busybox/Makefile

1336 lines
42 KiB
Makefile
Raw Normal View History

2006-10-05 15:47:08 +05:30
VERSION = 1
PATCHLEVEL = 31
SUBLEVEL = 0
EXTRAVERSION = .git
2006-10-10 01:17:38 +05:30
NAME = Unnamed
2006-10-05 15:47:08 +05:30
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
# More info can be located in ./README
# Comments in this file are targeted only to the developer, do not
# expect to learn how to build the kernel reading this file.
# Do not print "Entering directory ..."
MAKEFLAGS += --no-print-directory
# We are using a recursive build, so we need to do a little thinking
# to get the ordering right.
1999-10-21 03:38:37 +05:30
#
2006-10-05 15:47:08 +05:30
# Most importantly: sub-Makefiles should only ever modify files in
# their own directory. If in some directory we have a dependency on
# a file in another dir (which doesn't happen often, but it's often
# unavoidable when linking the built-in.o targets which finally
# turn into busybox), we will call a sub make in that other dir, and
# after that we are sure that everything which is in that other dir
# is now up to date.
1999-10-21 03:38:37 +05:30
#
2006-10-05 15:47:08 +05:30
# The only cases where we need to modify files which have global
# effects are thus separated out and done before the recursive
# descending is started. They are now explicitly listed as the
# prepare rule.
1999-10-21 03:38:37 +05:30
2006-10-05 15:47:08 +05:30
# To put more focus on warnings, be less verbose as default
# Use 'make V=1' to see the full commands
2006-10-05 15:47:08 +05:30
ifdef V
ifeq ("$(origin V)", "command line")
KBUILD_VERBOSE = $(V)
endif
endif
ifndef KBUILD_VERBOSE
KBUILD_VERBOSE = 0
endif
2006-10-05 15:47:08 +05:30
# Call sparse as part of compilation of C files
# Use 'make C=1' to enable sparse checking
2006-10-05 15:47:08 +05:30
ifdef C
ifeq ("$(origin C)", "command line")
KBUILD_CHECKSRC = $(C)
endif
endif
ifndef KBUILD_CHECKSRC
KBUILD_CHECKSRC = 0
endif
2006-10-05 15:47:08 +05:30
# Use make M=dir to specify directory of external module to build
# Old syntax make ... SUBDIRS=$PWD is still supported
# Setting the environment variable KBUILD_EXTMOD take precedence
ifdef SUBDIRS
KBUILD_EXTMOD ?= $(SUBDIRS)
endif
2006-10-05 15:47:08 +05:30
ifdef M
ifeq ("$(origin M)", "command line")
KBUILD_EXTMOD := $(M)
endif
endif
2006-10-05 15:47:08 +05:30
# kbuild supports saving output files in a separate directory.
# To locate output files in a separate directory two syntaxes are supported.
# In both cases the working directory must be the root of the kernel src.
# 1) O=
# Use "make O=dir/to/store/output/files/"
#
2006-10-05 15:47:08 +05:30
# 2) Set KBUILD_OUTPUT
# Set the environment variable KBUILD_OUTPUT to point to the directory
# where the output files shall be placed.
# export KBUILD_OUTPUT=dir/to/store/output/files/
# make
#
# The O= assignment takes precedence over the KBUILD_OUTPUT environment
# variable.
2006-10-05 15:47:08 +05:30
# KBUILD_SRC is set on invocation of make in OBJ directory
# KBUILD_SRC is not intended to be used by the regular user (for now)
ifeq ($(KBUILD_SRC),)
2006-10-05 15:47:08 +05:30
# OK, Make called in directory where kernel src resides
# Do we want to locate output files in a separate directory?
ifdef O
ifeq ("$(origin O)", "command line")
2006-10-05 15:47:08 +05:30
KBUILD_OUTPUT := $(O)
endif
2006-10-05 15:47:08 +05:30
endif
# That's our default target when none is given on the command line
PHONY := _all
_all:
ifneq ($(KBUILD_OUTPUT),)
# Invoke a second make in the output directory, passing relevant variables
# check that the output directory actually exists
saved-output := $(KBUILD_OUTPUT)
KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
$(if $(KBUILD_OUTPUT),, \
$(error output directory "$(saved-output)" does not exist))
PHONY += $(MAKECMDGOALS)
$(filter-out _all,$(MAKECMDGOALS)) _all:
$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
KBUILD_SRC=$(CURDIR) \
KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@
# Leave processing to above invocation of make
skip-makefile := 1
endif # ifneq ($(KBUILD_OUTPUT),)
endif # ifeq ($(KBUILD_SRC),)
# We process the rest of the Makefile if this is the final invocation of make
ifeq ($(skip-makefile),)
# If building an external module we do not care about the all: rule
# but instead _all depend on modules
PHONY += all
ifeq ($(KBUILD_EXTMOD),)
_all: all
else
2006-10-05 15:47:08 +05:30
_all: modules
endif
2006-10-05 15:47:08 +05:30
srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
TOPDIR := $(srctree)
# FIXME - TOPDIR is obsolete, use srctree/objtree
objtree := $(CURDIR)
src := $(srctree)
obj := $(objtree)
VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
export srctree objtree VPATH TOPDIR
# Cross compiling and selecting different set of gcc/bin-utils
# ---------------------------------------------------------------------------
#
# When performing cross compilation for other architectures ARCH shall be set
# to the target architecture. (See arch/* for the possibilities).
# ARCH can be set during invocation of make:
# make ARCH=ia64
# Another way is to have ARCH set in the environment.
# The default ARCH is the host where make is executed.
# CROSS_COMPILE specify the prefix used for all executables used
# during compilation. Only gcc and related bin-utils executables
# are prefixed with $(CROSS_COMPILE).
# CROSS_COMPILE can be set on the command line
# make CROSS_COMPILE=ia64-linux-
# Alternatively CROSS_COMPILE can be set in the environment.
# Default value for CROSS_COMPILE is not to prefix executables
# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
2008-06-03 03:54:34 +05:30
CROSS_COMPILE ?=
2008-06-02 10:21:29 +05:30
# bbox: we may have CONFIG_CROSS_COMPILER_PREFIX in .config,
# and it has not been included yet... thus using an awkward syntax.
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := $(shell grep ^CONFIG_CROSS_COMPILER_PREFIX .config 2>/dev/null)
CROSS_COMPILE := $(subst CONFIG_CROSS_COMPILER_PREFIX=,,$(CROSS_COMPILE))
CROSS_COMPILE := $(subst ",,$(CROSS_COMPILE))
2009-01-28 00:24:41 +05:30
#")
2008-06-02 10:21:29 +05:30
endif
# SUBARCH tells the usermode build what the underlying arch is. That is set
# first, and if a usermode build is happening, the "ARCH=um" on the command
# line overrides the setting of ARCH below. If a native build is happening,
# then ARCH is assigned, getting whatever value it gets normally, and
# SUBARCH is subsequently ignored.
ifneq ($(CROSS_COMPILE),)
SUBARCH := $(shell echo $(CROSS_COMPILE) | cut -d- -f1 | sed 's:^.*/::g')
2008-06-02 10:21:29 +05:30
else
SUBARCH := $(shell uname -m)
endif
SUBARCH := $(shell echo $(SUBARCH) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ \
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ )
2008-06-03 03:54:34 +05:30
ARCH ?= $(SUBARCH)
2006-10-05 15:47:08 +05:30
# Architecture as present in compile.h
UTS_MACHINE := $(ARCH)
# SHELL used by kbuild
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi ; fi)
# Decide whether to build built-in, modular, or both.
# Normally, just do built-in.
KBUILD_MODULES :=
KBUILD_BUILTIN := 1
# If we have only "make modules", don't compile built-in objects.
# When we're building modules with modversions, we need to consider
# the built-in objects during the descend as well, in order to
# make sure the checksums are uptodate before we record them.
ifeq ($(MAKECMDGOALS),modules)
KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
endif
2006-10-05 15:47:08 +05:30
# If we have "make <whatever> modules", compile modules
# in addition to whatever we do anyway.
# Just "make" or "make all" shall build modules as well
ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
KBUILD_MODULES := 1
endif
ifeq ($(MAKECMDGOALS),)
KBUILD_MODULES := 1
endif
2006-10-05 15:47:08 +05:30
export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
# Beautify output
# ---------------------------------------------------------------------------
#
# Normally, we echo the whole command before executing it. By making
# that echo $($(quiet)$(cmd)), we now have the possibility to set
# $(quiet) to choose other forms of output instead, e.g.
#
# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
#
# If $(quiet) is empty, the whole command will be printed.
# If it is set to "quiet_", only the short version will be printed.
2006-10-05 15:47:08 +05:30
# If it is set to "silent_", nothing wil be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
# A simple variant is to prefix commands with $(Q) - that's useful
# for commands that shall be hidden in non-verbose mode.
#
# $(Q)ln $@ :<
#
# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
# If KBUILD_VERBOSE equals 1 then the above command is displayed.
ifeq ($(KBUILD_VERBOSE),1)
quiet =
Q =
else
quiet=quiet_
Q = @
endif
2006-10-05 15:47:08 +05:30
# If the user is running make -s (silent mode), suppress echoing of
# commands
ifneq ($(findstring s,$(MAKEFLAGS)),)
quiet=silent_
endif
2006-10-05 15:47:08 +05:30
export quiet Q KBUILD_VERBOSE
# Look for make include files relative to root of kernel src
MAKEFLAGS += --include-dir=$(srctree)
HOSTCC = gcc
HOSTCXX = g++
HOSTCFLAGS :=
HOSTCXXFLAGS :=
2006-10-05 15:47:08 +05:30
# We need some generic definitions
include $(srctree)/scripts/Kbuild.include
2006-10-05 15:47:08 +05:30
HOSTCFLAGS += $(call hostcc-option,-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer,)
HOSTCXXFLAGS += -O2
2006-10-05 15:47:08 +05:30
# For maximum performance (+ possibly random breakage, uncomment
# the following)
MAKEFLAGS += -rR
# Make variables (CC, etc...)
AS = $(CROSS_COMPILE)as
CC = $(CROSS_COMPILE)gcc
LD = $(CC) -nostdlib
2006-10-05 15:47:08 +05:30
CPP = $(CC) -E
AR = $(CROSS_COMPILE)ar
NM = $(CROSS_COMPILE)nm
STRIP = $(CROSS_COMPILE)strip
OBJCOPY = $(CROSS_COMPILE)objcopy
OBJDUMP = $(CROSS_COMPILE)objdump
PKG_CONFIG ?= $(CROSS_COMPILE)pkg-config
2006-10-05 15:47:08 +05:30
AWK = awk
GENKSYMS = scripts/genksyms/genksyms
DEPMOD = /sbin/depmod
KALLSYMS = scripts/kallsyms
PERL = perl
CHECK = sparse
CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ -Wbitwise $(CF)
MODFLAGS = -DMODULE
CFLAGS_MODULE = $(MODFLAGS)
AFLAGS_MODULE = $(MODFLAGS)
LDFLAGS_MODULE = -r
CFLAGS_KERNEL =
AFLAGS_KERNEL =
# Use LINUXINCLUDE when you must reference the include/ directory.
# Needed to be compatible with the O= option
2007-01-26 12:44:01 +05:30
CFLAGS := $(CFLAGS)
2008-06-04 16:58:24 +05:30
# Added only to final link stage of busybox binary
CFLAGS_busybox := $(CFLAGS_busybox)
2007-01-26 12:44:01 +05:30
CPPFLAGS := $(CPPFLAGS)
AFLAGS := $(AFLAGS)
LDFLAGS := $(LDFLAGS)
LDLIBS :=
2006-10-05 15:47:08 +05:30
# Read KERNELRELEASE from .kernelrelease (if it exists)
KERNELRELEASE = $(shell cat .kernelrelease 2> /dev/null)
KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION \
ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \
2007-04-06 02:44:29 +05:30
HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
2006-10-05 15:47:08 +05:30
export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
2006-10-05 15:47:08 +05:30
export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
2007-04-06 02:44:29 +05:30
export FLTFLAGS
2006-10-05 15:47:08 +05:30
# When compiling out-of-tree modules, put MODVERDIR in the module
# tree rather than in the kernel tree. The kernel tree might
# even be read-only.
export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
# Files to ignore in find ... statements
RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
# ===========================================================================
# Rules shared between *config targets and build targets
# Basic helpers built in scripts/
PHONY += scripts_basic
scripts_basic:
$(Q)$(MAKE) $(build)=scripts/basic
# To avoid any implicit rule to kick in, define an empty command.
scripts/basic/%: scripts_basic ;
# This target generates Kbuild's and Config.in's from *.c files
PHONY += gen_build_files
gen_build_files: $(wildcard $(srctree)/*/*.c) $(wildcard $(srctree)/*/*/*.c) $(wildcard $(srctree)/embed/*)
$(Q)$(srctree)/scripts/gen_build_files.sh $(srctree) $(objtree)
# bbox: we have helpers in applets/
# we depend on scripts_basic, since scripts/basic/fixdep
# must be built before any other host prog
PHONY += applets_dir
applets_dir: scripts_basic gen_build_files include/config/MARKER
$(Q)$(MAKE) $(build)=applets
applets/%: applets_dir ;
2006-10-05 15:47:08 +05:30
PHONY += outputmakefile
# outputmakefile generates a Makefile in the output directory, if using a
# separate output directory. This allows convenient use of make in the
# output directory.
outputmakefile:
ifneq ($(KBUILD_SRC),)
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
$(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
endif
2006-10-05 15:47:08 +05:30
# To make sure we do not include .config for any of the *config targets
# catch them early, and hand them over to scripts/kconfig/Makefile
# It is allowed to specify more targets when calling make, including
# mixing *config targets and build targets.
# For example 'make oldconfig all'.
2006-10-05 15:47:08 +05:30
# Detect when mixed targets is specified, and make a second invocation
# of make so .config is not included in this case either (for *config).
no-dot-config-targets := clean mrproper distclean \
2008-04-11 01:29:20 +05:30
cscope TAGS tags help %docs
#bbox# check% is removed from above
2006-10-05 15:47:08 +05:30
config-targets := 0
mixed-targets := 0
dot-config := 1
ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
dot-config := 0
endif
endif
2006-10-05 15:47:08 +05:30
ifeq ($(KBUILD_EXTMOD),)
ifneq ($(filter config %config,$(MAKECMDGOALS)),)
config-targets := 1
ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
mixed-targets := 1
endif
endif
endif
2006-03-14 00:34:00 +05:30
2006-10-05 15:47:08 +05:30
ifeq ($(mixed-targets),1)
# ===========================================================================
# We're called with mixed targets (*config and build targets).
# Handle them one by one.
2006-10-05 15:47:08 +05:30
%:: FORCE
$(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
2006-10-05 15:47:08 +05:30
else
ifeq ($(config-targets),1)
# ===========================================================================
# *config targets only - make sure prerequisites are updated, and descend
# in scripts/kconfig to make the *config target
# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
# KBUILD_DEFCONFIG may point out an alternative default configuration
# used for 'make defconfig'
-include $(srctree)/arch/$(ARCH)/Makefile
export KBUILD_DEFCONFIG
config: scripts_basic outputmakefile gen_build_files FORCE
$(Q)mkdir -p include
$(Q)$(MAKE) $(build)=scripts/kconfig $@
$(Q)$(MAKE) -C $(srctree) KBUILD_SRC= .kernelrelease
%config: scripts_basic outputmakefile gen_build_files FORCE
$(Q)mkdir -p include
2006-10-05 15:47:08 +05:30
$(Q)$(MAKE) $(build)=scripts/kconfig $@
$(Q)$(MAKE) -C $(srctree) KBUILD_SRC= .kernelrelease
2006-10-05 15:47:08 +05:30
else
# ===========================================================================
# Build targets only - this includes busybox, arch specific targets, clean
# targets and others. In general all targets except *config targets.
ifeq ($(KBUILD_EXTMOD),)
# Additional helpers built in scripts/
# Carefully list dependencies so we do not try to build scripts twice
# in parallel
2006-10-05 15:47:08 +05:30
PHONY += scripts
scripts: gen_build_files scripts_basic include/config/MARKER
2006-10-05 15:47:08 +05:30
$(Q)$(MAKE) $(build)=$(@)
scripts_basic: include/autoconf.h
# Objects we will link into busybox / subdirs we need to visit
core-y := \
applets/ \
libs-y := \
archival/ \
archival/libarchive/ \
2006-10-05 15:47:08 +05:30
console-tools/ \
coreutils/ \
coreutils/libcoreutils/ \
debianutils/ \
klibc-utils/ \
2006-10-05 15:47:08 +05:30
e2fsprogs/ \
editors/ \
findutils/ \
init/ \
libbb/ \
libpwdgrp/ \
loginutils/ \
mailutils/ \
2006-10-05 15:47:08 +05:30
miscutils/ \
modutils/ \
networking/ \
networking/libiproute/ \
networking/udhcp/ \
printutils/ \
2006-10-05 15:47:08 +05:30
procps/ \
runit/ \
selinux/ \
2006-10-05 15:47:08 +05:30
shell/ \
sysklogd/ \
util-linux/ \
util-linux/volume_id/ \
2006-10-05 15:47:08 +05:30
endif # KBUILD_EXTMOD
ifeq ($(dot-config),1)
# In this section, we need .config
2006-10-05 15:47:08 +05:30
# Read in dependencies to all Kconfig* files, make sure to run
# oldconfig if changes are detected.
-include .kconfig.d
-include .config
2006-10-05 15:47:08 +05:30
# If .config needs to be updated, it will be done via the dependency
# that autoconf has on .config.
# To avoid any implicit rule to kick in, define an empty command
.config .kconfig.d: ;
-include $(srctree)/arch/$(ARCH)/Makefile
# Now we can define CFLAGS etc according to .config
include $(srctree)/Makefile.flags
2006-10-05 15:47:08 +05:30
# If .config is newer than include/autoconf.h, someone tinkered
# with it and forgot to run make oldconfig.
# If kconfig.d is missing then we are probarly in a cleaned tree so
# we execute the config step to be sure to catch updated Kconfig files
include/autoconf.h: .kconfig.d .config $(wildcard $(srctree)/*/*.c) $(wildcard $(srctree)/*/*/*.c) | gen_build_files
2006-10-05 15:47:08 +05:30
$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
include/usage.h: gen_build_files
2006-10-05 15:47:08 +05:30
else
# Dummy target needed, because used as prerequisite
include/autoconf.h: ;
endif
2006-03-14 00:34:00 +05:30
2006-10-05 15:47:08 +05:30
# The all: target is the default when no target is given on the
# command line.
# This allow a user to issue only 'make' to build a kernel including modules
# Defaults busybox but it is usually overridden in the arch makefile
2008-08-22 02:45:28 +05:30
all: busybox doc
2006-10-05 15:47:08 +05:30
# arch Makefile may override CC so keep this after arch Makefile is included
#bbox# NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
CHECKFLAGS += $(NOSTDINC_FLAGS)
2006-10-05 15:47:08 +05:30
# Default kernel image to build when no specific target is given.
# KBUILD_IMAGE may be overruled on the commandline or
# set in the environment
# Also any assignments in arch/$(ARCH)/Makefile take precedence over
# this default value
export KBUILD_IMAGE ?= busybox
#
# INSTALL_PATH specifies where to place the updated kernel and system map
# images. Default is /boot, but you can set it to other values
export INSTALL_PATH ?= /boot
#
# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
# relocations required by build roots. This is not defined in the
# makefile but the argument can be passed to make if needed.
2006-10-05 15:47:08 +05:30
#
MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
export MODLIB
ifeq ($(KBUILD_EXTMOD),)
busybox-dirs := $(patsubst %/,%,$(filter %/, $(core-y) $(core-m) $(libs-y) $(libs-m)))
busybox-alldirs := $(sort $(busybox-dirs) $(patsubst %/,%,$(filter %/, \
$(core-n) $(core-) $(libs-n) $(libs-) \
)))
core-y := $(patsubst %/, %/built-in.o, $(core-y))
libs-y1 := $(patsubst %/, %/lib.a, $(libs-y))
libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y))
libs-y := $(libs-y1) $(libs-y2)
2006-10-05 15:47:08 +05:30
# Build busybox
# ---------------------------------------------------------------------------
2006-10-05 15:47:08 +05:30
# busybox is build from the objects selected by $(busybox-init) and
# $(busybox-main). Most are built-in.o files from top-level directories
# in the kernel tree, others are specified in arch/$(ARCH)Makefile.
# Ordering when linking is important, and $(busybox-init) must be first.
#
# busybox
# ^
# |
# +-< $(busybox-init)
# | +--< init/version.o + more
# |
# +--< $(busybox-main)
# | +--< driver/built-in.o mm/built-in.o + more
# |
# +-< kallsyms.o (see description in CONFIG_KALLSYMS section)
#
# busybox version (uname -v) cannot be updated during normal
# descending-into-subdirs phase since we do not yet know if we need to
# update busybox.
# Therefore this step is delayed until just before final link of busybox -
# except in the kallsyms case where it is done just before adding the
# symbols to the kernel.
#
# System.map is generated to document addresses of all kernel symbols
busybox-all := $(core-y) $(libs-y)
# Rule to link busybox - also used during CONFIG_KALLSYMS
# May be overridden by arch/$(ARCH)/Makefile
quiet_cmd_busybox__ ?= LINK $@
cmd_busybox__ ?= $(srctree)/scripts/trylink \
"$@" \
"$(CC)" \
2008-06-04 16:58:24 +05:30
"$(CFLAGS) $(CFLAGS_busybox)" \
"$(LDFLAGS) $(EXTRA_LDFLAGS)" \
"$(core-y)" \
"$(libs-y)" \
"$(LDLIBS)" \
&& $(srctree)/scripts/generate_BUFSIZ.sh --post include/common_bufsiz.h
2006-10-05 15:47:08 +05:30
# Generate System.map
quiet_cmd_sysmap = SYSMAP
2006-10-05 15:47:08 +05:30
cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
# Link of busybox
# If CONFIG_KALLSYMS is set .version is already updated
# Generate System.map and verify that the content is consistent
# Use + in front of the busybox_version rule to silent warning with make -j2
# First command is ':' to allow us to use + in front of the rule
define rule_busybox__
:
$(call cmd,busybox__)
$(Q)echo 'cmd_$@ := $(cmd_busybox__)' > $(@D)/.$(@F).cmd
endef
ifdef CONFIG_KALLSYMS
# Generate section listing all symbols and add it into busybox $(kallsyms.o)
# It's a three stage process:
# o .tmp_busybox1 has all symbols and sections, but __kallsyms is
# empty
# Running kallsyms on that gives us .tmp_kallsyms1.o with
# the right size - busybox version (uname -v) is updated during this step
# o .tmp_busybox2 now has a __kallsyms section of the right size,
# but due to the added section, some addresses have shifted.
# From here, we generate a correct .tmp_kallsyms2.o
# o The correct .tmp_kallsyms2.o is linked into the final busybox.
# o Verify that the System.map from busybox matches the map from
# .tmp_busybox2, just in case we did not generate kallsyms correctly.
# o If CONFIG_KALLSYMS_EXTRA_PASS is set, do an extra pass using
# .tmp_busybox3 and .tmp_kallsyms3.o. This is only meant as a
# temporary bypass to allow the kernel to be built while the
# maintainers work out what went wrong with kallsyms.
ifdef CONFIG_KALLSYMS_EXTRA_PASS
last_kallsyms := 3
else
last_kallsyms := 2
endif
2006-10-05 15:47:08 +05:30
kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
2006-10-05 15:47:08 +05:30
define verify_kallsyms
$(Q)$(if $($(quiet)cmd_sysmap), \
echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \
$(cmd_sysmap) .tmp_busybox$(last_kallsyms) .tmp_System.map
$(Q)cmp -s System.map .tmp_System.map || \
(echo Inconsistent kallsyms data; \
echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \
rm .tmp_kallsyms* ; /bin/false )
endef
2006-10-05 15:47:08 +05:30
# Update busybox version before link
# Use + in front of this rule to silent warning about make -j1
# First command is ':' to allow us to use + in front of this rule
cmd_ksym_ld = $(cmd_busybox__)
define rule_ksym_ld
:
2006-10-05 15:47:08 +05:30
+$(call cmd,busybox_version)
$(call cmd,busybox__)
$(Q)echo 'cmd_$@ := $(cmd_busybox__)' > $(@D)/.$(@F).cmd
endef
2006-10-05 15:47:08 +05:30
# Generate .S file with all kernel symbols
quiet_cmd_kallsyms = KSYM $@
cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
$(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
2006-10-05 15:47:08 +05:30
.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
$(call if_changed_dep,as_o_S)
2006-10-05 15:47:08 +05:30
.tmp_kallsyms%.S: .tmp_busybox% $(KALLSYMS)
$(call cmd,kallsyms)
2006-10-05 15:47:08 +05:30
# .tmp_busybox1 must be complete except kallsyms, so update busybox version
.tmp_busybox1: $(busybox-lds) $(busybox-all) FORCE
$(call if_changed_rule,ksym_ld)
2006-10-05 15:47:08 +05:30
.tmp_busybox2: $(busybox-lds) $(busybox-all) .tmp_kallsyms1.o FORCE
$(call if_changed,busybox__)
2006-10-05 15:47:08 +05:30
.tmp_busybox3: $(busybox-lds) $(busybox-all) .tmp_kallsyms2.o FORCE
$(call if_changed,busybox__)
2006-10-05 15:47:08 +05:30
# Needs to visit scripts/ before $(KALLSYMS) can be used.
$(KALLSYMS): scripts ;
2006-10-05 15:47:08 +05:30
# Generate some data for debugging strange kallsyms problems
debug_kallsyms: .tmp_map$(last_kallsyms)
2006-03-14 00:34:00 +05:30
2006-10-05 15:47:08 +05:30
.tmp_map%: .tmp_busybox% FORCE
($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
2006-10-05 15:47:08 +05:30
.tmp_map3: .tmp_map2
2006-10-05 15:47:08 +05:30
.tmp_map2: .tmp_map1
2006-10-05 15:47:08 +05:30
endif # ifdef CONFIG_KALLSYMS
2001-10-24 13:28:02 +05:30
2006-10-05 15:47:08 +05:30
# busybox image - including updated kernel symbols
busybox_unstripped: $(busybox-all) FORCE
$(call if_changed_rule,busybox__)
$(Q)rm -f .old_version
busybox: busybox_unstripped
ifeq ($(SKIP_STRIP),y)
$(Q)cp $< $@
else
$(Q)$(STRIP) -s --remove-section=.note --remove-section=.comment \
2006-10-05 15:47:08 +05:30
busybox_unstripped -o $@
2008-06-24 04:01:52 +05:30
# strip is confused by PIE executable and does not set exec bits
$(Q)chmod a+x $@
endif
2006-10-05 15:47:08 +05:30
# The actual objects are generated when descending,
2006-10-05 15:47:08 +05:30
# make sure no implicit rule kicks in
$(sort $(busybox-all)): $(busybox-dirs) ;
# Handle descending into subdirectories listed in $(busybox-dirs)
# Preset locale variables to speed up the build process. Limit locale
# tweaks to this spot to avoid wrong language settings when running
# make menuconfig etc.
# Error messages still appears in the original language
PHONY += $(busybox-dirs)
$(busybox-dirs): prepare scripts
$(Q)$(MAKE) $(build)=$@
# Build the kernel release string
# The KERNELRELEASE is stored in a file named .kernelrelease
# to be used when executing for example make install or make modules_install
#
# Take the contents of any files called localversion* and the config
# variable CONFIG_LOCALVERSION and append them to KERNELRELEASE.
# LOCALVERSION from the command line override all of this
nullstring :=
space := $(nullstring) # end of line
___localver = $(objtree)/localversion* $(srctree)/localversion*
__localver = $(sort $(wildcard $(___localver)))
# skip backup files (containing '~')
_localver = $(foreach f, $(__localver), $(if $(findstring ~, $(f)),,$(f)))
localver = $(subst $(space),, \
$(shell cat /dev/null $(_localver)) \
$(patsubst "%",%,$(CONFIG_LOCALVERSION)))
2006-10-05 15:47:08 +05:30
# If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called
# and if the SCM is know a tag from the SCM is appended.
# The appended tag is determinded by the SCM used.
#
# Currently, only git is supported.
# Other SCMs can edit scripts/setlocalversion and add the appropriate
# checks as needed.
ifdef _BB_DISABLED_CONFIG_LOCALVERSION_AUTO
2006-10-05 15:47:08 +05:30
_localver-auto = $(shell $(CONFIG_SHELL) \
$(srctree)/scripts/setlocalversion $(srctree))
localver-auto = $(LOCALVERSION)$(_localver-auto)
endif
2006-10-05 15:47:08 +05:30
localver-full = $(localver)$(localver-auto)
# Store (new) KERNELRELASE string in .kernelrelease
kernelrelease = $(KERNELVERSION)$(localver-full)
.kernelrelease: FORCE
$(Q)rm -f $@
$(Q)echo $(kernelrelease) > $@
# Things we need to do before we recursively start building the kernel
# or the modules are listed in "prepare".
# A multi level approach is used. prepareN is processed before prepareN-1.
# archprepare is used in arch Makefiles and when processed asm symlink,
# version.h and scripts_basic is processed / created.
# Listed in dependency order
PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
# prepare-all is deprecated, use prepare as valid replacement
PHONY += prepare-all
# prepare3 is used to check if we are building in a separate output directory,
# and if so do:
# 1) Check that make has not been executed in the kernel src $(srctree)
# 2) Create the include2 directory, used for the second asm symlink
prepare3: .kernelrelease
ifneq ($(KBUILD_SRC),)
2007-08-13 02:29:07 +05:30
@echo ' Using $(srctree) as source for busybox'
2006-10-05 15:47:08 +05:30
$(Q)if [ -f $(srctree)/.config ]; then \
echo " $(srctree) is not clean, please run 'make mrproper'";\
echo " in the '$(srctree)' directory.";\
/bin/false; \
fi;
$(Q)if [ ! -d include2 ]; then mkdir -p include2; fi;
$(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm
endif
2006-10-05 15:47:08 +05:30
# prepare2 creates a makefile if using a separate output directory
prepare2: prepare3 outputmakefile
prepare1: prepare2 include/config/MARKER
ifneq ($(KBUILD_MODULES),)
$(Q)mkdir -p $(MODVERDIR)
$(Q)rm -f $(MODVERDIR)/*
endif
archprepare: prepare1 scripts_basic applets_dir
2006-10-05 15:47:08 +05:30
prepare0: archprepare FORCE
$(Q)$(MAKE) $(build)=.
2006-10-05 15:47:08 +05:30
# All the preparing..
prepare prepare-all: prepare0
2006-10-05 15:47:08 +05:30
# Leave this as default for preprocessing busybox.lds.S, which is now
# done in arch/$(ARCH)/kernel/Makefile
2006-10-05 15:47:08 +05:30
export CPPFLAGS_busybox.lds += -P -C -U$(ARCH)
# FIXME: The asm symlink changes when $(ARCH) changes. That's
# hard to detect, but I suppose "make mrproper" is a good idea
# before switching between archs anyway.
#bbox# include/asm:
#bbox# @echo ' SYMLINK $@ -> include/asm-$(ARCH)'
#bbox# $(Q)if [ ! -d include ]; then mkdir -p include; fi;
#bbox# @ln -fsn asm-$(ARCH) $@
# Split autoconf.h into include/linux/config/*
quiet_cmd_gen_bbconfigopts = GEN include/bbconfigopts.h
cmd_gen_bbconfigopts = $(srctree)/scripts/mkconfigs include/bbconfigopts.h include/bbconfigopts_bz2.h
quiet_cmd_gen_common_bufsiz = GEN include/common_bufsiz.h
cmd_gen_common_bufsiz = $(srctree)/scripts/generate_BUFSIZ.sh include/common_bufsiz.h
quiet_cmd_split_autoconf = SPLIT include/autoconf.h -> include/config/*
cmd_split_autoconf = scripts/basic/split-include include/autoconf.h include/config
quiet_cmd_gen_embedded_scripts = GEN include/embedded_scripts.h
Treat custom and applet scripts as applets BusyBox has support for embedded shell scripts. Two types can be distinguished: custom scripts and scripts implementing applets. Custom scripts should be placed in the 'embed' directory at build time. They are given a default applet configuration and appear as applets to the user but no further configuration is possible. Applet scripts are integrated with the BusyBox build system and are intended to be used to ship standard applets that just happen to be implemented as scripts. They can be configured at build time and appear just like native applets. Such scripts should be placed in the 'applets_sh' directory. A stub C program should be written to provide the usual applet configuration details and placed in a suitable subsystem directory. It may be helpful to have a configuration option to enable any dependencies the script requires: see the 'nologin' applet for an example. function old new delta scripted_main - 41 +41 applet_names 2773 2781 +8 applet_main 1600 1604 +4 i2cdetect_main 672 674 +2 applet_suid 100 101 +1 applet_install_loc 200 201 +1 applet_flags 100 101 +1 packed_usage 33180 33179 -1 tryexec 159 152 -7 evalcommand 1661 1653 -8 script_names 9 - -9 packed_scripts 123 114 -9 complete_cmd_dir_file 826 811 -15 shellexec 271 254 -17 find_command 1007 990 -17 busybox_main 642 624 -18 run_applet_and_exit 100 78 -22 find_script_by_name 51 - -51 ------------------------------------------------------------------------------ (add/remove: 1/2 grow/shrink: 6/9 up/down: 58/-174) Total: -116 bytes text data bss dec hex filename 950034 477 7296 957807 e9d6f busybox_old 949918 477 7296 957691 e9cfb busybox_unstripped Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-17 23:18:14 +05:30
cmd_gen_embedded_scripts = $(srctree)/scripts/embedded_scripts include/embedded_scripts.h $(srctree)/embed $(srctree)/applets_sh
2006-10-05 15:47:08 +05:30
#bbox# piggybacked generation of few .h files
include/config/MARKER: scripts/basic/split-include include/autoconf.h $(wildcard $(srctree)/embed/*) $(wildcard $(srctree)/applets_sh/*) $(srctree)/scripts/embedded_scripts
$(call cmd,split_autoconf)
$(call cmd,gen_bbconfigopts)
$(call cmd,gen_common_bufsiz)
$(call cmd,gen_embedded_scripts)
2006-10-05 15:47:08 +05:30
@touch $@
# Generate some files
# ---------------------------------------------------------------------------
# KERNELRELEASE can change from a few different places, meaning version.h
# needs to be updated, so this check is forced on all builds
uts_len := 64
define filechk_version.h
if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
exit 1; \
fi; \
(echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"; \
echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \
echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \
)
endef
# ---------------------------------------------------------------------------
PHONY += depend dep
depend dep:
@echo '*** Warning: make $@ is unnecessary now.'
# ---------------------------------------------------------------------------
# Modules
ifdef _BB_DISABLED_CONFIG_MODULES
2006-10-05 15:47:08 +05:30
# By default, build modules as well
all: modules
# Build modules
PHONY += modules
modules: $(busybox-dirs) $(if $(KBUILD_BUILTIN),busybox)
@echo ' Building modules, stage 2.';
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
# Target to prepare building external modules
PHONY += modules_prepare
modules_prepare: prepare scripts
# Target to install modules
PHONY += modules_install
modules_install: _modinst_ _modinst_post
PHONY += _modinst_
_modinst_:
@if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
echo "Warning: you may need to install module-init-tools"; \
echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
sleep 1; \
fi
@rm -rf $(MODLIB)/kernel
@rm -f $(MODLIB)/source
@mkdir -p $(MODLIB)/kernel
@ln -s $(srctree) $(MODLIB)/source
@if [ ! $(objtree) -ef $(MODLIB)/build ]; then \
rm -f $(MODLIB)/build ; \
ln -s $(objtree) $(MODLIB)/build ; \
fi
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
# If System.map exists, run depmod. This deliberately does not have a
# dependency on System.map since that would run the dependency tree on
# busybox. This depmod is only for convenience to give the initial
# boot a modules.dep even before / is mounted read-write. However the
# boot script depmod is the master version.
ifeq "$(strip $(INSTALL_MOD_PATH))" ""
depmod_opts :=
else
depmod_opts := -b $(INSTALL_MOD_PATH) -r
endif
PHONY += _modinst_post
_modinst_post: _modinst_
if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi
else # CONFIG_MODULES
# Modules not configured
# ---------------------------------------------------------------------------
modules modules_install: FORCE
@echo
@echo "The present busybox configuration has modules disabled."
2006-10-05 15:47:08 +05:30
@echo "Type 'make config' and enable loadable module support."
@echo "Then build a kernel with module support enabled."
@echo
2006-10-05 15:47:08 +05:30
@exit 1
2006-10-05 15:47:08 +05:30
endif # CONFIG_MODULES
2002-04-13 19:09:48 +05:30
2006-10-05 15:47:08 +05:30
###
# Cleaning is done on three levels.
# make clean Delete most generated files
# Leave enough to build external modules
# make mrproper Delete the current configuration, and all generated files
# make distclean Remove editor backup files, patch leftover files and the like
# Directories & files removed with 'make clean'
CLEAN_DIRS += $(MODVERDIR) _install 0_lib
CLEAN_FILES += busybox busybox_unstripped* busybox.links \
System.map .kernelrelease \
2006-10-05 15:47:08 +05:30
.tmp_kallsyms* .tmp_version .tmp_busybox* .tmp_System.map
# Directories & files removed with 'make mrproper'
MRPROPER_DIRS += include/config include2
MRPROPER_FILES += .config .config.old include/asm .version .old_version \
include/NUM_APPLETS.h \
include/common_bufsiz.h \
include/autoconf.h \
include/bbconfigopts.h \
include/bbconfigopts_bz2.h \
include/embedded_scripts.h \
include/usage_compressed.h \
include/applet_tables.h \
include/applets.h \
include/usage.h \
applets/usage \
.kernelrelease Module.symvers tags TAGS cscope* \
busybox_old
2006-10-05 15:47:08 +05:30
# clean - Delete most, but leave enough to build external modules
#
clean: rm-dirs := $(CLEAN_DIRS)
clean: rm-files := $(CLEAN_FILES)
clean-dirs := $(addprefix _clean_,$(srctree) $(busybox-alldirs))
PHONY += $(clean-dirs) clean archclean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
clean: archclean $(clean-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
@find . $(RCS_FIND_IGNORE) \
2008-07-13 04:32:43 +05:30
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
2006-10-05 15:47:08 +05:30
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
-type f -print | xargs rm -f
2008-08-21 19:17:20 +05:30
PHONY += doc-clean
doc-clean: rm-files := docs/busybox.pod \
docs/BusyBox.html docs/busybox.1 docs/BusyBox.txt
2008-08-21 19:17:20 +05:30
doc-clean:
$(call cmd,rmfiles)
2006-10-05 15:47:08 +05:30
# mrproper - Delete all generated files, including .config
#
mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
mrproper-dirs := $(addprefix _mrproper_,scripts)
2006-10-05 15:47:08 +05:30
PHONY += $(mrproper-dirs) mrproper archmrproper
$(mrproper-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
2006-10-05 15:47:08 +05:30
mrproper: clean archmrproper $(mrproper-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
@find . -name Config.src | sed 's/.src$$/.in/' | xargs -r rm -f
@find . -name Kbuild.src | sed 's/.src$$//' | xargs -r rm -f
2006-10-05 15:47:08 +05:30
# distclean
#
PHONY += distclean
2006-10-05 15:47:08 +05:30
distclean: mrproper
@find $(srctree) $(RCS_FIND_IGNORE) \
2008-07-13 04:32:43 +05:30
\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
2006-10-05 15:47:08 +05:30
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
2008-07-13 04:32:43 +05:30
-o -name '.*.rej' -o -name '*.tmp' -o -size 0 \
2006-10-05 15:47:08 +05:30
-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
-type f -print | xargs rm -f
2006-10-05 15:47:08 +05:30
# Packaging of the kernel to various formats
# ---------------------------------------------------------------------------
# rpm target kept for backward compatibility
package-dir := $(srctree)/scripts/package
2006-10-05 15:47:08 +05:30
%pkg: FORCE
$(Q)$(MAKE) $(build)=$(package-dir) $@
rpm: FORCE
$(Q)$(MAKE) $(build)=$(package-dir) $@
2006-10-05 15:47:08 +05:30
# Brief documentation of the typical targets used
# ---------------------------------------------------------------------------
boards := $(wildcard $(srctree)/configs/*_defconfig)
2006-10-05 15:47:08 +05:30
boards := $(notdir $(boards))
-include $(srctree)/Makefile.help
2006-10-05 15:47:08 +05:30
# Documentation targets
# ---------------------------------------------------------------------------
%docs: scripts_basic FORCE
$(Q)$(MAKE) $(build)=Documentation/DocBook $@
else # KBUILD_EXTMOD
###
# External module support.
# When building external modules the kernel used as basis is considered
# read-only, and no consistency checks are made and the make
# system is not used on the basis kernel. If updates are required
# in the basis kernel ordinary make commands (without M=...) must
# be used.
#
# The following are the only valid targets when building external
# modules.
# make M=dir clean Delete all automatically generated files
# make M=dir modules Make all modules in specified dir
# make M=dir Same as 'make M=dir modules'
# make M=dir modules_install
# Install the modules build in the module directory
# Assumes install directory is already created
# We are always building modules
KBUILD_MODULES := 1
PHONY += crmodverdir
crmodverdir:
$(Q)mkdir -p $(MODVERDIR)
$(Q)rm -f $(MODVERDIR)/*
PHONY += $(objtree)/Module.symvers
$(objtree)/Module.symvers:
@test -e $(objtree)/Module.symvers || ( \
echo; \
echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \
echo " is missing; modules will have no dependencies and modversions."; \
echo )
module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
PHONY += $(module-dirs) modules
$(module-dirs): crmodverdir $(objtree)/Module.symvers
$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
modules: $(module-dirs)
@echo ' Building modules, stage 2.';
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
PHONY += modules_install
modules_install: _emodinst_ _emodinst_post
install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
PHONY += _emodinst_
_emodinst_:
$(Q)mkdir -p $(MODLIB)/$(install-dir)
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
# Run depmod only is we have System.map and depmod is executable
quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
cmd_depmod = if [ -r System.map -a -x $(DEPMOD) ]; then \
$(DEPMOD) -ae -F System.map \
$(if $(strip $(INSTALL_MOD_PATH)), \
-b $(INSTALL_MOD_PATH) -r) \
$(KERNELRELEASE); \
fi
PHONY += _emodinst_post
_emodinst_post: _emodinst_
$(call cmd,depmod)
clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
PHONY += $(clean-dirs) clean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
clean: rm-dirs := $(MODVERDIR)
clean: $(clean-dirs)
$(call cmd,rmdirs)
@find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \
2008-07-13 04:32:43 +05:30
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
2006-10-05 15:47:08 +05:30
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
-type f -print | xargs rm -f
2006-10-05 15:47:08 +05:30
# Dummies...
PHONY += prepare scripts
prepare: ;
scripts: ;
endif # KBUILD_EXTMOD
# Generate tags for editors
# ---------------------------------------------------------------------------
2006-10-05 15:47:08 +05:30
#We want __srctree to totally vanish out when KBUILD_OUTPUT is not set
#(which is the most common case IMHO) to avoid unneeded clutter in the big tags file.
#Adding $(srctree) adds about 20M on i386 to the size of the output file!
2006-10-05 15:47:08 +05:30
ifeq ($(src),$(obj))
__srctree =
else
__srctree = $(srctree)/
endif
2006-10-05 15:47:08 +05:30
ifeq ($(ALLSOURCE_ARCHS),)
ifeq ($(ARCH),um)
ALLINCLUDE_ARCHS := $(ARCH) $(SUBARCH)
else
ALLINCLUDE_ARCHS := $(ARCH)
endif
else
#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behaviour.
ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
endif
ALLSOURCE_ARCHS := $(ARCH)
define all-sources
( find -regex '.*\.[ch]$$' )
2006-10-05 15:47:08 +05:30
endef
quiet_cmd_cscope-file = FILELST cscope.files
cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files
quiet_cmd_cscope = MAKE cscope.out
cmd_cscope = cscope -b
cscope: FORCE
$(call cmd,cscope-file)
$(call cmd,cscope)
quiet_cmd_TAGS = MAKE $@
define cmd_TAGS
rm -f $@; \
ETAGSF=`etags --version | grep -i exuberant >/dev/null && \
echo "-I __initdata,__exitdata,__acquires,__releases \
-I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \
--extra=+f --c-kinds=+px"`; \
$(all-sources) | xargs etags $$ETAGSF -a
endef
TAGS: FORCE
$(call cmd,TAGS)
quiet_cmd_tags = MAKE $@
define cmd_tags
rm -f $@; \
CTAGSF=`ctags --version | grep -i exuberant >/dev/null && \
echo "-I __initdata,__exitdata,__acquires,__releases \
-I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \
--extra=+f --c-kinds=+px"`; \
$(all-sources) | xargs ctags $$CTAGSF -a
endef
tags: FORCE
$(call cmd,tags)
# Scripts to check various things for consistency
# ---------------------------------------------------------------------------
includecheck:
find * $(RCS_FIND_IGNORE) \
-name '*.[hcS]' -type f -print | sort \
| xargs $(PERL) -w scripts/checkincludes.pl
versioncheck:
find * $(RCS_FIND_IGNORE) \
-name '*.[hcS]' -type f -print | sort \
| xargs $(PERL) -w scripts/checkversion.pl
namespacecheck:
$(PERL) $(srctree)/scripts/namespace.pl
endif #ifeq ($(config-targets),1)
endif #ifeq ($(mixed-targets),1)
PHONY += checkstack
checkstack:
$(OBJDUMP) -d busybox $$(find . -name '*.ko') | \
$(PERL) $(src)/scripts/checkstack.pl $(ARCH)
kernelrelease:
$(if $(wildcard .kernelrelease), $(Q)echo $(KERNELRELEASE), \
$(error kernelrelease not valid - run 'make *config' to update it))
kernelversion:
@echo $(KERNELVERSION)
# Single targets
# ---------------------------------------------------------------------------
# Single targets are compatible with:
# - build whith mixed source and output
# - build with separate output dir 'make O=...'
# - external modules
#
# target-dir => where to store outputfile
# build-dir => directory in kernel source tree to use
ifeq ($(KBUILD_EXTMOD),)
build-dir = $(patsubst %/,%,$(dir $@))
target-dir = $(dir $@)
else
zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
endif
%.s: %.c prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
%.i: %.c prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
%.o: %.c prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
%.lst: %.c prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
%.s: %.S prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
%.o: %.S prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
# Modules
%/: prepare scripts FORCE
2006-10-05 15:47:08 +05:30
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
$(build)=$(build-dir)
/: prepare scripts FORCE
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
$(build)=$(build-dir)
2006-10-05 15:47:08 +05:30
%.ko: prepare scripts FORCE
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
$(build)=$(build-dir) $(@:.ko=.o)
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
# FIXME Should go into a make.lib or something
2006-10-05 15:47:08 +05:30
# ===========================================================================
quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
cmd_rmdirs = rm -rf $(rm-dirs)
quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
cmd_rmfiles = rm -f $(rm-files)
a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \
$(NOSTDINC_FLAGS) $(CPPFLAGS) \
$(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
quiet_cmd_as_o_S = AS $@
cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
# read all saved command lines
targets := $(wildcard $(sort $(targets)))
cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
ifneq ($(cmd_files),)
$(cmd_files): ; # Do not try to update included dependency files
include $(cmd_files)
endif
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
endif # skip-makefile
PHONY += FORCE
FORCE:
-include $(srctree)/Makefile.custom
2006-03-14 00:34:00 +05:30
2006-10-05 15:47:08 +05:30
# Declare the contents of the .PHONY variable as phony. We keep that
# information in a variable se we can use it in if_changed and friends.
.PHONY: $(PHONY)