``` .--. .--. .--. .-----.--.--.-----| |--| :-----.-----.--| | |__ --| | |__ --| <| | _ | _ | _ | RFC3164 :: syslogd for Linux |_____|___ |_____|__|__|__|_____|___ |_____| RFC5424 :: w/NetBSD syslogp() |_____| |_____| <23>Aug 24 05:14:15 192.0.2.1 myproc[8710]: Kilroy was here. <23>1 2019-11-04T00:50:15.001234+01:00 troglobit myproc 8710 - - Kilroy was here. ``` Packaging status [![BSD Badge][]][BSD License] [![GitHub Status][]][GitHub] [![Coverity Status][]][Coverity Scan] Table of Contents ----------------- * [Introduction](#introduction) * [Using -lsyslog](#using--lsyslog) * [Build & Install](#build--install) * [Building from GIT](#building-from-git) * [Origin & References](#origin--references) > **Tip:** the Gentoo project has a very nice article on their wiki > detailing how to use and set up sysklogd ➤ > Introduction ------------ This is the continuation of the original Debian/Ubuntu syslog daemon, updated with full [RFC3164][] and [RFC5424][] support from NetBSD and FreeBSD. The package includes the `libsyslog.{a,so}` library with a `syslog.h` header replacement, the `syslogd` daemon, and a command line tool called `logger`. `libsyslog` and `syslog/syslog.h`, derived directly from NetBSD, expose `syslogp()` and other new features available only in [RFC5424][]: - https://man.troglobit.com/man3/syslogp.3.html - https://man.troglobit.com/man8/syslogd.8.html - https://man.troglobit.com/man5/syslog.conf.5.html - https://netbsd.gw.com/cgi-bin/man-cgi?syslog+3+NetBSD-current The `syslogd` daemon is an enhanced version of the standard Berkeley utility program, updated with DNA from FreeBSD. It provides logging of messages received from the kernel, programs and facilities on the local host as well as messages from remote hosts. Although fully compatible with standard C-library implementations of the `syslog()` API (GLIBC, musl libc, uClibc), `libsyslog` must be used in your application to unlock the new [RFC5424][] `syslogp()` API. The included `logger` tool can be used from the command line, or script, to send RFC5424 formatted messages using `libsyslog` to `syslogd` for local or remote logging. Main differences from the original sysklogd package are: - The separate `klogd` daemon is no longer part of the sysklogd project, syslogd now natively supports logging kernel messages as well - *Major* command line changes to `syslogd`, for compatibilty with *BSD - Supports `include /etc/syslog.d/*.conf` directive, see example .conf - Built-in log-rotation support, with compression by default, useful for embedded systems. No need for cron and/or a separate log rotate daemon - Full [RFC3164][] and [RFC5424][] support from NetBSD and FreeBSD - Support for sending RFC3164 style remote syslog messages, including timestamp and hostname. Defaults to send w/o for compatibility - Support for sending RFC5424 style remote syslog messages - Support for sending messages to a custom port on a remote server - Support for listening to a custom port - Support for remote peer filtering, from FreeBSD - Support for disabling DNS reverse lookups for each remote log message - Support for FreeBSD Secure Mode, remote logging enabled by default(!) - Includes a `logger` tool with RFC5424 capabilities (`msgid` etc.) - Includes a syslog library and system header replacement for logging - FreeBSD socket receive buffer size patch - Avoid blocking `syslogd` if console is backed up - Touch PID file on `SIGHUP`, for integration with [Finit][] - GNU configure & build system to ease porting/cross-compiling - Support for configuring remote syslog timeout Using -lsyslog -------------- libsyslog is by default installed as a library with a header file: ```C #include ``` The output from the `pkg-config` tool holds no surprises: ```sh $ pkg-config --libs --static --cflags libsyslog -I/usr/local/include -L/usr/local/lib -lsyslog ``` The prefix path `/usr/local/` shown here is only the default. Use the `configure` script to select a different prefix when installing libsyslog. For GNU autotools based projects, instead of issuing the `pkg-config` command manually, use the following in `configure.ac`: ```sh # Check for required libraries PKG_CHECK_MODULES([syslog], [libsyslog >= 2.0]) ``` and for your "proggy" in `Makefile.am`: ```sh proggy_CFLAGS = $(syslog_CFLAGS) proggy_LDADD = $(syslog_LIBS) ``` The distribution comes with an [example][] program that utilizes the NetBSD API and links against libsyslog. Build & Install --------------- The GNU Configure & Build system use `/usr/local` as the default install prefix. In many cases this is useful, but this means the configuration files and cache files will also use that same prefix. Most users have come to expect those files in `/etc/` and `/var/run/` and configure has a few useful options that are recommended to use: ```sh ./configure --prefix=/usr --sysconfdir=/etc --runstatedir=/run make -j5 sudo make install-strip ``` You may want to remove the `--prefix=/usr` option. Most users prefer non-distro binaries in `/usr/local` or `/opt`. > **Note:** the `--runstatedir` option should point to a filesystem > that is cleaned at reboot. syslogd relies on this for > its `syslogd.cache` file, which keeps track of the last > read kernel log message from `/dev/kmsg`. Building from GIT ----------------- If you want to contribute, or just try out the latest but unreleased features, then you need to know a few things about the [GNU build system][buildsystem]: - `configure.ac` and a per-directory `Makefile.am` are key files - `configure` and `Makefile.in` are generated from `autogen.sh`, they are not stored in GIT but automatically generated for the release tarballs - `Makefile` is generated by `configure` script To build from GIT you first need to clone the repository and run the `autogen.sh` script. This requires `automake` and `autoconf` to be installed on your system. ```sh git clone https://github.com/troglobit/sysklogd.git cd sysklogd/ ./autogen.sh ./configure && make ``` GIT sources are a moving target and are not recommended for production systems, unless you know what you are doing! **Note:** some systems may have an older, or a vanilla, version of the GNU autoconf package that does not support `--runstatedir` (above). Users on such systems are recommended to use `--localstatedir`, the `$runstatedir` used by sysklogd is derived from that if missing. Origin & References ------------------- This is the continuation of the original sysklogd by Dr. G.W. Wettstein and [Martin Schulze][]. Currently maintained, and almost completely rewritten with the latest DNA strands from NetBSD and FreeBSD, by [Joachim Wiberg][]. Please file bug reports, or send pull requests for bug fixes and proposed extensions at [GitHub][Home]. The project was previously licensed under the GNU GPL, but since the removal of `klogd`, man pages, and resync with the BSDs the project is now [3-clause BSD][BSD License] licensed. [RFC3164]: https://tools.ietf.org/html/rfc3164 [RFC5424]: https://tools.ietf.org/html/rfc5424 [Martin Schulze]: http://www.infodrom.org/projects/sysklogd/ [Joachim Wiberg]: https://troglobit.com [Finit]: https://github.com/troglobit/finit [Home]: https://github.com/troglobit/sysklogd [example]: https://github.com/troglobit/sysklogd/tree/master/example [buildsystem]: https://airs.com/ian/configure/ [BSD License]: https://en.wikipedia.org/wiki/BSD_licenses [BSD Badge]: https://img.shields.io/badge/License-BSD%203--Clause-blue.svg [GitHub]: https://github.com/troglobit/sysklogd/actions/workflows/build.yml/ [GitHub Status]: https://github.com/troglobit/sysklogd/actions/workflows/build.yml/badge.svg [Coverity Scan]: https://scan.coverity.com/projects/19540 [Coverity Status]: https://scan.coverity.com/projects/19540/badge.svg