gramps/gramps2/doc/gramps-manual/C/Makefile.in

# Makefile.in generated by automake 1.8.3 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
# No modifications of this Makefile should be necessary.
#
# To use this template:
#     1) Define: figdir, docname, lang, omffile, and entities in
#        your Makefile.am file for each document directory,
#        although figdir, omffile, and entities may be empty
#     2) Make sure the Makefile in (1) also includes 
#	 "include $(top_srcdir)/doc/xmldocs.make" and
#	 "dist-hook: app-dist-hook".
#     3) Optionally define 'entities' to hold xml entities which
#        you would also like installed
#     4) Figures must go under $(figdir)/ and be in PNG format
#     5) You should only have one document per directory 
#     6) Note that the figure directory, $(figdir)/, should not have its
#        own Makefile since this Makefile installs those figures.
#
# example Makefile.am:
#   figdir = figures
#   docname = scrollkeeper-manual
#   lang = C
#   omffile=scrollkeeper-manual-C.omf
#   entities = fdl.xml
#   include $(top_srcdir)/help/xmldocs.make
#   dist-hook: app-dist-hook
#
# About this file:
#	This file was taken from scrollkeeper_example2, a package illustrating
#	how to install documentation and OMF files for use with ScrollKeeper 
#	0.3.x and 0.4.x.  For more information, see:
#		http://scrollkeeper.sourceforge.net/
#	Version: 0.1.2 (last updated: March 20, 2002)
#

# 
# No modifications of this Makefile should be necessary.
#
# This file contains the build instructions for installing OMF files.  It is
# generally called from the makefiles for particular formats of documentation.
#
# Note that you must configure your package with --localstatedir=/var/lib
# so that the scrollkeeper-update command below will update the database
# in the standard scrollkeeper directory.
#
# If it is impossible to configure with --localstatedir=/var/lib, then
# modify the definition of scrollkeeper_localstate_dir so that
# it points to the correct location. Note that you must still use 
# $(localstatedir) in this or when people build RPMs it will update
# the real database on their system instead of the one under RPM_BUILD_ROOT.
#
# Note: This make file is not incorporated into xmldocs.make because, in
#       general, there will be other documents install besides XML documents
#       and the makefiles for these formats should also include this file.
#
# About this file:
#	This file was taken from scrollkeeper_example2, a package illustrating
#	how to install documentation and OMF files for use with ScrollKeeper
#	0.3.x and 0.4.x.  For more information, see:
#		http://scrollkeeper.sourceforge.net/	
# 	Version: 0.1.2 (last updated: March 20, 2002)
#
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ../../..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(top_srcdir)/doc/omf.make $(top_srcdir)/doc/xmldocs.make
subdir = doc/gramps-manual/C
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(mkdir_p)
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BINSH = @BINSH@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
GNOMEHELP = @GNOMEHELP@
GPREFIX = @GPREFIX@
ICONV = @ICONV@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LANGUAGES = @LANGUAGES@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MOFILES = @MOFILES@
MSGCONV = @MSGCONV@
MSGFMT = @MSGFMT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
POFILES = @POFILES@
PYGTK_CFLAGS = @PYGTK_CFLAGS@
PYGTK_LIBS = @PYGTK_LIBS@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RELEASE = @RELEASE@
SCROLLKEEPER_BUILD_REQUIRED = @SCROLLKEEPER_BUILD_REQUIRED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SK_CONFIG = @SK_CONFIG@
STRIP = @STRIP@
VERSION = @VERSION@
VERSIONSTRING = @VERSIONSTRING@
ac_ct_STRIP = @ac_ct_STRIP@
am__leading_dot = @am__leading_dot@
bindir = @bindir@
build_alias = @build_alias@
datadir = @datadir@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
figdir = figures
docname = gramps-manual
lang = C
omffile = gramps-manual-C.omf
entities = legal.xml\
	getstart.xml\
	mainwin.xml\
	usage.xml\
	custom.xml\
	faq.xml\
	keybind.xml\
	filtref.xml\
	cmdline.xml 


# ************* Begin of section some packagers may need to modify  **************
# This variable (docdir) specifies where the documents should be installed.
# This default value should work for most packages.
docdir = $(datadir)/@PACKAGE@/gnome/help/@PACKAGE@/$(lang)

# **************  You should not have to edit below this line  *******************
xml_files = $(entities) $(docname).xml
omf_dir = $(top_srcdir)/omf-install
EXTRA_DIST = $(xml_files) $(omffile)
CLEANFILES = omf_timestamp *.out
omf_dest_dir = $(datadir)/omf/@PACKAGE@
scrollkeeper_localstate_dir = $(localstatedir)/scrollkeeper
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/doc/xmldocs.make $(top_srcdir)/doc/omf.make $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/gramps-manual/C/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/gramps-manual/C/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
uninstall-info-am:
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	$(mkdir_p) $(distdir)/../../../doc
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am: install-data-local
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook

install-exec-am:

install-info: install-info-am

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-info-am uninstall-local

.PHONY: all all-am check check-am clean clean-generic distclean \
	distclean-generic distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am \
	install-data-local install-exec install-exec-am install-info \
	install-info-am install-man install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
	pdf-am ps ps-am uninstall uninstall-am uninstall-info-am \
	uninstall-local


omf: omf_timestamp

omf_timestamp: $(omffile)
	-for file in $(omffile); do \
	  scrollkeeper-preinstall $(docdir)/$(docname).xml $(srcdir)/$$file $$file.out; \
	done
	touch omf_timestamp

install-data-hook-omf:
	$(mkinstalldirs) $(DESTDIR)$(omf_dest_dir)
	for file in $(omffile); do \
		$(INSTALL_DATA) $$file.out $(DESTDIR)$(omf_dest_dir)/$$file; \
	done
	-scrollkeeper-update -p $(scrollkeeper_localstate_dir) -o $(DESTDIR)$(omf_dest_dir)

uninstall-local-omf:
	-for file in $(srcdir)/*.omf; do \
		basefile=`basename $$file`; \
		rm -f $(DESTDIR)$(omf_dest_dir)/$$basefile; \
	done
	-rmdir $(DESTDIR)$(omf_dest_dir)
	-scrollkeeper-update -p $(scrollkeeper_localstate_dir) -o $(DESTDIR)/$(omf_dest_dir)

all: omf

$(docname).xml: $(entities)
	-ourdir=`pwd`;  \
	cd $(srcdir);   \
	cp $(entities) $$ourdir

.PHONY: distclean-hook
distclean: distclean-hook
distclean-hook:
	if [ $(top_srcdir) != $(top_builddir) ]; \
	then \
	  rm -f $(entities); \
	fi

app-dist-hook:
	if test "$(figdir)"; then \
	  $(mkinstalldirs) $(distdir)/$(figdir); \
	  for file in $(srcdir)/$(figdir)/*.png; do \
	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	    $(INSTALL_DATA) $$file $(distdir)/$(figdir)/$$basefile; \
	  done \
	fi

install-data-local: omf
	$(mkinstalldirs) $(DESTDIR)$(docdir)
	for file in $(xml_files); do \
	  cp $(srcdir)/$$file $(DESTDIR)$(docdir); \
	done
	if test "$(figdir)"; then \
	  $(mkinstalldirs) $(DESTDIR)$(docdir)/$(figdir); \
	  for file in $(srcdir)/$(figdir)/*.png; do \
	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	    $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/$(figdir)/$$basefile; \
	  done \
	fi

install-data-hook: install-data-hook-omf

uninstall-local: uninstall-local-doc uninstall-local-omf

uninstall-local-doc:
	-if test "$(figdir)"; then \
	  for file in $(srcdir)/$(figdir)/*.png; do \
	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	    rm -f $(DESTDIR)/$(docdir)/$(figdir)/$$basefile; \
	  done; \
	  rmdir $(DESTDIR)$(docdir)/$(figdir); \
	fi
	-for file in $(xml_files); do \
	  rm -f $(DESTDIR)$(docdir)/$$file; \
	done
	-rmdir $(DESTDIR)$(docdir)
dist-hook: app-dist-hook
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: