999-10-07 Erik Andersen <andersen@codepoet.org>. - * Rewrite of a lot of code. Removed mtab usage (I plan on - * putting it back as a compile-time option some time), - * major adjustments to option parsing, and some serious - * dieting all around. - * - * 1999-11-06 mtab support is back - andersee - * - * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's - * mount to add loop support. - * - * 2000-04-30 Dave Cinege <dcinege@psychosis.com> - * Rewrote fstab while loop and lower mount section. Can now do - * single mounts from fstab. Can override fstab options for single - * mount. Common mount_one call for single mounts and 'all'. Fixed - * mtab updating and stale entries. Removed 'remount' default. - *
2005-08-11 02:05:54 +05:30
static bool_t xdr_fhstatus(XDR *xdrs, fhstatus *objp)
{
if (!xdr_u_int(xdrs, &objp->fhs_status))
return FALSE;
if (objp->fhs_status == 0)
return xdr_fhandle(xdrs, objp->fhstatus_u.fhs_fhandle);
return TRUE;
}
2006-03-20 23:37:50 +05:30
static bool_t xdr_dirpath(XDR *xdrs, dirpath *objp)
{
return xdr_string(xdrs, objp, MNTPATHLEN);
}
Major rewrite of mount, umount, losetup. Untangled lots of code, shrunk things down a bit, fixed a number of funky corner cases, added support for several new features (things like mount --move, mount --bind, lazy unounts, automatic detection of loop mounts, and so on). Probably broke several other things, but it's fixable. (Bang on it, tell me what doesn't work for you...) Note: you no longer need to say "-o loop". It does that for you when necessary. Still need to add "user mount" support, which involves making mount suid. Not too hard to do under the new infrastructure, just haven't done it yet... The previous code had the following notes, that belong in the version control comments: - * 3/21/1999 Charles P. Wright <cpwright@cpwright.com> - * searches through fstab when -a is passed - * will try mounting stuff with all fses when passed -t auto - * - * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab. - * - * 1999-10-07 Erik Andersen <andersen@codepoet.org>. - * Rewrite of a lot of code. Removed mtab usage (I plan on - * putting it back as a compile-time option some time), - * major adjustments to option parsing, and some serious - * dieting all around. - * - * 1999-11-06 mtab support is back - andersee - * - * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's - * mount to add loop support. - * - * 2000-04-30 Dave Cinege <dcinege@psychosis.com> - * Rewrote fstab while loop and lower mount section. Can now do - * single mounts from fstab. Can override fstab options for single - * mount. Common mount_one call for single mounts and 'all'. Fixed - * mtab updating and stale entries. Removed 'remount' default. - *
2005-08-11 02:05:54 +05:30
static bool_t xdr_fhandle3(XDR *xdrs, fhandle3 *objp)
{
return xdr_bytes(xdrs, (char **)&objp->fhandle3_val,
(unsigned int *) &objp->fhandle3_len,
FHSIZE3);
}
2006-03-20 23:37:50 +05:30
static bool_t xdr_mountres3_ok(XDR *xdrs, mountres3_ok *objp)
{
if (!xdr_fhandle3(xdrs, &objp->fhandle))
return FALSE;
return xdr_array(xdrs, &(objp->auth_flavours.auth_flavours_val),
&(objp->auth_flavours.auth_flavours_len),
~0,
sizeof(int),
(xdrproc_t) xdr_int);
}
static bool_t xdr_mountstat3(XDR *xdrs, mountstat3 *objp)
{
return xdr_enum(xdrs, (enum_t *) objp);
}
2006-01-25 05:38:53 +05:30
static bool_t xdr_mountres3(XDR *xdrs, mountres3 *objp)
{
if (!xdr_mountstat3(xdrs, &objp->fhs_status))
return FALSE;
if (objp->fhs_status == MNT_OK)
return xdr_mountres3_ok(xdrs, &objp->mountres3_u.mountinfo);
return TRUE;
}
2002-08-23 00:11:20 +05:30
#define MAX_NFSPROT ((nfs_mount_version >= 4) ? 3 : 2)
/*
* Unfortunately, the kernel prints annoying console messages
* in case of an unexpected nfs mount version (instead of
* just returning some error). Therefore we'll have to try
* and figure out what version the kernel expects.
*
* Variables:
* KERNEL_NFS_MOUNT_VERSION: kernel sources at compile time
* NFS_MOUNT_VERSION: these nfsmount sources at compile time
* nfs_mount_version: version this source and running kernel can handle
*/
static void
find_kernel_nfs_mount_version(void)
{
int kernel_version;
if (nfs_mount_version)
return;
nfs_mount_version = 4; /* default */
2002-08-23 00:11:20 +05:30
kernel_version = get_linux_version_code();
if (kernel_version) {
if (kernel_version < KERNEL_VERSION(2,2,18))
nfs_mount_version = 3;
/* else v4 since 2.3.99pre4 */
}
}
2007-10-14 10:25:59 +05:30
static void
get_mountport(struct pmap *pm_mnt,
struct sockaddr_in *server_addr,
long unsigned prog,
long unsigned version,
long unsigned proto,
long unsigned port)
{
struct pmaplist *pmap;
server_addr->sin_port = PMAPPORT;
2007-02-04 08:09:55 +05:30
/* glibc 2.4 (still) has pmap_getmaps(struct sockaddr_in *).
* I understand it like "IPv6 for this is not 100% ready" */
pmap = pmap_getmaps(server_addr);
if (version > MAX_NFSPROT)
version = MAX_NFSPROT;
if (!prog)
prog = MOUNTPROG;
pm_mnt->pm_prog = prog;
pm_mnt->pm_vers = version;
pm_mnt->pm_prot = proto;
pm_mnt->pm_port = port;
2006-09-17 21:58:10 +05:30
while (pmap) {
if (pmap->pml_map.pm_prog != prog)
goto next;
if (!version && pm_mnt->pm_vers > pmap->pml_map.pm_vers)
goto next;
if (version > 2 && pmap->pml_map.pm_vers != version)
goto next;
if (version && version <= 2 && pmap->pml_map.pm_vers > 2)
goto next;
if (pmap->pml_map.pm_vers > MAX_NFSPROT
|| (proto && pm_mnt->pm_prot && pmap->pml_map.pm_prot != proto)
|| (port && pmap->pml_map.pm_port != port)
) {
goto next;
}
memcpy(pm_mnt, &pmap->pml_map, sizeof(*pm_mnt));
next:
pmap = pmap->pml_next;
}
if (!pm_mnt->pm_vers)
pm_mnt->pm_vers = MOUNTVERS;
if (!pm_mnt->pm_port)
pm_mnt->pm_port = MOUNTPORT;
if (!pm_mnt->pm_prot)
pm_mnt->pm_prot = IPPROTO_TCP;
}
#if BB_MMU
static int daemonize(void)
{
int pid = fork();
if (pid < 0) /* error */
return -errno;
if (pid > 0) /* parent */
return 0;
/* child */
close(0);
xopen(bb_dev_null, O_RDWR);
xdup2(0, 1);
xdup2(0, 2);
setsid();
2006-10-04 02:30:43 +05:30
openlog(applet_name, LOG_PID, LOG_DAEMON);
logmode = LOGMODE_SYSLOG;
return 1;
}
#else
static inline int daemonize(void)
{
return -ENOSYS;
}
#endif
/* TODO */
2008-07-05 14:48:54 +05:30
static inline int we_saw_this_host_before(const char *hostname UNUSED_PARAM)
{
return 0;
}
/* RPC strerror analogs are terminally idiotic:
* *mandatory* prefix and \n at end.
* This hopefully helps. Usage:
* error_msg_rpc(clnt_*error*(" ")) */
static void error_msg_rpc(const char *msg)
{
int len;
while (msg[0] == ' ' || msg[0] == ':') msg++;
len = strlen(msg);
while (len && msg[len-1] == '\n') len--;
bb_error_msg("%.*s", len, msg);
}
2006-03-20 23:37:50 +05:30
/* NB: mp->xxx fields may be trashed on exit */
static NOINLINE int nfsmount(struct mntent *mp, unsigned long vfsflags, char *filteropts)
{
CLIENT *mclient;
char *hostname;
char *pathname;
char *mounthost;
/* prior to 2.6.23, kernel took NFS options in a form of this struct
* only. 2.6.23+ looks at data->version, and if it's not 1..6,
* then data pointer is interpreted as a string. */
struct nfs_mount_data data;
char *opt;
struct hostent *hp;
struct sockaddr_in server_addr;
struct sockaddr_in mount_server_addr;
int msock, fsock;
union {
struct fhstatus nfsv2;
struct mountres3 nfsv3;
} status;
int daemonized;
char *s;
int port;
int mountport;
int proto;
#if BB_MMU
smallint bg = 0;
#else
enum { bg = 0 };
#endif
int retry;
int mountprog;
int mountvers;
int nfsprog;
int nfsvers;
int retval;
/* these all are one-bit really. gcc 4.3.1 likes this combination: */
smallint tcp;
smallint soft;
int intr;
int posix;
int nocto;
int noac;
int nordirplus;
int nolock;
int noacl;
Major rewrite of mount, umount, losetup. Untangled lots of code, shrunk things down a bit, fixed a number of funky corner cases, added support for several new features (things like mount --move, mount --bind, lazy unounts, automatic detection of loop mounts, and so on). Probably broke several other things, but it's fixable. (Bang on it, tell me what doesn't work for you...) Note: you no longer need to say "-o loop". It does that for you when necessary. Still need to add "user mount" support, which involves making mount suid. Not too hard to do under the new infrastructure, just haven't done it yet... The previous code had the following notes, that belong in the version control comments: - * 3/21/1999 Charles P. Wright <cpwright@cpwright.com> - * searches through fstab when -a is passed - * will try mounting stuff with all fses when passed -t auto - * - * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab. - * - * 1999-10-07 Erik Andersen <andersen@codepoet.org>. - * Rewrite of a lot of code. Removed mtab usage (I plan on - * putting it back as a compile-time option some time), - * major adjustments to option parsing, and some serious - * dieting all around. - * - * 1999-11-06 mtab support is back - andersee - * - * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's - * mount to add loop support. - * - * 2000-04-30 Dave Cinege <dcinege@psychosis.com> - * Rewrote fstab while loop and lower mount section. Can now do - * single mounts from fstab. Can override fstab options for single - * mount. Common mount_one call for single mounts and 'all'. Fixed - * mtab updating and stale entries. Removed 'remount' default. - *
2005-08-11 02:05:54 +05:30
find_kernel_nfs_mount_version();
2006-03-20 23:37:50 +05:30
daemonized = 0;
mounthost = NULL;
retval = ETIMEDOUT;
msock = fsock = -1;
mclient = NULL;
2006-03-20 23:37:50 +05:30
/* NB: hostname, mounthost, filteropts must be free()d prior to return */
filteropts = xstrdup(filteropts); /* going to trash it later... */
hostname = xstrdup(mp->mnt_fsname);
/* mount_main() guarantees that ':' is there */
s = strchr(hostname, ':');
pathname = s + 1;
*s = '\0';
/* Ignore all but first hostname in replicated mounts
* until they can be fully supported. (mack@sgi.com) */
s = strchr(hostname, ',');
if (s) {
*s = '\0';
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg("warning: multiple hostnames not supported");
}
server_addr.sin_family = AF_INET;
if (!inet_aton(hostname, &server_addr.sin_addr)) {
hp = gethostbyname(hostname);
if (hp == NULL) {
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_herror_msg(hostname);
goto fail;
}
if (hp->h_length != (int)sizeof(struct in_addr)) {
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg_and_die("only IPv4 is supported");
}
memcpy(&server_addr.sin_addr, hp->h_addr_list[0], sizeof(struct in_addr));
1999-10-05 21:54:54 +05:30
}
memcpy(&mount_server_addr, &server_addr, sizeof(mount_server_addr));
2002-08-23 00:11:20 +05:30
/* add IP address to mtab options for use when unmounting */
2006-03-20 23:37:50 +05:30
if (!mp->mnt_opts) { /* TODO: actually mp->mnt_opts is never NULL */
mp->mnt_opts = xasprintf("addr=%s", inet_ntoa(server_addr.sin_addr));
} else {
char *tmp = xasprintf("%s%saddr=%s", mp->mnt_opts,
mp->mnt_opts[0] ? "," : "",
inet_ntoa(server_addr.sin_addr));
free(mp->mnt_opts);
mp->mnt_opts = tmp;
}
/* Set default options.
* rsize/wsize (and bsize, for ver >= 3) are left 0 in order to
* let the kernel decide.
* timeo is filled in after we know whether it'll be TCP or UDP. */
memset(&data, 0, sizeof(data));
data.retrans = 3;
data.acregmin = 3;
data.acregmax = 60;
data.acdirmin = 30;
data.acdirmax = 60;
data.namlen = NAME_MAX;
soft = 0;
intr = 0;
posix = 0;
nocto = 0;
nolock = 0;
noac = 0;
nordirplus = 0;
noacl = 0;
retry = 10000; /* 10000 minutes ~ 1 week */
tcp = 1; /* nfs-utils uses tcp per default */
mountprog = MOUNTPROG;
mountvers = 0;
port = 0;
mountport = 0;
nfsprog = 100003;
nfsvers = 0;
/* parse options */
if (filteropts) for (opt = strtok(filteropts, ","); opt; opt = strtok(NULL, ",")) {
char *opteq = strchr(opt, '=');
if (opteq) {
int val, idx;
static const char options[] ALIGN1 =
/* 0 */ "rsize\0"
/* 1 */ "wsize\0"
/* 2 */ "timeo\0"
/* 3 */ "retrans\0"
/* 4 */ "acregmin\0"
/* 5 */ "acregmax\0"
/* 6 */ "acdirmin\0"
/* 7 */ "acdirmax\0"
/* 8 */ "actimeo\0"
/* 9 */ "retry\0"
/* 10 */ "port\0"
/* 11 */ "mountport\0"
/* 12 */ "mounthost\0"
/* 13 */ "mountprog\0"
/* 14 */ "mountvers\0"
/* 15 */ "nfsprog\0"
/* 16 */ "nfsvers\0"
/* 17 */ "vers\0"
/* 18 */ "proto\0"
/* 19 */ "namlen\0"
/* 20 */ "addr\0";
*opteq++ = '\0';
idx = index_in_strings(options, opt);
switch (idx) {
case 12: // "mounthost"
mounthost = xstrndup(opteq,
strcspn(opteq, " \t\n\r,"));
continue;
case 18: // "proto"
libbb: introduce and use is_prefixed_with() function old new delta is_prefixed_with - 18 +18 complete_username 78 77 -1 man_main 737 735 -2 fsck_device 429 427 -2 unpack_ar_archive 80 76 -4 strip_unsafe_prefix 105 101 -4 singlemount 1054 1050 -4 rtc_adjtime_is_utc 90 86 -4 resolve_mount_spec 88 84 -4 parse_one_line 1029 1025 -4 parse_conf 1460 1456 -4 may_wakeup 83 79 -4 loadkmap_main 219 215 -4 get_irqs_from_stat 103 99 -4 get_header_cpio 913 909 -4 findfs_main 79 75 -4 fbsplash_main 1230 1226 -4 load_crontab 776 771 -5 expand_vars_to_list 1151 1146 -5 date_main 881 876 -5 skip_dev_pfx 30 24 -6 make_device 2199 2193 -6 complete_cmd_dir_file 773 767 -6 run_applet_and_exit 715 708 -7 uudecode_main 321 313 -8 pwdx_main 197 189 -8 execute 568 560 -8 i2cdetect_main 1186 1176 -10 procps_scan 1242 1230 -12 procps_read_smaps 1017 1005 -12 process_module 746 734 -12 patch_main 1903 1891 -12 nfsmount 3572 3560 -12 stack_machine 126 112 -14 process_timer_stats 449 435 -14 match_fstype 111 97 -14 do_ipaddr 1344 1330 -14 open_list_and_close 359 343 -16 get_header_tar 1795 1779 -16 prepend_new_eth_table 340 323 -17 fsck_main 1811 1794 -17 find_iface_state 56 38 -18 dnsd_main 1321 1303 -18 base_device 179 158 -21 find_keyword 104 82 -22 handle_incoming_and_exit 2785 2762 -23 parse_and_put_prompt 774 746 -28 modinfo 347 317 -30 find_action 204 171 -33 update_passwd 1470 1436 -34 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 0/49 up/down: 18/-540) Total: -522 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-03-12 22:18:34 +05:30
if (is_prefixed_with(opteq, "tcp"))
tcp = 1;
libbb: introduce and use is_prefixed_with() function old new delta is_prefixed_with - 18 +18 complete_username 78 77 -1 man_main 737 735 -2 fsck_device 429 427 -2 unpack_ar_archive 80 76 -4 strip_unsafe_prefix 105 101 -4 singlemount 1054 1050 -4 rtc_adjtime_is_utc 90 86 -4 resolve_mount_spec 88 84 -4 parse_one_line 1029 1025 -4 parse_conf 1460 1456 -4 may_wakeup 83 79 -4 loadkmap_main 219 215 -4 get_irqs_from_stat 103 99 -4 get_header_cpio 913 909 -4 findfs_main 79 75 -4 fbsplash_main 1230 1226 -4 load_crontab 776 771 -5 expand_vars_to_list 1151 1146 -5 date_main 881 876 -5 skip_dev_pfx 30 24 -6 make_device 2199 2193 -6 complete_cmd_dir_file 773 767 -6 run_applet_and_exit 715 708 -7 uudecode_main 321 313 -8 pwdx_main 197 189 -8 execute 568 560 -8 i2cdetect_main 1186 1176 -10 procps_scan 1242 1230 -12 procps_read_smaps 1017 1005 -12 process_module 746 734 -12 patch_main 1903 1891 -12 nfsmount 3572 3560 -12 stack_machine 126 112 -14 process_timer_stats 449 435 -14 match_fstype 111 97 -14 do_ipaddr 1344 1330 -14 open_list_and_close 359 343 -16 get_header_tar 1795 1779 -16 prepend_new_eth_table 340 323 -17 fsck_main 1811 1794 -17 find_iface_state 56 38 -18 dnsd_main 1321 1303 -18 base_device 179 158 -21 find_keyword 104 82 -22 handle_incoming_and_exit 2785 2762 -23 parse_and_put_prompt 774 746 -28 modinfo 347 317 -30 find_action 204 171 -33 update_passwd 1470 1436 -34 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 0/49 up/down: 18/-540) Total: -522 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-03-12 22:18:34 +05:30
else if (is_prefixed_with(opteq, "udp"))
tcp = 0;
else
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg("warning: unrecognized proto= option");
continue;
case 20: // "addr" - ignore
continue;
case -1: // unknown
if (vfsflags & MS_REMOUNT)
continue;
}
val = xatoi_positive(opteq);
switch (idx) {
case 0: // "rsize"
data.rsize = val;
continue;
case 1: // "wsize"
data.wsize = val;
continue;
case 2: // "timeo"
data.timeo = val;
continue;
case 3: // "retrans"
data.retrans = val;
continue;
case 4: // "acregmin"
data.acregmin = val;
continue;
case 5: // "acregmax"
data.acregmax = val;
continue;
case 6: // "acdirmin"
data.acdirmin = val;
continue;
case 7: // "acdirmax"
data.acdirmax = val;
continue;
case 8: // "actimeo"
data.acregmin = val;
data.acregmax = val;
data.acdirmin = val;
data.acdirmax = val;
continue;
case 9: // "retry"
retry = val;
continue;
case 10: // "port"
port = val;
continue;
case 11: // "mountport"
mountport = val;
continue;
case 13: // "mountprog"
mountprog = val;
continue;
case 14: // "mountvers"
mountvers = val;
continue;
case 15: // "nfsprog"
nfsprog = val;
continue;
case 16: // "nfsvers"
case 17: // "vers"
nfsvers = val;
continue;
case 19: // "namlen"
//if (nfs_mount_version >= 2)
data.namlen = val;
//else
// bb_error_msg("warning: option namlen is not supported\n");
continue;
default:
bb_error_msg("unknown nfs mount parameter: %s=%d", opt, val);
goto fail;
}
}
else { /* not of the form opt=val */
static const char options[] ALIGN1 =
"bg\0"
"fg\0"
"soft\0"
"hard\0"
"intr\0"
"posix\0"
"cto\0"
"ac\0"
"tcp\0"
"udp\0"
"lock\0"
"rdirplus\0"
"acl\0";
int val = 1;
libbb: introduce and use is_prefixed_with() function old new delta is_prefixed_with - 18 +18 complete_username 78 77 -1 man_main 737 735 -2 fsck_device 429 427 -2 unpack_ar_archive 80 76 -4 strip_unsafe_prefix 105 101 -4 singlemount 1054 1050 -4 rtc_adjtime_is_utc 90 86 -4 resolve_mount_spec 88 84 -4 parse_one_line 1029 1025 -4 parse_conf 1460 1456 -4 may_wakeup 83 79 -4 loadkmap_main 219 215 -4 get_irqs_from_stat 103 99 -4 get_header_cpio 913 909 -4 findfs_main 79 75 -4 fbsplash_main 1230 1226 -4 load_crontab 776 771 -5 expand_vars_to_list 1151 1146 -5 date_main 881 876 -5 skip_dev_pfx 30 24 -6 make_device 2199 2193 -6 complete_cmd_dir_file 773 767 -6 run_applet_and_exit 715 708 -7 uudecode_main 321 313 -8 pwdx_main 197 189 -8 execute 568 560 -8 i2cdetect_main 1186 1176 -10 procps_scan 1242 1230 -12 procps_read_smaps 1017 1005 -12 process_module 746 734 -12 patch_main 1903 1891 -12 nfsmount 3572 3560 -12 stack_machine 126 112 -14 process_timer_stats 449 435 -14 match_fstype 111 97 -14 do_ipaddr 1344 1330 -14 open_list_and_close 359 343 -16 get_header_tar 1795 1779 -16 prepend_new_eth_table 340 323 -17 fsck_main 1811 1794 -17 find_iface_state 56 38 -18 dnsd_main 1321 1303 -18 base_device 179 158 -21 find_keyword 104 82 -22 handle_incoming_and_exit 2785 2762 -23 parse_and_put_prompt 774 746 -28 modinfo 347 317 -30 find_action 204 171 -33 update_passwd 1470 1436 -34 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 0/49 up/down: 18/-540) Total: -522 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-03-12 22:18:34 +05:30
if (is_prefixed_with(opt, "no")) {
val = 0;
opt += 2;
}
switch (index_in_strings(options, opt)) {
case 0: // "bg"
#if BB_MMU
bg = val;
#endif
break;
case 1: // "fg"
#if BB_MMU
bg = !val;
#endif
break;
case 2: // "soft"
soft = val;
break;
case 3: // "hard"
soft = !val;
break;
case 4: // "intr"
intr = val;
break;
case 5: // "posix"
posix = val;
break;
case 6: // "cto"
nocto = !val;
break;
case 7: // "ac"
noac = !val;
break;
case 8: // "tcp"
tcp = val;
break;
case 9: // "udp"
tcp = !val;
break;
case 10: // "lock"
if (nfs_mount_version >= 3)
nolock = !val;
else
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg("warning: option nolock is not supported");
break;
case 11: //rdirplus
nordirplus = !val;
break;
case 12: // acl
noacl = !val;
break;
default:
bb_error_msg("unknown nfs mount option: %s%s", val ? "" : "no", opt);
goto fail;
}
}
}
proto = (tcp) ? IPPROTO_TCP : IPPROTO_UDP;
data.flags = (soft ? NFS_MOUNT_SOFT : 0)
| (intr ? NFS_MOUNT_INTR : 0)
| (posix ? NFS_MOUNT_POSIX : 0)
| (nocto ? NFS_MOUNT_NOCTO : 0)
| (noac ? NFS_MOUNT_NOAC : 0)
| (nordirplus ? NFS_MOUNT_NORDIRPLUS : 0)
| (noacl ? NFS_MOUNT_NOACL : 0);
if (nfs_mount_version >= 2)
data.flags |= (tcp ? NFS_MOUNT_TCP : 0);
if (nfs_mount_version >= 3)
data.flags |= (nolock ? NFS_MOUNT_NONLM : 0);
if (nfsvers > MAX_NFSPROT || mountvers > MAX_NFSPROT) {
bb_error_msg("NFSv%d not supported", nfsvers);
goto fail;
}
if (nfsvers && !mountvers)
mountvers = (nfsvers < 3) ? 1 : nfsvers;
if (nfsvers && nfsvers < mountvers) {
mountvers = nfsvers;
}
/* Adjust options if none specified */
if (!data.timeo)
data.timeo = tcp ? 70 : 7;
data.version = nfs_mount_version;
if (vfsflags & MS_REMOUNT)
goto do_mount;
/*
* If the previous mount operation on the same host was
* backgrounded, and the "bg" for this mount is also set,
* give up immediately, to avoid the initial timeout.
*/
if (bg && we_saw_this_host_before(hostname)) {
daemonized = daemonize();
if (daemonized <= 0) { /* parent or error */
retval = -daemonized;
goto ret;
}
}
/* Create mount daemon client */
/* See if the nfs host = mount host. */
if (mounthost) {
if (mounthost[0] >= '0' && mounthost[0] <= '9') {
mount_server_addr.sin_family = AF_INET;
mount_server_addr.sin_addr.s_addr = inet_addr(hostname);
} else {
hp = gethostbyname(mounthost);
if (hp == NULL) {
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_herror_msg(mounthost);
goto fail;
}
if (hp->h_length != (int)sizeof(struct in_addr)) {
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg_and_die("only IPv4 is supported");
}
mount_server_addr.sin_family = AF_INET;
memcpy(&mount_server_addr.sin_addr, hp->h_addr_list[0], sizeof(struct in_addr));
}
}
/*
* The following loop implements the mount retries. When the mount
* times out, and the "bg" option is set, we background ourself
* and continue trying.
*
* The case where the mount point is not present and the "bg"
* option is set, is treated as a timeout. This is done to
* support nested mounts.
*
* The "retry" count specified by the user is the number of
* minutes to retry before giving up.
*/
{
struct timeval total_timeout;
struct timeval retry_timeout;
struct pmap pm_mnt;
time_t t;
time_t prevt;
time_t timeout;
retry_timeout.tv_sec = 3;
retry_timeout.tv_usec = 0;
total_timeout.tv_sec = 20;
total_timeout.tv_usec = 0;
/* FIXME: use monotonic()? */
timeout = time(NULL) + 60 * retry;
prevt = 0;
t = 30;
retry:
/* Be careful not to use too many CPU cycles */
if (t - prevt < 30)
sleep(30);
get_mountport(&pm_mnt, &mount_server_addr,
mountprog,
mountvers,
proto,
mountport);
nfsvers = (pm_mnt.pm_vers < 2) ? 2 : pm_mnt.pm_vers;
/* contact the mount daemon via TCP */
mount_server_addr.sin_port = htons(pm_mnt.pm_port);
msock = RPC_ANYSOCK;
switch (pm_mnt.pm_prot) {
case IPPROTO_UDP:
mclient = clntudp_create(&mount_server_addr,
pm_mnt.pm_prog,
pm_mnt.pm_vers,
retry_timeout,
&msock);
if (mclient)
break;
mount_server_addr.sin_port = htons(pm_mnt.pm_port);
msock = RPC_ANYSOCK;
case IPPROTO_TCP:
mclient = clnttcp_create(&mount_server_addr,
pm_mnt.pm_prog,
pm_mnt.pm_vers,
&msock, 0, 0);
break;
default:
mclient = NULL;
}
if (!mclient) {
if (!daemonized && prevt == 0)
error_msg_rpc(clnt_spcreateerror(" "));
} else {
enum clnt_stat clnt_stat;
/* Try to mount hostname:pathname */
mclient->cl_auth = authunix_create_default();
/* Make pointers in xdr_mountres3 NULL so
* that xdr_array allocates memory for us
*/
memset(&status, 0, sizeof(status));
if (pm_mnt.pm_vers == 3)
clnt_stat = clnt_call(mclient, MOUNTPROC3_MNT,
(xdrproc_t) xdr_dirpath,
(caddr_t) &pathname,
(xdrproc_t) xdr_mountres3,
(caddr_t) &status,
total_timeout);
else
clnt_stat = clnt_call(mclient, MOUNTPROC_MNT,
(xdrproc_t) xdr_dirpath,
(caddr_t) &pathname,
(xdrproc_t) xdr_fhstatus,
(caddr_t) &status,
total_timeout);
if (clnt_stat == RPC_SUCCESS)
goto prepare_kernel_data; /* we're done */
if (errno != ECONNREFUSED) {
error_msg_rpc(clnt_sperror(mclient, " "));
goto fail; /* don't retry */
}
/* Connection refused */
if (!daemonized && prevt == 0) /* print just once */
error_msg_rpc(clnt_sperror(mclient, " "));
auth_destroy(mclient->cl_auth);
clnt_destroy(mclient);
mclient = NULL;
close(msock);
msock = -1;
}
/* Timeout. We are going to retry... maybe */
if (!bg)
goto fail;
if (!daemonized) {
daemonized = daemonize();
if (daemonized <= 0) { /* parent or error */
retval = -daemonized;
goto ret;
}
}
prevt = t;
t = time(NULL);
if (t >= timeout)
/* TODO error message */
goto fail;
goto retry;
}
prepare_kernel_data:
if (nfsvers == 2) {
if (status.nfsv2.fhs_status != 0) {
bb_error_msg("%s:%s failed, reason given by server: %s",
hostname, pathname,
nfs_strerror(status.nfsv2.fhs_status));
goto fail;
}
memcpy(data.root.data,
(char *) status.nfsv2.fhstatus_u.fhs_fhandle,
NFS_FHSIZE);
data.root.size = NFS_FHSIZE;
memcpy(data.old_root.data,
(char *) status.nfsv2.fhstatus_u.fhs_fhandle,
NFS_FHSIZE);
} else {
fhandle3 *my_fhandle;
if (status.nfsv3.fhs_status != 0) {
bb_error_msg("%s:%s failed, reason given by server: %s",
hostname, pathname,
nfs_strerror(status.nfsv3.fhs_status));
goto fail;
}
my_fhandle = &status.nfsv3.mountres3_u.mountinfo.fhandle;
memset(data.old_root.data, 0, NFS_FHSIZE);
memset(&data.root, 0, sizeof(data.root));
data.root.size = my_fhandle->fhandle3_len;
memcpy(data.root.data,
(char *) my_fhandle->fhandle3_val,
my_fhandle->fhandle3_len);
data.flags |= NFS_MOUNT_VER3;
}
/* Create nfs socket for kernel */
if (tcp) {
if (nfs_mount_version < 3) {
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg("NFS over TCP is not supported");
goto fail;
}
fsock = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
} else
fsock = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
if (fsock < 0) {
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_perror_msg("nfs socket");
goto fail;
}
if (bindresvport(fsock, 0) < 0) {
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_perror_msg("nfs bindresvport");
goto fail;
}
if (port == 0) {
server_addr.sin_port = PMAPPORT;
port = pmap_getport(&server_addr, nfsprog, nfsvers,
tcp ? IPPROTO_TCP : IPPROTO_UDP);
if (port == 0)
port = NFS_PORT;
}
server_addr.sin_port = htons(port);
/* Prepare data structure for kernel */
data.fd = fsock;
memcpy((char *) &data.addr, (char *) &server_addr, sizeof(data.addr));
strncpy(data.hostname, hostname, sizeof(data.hostname));
/* Clean up */
auth_destroy(mclient->cl_auth);
clnt_destroy(mclient);
close(msock);
msock = -1;
if (bg) {
/* We must wait until mount directory is available */
struct stat statbuf;
int delay = 1;
while (stat(mp->mnt_dir, &statbuf) == -1) {
if (!daemonized) {
daemonized = daemonize();
if (daemonized <= 0) { /* parent or error */
/* FIXME: parent doesn't close fsock - ??! */
retval = -daemonized;
goto ret;
}
}
sleep(delay); /* 1, 2, 4, 8, 16, 30, ... */
delay *= 2;
if (delay > 30)
delay = 30;
}
}
/* Perform actual mount */
do_mount:
retval = mount_it_now(mp, vfsflags, (char*)&data);
goto ret;
/* Abort */
fail:
if (msock >= 0) {
if (mclient) {
auth_destroy(mclient->cl_auth);
clnt_destroy(mclient);
}
close(msock);
}
if (fsock >= 0)
close(fsock);
ret:
free(hostname);
free(mounthost);
free(filteropts);
return retval;
}
#else // !ENABLE_FEATURE_MOUNT_NFS
/* Linux 2.6.23+ supports nfs mounts with options passed as a string.
* For older kernels, you must build busybox with ENABLE_FEATURE_MOUNT_NFS.
* (However, note that then you lose any chances that NFS over IPv6 would work).
*/
static int nfsmount(struct mntent *mp, unsigned long vfsflags, char *filteropts)
{
len_and_sockaddr *lsa;
char *opts;
char *end;
char *dotted;
int ret;
# if ENABLE_FEATURE_IPV6
end = strchr(mp->mnt_fsname, ']');
if (end && end[1] == ':')
end++;
else
# endif
/* mount_main() guarantees that ':' is there */
end = strchr(mp->mnt_fsname, ':');
*end = '\0';
lsa = xhost2sockaddr(mp->mnt_fsname, /*port:*/ 0);
*end = ':';
dotted = xmalloc_sockaddr2dotted_noport(&lsa->u.sa);
if (ENABLE_FEATURE_CLEAN_UP) free(lsa);
opts = xasprintf("%s%saddr=%s",
filteropts ? filteropts : "",
filteropts ? "," : "",
dotted
);
if (ENABLE_FEATURE_CLEAN_UP) free(dotted);
ret = mount_it_now(mp, vfsflags, opts);
if (ENABLE_FEATURE_CLEAN_UP) free(opts);
return ret;
}
#endif // !ENABLE_FEATURE_MOUNT_NFS
// Mount one directory. Handles CIFS, NFS, loopback, autobind, and filesystem
// type detection. Returns 0 for success, nonzero for failure.
// NB: mp->xxx fields may be trashed on exit
static int singlemount(struct mntent *mp, int ignore_busy)
{
int loopfd = -1;
int rc = -1;
unsigned long vfsflags;
char *loopFile = NULL, *filteropts = NULL;
llist_t *fl = NULL;
struct stat st;
errno = 0;
vfsflags = parse_mount_options(mp->mnt_opts, &filteropts);
// Treat fstype "auto" as unspecified
if (mp->mnt_type && strcmp(mp->mnt_type, "auto") == 0)
mp->mnt_type = NULL;
// Might this be a virtual filesystem?
if (ENABLE_FEATURE_MOUNT_HELPERS && strchr(mp->mnt_fsname, '#')) {
char *args[35];
char *s;
int n;
// fsname: "cmd#arg1#arg2..."
// WARNING: allows execution of arbitrary commands!
// Try "mount 'sh#-c#sh' bogus_dir".
// It is safe ONLY because non-root
// cannot use two-argument mount command
// and using one-argument "mount 'sh#-c#sh'" doesn't work:
// "mount: can't find sh#-c#sh in /etc/fstab"
// (if /etc/fstab has it, it's ok: root sets up /etc/fstab).
s = mp->mnt_fsname;
n = 0;
args[n++] = s;
while (*s && n < 35 - 2) {
if (*s++ == '#' && *s != '#') {
s[-1] = '\0';
args[n++] = s;
}
}
args[n++] = mp->mnt_dir;
args[n] = NULL;
rc = spawn_and_wait(args);
goto report_error;
}
// Might this be an CIFS filesystem?
if (ENABLE_FEATURE_MOUNT_CIFS
&& (!mp->mnt_type || strcmp(mp->mnt_type, "cifs") == 0)
&& (mp->mnt_fsname[0] == '/' || mp->mnt_fsname[0] == '\\')
&& mp->mnt_fsname[0] == mp->mnt_fsname[1]
) {
int len;
char c;
char *hostname, *share;
2007-02-04 08:09:55 +05:30
len_and_sockaddr *lsa;
// Parse mp->mnt_fsname of the form "//hostname/share[/dir1/dir2]"
hostname = mp->mnt_fsname + 2;
len = strcspn(hostname, "/\\");
share = hostname + len + 1;
if (len == 0 // 3rd char is a [back]slash (IOW: empty hostname)
|| share[-1] == '\0' // no [back]slash after hostname
|| share[0] == '\0' // empty share name
) {
goto report_error;
}
c = share[-1];
share[-1] = '\0';
len = strcspn(share, "/\\");
// "unc=\\hostname\share" option is mandatory
// after CIFS option parsing was rewritten in Linux 3.4.
// Must use backslashes.
// If /dir1/dir2 is present, also add "prefixpath=dir1/dir2"
{
char *unc = xasprintf(
share[len] != '\0' /* "/dir1/dir2" exists? */
? "unc=\\\\%s\\%.*s,prefixpath=%s"
: "unc=\\\\%s\\%.*s",
hostname,
len, share,
share + len + 1 /* "dir1/dir2" */
);
parse_mount_options(unc, &filteropts);
if (ENABLE_FEATURE_CLEAN_UP) free(unc);
}
lsa = host2sockaddr(hostname, 0);
share[-1] = c;
if (!lsa)
goto report_error;
// If there is no "ip=..." option yet
if (!is_prefixed_with(filteropts, ",ip="+1)
&& !strstr(filteropts, ",ip=")
) {
char *dotted, *ip;
// Insert "ip=..." option into options
dotted = xmalloc_sockaddr2dotted_noport(&lsa->u.sa);
if (ENABLE_FEATURE_CLEAN_UP) free(lsa);
ip = xasprintf("ip=%s", dotted);
if (ENABLE_FEATURE_CLEAN_UP) free(dotted);
// Note: IPv6 scoped addresses ("host%iface", see RFC 4007) should be
// handled by libc in getnameinfo() (inside xmalloc_sockaddr2dotted_noport()).
// Currently, glibc does not support that (has no NI_NUMERICSCOPE),
// musl apparently does. This results in "ip=numericIPv6%iface_name"
// (instead of _numeric_ iface_id) with glibc.
// This probably should be fixed in glibc, not here.
// The workaround is to manually specify correct "ip=ADDR%n" option.
parse_mount_options(ip, &filteropts);
if (ENABLE_FEATURE_CLEAN_UP) free(ip);
}
mp->mnt_type = (char*)"cifs";
rc = mount_it_now(mp, vfsflags, filteropts);
goto report_error;
}
// Might this be an NFS filesystem?
libbb: introduce and use is_prefixed_with() function old new delta is_prefixed_with - 18 +18 complete_username 78 77 -1 man_main 737 735 -2 fsck_device 429 427 -2 unpack_ar_archive 80 76 -4 strip_unsafe_prefix 105 101 -4 singlemount 1054 1050 -4 rtc_adjtime_is_utc 90 86 -4 resolve_mount_spec 88 84 -4 parse_one_line 1029 1025 -4 parse_conf 1460 1456 -4 may_wakeup 83 79 -4 loadkmap_main 219 215 -4 get_irqs_from_stat 103 99 -4 get_header_cpio 913 909 -4 findfs_main 79 75 -4 fbsplash_main 1230 1226 -4 load_crontab 776 771 -5 expand_vars_to_list 1151 1146 -5 date_main 881 876 -5 skip_dev_pfx 30 24 -6 make_device 2199 2193 -6 complete_cmd_dir_file 773 767 -6 run_applet_and_exit 715 708 -7 uudecode_main 321 313 -8 pwdx_main 197 189 -8 execute 568 560 -8 i2cdetect_main 1186 1176 -10 procps_scan 1242 1230 -12 procps_read_smaps 1017 1005 -12 process_module 746 734 -12 patch_main 1903 1891 -12 nfsmount 3572 3560 -12 stack_machine 126 112 -14 process_timer_stats 449 435 -14 match_fstype 111 97 -14 do_ipaddr 1344 1330 -14 open_list_and_close 359 343 -16 get_header_tar 1795 1779 -16 prepend_new_eth_table 340 323 -17 fsck_main 1811 1794 -17 find_iface_state 56 38 -18 dnsd_main 1321 1303 -18 base_device 179 158 -21 find_keyword 104 82 -22 handle_incoming_and_exit 2785 2762 -23 parse_and_put_prompt 774 746 -28 modinfo 347 317 -30 find_action 204 171 -33 update_passwd 1470 1436 -34 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 0/49 up/down: 18/-540) Total: -522 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-03-12 22:18:34 +05:30
if ((!mp->mnt_type || is_prefixed_with(mp->mnt_type, "nfs"))
&& strchr(mp->mnt_fsname, ':') != NULL
) {
if (!mp->mnt_type)
mp->mnt_type = (char*)"nfs";
rc = nfsmount(mp, vfsflags, filteropts);
goto report_error;
}
// Look at the file. (Not found isn't a failure for remount, or for
// a synthetic filesystem like proc or sysfs.)
// (We use stat, not lstat, in order to allow
// mount symlink_to_file_or_blkdev dir)
if (!stat(mp->mnt_fsname, &st)
&& !(vfsflags & (MS_REMOUNT | MS_BIND | MS_MOVE))
) {
// Do we need to allocate a loopback device for it?
if (ENABLE_FEATURE_MOUNT_LOOP && S_ISREG(st.st_mode)) {
loopFile = bb_simplify_path(mp->mnt_fsname);
mp->mnt_fsname = NULL; // will receive malloced loop dev name
// mount always creates AUTOCLEARed loopdevs, so that umounting
// drops them without any code in the userspace.
// This happens since circa linux-2.6.25:
// commit 96c5865559cee0f9cbc5173f3c949f6ce3525581
// Date: Wed Feb 6 01:36:27 2008 -0800
// Subject: Allow auto-destruction of loop devices
loopfd = set_loop(&mp->mnt_fsname,
loopFile,
0,
((vfsflags & MS_RDONLY) ? BB_LO_FLAGS_READ_ONLY : 0)
| BB_LO_FLAGS_AUTOCLEAR
);
if (loopfd < 0) {
if (errno == EPERM || errno == EACCES)
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg(bb_msg_perm_denied_are_you_root);
else
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_perror_msg("can't setup loop device");
2006-09-17 20:34:35 +05:30
return errno;
}
// Autodetect bind mounts
} else if (S_ISDIR(st.st_mode) && !mp->mnt_type)
vfsflags |= MS_BIND;
}
// If we know the fstype (or don't need to), jump straight
// to the actual mount.
if (mp->mnt_type || (vfsflags & (MS_REMOUNT | MS_BIND | MS_MOVE))) {
char *next;
for (;;) {
next = mp->mnt_type ? strchr(mp->mnt_type, ',') : NULL;
if (next)
*next = '\0';
rc = mount_it_now(mp, vfsflags, filteropts);
if (rc == 0 || !next)
break;
mp->mnt_type = next + 1;
}
} else {
// Loop through filesystem types until mount succeeds
// or we run out
// Initialize list of block backed filesystems.
// This has to be done here so that during "mount -a",
// mounts after /proc shows up can autodetect.
if (!fslist) {
fslist = get_block_backed_filesystems();
if (ENABLE_FEATURE_CLEAN_UP && fslist)
atexit(delete_block_backed_filesystems);
}
for (fl = fslist; fl; fl = fl->link) {
mp->mnt_type = fl->data;
2006-09-17 20:34:35 +05:30
rc = mount_it_now(mp, vfsflags, filteropts);
if (rc == 0)
break;
}
}
// If mount failed, clean up loop file (if any).
// (Newer kernels which support LO_FLAGS_AUTOCLEAR should not need this,
// merely "close(loopfd)" should do it?)
if (ENABLE_FEATURE_MOUNT_LOOP && rc && loopFile) {
del_loop(mp->mnt_fsname);
if (ENABLE_FEATURE_CLEAN_UP) {
free(loopFile);
/* No, "rc != 0" needs it: free(mp->mnt_fsname); */
}
}
2007-02-04 08:09:55 +05:30
report_error:
if (ENABLE_FEATURE_CLEAN_UP)
free(filteropts);
if (loopfd >= 0)
close(loopfd);
if (errno == EBUSY && ignore_busy)
return 0;
if (errno == ENOENT && (vfsflags & MOUNT_NOFAIL))
return 0;
if (rc != 0)
bb_perror_msg("mounting %s on %s failed", mp->mnt_fsname, mp->mnt_dir);
return rc;
}
// -O support
// -O interprets a list of filter options which select whether a mount
// point will be mounted: only mounts with options matching *all* filtering
// options will be selected.
// By default each -O filter option must be present in the list of mount
// options, but if it is prefixed by "no" then it must be absent.
// For example,
// -O a,nob,c matches -o a,c but fails to match -o a,b,c
// (and also fails to match -o a because -o c is absent).
//
// It is different from -t in that each option is matched exactly; a leading
// "no" at the beginning of one option does not negate the rest.
static int match_opt(const char *fs_opt_in, const char *O_opt)
{
if (!O_opt)
return 1;
while (*O_opt) {
const char *fs_opt = fs_opt_in;
int O_len;
int match;
// If option begins with "no" then treat as an inverted match:
// matching is a failure
match = 0;
if (O_opt[0] == 'n' && O_opt[1] == 'o') {
match = 1;
O_opt += 2;
}
// Isolate the current O option
O_len = strchrnul(O_opt, ',') - O_opt;
// Check for a match against existing options
while (1) {
if (strncmp(fs_opt, O_opt, O_len) == 0
&& (fs_opt[O_len] == '\0' || fs_opt[O_len] == ',')
) {
if (match)
return 0; // "no" prefix, but option found
match = 1; // current O option found, go check next one
break;
}
fs_opt = strchr(fs_opt, ',');
if (!fs_opt)
break;
fs_opt++;
}
if (match == 0)
return 0; // match wanted but not found
if (O_opt[O_len] == '\0') // end?
break;
// Step to the next O option
O_opt += O_len + 1;
}
// If we get here then everything matched
return 1;
}
// Parse options, if necessary parse fstab/mtab, and call singlemount for
// each directory to be mounted.
int mount_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
2008-07-05 14:48:54 +05:30
int mount_main(int argc UNUSED_PARAM, char **argv)
{
char *cmdopts = xzalloc(1);
char *fstype = NULL;
char *O_optmatch = NULL;
char *storage_path;
llist_t *lst_o = NULL;
const char *fstabname = "/etc/fstab";
FILE *fstab;
int i, j;
int rc = EXIT_SUCCESS;
unsigned long cmdopt_flags;
unsigned opt;
struct mntent mtpair[2], *mtcur = mtpair;
IF_NOT_DESKTOP(const int nonroot = 0;)
IF_DESKTOP(int nonroot = ) sanitize_env_if_suid();
INIT_G();
// Parse long options, like --bind and --move. Note that -o option
// and --option are synonymous. Yes, this means --remount,rw works.
for (i = j = 1; argv[i]; i++) {
if (argv[i][0] == '-' && argv[i][1] == '-')
append_mount_options(&cmdopts, argv[i] + 2);
else
argv[j++] = argv[i];
}
argv[j] = NULL;
// Parse remaining options
// Max 2 params; -o is a list, -v is a counter
getopt32: remove opt_complementary function old new delta vgetopt32 1318 1392 +74 runsvdir_main 703 713 +10 bb_make_directory 423 425 +2 collect_cpu 546 545 -1 opt_chars 3 - -3 opt_complementary 4 - -4 tftpd_main 567 562 -5 ntp_init 476 471 -5 zcip_main 1266 1256 -10 xxd_main 428 418 -10 whois_main 140 130 -10 who_main 463 453 -10 which_main 212 202 -10 wget_main 2535 2525 -10 watchdog_main 291 281 -10 watch_main 222 212 -10 vlock_main 399 389 -10 uuencode_main 332 322 -10 uudecode_main 316 306 -10 unlink_main 45 35 -10 udhcpd_main 1482 1472 -10 udhcpc_main 2762 2752 -10 tune2fs_main 290 280 -10 tunctl_main 366 356 -10 truncate_main 218 208 -10 tr_main 518 508 -10 time_main 1134 1124 -10 tftp_main 286 276 -10 telnetd_main 1873 1863 -10 tcpudpsvd_main 1785 1775 -10 taskset_main 521 511 -10 tar_main 1009 999 -10 tail_main 1644 1634 -10 syslogd_main 1967 1957 -10 switch_root_main 368 358 -10 svlogd_main 1454 1444 -10 sv 1296 1286 -10 stat_main 104 94 -10 start_stop_daemon_main 1028 1018 -10 split_main 542 532 -10 sort_main 796 786 -10 slattach_main 624 614 -10 shuf_main 504 494 -10 setsid_main 96 86 -10 setserial_main 1132 1122 -10 setfont_main 388 378 -10 setconsole_main 78 68 -10 sendmail_main 1209 1199 -10 sed_main 677 667 -10 script_main 1077 1067 -10 run_parts_main 325 315 -10 rtcwake_main 454 444 -10 rm_main 175 165 -10 reformime_main 119 109 -10 readlink_main 123 113 -10 rdate_main 246 236 -10 pwdx_main 189 179 -10 pstree_main 317 307 -10 pscan_main 663 653 -10 popmaildir_main 818 808 -10 pmap_main 80 70 -10 nc_main 1042 1032 -10 mv_main 558 548 -10 mountpoint_main 477 467 -10 mount_main 1264 1254 -10 modprobe_main 768 758 -10 modinfo_main 333 323 -10 mktemp_main 200 190 -10 mkswap_main 324 314 -10 mkfs_vfat_main 1489 1479 -10 microcom_main 715 705 -10 md5_sha1_sum_main 521 511 -10 man_main 867 857 -10 makedevs_main 1052 1042 -10 ls_main 563 553 -10 losetup_main 432 422 -10 loadfont_main 89 79 -10 ln_main 524 514 -10 link_main 75 65 -10 ipcalc_main 544 534 -10 iostat_main 2397 2387 -10 install_main 768 758 -10 id_main 480 470 -10 i2cset_main 1239 1229 -10 i2cget_main 380 370 -10 i2cdump_main 1482 1472 -10 i2cdetect_main 682 672 -10 hwclock_main 406 396 -10 httpd_main 741 731 -10 grep_main 837 827 -10 getty_main 1559 1549 -10 fuser_main 297 287 -10 ftpgetput_main 345 335 -10 ftpd_main 2232 2222 -10 fstrim_main 251 241 -10 fsfreeze_main 77 67 -10 fsck_minix_main 2921 2911 -10 flock_main 314 304 -10 flashcp_main 740 730 -10 flash_eraseall_main 833 823 -10 fdformat_main 532 522 -10 expand_main 680 670 -10 eject_main 335 325 -10 dumpleases_main 630 620 -10 du_main 314 304 -10 dos2unix_main 441 431 -10 diff_main 1350 1340 -10 df_main 1064 1054 -10 date_main 1095 1085 -10 cut_main 961 951 -10 cryptpw_main 228 218 -10 crontab_main 575 565 -10 crond_main 1149 1139 -10 cp_main 370 360 -10 common_traceroute_main 3834 3824 -10 common_ping_main 1767 1757 -10 comm_main 239 229 -10 cmp_main 655 645 -10 chrt_main 379 369 -10 chpst_main 704 694 -10 chpasswd_main 308 298 -10 chown_main 171 161 -10 chmod_main 158 148 -10 cat_main 428 418 -10 bzip2_main 120 110 -10 blkdiscard_main 264 254 -10 base64_main 221 211 -10 arping_main 1665 1655 -10 ar_main 556 546 -10 adjtimex_main 406 396 -10 adduser_main 882 872 -10 addgroup_main 411 401 -10 acpid_main 1198 1188 -10 optstring 11 - -11 opt_string 18 - -18 OPT_STR 25 - -25 ubi_tools_main 1288 1258 -30 ls_options 31 - -31 ------------------------------------------------------------------------------ (add/remove: 0/6 grow/shrink: 3/129 up/down: 86/-1383) Total: -1297 bytes text data bss dec hex filename 915428 485 6876 922789 e14a5 busybox_old 914629 485 6872 921986 e1182 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-08-09 01:25:02 +05:30
opt = getopt32(argv, "^"
OPTION_STR
"\0" "?2"IF_FEATURE_MOUNT_VERBOSE("vv"),
&lst_o, &fstype, &O_optmatch
IF_FEATURE_MOUNT_OTHERTAB(, &fstabname)
IF_FEATURE_MOUNT_VERBOSE(, &verbose)
);
while (lst_o) append_mount_options(&cmdopts, llist_pop(&lst_o)); // -o
if (opt & OPT_r) append_mount_options(&cmdopts, "ro"); // -r
if (opt & OPT_w) append_mount_options(&cmdopts, "rw"); // -w
argv += optind;
// If we have no arguments, show currently mounted filesystems
if (!argv[0]) {
if (!(opt & OPT_a)) {
FILE *mountTable = setmntent(bb_path_mtab_file, "r");
if (!mountTable)
bb_error_msg_and_die("no %s", bb_path_mtab_file);
while (getmntent_r(mountTable, &mtpair[0], getmntent_buf,
GETMNTENT_BUFSIZE))
{
// Don't show rootfs. FIXME: why??
// util-linux 2.12a happily shows rootfs...
//if (strcmp(mtpair->mnt_fsname, "rootfs") == 0) continue;
if (!fstype || strcmp(mtpair->mnt_type, fstype) == 0)
printf("%s on %s type %s (%s)\n", mtpair->mnt_fsname,
mtpair->mnt_dir, mtpair->mnt_type,
mtpair->mnt_opts);
}
if (ENABLE_FEATURE_CLEAN_UP)
endmntent(mountTable);
return EXIT_SUCCESS;
}
storage_path = NULL;
} else {
// When we have two arguments, the second is the directory and we can
// skip looking at fstab entirely. We can always abspath() the directory
// argument when we get it.
if (argv[1]) {
if (nonroot)
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg_and_die(bb_msg_you_must_be_root);
mtpair->mnt_fsname = argv[0];
mtpair->mnt_dir = argv[1];
mtpair->mnt_type = fstype;
mtpair->mnt_opts = cmdopts;
2008-12-10 17:09:18 +05:30
resolve_mount_spec(&mtpair->mnt_fsname);
rc = singlemount(mtpair, /*ignore_busy:*/ 0);
return rc;
}
storage_path = bb_simplify_path(argv[0]); // malloced
}
// Past this point, we are handling either "mount -a [opts]"
// or "mount [opts] single_param"
cmdopt_flags = parse_mount_options(cmdopts, NULL);
if (nonroot && (cmdopt_flags & ~MS_SILENT)) // Non-root users cannot specify flags
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg_and_die(bb_msg_you_must_be_root);
// If we have a shared subtree flag, don't worry about fstab or mtab.
if (ENABLE_FEATURE_MOUNT_FLAGS
&& (cmdopt_flags & (MS_SHARED | MS_PRIVATE | MS_SLAVE | MS_UNBINDABLE))
) {
// verbose_mount(source, target, type, flags, data)
rc = verbose_mount("", argv[0], "", cmdopt_flags, "");
if (rc)
bb_simple_perror_msg_and_die(argv[0]);
return rc;
}
2006-09-17 21:58:10 +05:30
// A malicious user could overmount /usr without this.
if (ENABLE_FEATURE_MOUNT_OTHERTAB && nonroot)
fstabname = "/etc/fstab";
// Open either fstab or mtab
if (cmdopt_flags & MS_REMOUNT) {
// WARNING. I am not sure this matches util-linux's
// behavior. It's possible util-linux does not
// take -o opts from mtab (takes only mount source).
fstabname = bb_path_mtab_file;
}
fstab = setmntent(fstabname, "r");
2006-09-17 20:30:58 +05:30
if (!fstab)
bb_perror_msg_and_die("can't read '%s'", fstabname);
// Loop through entries until we find what we're looking for
memset(mtpair, 0, sizeof(mtpair));
for (;;) {
struct mntent *mtother = (mtcur==mtpair ? mtpair+1 : mtpair);
// Get next fstab entry
if (!getmntent_r(fstab, mtcur, getmntent_buf
+ (mtcur==mtpair ? GETMNTENT_BUFSIZE/2 : 0),
GETMNTENT_BUFSIZE/2)
) { // End of fstab/mtab is reached
mtcur = mtother; // the thing we found last time
break;
}
// If we're trying to mount something specific and this isn't it,
// skip it. Note we must match the exact text in fstab (ala
// "proc") or a full path from root
if (argv[0]) {
// Is this what we're looking for?
if (strcmp(argv[0], mtcur->mnt_fsname) != 0
&& strcmp(storage_path, mtcur->mnt_fsname) != 0
&& strcmp(argv[0], mtcur->mnt_dir) != 0
&& strcmp(storage_path, mtcur->mnt_dir) != 0
) {
continue; // no
}
// Remember this entry. Something later may have
// overmounted it, and we want the _last_ match.
mtcur = mtother;
// If we're mounting all
} else {
struct mntent *mp;
// No, mount -a won't mount anything,
// even user mounts, for mere humans
if (nonroot)
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg_and_die(bb_msg_you_must_be_root);
// Does type match? (NULL matches always)
if (!fstype_matches(mtcur->mnt_type, fstype))
continue;
// Skip noauto and swap anyway
if ((parse_mount_options(mtcur->mnt_opts, NULL) & (MOUNT_NOAUTO | MOUNT_SWAP))
// swap is bogus "fstype", parse_mount_options can't check fstypes
|| strcasecmp(mtcur->mnt_type, "swap") == 0
) {
continue;
}
// Does (at least one) option match?
// (NULL matches always)
if (!match_opt(mtcur->mnt_opts, O_optmatch))
continue;
resolve_mount_spec(&mtcur->mnt_fsname);
2006-12-26 23:47:42 +05:30
// NFS mounts want this to be xrealloc-able
mtcur->mnt_opts = xstrdup(mtcur->mnt_opts);
2008-12-10 17:09:18 +05:30
// If nothing is mounted on this directory...
// (otherwise repeated "mount -a" mounts everything again)
mp = find_mount_point(mtcur->mnt_dir, /*subdir_too:*/ 0);
// We do not check fsname match of found mount point -
// "/" may have fsname of "/dev/root" while fstab
// says "/dev/something_else".
if (mp) {
if (verbose) {
bb_error_msg("according to %s, "
"%s is already mounted on %s",
bb_path_mtab_file,
mp->mnt_fsname, mp->mnt_dir);
}
} else {
// ...mount this thing
if (singlemount(mtcur, /*ignore_busy:*/ 1)) {
// Count number of failed mounts
rc++;
}
}
2006-12-26 23:47:42 +05:30
free(mtcur->mnt_opts);
}
}
// End of fstab/mtab is reached.
// Were we looking for something specific?
if (argv[0]) { // yes
unsigned long l;
// If we didn't find anything, complain
if (!mtcur->mnt_fsname)
bb_error_msg_and_die("can't find %s in %s",
argv[0], fstabname);
// What happens when we try to "mount swap_partition"?
// (fstab containts "swap_partition swap swap defaults 0 0")
// util-linux-ng 2.13.1 does this:
// stat("/sbin/mount.swap", 0x7fff62a3a350) = -1 ENOENT (No such file or directory)
// mount("swap_partition", "swap", "swap", MS_MGC_VAL, NULL) = -1 ENOENT (No such file or directory)
// lstat("swap", 0x7fff62a3a640) = -1 ENOENT (No such file or directory)
// write(2, "mount: mount point swap does not exist\n", 39) = 39
// exit_group(32) = ?
#if 0
// In case we want to simply skip swap partitions:
l = parse_mount_options(mtcur->mnt_opts, NULL);
if ((l & MOUNT_SWAP)
// swap is bogus "fstype", parse_mount_options can't check fstypes
|| strcasecmp(mtcur->mnt_type, "swap") == 0
) {
goto ret;
}
#endif
if (nonroot) {
// fstab must have "users" or "user"
l = parse_mount_options(mtcur->mnt_opts, NULL);
if (!(l & MOUNT_USERS))
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg_and_die(bb_msg_you_must_be_root);
}
//util-linux-2.12 does not do this check.
//// If nothing is mounted on this directory...
//// (otherwise repeated "mount FOO" mounts FOO again)
//mp = find_mount_point(mtcur->mnt_dir, /*subdir_too:*/ 0);
//if (mp) {
// bb_error_msg("according to %s, "
// "%s is already mounted on %s",
// bb_path_mtab_file,
// mp->mnt_fsname, mp->mnt_dir);
//} else {
// ...mount the last thing we found
mtcur->mnt_opts = xstrdup(mtcur->mnt_opts);
append_mount_options(&(mtcur->mnt_opts), cmdopts);
resolve_mount_spec(&mtpair->mnt_fsname);
rc = singlemount(mtcur, /*ignore_busy:*/ 0);
if (ENABLE_FEATURE_CLEAN_UP)
free(mtcur->mnt_opts);
//}
}
//ret:
if (ENABLE_FEATURE_CLEAN_UP)
endmntent(fstab);
if (ENABLE_FEATURE_CLEAN_UP) {
free(storage_path);
free(cmdopts);
}
//TODO: exitcode should be ORed mask of (from "man mount"):
// 0 success
// 1 incorrect invocation or permissions
// 2 system error (out of memory, cannot fork, no more loop devices)
// 4 internal mount bug or missing nfs support in mount
// 8 user interrupt
//16 problems writing or locking /etc/mtab
//32 mount failure
//64 some mount succeeded
return rc;
}