TODO_config_nommu documents what I managed to compile so far
(yay! msh works! cool). inetd, telnetd, httpd still do not compile. TODO
Also make fork(), daemon() produce warnings on compile stage
(in addition to erros on link stage).
Add comment explaining POSIX rules for cp - and why
these rules are dangerous. Provide conditionally compiled code
for both POSIX and safe behaviors, select safe for now.
Code shrunk by ~80 bytes.
name resolution into IP or IPv6 only, otherwise
we take address family returned by host2sockaddr()
in lsa->sa.sa_family. IOW: "ping ::1" with do IPv6 ping,
"ping 127.0.0.1" will do IPv4 ping.
ping6 is aliased to "ping -6".
executable if we asked to exec someting with argv[0] == known_applet"
Use it in init. Also respect PATH in init, remove explicit "/sbin" etc
from exec. Patch by Gabriel L. Somlo <somlo@cmu.edu>
(will close all fd's > 2 on daemonization now)
getty: fix "getty -" support, and also do not try to chown/chmod "-"
telnetd: fix "lost ctty" bug
Yet another attempt on saner function names:
bb_sanitize_server_stdio(0/1) -> bb_sanitize_stdio() + bb_daemonize();
Since this is also needed for other applets like telnetd,
introduce generic driver for such things.
It even supports inetd-wait ('linger') mode, when inetd
hands out listen socket to child and waits to it to die,
instead of handing out accepted socket and continuing
listening itself (nowait mode).
Code growth ~200 bytes.
NB: our inetd doesn't support wait mode yet (or mabe it is buggy).
Convert telnet to it. Now this works:
telnetd -b [::1]:1234 - bind to IPv6 non-standard port
telnet [::1]:1234 - connect to IPv6 non-standard port
telnet ::1 1234 - same
This does not require ANY ipv6-specific code in applets
(no struct sockaddr_in6. In fact, no sockaddr_in, too).
uidgid_get -> get_uidgid, add additional param
(numeric_ok). Make chown use it.
chown: fix "chown user: ...."
install: fix incorrect use of bb_xget[pw/gr]nam
Doesn't die horribly on binary files anymore.
In fact, they _100%_ work now. Control chars
are in reverse video, including DEL and that idiocy of VT-10x,
Meta-ESC [inventor of which should be prohibited from reproducing].
Regex search is fixed also. When you specify search ('/' key),
control chars turn into dots (unhighlighted),
and found occurrences highlighted instead. This is reversible.
Memory management fixed (was leaky as hell) and optimized.
Linewrapping fixed and thoroughly tested.
Max buffer size made configurable.
~ 600 bytes saved.
xstrdup'ing and memory consumption. Made linewrap saner.
regex matching code was awful - still buggy, but not as
leaky as before. Made buffer size configurable. Killed
several static and on-stack buffers. Hopefully eliminated
staircase effect on Ctrl-C (unable to reproduce).
* do not make backup copy by copying (just retain old file)
* correctly fall back to /etc/passwd if user is not in shadow
* fix bug with overlong passwd entries
* be permissive on some kinds of failures
* reduce stack usage
* code size: -500 bytes
(GNU extensions 'K' and 'L').
We correctly handle them when untarring now, but unfortunately
we still don't use them when tarring! That stupid 100 char limit
is still there!
The biggest problem is that we don't support 'pax' tar format.
Linux kernel tarballs are in this format... shame
* unpack: handle tar header fields which are not NUL terminated
* pack: handle 4+GB files correctly
* pack: refuse to store 101+ softlinks (was truncating link
target name)
* pack: mask mode with 07777
Bad:
wget http://127.0.0.1:81/fgdg/Makefile
Connecting to 127.0.0.1[127.0.0.1]:81
: HTTP/1.0 404 Not Foundror 404 Not Found
Good:
wget http://127.0.0.1:81/fgdg/Makefile
Connecting to 127.0.0.1[127.0.0.1]:81
get: server returned error: HTTP/1.0 404 Not Found
nslookup: fix my mistake
applets: make Bernhard Fischer <rep.nop@aon.at> happy :)
Use it where appropriate.
Stop scanning /etc/passwd *for every process*!!! (uid->username)
top: reduce memory usage - we won't save unneeded fields
from /proc info anymore. Downside: ~+250 bytes of code
It is impossible to formulate sane ABI based on
size of ulong because it can be 32-bit or 64-bit.
Basically it means that you cannot portably use
more that 32 option chars in one call anyway...
Make it explicit.
bb_xx_msg will ever try to send output to syslog.
Add "select CONFIG_FEATURE_SYSLOG" to relevant applets.
This allows to omit syslog code if we do not have
any syslog-capable applets in the build.
few new (unfinished) config options, which I intend to make hidden (but
enabled) when CONFIG_NITPICK is disabled. Getting the .config infrastructure
to do that is non-obvious, it seems...
were using "1" as one of the arguments anyway, and as for the rest a multiply
and a push isn't noticeably bigger than pushing two arguments on the stack.
things like xasprintf() into xfuncs.c, remove xprint_file_by_name() (it only
had one user), clean up lots of #includes... General cleanup pass. What I've
been doing for the last couple days.
And it conflicts! I've removed httpd.c from this checkin due to somebody else
touching that file. It builds for me. I have to catch a bus. (Now you know
why I'm looking forward to Mercurial.)
untangle them:
Rewrite u_signal_names() into get_signum() and get_signame(), plus trim the
signal list to that required by posix (they can specify the numbers for
the rest if they really need them). (This is preparatory cleanup for adding
a timeout applet like Roberto Foglietta wants.)
Export the itoa (added due to Denis Vlasenko, although it's not quite his
preferred implementation) from xfuncs.c so it's actually used, and remove
several other redundant implementations of itoa and utoa() in the tree.
trigger for symlinks, not for device nodes. This should fix "cp -a /dev ."
to work as expected (when run by root, anyway).
While I was there, cleanup headers and make an #ifdef go away...
the start of the path. (This should be under the same config option as
the standalone shell, but right now that's buried in the shell menu.)
Also add the ability to specify CONFIG_BUSYBOX_EXEC_PATH with /proc/self/exe
as an overrideable default.
moved the contents of libbb/bb_echo.c back into coreutils/echo.c,
which is a more reasonable place for them than libbb. this
forces anyone who wants echo and test to be builtin to ash to
also have them available as applets. their cost is very small,
and the number of people who wouldn't want them as applets is
also very small.
added warning about shell builtins vs. CONFIG_FEATURE_SH_STANDALONE_SHELL,
which conflicts with their use.
thanks to nathanael copa for debugging help.
some string size optimization in test.c may have been lost with
this commit, but this is a good new baseline.
This needs a second pass to:
+ add bb_daemon(unsigned char no_chdir, unsigned char no_close, const char*flag)
+ eventually globally export argc and argv, so we don't need to pass it to
bb_daemon().
another... This adds bb_xspawn() support, which does vfork/exec. (I don't
know why using a static instead of a local adds ~40 bytes, but using
the local doesn't work...)
handle packets out of sequence if some data goes through the buffer and
some doesn't, B) it works on systems that can't handle aligned access,
C) we just have one code path to worry about.
While we're at it, sizeof() and RESERVE_CONFIG_BUFFER() really don't combine
well, which is why md5sum has been reading and processing data 4 bytes at a
time. I suspect that the existence of CONFIG_MD5_SIZE_VS_SPEED to do loop
unrolling and such in the algorithm was an attempt to work around that bug.
truncated for length. SVN 14135 made sure that the truncated version would
always be null terminated. SVN 14144 broke this for no readily apparent
reason, and I have no idea what it was even trying to accomplish. Reverted.
messages, C) can show the current association (if any) when called
with only one argument. Update the documentation a lot too.
Remind me to add a test suite for this thing. I think I've figured out
how to handle root-only testsuites...
chunk of data when they get it and not block until they've buffered 4k.
The use case was cat /proc/psaux, but you can also reproduce this by
running non-busybox cat by itself and typing things at the command line.
Then run busybox cat. Notice how cat is _supposed_ to echo each line back
to us as we hit enter?
find_root_device.c. (We #include it in busybox.h but not libbb.h, it seems.
Someday, someone's going to have to clarify for me the difference between
those two...)
- new bb_getopt_ulflags features: check max and min args, convert first argv to options special for ar and tar applets
- use bb_default_error_retval for env applet
- more long opt compatibility, can set flag for long opt struct now
- more logic: check opt-depend requires and global requires, special for 'id' and 'start-stop-daemon' applets.
appended to an executable that's being run (yes, I'm doing this) you get
EPERM, but mounting readonly fixes it. Doing the fallback all the time
shouldn't hurt, and is one less test.
- change llist_add_to_end as proposed by vodz in http://busybox.net/lists/busybox/2005-September/016411.html
- remove unneeded includes, add short boilerplate and copyright to llist.c
- move COMM_LEN from find_pid_by_name to libbb.h and use it in procps_status_t
- add reverse_pidlist() to find_pid_by_name. Will be needed for pidof.
as far as I can tell, are no longer relevant. Modern busybox refuses to
build under libc5 (there's a specific test and #error for that), and
I'm not sure building against 2.1 kernel headers on Alpha was ever relevant.
I'm happy to put any of this back if anybody can point to a real need for it,
but if so we need to specifically document what environment is being
compensated for. (And we should quarrantine the build environment code
into one place, anyway. Maybe "quirks.h" for known compiler and
libc quirks?)
the result of the ioctl so callers can tell if we have a tty. (0 means
we have a tty, nonzero means the ioctl couldn't find size info and we
fake 80x24. Really we should fake 80x25, but oh well...)
things down a bit, fixed a number of funky corner cases, added support for
several new features (things like mount --move, mount --bind, lazy unounts,
automatic detection of loop mounts, and so on). Probably broke several
other things, but it's fixable. (Bang on it, tell me what doesn't work for
you...)
Note: you no longer need to say "-o loop". It does that for you when
necessary.
Still need to add "user mount" support, which involves making mount suid. Not
too hard to do under the new infrastructure, just haven't done it yet...
The previous code had the following notes, that belong in the version
control comments:
- * 3/21/1999 Charles P. Wright <cpwright@cpwright.com>
- * searches through fstab when -a is passed
- * will try mounting stuff with all fses when passed -t auto
- *
- * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab.
- *
- * 1999-10-07 Erik Andersen <andersen@codepoet.org>.
- * Rewrite of a lot of code. Removed mtab usage (I plan on
- * putting it back as a compile-time option some time),
- * major adjustments to option parsing, and some serious
- * dieting all around.
- *
- * 1999-11-06 mtab support is back - andersee
- *
- * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's
- * mount to add loop support.
- *
- * 2000-04-30 Dave Cinege <dcinege@psychosis.com>
- * Rewrote fstab while loop and lower mount section. Can now do
- * single mounts from fstab. Can override fstab options for single
- * mount. Common mount_one call for single mounts and 'all'. Fixed
- * mtab updating and stale entries. Removed 'remount' default.
- *
> Hi,
> this is a first attempt of size optimization for zcip taking into account all
> the hints given so far on the list.
> I've applied just the more obvious busyboxifications so maybe it could be
> optimized more.
BTW: I've ripped out a lot of debug code and changed c++ // comments to /* */
as both were rather confusing for a newbie like me. ;-)
Sorry to the author for that.
I know that this makes mantaining the code easier, but I'm simple minded....
This is a first attempt to improve the comments of getopt_ulflags.c.
Maybe under some aspects the text could be refined, but so
far it is already usable and should help people who "avoided getopt_ulflags as the pest" to understand how it works.
This patch was created with the help of
Vodz, the author of the code, who explained me patiently
how getopt_ulflags works
and with the help of
Paul Fox, who corrected my broken english.
So thanks and merits should go to them also.
Is the change on libbb/loop.c which you commited in 2005/1/3 effective
really?
The __GLIBC__ macro and __UCLIBC__ macro are defined in
feature.h in glibc source, so the change may not be effective.
If you want to check this with __GLIBC__, feature.h header is needed.
Some architectures(e.g. PPC series) need to include linux/posix_types.h
in stead of asm/posix_types.h, so the patch which is attached with
this mail include <linux/posix_types.h>.
Hi to all,
This patch contains just some fixes for some misleading
comments in my_getpwuid.c and my_getug.c.
The code is untouched so this patch will not
cause troubles.
Please apply.
Thanks in advance and Ciao,
Tito
Hi!
I've created a patch to busybox' build system to allow building it in
separate tree in a manner similar to kbuild from kernel version 2.6.
That is, one runs command like
'make O=/build/some/where/for/specific/target/and/options'
and everything is built in this exact directory, provided that it exists.
I understand that applyingc such invasive changes during 'release
candidates' stage of development is at best unwise. So, i'm currently
asking for comments about this patch, starting from whether such thing
is needed at all to whether it coded properly.
'make check' should work now, and one make creates Makefile in build
directory, so one can run 'make' in build directory after that.
One possible caveat is that if we build in some directory other than
source one, the source directory should be 'distclean'ed first.
egor
Scenario:
touch x -- creates plain file name `x'
mkdir x -- exits successefully
libbb/make_directory.c, bb_make_directory(), contains
the following code:
if (mkdir(path, 0777) < 0) {
/* If we failed for any other reason than the directory
* already exists, output a diagnostic and return -1.*/
if (errno != EEXIST) {
fail_msg = "create";
umask(mask);
break;
}
/* Since the directory exists, don't attempt to change
* permissions if it was the full target. Note that
* this is not an error conditon. */
if (!c) {
umask(mask);
return 0;
}
}
The assumption that EEXIST error is due to that the *directory*
already exists is wrong: any file type with that name will cause
this error to be returned. Proper way IMHO will be is to stat()
the path and check whenever this is really a directory. Below
(attached) is a patch to fix this issue.
Hi Erik,
Hi to all,
This is part five of the my_get*id story.
I've tweaked a bit this two functions to make them more flexible,
but this changes will not affect existing code.
Now they work so:
1) my_getpwuid( char *user, uid_t uid, int bufsize)
if bufsize is > 0 char *user cannot be set to NULL
on success username is written on static allocated buffer
on failure uid as string is written to buffer and NULL is returned
if bufsize is = 0 char *user can be set to NULL
on success username is returned
on failure NULL is returned
if bufsize is < 0 char *user can be set to NULL
on success username is returned
on failure an error message is printed and the program exits
2) 1) my_getgrgid( char *group, uid_t uid, int bufsize)
if bufsize is > 0 char *group cannot be set to NULL
on success groupname is written on static allocated buffer
on failure gid as string is written to buffer and NULL is returned
if bufsize is = 0 char *group can be set to NULL
on success groupname is returned
on failure NULL is returned
if bufsize is < 0 char *group can be set to nULL
on success groupname is returned
on failure an error message is printed and the program exits
This changes were needed mainly for my new id applet.
It is somewhat bigger then the previous but matches the behaviour of GNU id
and is capable to handle usernames of whatever length.
BTW: at a first look it seems to me that it will integrate well (with just a few changes)
with the pending patch in patches/id_groups_alias.patch.
The increase in size is balanced by the removal of my_getpwnamegid.c
from libbb as this was used only in previous id applet and by size optimizations
made possible in whoami.c and in passwd.c.
I know that we are in feature freeze but I think that i've tested it enough
(at least I hope so.......).
Hi,
I've spent the half night staring at the devilish my_getpwuid and my_getgrgid functions
trying to find out a way to avoid actual and future potential buffer overflow problems
without breaking existing code.
Finally I've found a not intrusive way to do this that surely doesn't break existing code
and fixes a couple of problems too.
The attached patch:
1) changes the behaviour of my_getpwuid and my_getgrgid to avoid potetntial buffer overflows
2) fixes all occurences of this function calls in tar.c , id.c , ls.c, whoami.c, logger.c, libbb.h.
3) The behaviour of tar, ls and logger is unchanged.
4) The behavior of ps with somewhat longer usernames messing up output is fixed.
5) The only bigger change was the increasing of size of the buffers in id.c to avoid
false negatives (unknown user: xxxxxx) with usernames longer than 8 chars.
The value i used ( 32 chars ) was taken from the tar header ( see gname and uname).
Maybe this buffers can be reduced a bit ( to 16 or whatever ), this is up to you.
6) The increase of size of the binary is not so dramatic:
size busybox
text data bss dec hex filename
239568 2300 36816 278684 4409c busybox
size busybox_fixed
text data bss dec hex filename
239616 2300 36816 278732 440cc busybox
7) The behaviour of whoami changed:
actually it prints out an username cut down to the size of the buffer.
This could be fixed by increasing the size of the buffer as in id.c or
avoid the use of my_getpwuid and use getpwuid directly instead.
Maybe this colud be also remain unchanged......
Please apply if you think it is ok to do so.
The diff applies on today's cvs tarball (2004-08-25).
Thanks in advance,
Ciao,
Tito
Unfortunatelly I've not followed the last two or three weeks commits (new
semester started and so now I rarely have time to fix my personal bridge)
but tonight I synched my tree and immediately noticed a rather nasty bug!
[Using libbb/interface.c:1.24]
# grep eth0 /proc/net/dev | xargs
eth0:311708397 237346 1670 0 1789 1670 0 0 22580308 120297 0 0 0 102 0 0
# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:20:AF:7C:EA:B7
inet addr:10.0.0.1 Bcast:10.0.0.127 Mask:255.255.255.128
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:5 Base address:0x320
All values `ifconfig' is showing are `zeroed' -- I quickly looked at the
last commits I missed and noticed that there were a commit relating to
ifconfig, libbb/interface.c:1.23->1.24 (PatchSet 4338).
I've reversed the patch and now everything is working again. I compared
the get_name's return values from the 1.23 and 1.24 and quickly noticed
that the new revision is leaving `p' right on the sep while the rev 1.23
was leaving it right on the starting of the values...
1-line, 1/3-minute patch attached :-)
with a quick conversion you will see that 132608 == 0x20600
so noticed that the elif will never be matched !
Apparently there was already a try to modify this in CVS which
was reverted (it was plain wrong).
I don't know when __kernel_old_dev_t is needed, but with a 2.6.7
or a 2.6.8 this is __kernel_dev_t wich is needed.
I corrected this with the following patch but maybe older 2.6
still need __kernel_old_dev_t ?
I think this should be corrected before 1.0.
Thanks
Aurel
Hi to all,
This patch is useful for:
1) remove an unused var from extern char *find_real_root_device_name(const char* name)
changing it to extern char *find_real_root_device_name(void).
2) fixes include/libbb.h, coreutils/df.c, util-linux/mount.c and util-linux/umount.c accordingly.
3) fixes a bug, really a false positive, in find_real_root_device_name() that happens if
in the /dev directory exists a link named root (/dev/root) that should be skipped but
is not. This affects applets like df that display wrong results
On Sat, Jun 19, 2004 at 10:57:37PM +0200, Bastian Blank wrote:
> The following patch changes klogd to use openlog/syslog themself
> instead of calling syslog_msg which always calls the triple
> openlog/syslog/closelog.
Updated patch: get rid of syslog_msg entirely. Request from Erik Andersen.
Bastian
The linux kernel doesnt allow hard links to directories, SUS says its
implementation specific.
cramfs gives empty directories and 0 length files the same node it
makies it difficult to distinguish from hard links.
This is a bulk spelling fix patch against busybox-1.00-pre10.
If anyone gets a corrupted copy (and cares), let me know and
I will make alternate arrangements.
Erik - please apply.
Authors - please check that I didn't corrupt any meaning.
Package importers - see if any of these changes should be
passed to the upstream authors.
I glossed over lots of sloppy capitalizations, missing apostrophes,
mixed American/British spellings, and German-style compound words.
What is "pretect redefined for test" in cmdedit.c?
Good luck on the 1.00 release!
- Larry
Hi.
Last changes (rev 1.12) to recursive_actions() by Christian Grigis
have problem.
Test for demonstrate:
$ mkdir aaa bbb ccc
$ su
# chown root bbb
# chmod 700 bbb
# exit
$ busybox chmod 777 -R .
./bbb: Permision denied
But "./ccc" mode not changed. Previous variant works fine,
errors skiped and continued recursion.
--w
vodz
Hello everyone,
Busybox's insmod fails to locate a module when that module is the only one
existing in the /lib/modules directory (with a unique name).
Example:
# find /lib/modules/ -type f
/lib/modules/kernel/drivers/char/bios.o
# insmod bios
insmod: bios.o: no module by that name found
# touch /lib/modules/dummy
# find /lib/modules/ -type f
/lib/modules/kernel/drivers/char/bios.o
/lib/modules/dummy
# insmod bios
Using /lib/modules/kernel/drivers/char/bios.o
As long as there is another file in the /lib/modules directory, insmod
finds it OK.
I tracked the problem down to 'check_module_name_match()' in insmod.c:
It returns TRUE when a match is found, and FALSE otherwise. In the case
where there is only one module in the /lib/modules directory (or more that
one module, but all with the same name), 'recursive_action()' will return
TRUE and we end up on line 4196 in 'insmod.c' which returns an error.
[The reason it works with more than one module with different
names is that in this case there will always be one not matching,
'recursive_action()' will return FALSE and we end up in line 4189.]
Now, from the implementation of 'recursive_action()' and from other
usages of it (tar.c, etc.), it seems to me that FALSE should be returned
to indicate that we want to stop the recursion, so TRUE and FALSE should
be inverted in 'check_module_name_match()'.
At the same time, 'recursive_action()' continues to recurse even after
the recursive call has returned FALSE; again in my understanding and
other usages of it, we can safely stop recursing at this point.
Here is my patch against 1.00-pre8:
I've noticed a bug in the "autowidth" feature more, and is probably in
others. The call to the function get_terminal_width_height() passes
in a file descriptor but that file descriptor is never used, instead
the ioctl() is called with 0. In more_main() the call to
get_terminal_width_height() passes 0 as the file descriptor instead of
fileno(cin). This isn't a problem when you more a file (e.g. "more
/etc/passwd") but when you pipe a file to it (e.g. "cat /etc/passwd |
more") the size of the terminal cannot be determined because file
descriptor 0 is not a terminal. The fix is simple, I've attached a
patch for more.c and get_terminal_width_height.c.
BAPper
The off_t type is not a consistent size; it depends on the kernel options
(something about large file support). Therefore, the format string for
printing an address is not always the same.
a directory into itself. It is harder to do this correctly
than it appears. Not trying at all seems a better compromise
for the time being, untill we can implement this correctly.
As Manuel points out, this is a flawed fix, and doesnt fix the
following:
mkdir -p cpa cpb cpc
cp -a cpa cpa/cpb/cpc
Attached what appears to be a more sane fix. Apply on top of previous.
Please confirm sanity.
I was adding -s/--symbolic-link support to busybox cp when I noticed a
bug with -r/-a. Test case:
mkdir -p test/out
cd test
busybox cp -a * out/
Will never return until we run out of open files or similar.
Coreutils cp on the other hand will error with "cannot copy a directory,
`out', into itself, `out'". Patch attached.
with 2.6.x asm/posix_types.h, which has done singularly evil thing
by yanking __kernel_dev_t and renaming it. The loop interface was
really poorly designed in the first place. The new 64 bit loop
interface looks to be somewhat less horrible, too bad it is only
present in 2.6.x kernels.
-Erik
out during the allocation process. When vodz changed it to be allocated on the
stack, he forgot to explicitly zero it, leaving its value filled with whatever
used to be sitting on the stack. It would garbage values, depending on the
garbage that happened to be sitting on the stack when the function was called.
The result was that applets using bb_getopt_ulflags() were showing
unpredictable behavior (such as segfaults), which naturally broke many things.
device ID iff the named file is a character or block special device. Otherwise
it is meaningless junk, in which case st_dev should be used. This was done
incorrectly, which could cause mount to display bogus mount info.
-Erik
cp does not truncate existing destinations. That is, after
running
echo foo > foo
echo fubar > fubar
cp foo fubar
the contents of fubar are
foo
r
instead of
foo
function as there is no gracefull way of handling failures.
Rename bb_getport to bb_lookup_port, allow a default port to be
specified so it always returns a correct value.
Modify ftpgetput/rdate/wget to use the new interface.
wget/rdate now use etc/services with a falback default value.
archive_xread can be replaced with bb_full_read, and archive_copy_file
with bb_copyfd*
bb_copyfd is split into two functions bb_copyfd_size and bb_copyfd_eof,
they share a common backend.
in order to fix the problems with round robin DNS reported
by Andrew Flegg:
http://busybox.net/lists/busybox/2003-October/009579.html
This removes the ipv6 specific xconnect dns lookups. I do
not see why that would need to be special cased for ipv6 as
was done, but that will just have to be tested.
So IPV6 people -- please test this change!
-Erik
In BusyBox v1.00-pre2,
commands like ls, df with -h option report a wrong file size for files larger than 4GBtye!!
For example,
when I execute 'ls -l', it reports
-rw-r--r-- 1 root root 5368709120 Aug 17 2003 large_stream.tp
when I execute 'ls -lh', I expect that
-rw-r--r-- 1 root root 5.0G Aug 17 2003 large_stream.tp
but it reports
-rw-r--r-- 1 root root 1.0G Aug 17 2003 large_stream.tp
I fixed this bug that...
Line 31 in libbb/human_readable.c and line 275 include/libbb.h
const char *make_human_readable_str(unsigned long size
=> const char *make_human_readable_str(unsigned long long size
It's OK!
I've reported this bug in April and it still
exists in 1.00-pre2. So I made patches for
both 0.60.x and 1.00-pre2. The patch is very
simple, just use strncmp instead of strcmp.
Please apply if it is OK.
Here's the procedure to test this problem:
Create a executable with very long name, say
'test_1234567890123456' and execute it. Try
using 'killall' or 'pidof' to find/kill this
program. Without this patch, you can't find
the program.
This moment have algoritmicaly problem, not overflow:
strcat(wrapped, wrapped) - may be looped.
Hand patch:
- else if (strstr(strcat(wrapped, wrapped), newmono))
+ else {
+ safe_strncpy(wrapped + lenwrap, wrapped, lenwrap + 1);
+ if (strstr(wrapped, newmono))
+}
--w
vodz
this patch fixes run_parts when it's called by ifupdown. 1) argv has to be a
NULL terminated char* array, not just a string. 2) run_parts now explicitly
sets the environment. this environment is populated from the
/etc/network/interfaces config file and is needed by the scripts in
/etc/network/if-pre-up.d/. when run-parts is called from the command line the
environment is taken from the current process.
Vladimir Oleynik then wrote:
You can simplify this if use:
+ bb_xasprintf(&buf[0], "/etc/network/if-%s.d", opt);
+ buf[1] = NULL;
+
+ run_parts(&buf, 2, environ);
+ free(buf[0]);
--w
vodz
Hi.
Last patch have new libbb function
vfork_rexec() for can use daemon() to uClinux system.
This patched daemons: syslog, klogd, inetd, crond.
This not tested! I havn`t this systems.
Also. Previous patch for feature request MD5 crypt password for
httpd don`t sended to this mailist on 07/15/03
(mailist have Pytom module problem?).
The previous patch included, and have testing.
--w
vodz
I've found a possible bug in libbb/interface.c, in function
if_readlist_proc(). This function calls get_name(), and passes
as an argument 'name', a buffer of 16 bytes (IFNAMSIZ). The
function get_name(), however, may use more than 16 bytes,
when it is searching for aliases. Even if you don't have an
alias interface, you can run into trouble if the interface
has received more than 99999999 bytes, in which case the
space between the interface name and the rx stats
disappears, as in the /proc/net/dev example below:
wan0.200:264573315 462080 ...
In this case get_name() correctly identifies the interface name
as "wan0.200", but to do that it uses 18 bytes of the 'name'
buffer, which could lead to an unpredictable error.
A simple solution would be to increase the size of the buffer:
Hello, I think the test for an unconfigured httpd is wrong in
the CVS (busybox-unstable-20030620.tar.bz2)
flg_deny_all is default 0
vodz then wrote:
Oops. You are right.
Also, this mistake haved from two place.
Last patch rewroted to my new get_ularg() function for overcompensate size
from this error found ;-)
Manuel,
I rewrite bb_getopt_ulflags() function for more universal usage.
My version support now:
- options with arguments (optional arg as GNU extension also)
- complementaly and/or incomplementaly and/or incongruously and/or list
options
- long_opt (all applets may have long option, add supporting is trivial)
This realisation full compatibile from your version.
Code size grow 480 bytes, but only coreutils/* over compensate this size
after using new function. Last patch reduced over 800 bytes and not full
applied to all. "mkdir" and "mv" applets have long_opt now for demonstrate
trivial addition support long_opt with usage new bb_getopt_ulflags().
Complementaly and/or incomplementaly and/or incongruously and/or list options
logic is not trivial, but new "cut" and "grep" applets using this logic
for examples with full demostrating. New "grep" applet reduced over 300
bytes.
Mark,
Also. I removed bug from "grep" applet.
$ echo a b | busybox grep -e a b
a b
a b
But right is printing one only.
--w
vodz
New complex patch for decrease size devel version. Requires previous patch.
Also removed small problems from dutmp and tar applets.
Also includes vodz' last_patch61_2:
Last patch correcting comment for #endif and more integrated
with libbb (very reduce size if used "cat" applet also).
Requires last_patch61 for modutils/config.in.
Hi, Erik.
my_getpw(uid/gid) and applets used it have problem:
if username for uid not found, applets can`t detect it
(but code pessent). Also "%8ld " format is bad:
spaces not required (applets have self format
or spec format (tar applet) and overflow for "id" applet...)
This problem also pressent in stable version.
Patch for unstable in attach.
--w
vodz
- Applied Joel Coltoff's xconnect patch:
On both my host system and with mipsel-linux for my embedded systems
the function getservbyname() gives the port number already in host order.
In fact, this is how it was used by rdate in version 0.60.3. The snapshot
I have of the development tree from July 12, 2002 takes the port number
and stuffs it into htons() before it uses it. This causes bugs in rdate,
telnet and wget. This patch fixes that.
#49: I found one memory overflow and memory leak in "ln" applet.
Last patch reduced also 54 bytes. ;)
#50: I found bug in loginutils/Makefile.in.
New patch have also new function to libbb and
aplied this to applets and other cosmetic changes.
xconnect helper routine which does:
-address and port resolving
-tries to connect to all resolved addresses until connected
-uses getaddrinfo, so works for IPv6 too
This patch also ports rdate, telnet, and wget to use the new
xconnect function. Thanks Bart!
IPV6 support to busybox. This patch does the following:
* Add IPv6 support to libbb
* Enable IPv6 interface address display
* Add IPv6 config option
* Adds ping6, an adaptation of the ping applet for IPv6
* Adds support routines for ping6:
- xgethostbyname2
- create_icmp6_socket
* Adds ifconfig support for IPv6
* Add support IPv6 to netstat
* Add IPv6 support to route
Thanks Bart!
When DEBUG is defined
1. need to include resolv.h (for _resinit())
2. remove _() call around string. It appears to be a remnant of i18n or some such notion
the busybox development tree. This eliminates the use of recursive make, and
once again allows us to run 'make' in a subdirectory with the expected result.
And things are now much faster too. Greatly improved IMHO...
-Erik
