busybox/archival/libarchive/decompress_gunzip.c

1293 lines
36 KiB
C
Raw Normal View History

2001-04-11 08:41:33 +05:30
/* vi: set sw=4 ts=4: */
/*
* gunzip implementation for busybox
*
* Based on GNU gzip v1.2.4 Copyright (C) 1992-1993 Jean-loup Gailly.
*
* Originally adjusted for busybox by Sven Rudolph <sr1@inf.tu-dresden.de>
* based on gzip sources
*
* Adjusted further by Erik Andersen <andersen@codepoet.org> to support
2001-12-06 13:50:14 +05:30
* files as well as stdin/stdout, and to generally behave itself wrt
2001-04-11 08:41:33 +05:30
* command line handling.
*
* General cleanup to better adhere to the style guide and make use of standard
2007-09-21 18:46:32 +05:30
* busybox functions by Glenn McGrath
*
* read_gz interface + associated hacking by Laurence Anderson
*
* Fixed huft_build() so decoding end-of-block code does not grab more bits
* than necessary (this is required by unzip applet), added inflate_cleanup()
* to free leaked bytebuffer memory (used in unzip.c), and some minor style
* guide cleanups by Ed Clark
*
2001-04-11 08:41:33 +05:30
* gzip (GNU zip) -- compress files with zip algorithm and 'compress' interface
* Copyright (C) 1992-1993 Jean-loup Gailly
* The unzip code was written and put in the public domain by Mark Adler.
* Portions of the lzw code are derived from the public domain 'compress'
* written by Spencer Thomas, Joe Orost, James Woods, Jim McKie, Steve Davies,
* Ken Turkowski, Dave Mack and Peter Jannesen.
*
* See the file algorithm.doc for the compression algorithms and file formats.
2006-09-17 21:58:10 +05:30
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
2001-04-11 08:41:33 +05:30
*/
#include "libbb.h"
#include "bb_archive.h"
2001-04-11 08:41:33 +05:30
typedef struct huft_t {
2002-09-25 08:17:48 +05:30
unsigned char e; /* number of extra bits or operation */
unsigned char b; /* number of bits in this code or subcode */
union {
unsigned n; /* literal, length base, or distance base */
/* ^^^^^ was "unsigned short", but that results in larger code */
struct huft_t *t; /* pointer to next level of table */
2002-09-25 08:17:48 +05:30
} v;
} huft_t;
2001-04-11 08:41:33 +05:30
enum {
/* gunzip_window size--must be a power of two, and
* at least 32K for zip's deflate method */
GUNZIP_WSIZE = 0x8000,
/* If BMAX needs to be larger than 16, then h and x[] should be ulg. */
BMAX = 16, /* maximum bit length of any code (16 for explode) */
N_MAX = 288, /* maximum number of codes in any set */
};
/* This is somewhat complex-looking arrangement, but it allows
* to place decompressor state either in bss or in
* malloc'ed space simply by changing #defines below.
* Sizes on i386:
* text data bss dec hex
* 5256 0 108 5364 14f4 - bss
* 4915 0 0 4915 1333 - malloc
*/
#define STATE_IN_BSS 0
#define STATE_IN_MALLOC 1
typedef struct state_t {
off_t gunzip_bytes_out; /* number of output bytes */
uint32_t gunzip_crc;
int gunzip_src_fd;
unsigned gunzip_outbuf_count; /* bytes in output buffer */
unsigned char *gunzip_window;
uint32_t *gunzip_crc_table;
/* bitbuffer */
unsigned gunzip_bb; /* bit buffer */
unsigned char gunzip_bk; /* bits in bit buffer */
/* input (compressed) data */
unsigned char *bytebuffer; /* buffer itself */
off_t to_read; /* compressed bytes to read (unzip only, -1 for gunzip) */
// unsigned bytebuffer_max; /* buffer size */
unsigned bytebuffer_offset; /* buffer position */
unsigned bytebuffer_size; /* how much data is there (size <= max) */
/* private data of inflate_codes() */
unsigned inflate_codes_ml; /* masks for bl and bd bits */
unsigned inflate_codes_md; /* masks for bl and bd bits */
unsigned inflate_codes_bb; /* bit buffer */
unsigned inflate_codes_k; /* number of bits in bit buffer */
unsigned inflate_codes_w; /* current gunzip_window position */
huft_t *inflate_codes_tl;
huft_t *inflate_codes_td;
unsigned inflate_codes_bl;
unsigned inflate_codes_bd;
unsigned inflate_codes_nn; /* length and index for copy */
unsigned inflate_codes_dd;
smallint resume_copy;
/* private data of inflate_get_next_window() */
smallint method; /* method == -1 for stored, -2 for codes */
smallint need_another_block;
smallint end_reached;
/* private data of inflate_stored() */
unsigned inflate_stored_n;
unsigned inflate_stored_b;
unsigned inflate_stored_k;
unsigned inflate_stored_w;
const char *error_msg;
jmp_buf error_jmp;
} state_t;
#define gunzip_bytes_out (S()gunzip_bytes_out )
#define gunzip_crc (S()gunzip_crc )
#define gunzip_src_fd (S()gunzip_src_fd )
#define gunzip_outbuf_count (S()gunzip_outbuf_count)
#define gunzip_window (S()gunzip_window )
#define gunzip_crc_table (S()gunzip_crc_table )
#define gunzip_bb (S()gunzip_bb )
#define gunzip_bk (S()gunzip_bk )
#define to_read (S()to_read )
// #define bytebuffer_max (S()bytebuffer_max )
// Both gunzip and unzip can use constant buffer size now (16k):
#define bytebuffer_max 0x4000
#define bytebuffer (S()bytebuffer )
#define bytebuffer_offset (S()bytebuffer_offset )
#define bytebuffer_size (S()bytebuffer_size )
#define inflate_codes_ml (S()inflate_codes_ml )
#define inflate_codes_md (S()inflate_codes_md )
#define inflate_codes_bb (S()inflate_codes_bb )
#define inflate_codes_k (S()inflate_codes_k )
#define inflate_codes_w (S()inflate_codes_w )
#define inflate_codes_tl (S()inflate_codes_tl )
#define inflate_codes_td (S()inflate_codes_td )
#define inflate_codes_bl (S()inflate_codes_bl )
#define inflate_codes_bd (S()inflate_codes_bd )
#define inflate_codes_nn (S()inflate_codes_nn )
#define inflate_codes_dd (S()inflate_codes_dd )
#define resume_copy (S()resume_copy )
#define method (S()method )
#define need_another_block (S()need_another_block )
#define end_reached (S()end_reached )
#define inflate_stored_n (S()inflate_stored_n )
#define inflate_stored_b (S()inflate_stored_b )
#define inflate_stored_k (S()inflate_stored_k )
#define inflate_stored_w (S()inflate_stored_w )
#define error_msg (S()error_msg )
#define error_jmp (S()error_jmp )
/* This is a generic part */
#if STATE_IN_BSS /* Use global data segment */
#define DECLARE_STATE /*nothing*/
#define ALLOC_STATE /*nothing*/
#define DEALLOC_STATE ((void)0)
#define S() state.
#define PASS_STATE /*nothing*/
#define PASS_STATE_ONLY /*nothing*/
#define STATE_PARAM /*nothing*/
#define STATE_PARAM_ONLY void
static state_t state;
#endif
#if STATE_IN_MALLOC /* Use malloc space */
#define DECLARE_STATE state_t *state
#define ALLOC_STATE (state = xzalloc(sizeof(*state)))
#define DEALLOC_STATE free(state)
#define S() state->
#define PASS_STATE state,
#define PASS_STATE_ONLY state
#define STATE_PARAM state_t *state,
#define STATE_PARAM_ONLY state_t *state
#endif
2001-04-11 08:41:33 +05:30
static const uint16_t mask_bits[] ALIGN2 = {
2002-09-25 08:17:48 +05:30
0x0000, 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
2001-04-11 08:41:33 +05:30
0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
};
/* Put lengths/offsets and extra bits in a struct of arrays
* to make calls to huft_build() have one fewer parameter.
*/
struct cp_ext {
uint16_t cp[31];
uint8_t ext[31];
2002-09-25 08:17:48 +05:30
};
/* Copy lengths and extra bits for literal codes 257..285 */
2002-09-25 08:17:48 +05:30
/* note: see note #13 above about the 258 in this list. */
static const struct cp_ext lit = {
/*257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 */
/*0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 */
{ 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 99, 99 } /* 99 == invalid */
2002-09-25 08:17:48 +05:30
};
/* Copy offsets and extra bits for distance codes 0..29 */
static const struct cp_ext dist = {
/*0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 */
{ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, 8193, 12289, 16385, 24577 },
{ 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 13, 13 }
2002-09-25 08:17:48 +05:30
};
/* Tables for deflate from PKZIP's appnote.txt. */
/* Order of the bit length code lengths */
static const uint8_t border[] ALIGN1 = {
2002-09-25 08:17:48 +05:30
16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15
};
2002-08-23 00:11:20 +05:30
2001-04-11 08:41:33 +05:30
/*
* Free the malloc'ed tables built by huft_build(), which makes a linked
* list of the tables it made, with the links in a dummy first entry of
* each table.
2001-04-11 08:41:33 +05:30
* t: table to free
*/
static void huft_free(huft_t *p)
2001-04-11 08:41:33 +05:30
{
2002-09-25 08:17:48 +05:30
huft_t *q;
2001-04-11 08:41:33 +05:30
/* Go through linked list, freeing from the malloced (t[-1]) address. */
while (p) {
2001-04-11 08:41:33 +05:30
q = (--p)->v.t;
free(p);
2001-04-11 08:41:33 +05:30
p = q;
}
}
static void huft_free_all(STATE_PARAM_ONLY)
{
huft_free(inflate_codes_tl);
huft_free(inflate_codes_td);
inflate_codes_tl = NULL;
inflate_codes_td = NULL;
}
2008-07-05 14:48:54 +05:30
static void abort_unzip(STATE_PARAM_ONLY) NORETURN;
static void abort_unzip(STATE_PARAM_ONLY)
{
huft_free_all(PASS_STATE_ONLY);
longjmp(error_jmp, 1);
}
static unsigned fill_bitbuffer(STATE_PARAM unsigned bitbuffer, unsigned *current, const unsigned required)
{
while (*current < required) {
if (bytebuffer_offset >= bytebuffer_size) {
unsigned sz = bytebuffer_max - 4;
if (to_read >= 0 && to_read < sz) /* unzip only */
sz = to_read;
/* Leave the first 4 bytes empty so we can always unwind the bitbuffer
* to the front of the bytebuffer */
bytebuffer_size = safe_read(gunzip_src_fd, &bytebuffer[4], sz);
if ((int)bytebuffer_size < 1) {
error_msg = "unexpected end of file";
abort_unzip(PASS_STATE_ONLY);
}
if (to_read >= 0) /* unzip only */
to_read -= bytebuffer_size;
bytebuffer_size += 4;
bytebuffer_offset = 4;
}
bitbuffer |= ((unsigned) bytebuffer[bytebuffer_offset]) << *current;
bytebuffer_offset++;
*current += 8;
}
return bitbuffer;
}
2001-04-11 08:41:33 +05:30
/* Given a list of code lengths and a maximum table size, make a set of
* tables to decode that set of codes.
2001-04-11 08:41:33 +05:30
*
* b: code lengths in bits (all assumed <= BMAX)
* n: number of codes (assumed <= N_MAX)
* s: number of simple-valued codes (0..s-1)
* cp_ext->cp,ext: list of base values/extra bits for non-simple codes
2001-04-11 08:41:33 +05:30
* m: maximum lookup bits, returns actual
* result: starting table
*
* On error, returns a value with lowest-bit set on error.
* It can be just the value of 0x1,
* or a valid pointer to a Huffman table, ORed with 0x1 if incompete table
* is given: "fixed inflate" decoder feeds us such data.
2001-04-11 08:41:33 +05:30
*/
#define BAD_HUFT(p) ((uintptr_t)(p) & 1)
#define ERR_RET ((huft_t*)(uintptr_t)1)
static huft_t* huft_build(const unsigned *b, const unsigned n,
const unsigned s, const struct cp_ext *cp_ext,
unsigned *m)
2001-04-11 08:41:33 +05:30
{
unsigned a; /* counter for codes of length k */
unsigned c[BMAX + 1]; /* bit length count table */
unsigned eob_len; /* length of end-of-block code (value 256) */
unsigned f; /* i repeats in table every f entries */
int g; /* maximum code length */
int htl; /* table level */
unsigned i; /* counter, current code */
unsigned j; /* counter */
int k; /* number of bits in current code */
const unsigned *p; /* pointer into c[], b[], or v[] */
huft_t *q; /* points to current table */
huft_t r; /* table entry for structure assignment */
huft_t *u[BMAX]; /* table stack */
unsigned v[N_MAX + 1]; /* values in order of bit length. last v[] is never used */
int ws[BMAX + 1]; /* bits decoded stack */
int w; /* bits decoded */
unsigned x[BMAX + 1]; /* bit offsets, then code stack */
unsigned *xp; /* pointer into x */
int y; /* number of dummy codes added */
unsigned z; /* number of entries in current table */
huft_t *result;
huft_t **t;
/* Length of EOB code, if any */
eob_len = n > 256 ? b[256] : BMAX;
2001-04-11 08:41:33 +05:30
/* Generate counts for each bit length */
memset(c, 0, sizeof(c));
p = b;
2001-04-11 08:41:33 +05:30
i = n;
do {
c[*p]++; /* assume all entries <= BMAX */
p++; /* can't combine with above line (Solaris bug) */
2001-04-11 08:41:33 +05:30
} while (--i);
if (c[0] == n) { /* null input - all zero length codes */
q = xzalloc(3 * sizeof(*q));
//q[0].v.t = NULL;
q[1].e = 99; /* invalid code marker */
q[1].b = 1;
q[2].e = 99; /* invalid code marker */
q[2].b = 1;
*m = 1;
return q + 1;
2001-04-11 08:41:33 +05:30
}
/* Find minimum and maximum length, bound *m by those */
for (j = 1; (j <= BMAX) && (c[j] == 0); j++)
continue;
k = j; /* minimum code length */
for (i = BMAX; (c[i] == 0) && i; i--)
continue;
g = i; /* maximum code length */
*m = (*m < j) ? j : ((*m > i) ? i : *m);
2001-04-11 08:41:33 +05:30
/* Adjust last length count to fill out codes, if needed */
2002-09-25 08:17:48 +05:30
for (y = 1 << j; j < i; j++, y <<= 1) {
y -= c[j];
if (y < 0)
return ERR_RET; /* bad input: more codes than bits */
2002-09-25 08:17:48 +05:30
}
y -= c[i];
if (y < 0)
return ERR_RET;
2001-04-11 08:41:33 +05:30
c[i] += y;
/* Generate starting offsets into the value table for each length */
x[1] = j = 0;
p = c + 1;
xp = x + 2;
while (--i) { /* note that i == g from above */
j += *p++;
*xp++ = j;
2001-04-11 08:41:33 +05:30
}
/* Make a table of values in order of bit lengths.
* To detect bad input, unused v[i]'s are set to invalid value UINT_MAX.
* In particular, last v[i] is never filled and must not be accessed.
*/
memset(v, 0xff, sizeof(v));
p = b;
2001-04-11 08:41:33 +05:30
i = 0;
do {
j = *p++;
if (j != 0) {
2001-04-11 08:41:33 +05:30
v[x[j]++] = i;
2002-09-25 08:17:48 +05:30
}
2001-04-11 08:41:33 +05:30
} while (++i < n);
/* Generate the Huffman codes and for each, make the table entries */
result = ERR_RET;
t = &result;
x[0] = i = 0; /* first Huffman code is zero */
p = v; /* grab values in bit order */
htl = -1; /* no tables yet--level -1 */
w = ws[0] = 0; /* bits decoded */
u[0] = NULL; /* just to keep compilers happy */
q = NULL; /* ditto */
z = 0; /* ditto */
2001-04-11 08:41:33 +05:30
/* go through the bit lengths (k already is bits in shortest code) */
for (; k <= g; k++) {
a = c[k];
while (a--) {
/* here i is the Huffman code of length k bits for value *p */
/* make tables up to required level */
while (k > ws[htl + 1]) {
w = ws[++htl];
/* compute minimum size table less than or equal to *m bits */
z = g - w;
z = z > *m ? *m : z; /* upper limit on table size */
j = k - w;
f = 1 << j;
if (f > a + 1) { /* try a k-w bit table */
/* too few codes for k-w bit table */
f -= a + 1; /* deduct codes from patterns left */
2001-04-11 08:41:33 +05:30
xp = c + k;
while (++j < z) { /* try smaller tables up to z bits */
f <<= 1;
if (f <= *++xp) {
break; /* enough codes to use up j bits */
2002-09-25 08:17:48 +05:30
}
f -= *xp; /* else deduct codes from patterns */
2001-04-11 08:41:33 +05:30
}
}
j = (w + j > eob_len && w < eob_len) ? eob_len - w : j; /* make EOB code end at table */
2002-08-23 00:11:20 +05:30
z = 1 << j; /* table entries for j-bit table */
ws[htl+1] = w + j; /* set bits decoded in stack */
2001-04-11 08:41:33 +05:30
/* allocate and link in new table */
q = xzalloc((z + 1) * sizeof(huft_t));
2002-08-23 00:11:20 +05:30
*t = q + 1; /* link to list for huft_free() */
t = &(q->v.t);
u[htl] = ++q; /* table starts after link */
2001-04-11 08:41:33 +05:30
/* connect to last table, if there is one */
if (htl) {
x[htl] = i; /* save pattern for backing up */
r.b = (unsigned char) (w - ws[htl - 1]); /* bits to dump before this table */
r.e = (unsigned char) (16 + j); /* bits in this table */
r.v.t = q; /* pointer to this table */
j = (i & ((1 << w) - 1)) >> ws[htl - 1];
u[htl - 1][j] = r; /* connect to last table */
2001-04-11 08:41:33 +05:30
}
}
/* set up table entry in r */
r.b = (unsigned char) (k - w);
if (/*p >= v + n || -- redundant, caught by the second check: */
*p == UINT_MAX /* do we access uninited v[i]? (see memset(v))*/
) {
r.e = 99; /* out of values--invalid code */
2002-09-25 08:17:48 +05:30
} else if (*p < s) {
r.e = (unsigned char) (*p < 256 ? 16 : 15); /* 256 is EOB code */
r.v.n = (unsigned short) (*p++); /* simple code is just the value */
2001-04-11 08:41:33 +05:30
} else {
r.e = (unsigned char) cp_ext->ext[*p - s]; /* non-simple--look up in lists */
r.v.n = cp_ext->cp[*p++ - s];
2001-04-11 08:41:33 +05:30
}
/* fill code-like entries with r */
f = 1 << (k - w);
2002-09-25 08:17:48 +05:30
for (j = i >> w; j < z; j += f) {
2001-04-11 08:41:33 +05:30
q[j] = r;
2002-09-25 08:17:48 +05:30
}
2001-04-11 08:41:33 +05:30
/* backwards increment the k-bit code i */
2002-09-25 08:17:48 +05:30
for (j = 1 << (k - 1); i & j; j >>= 1) {
2001-04-11 08:41:33 +05:30
i ^= j;
2002-09-25 08:17:48 +05:30
}
2001-04-11 08:41:33 +05:30
i ^= j;
/* backup over finished tables */
while ((i & ((1 << w) - 1)) != x[htl]) {
w = ws[--htl];
2001-04-11 08:41:33 +05:30
}
}
}
/* return actual size of base table */
*m = ws[1];
if (y != 0 && g != 1) /* we were given an incomplete table */
/* return "result" ORed with 1 */
return (void*)((uintptr_t)result | 1);
return result;
2001-04-11 08:41:33 +05:30
}
2001-04-11 08:41:33 +05:30
/*
* inflate (decompress) the codes in a deflated (compressed) block.
* Return an error code or zero if it all goes ok.
*
* tl, td: literal/length and distance decoder tables
* bl, bd: number of bits decoded by tl[] and td[]
*/
/* called once from inflate_block */
/* map formerly local static variables to globals */
#define ml inflate_codes_ml
#define md inflate_codes_md
#define bb inflate_codes_bb
#define k inflate_codes_k
#define w inflate_codes_w
#define tl inflate_codes_tl
#define td inflate_codes_td
#define bl inflate_codes_bl
#define bd inflate_codes_bd
#define nn inflate_codes_nn
#define dd inflate_codes_dd
static void inflate_codes_setup(STATE_PARAM unsigned my_bl, unsigned my_bd)
2001-04-11 08:41:33 +05:30
{
bl = my_bl;
bd = my_bd;
/* make local copies of globals */
bb = gunzip_bb; /* initialize bit buffer */
k = gunzip_bk;
w = gunzip_outbuf_count; /* initialize gunzip_window position */
/* inflate the coded data */
ml = mask_bits[bl]; /* precompute masks for speed */
md = mask_bits[bd];
}
/* called once from inflate_get_next_window */
static NOINLINE int inflate_codes(STATE_PARAM_ONLY)
{
unsigned e; /* table entry flag/number of extra bits */
huft_t *t; /* pointer to table entry */
if (resume_copy)
goto do_copy;
2002-09-25 08:17:48 +05:30
while (1) { /* do until end of block */
bb = fill_bitbuffer(PASS_STATE bb, &k, bl);
t = tl + ((unsigned) bb & ml);
e = t->e;
if (e > 16)
2002-08-23 00:11:20 +05:30
do {
if (e == 99) {
abort_unzip(PASS_STATE_ONLY);
}
bb >>= t->b;
2002-08-23 00:11:20 +05:30
k -= t->b;
e -= 16;
bb = fill_bitbuffer(PASS_STATE bb, &k, e);
t = t->v.t + ((unsigned) bb & mask_bits[e]);
e = t->e;
} while (e > 16);
bb >>= t->b;
2001-04-11 08:41:33 +05:30
k -= t->b;
2002-08-23 00:11:20 +05:30
if (e == 16) { /* then it's a literal */
2002-09-25 08:17:48 +05:30
gunzip_window[w++] = (unsigned char) t->v.n;
if (w == GUNZIP_WSIZE) {
gunzip_outbuf_count = w;
2002-11-20 12:16:46 +05:30
//flush_gunzip_window();
2001-04-11 08:41:33 +05:30
w = 0;
return 1; // We have a block to read
2001-04-11 08:41:33 +05:30
}
2002-08-23 00:11:20 +05:30
} else { /* it's an EOB or a length */
2001-04-11 08:41:33 +05:30
/* exit if end of block */
if (e == 15) {
break;
}
/* get length of block to copy */
bb = fill_bitbuffer(PASS_STATE bb, &k, e);
nn = t->v.n + ((unsigned) bb & mask_bits[e]);
bb >>= e;
2001-04-11 08:41:33 +05:30
k -= e;
/* decode distance of block to copy */
bb = fill_bitbuffer(PASS_STATE bb, &k, bd);
t = td + ((unsigned) bb & md);
e = t->e;
if (e > 16)
2001-04-11 08:41:33 +05:30
do {
if (e == 99) {
abort_unzip(PASS_STATE_ONLY);
}
bb >>= t->b;
2001-04-11 08:41:33 +05:30
k -= t->b;
e -= 16;
bb = fill_bitbuffer(PASS_STATE bb, &k, e);
t = t->v.t + ((unsigned) bb & mask_bits[e]);
e = t->e;
} while (e > 16);
bb >>= t->b;
2001-04-11 08:41:33 +05:30
k -= t->b;
bb = fill_bitbuffer(PASS_STATE bb, &k, e);
dd = w - t->v.n - ((unsigned) bb & mask_bits[e]);
bb >>= e;
2001-04-11 08:41:33 +05:30
k -= e;
/* do the copy */
do_copy:
do {
/* Was: nn -= (e = (e = GUNZIP_WSIZE - ((dd &= GUNZIP_WSIZE - 1) > w ? dd : w)) > nn ? nn : e); */
/* Who wrote THAT?? rewritten as: */
unsigned delta;
dd &= GUNZIP_WSIZE - 1;
e = GUNZIP_WSIZE - (dd > w ? dd : w);
delta = w > dd ? w - dd : dd - w;
if (e > nn) e = nn;
nn -= e;
/* copy to new buffer to prevent possible overwrite */
if (delta >= e) {
memcpy(gunzip_window + w, gunzip_window + dd, e);
2001-04-11 08:41:33 +05:30
w += e;
dd += e;
2002-09-25 08:17:48 +05:30
} else {
/* do it slow to avoid memcpy() overlap */
/* !NOMEMCPY */
2001-04-11 08:41:33 +05:30
do {
gunzip_window[w++] = gunzip_window[dd++];
2001-04-11 08:41:33 +05:30
} while (--e);
2002-09-25 08:17:48 +05:30
}
if (w == GUNZIP_WSIZE) {
gunzip_outbuf_count = w;
resume_copy = (nn != 0);
2002-11-20 12:16:46 +05:30
//flush_gunzip_window();
2001-04-11 08:41:33 +05:30
w = 0;
return 1;
2001-04-11 08:41:33 +05:30
}
} while (nn);
resume_copy = 0;
2001-04-11 08:41:33 +05:30
}
}
/* restore the globals from the locals */
gunzip_outbuf_count = w; /* restore global gunzip_window pointer */
gunzip_bb = bb; /* restore global bit buffer */
2002-09-25 08:17:48 +05:30
gunzip_bk = k;
2001-04-11 08:41:33 +05:30
2002-11-20 12:16:46 +05:30
/* normally just after call to inflate_codes, but save code by putting it here */
/* free the decoding tables (tl and td), return */
huft_free_all(PASS_STATE_ONLY);
2001-04-11 08:41:33 +05:30
/* done */
return 0;
}
#undef ml
#undef md
#undef bb
#undef k
#undef w
#undef tl
#undef td
#undef bl
#undef bd
#undef nn
#undef dd
/* called once from inflate_block */
static void inflate_stored_setup(STATE_PARAM int my_n, int my_b, int my_k)
{
inflate_stored_n = my_n;
inflate_stored_b = my_b;
inflate_stored_k = my_k;
/* initialize gunzip_window position */
inflate_stored_w = gunzip_outbuf_count;
}
/* called once from inflate_get_next_window */
static int inflate_stored(STATE_PARAM_ONLY)
2002-11-20 12:16:46 +05:30
{
/* read and output the compressed data */
while (inflate_stored_n--) {
inflate_stored_b = fill_bitbuffer(PASS_STATE inflate_stored_b, &inflate_stored_k, 8);
gunzip_window[inflate_stored_w++] = (unsigned char) inflate_stored_b;
if (inflate_stored_w == GUNZIP_WSIZE) {
gunzip_outbuf_count = inflate_stored_w;
2002-11-20 12:16:46 +05:30
//flush_gunzip_window();
inflate_stored_w = 0;
inflate_stored_b >>= 8;
inflate_stored_k -= 8;
return 1; /* We have a block */
2002-11-20 12:16:46 +05:30
}
inflate_stored_b >>= 8;
inflate_stored_k -= 8;
2002-11-20 12:16:46 +05:30
}
/* restore the globals from the locals */
gunzip_outbuf_count = inflate_stored_w; /* restore global gunzip_window pointer */
gunzip_bb = inflate_stored_b; /* restore global bit buffer */
gunzip_bk = inflate_stored_k;
return 0; /* Finished */
2002-11-20 12:16:46 +05:30
}
2001-04-11 08:41:33 +05:30
/*
* decompress an inflated block
* e: last block flag
*
* GLOBAL VARIABLES: bb, kk,
*/
/* Return values: -1 = inflate_stored, -2 = inflate_codes */
/* One callsite in inflate_get_next_window */
static int inflate_block(STATE_PARAM smallint *e)
2001-04-11 08:41:33 +05:30
{
unsigned ll[286 + 30]; /* literal/length and distance code lengths */
unsigned t; /* block type */
unsigned b; /* bit buffer */
unsigned k; /* number of bits in bit buffer */
2001-04-11 08:41:33 +05:30
/* make local bit buffer */
2002-09-25 08:17:48 +05:30
b = gunzip_bb;
k = gunzip_bk;
2001-04-11 08:41:33 +05:30
/* read in last block bit */
b = fill_bitbuffer(PASS_STATE b, &k, 1);
*e = b & 1;
2001-04-11 08:41:33 +05:30
b >>= 1;
k -= 1;
/* read in block type */
b = fill_bitbuffer(PASS_STATE b, &k, 2);
2001-04-11 08:41:33 +05:30
t = (unsigned) b & 3;
b >>= 2;
k -= 2;
/* restore the global bit buffer */
2002-09-25 08:17:48 +05:30
gunzip_bb = b;
gunzip_bk = k;
2001-04-11 08:41:33 +05:30
/* Do we see block type 1 often? Yes!
* TODO: fix performance problem (see below) */
//bb_error_msg("blktype %d", t);
2001-04-11 08:41:33 +05:30
/* inflate that block type */
switch (t) {
case 0: /* Inflate stored */
2002-08-23 00:11:20 +05:30
{
2007-01-06 01:16:04 +05:30
unsigned n; /* number of bytes in block */
unsigned b_stored; /* bit buffer */
unsigned k_stored; /* number of bits in bit buffer */
2002-08-23 00:11:20 +05:30
/* make local copies of globals */
2002-09-25 08:17:48 +05:30
b_stored = gunzip_bb; /* initialize bit buffer */
k_stored = gunzip_bk;
2002-08-23 00:11:20 +05:30
/* go to byte boundary */
n = k_stored & 7;
b_stored >>= n;
k_stored -= n;
/* get the length and its complement */
b_stored = fill_bitbuffer(PASS_STATE b_stored, &k_stored, 16);
2002-08-23 00:11:20 +05:30
n = ((unsigned) b_stored & 0xffff);
b_stored >>= 16;
k_stored -= 16;
2002-09-25 08:17:48 +05:30
b_stored = fill_bitbuffer(PASS_STATE b_stored, &k_stored, 16);
2002-08-23 00:11:20 +05:30
if (n != (unsigned) ((~b_stored) & 0xffff)) {
abort_unzip(PASS_STATE_ONLY); /* error in compressed data */
2002-08-23 00:11:20 +05:30
}
b_stored >>= 16;
k_stored -= 16;
inflate_stored_setup(PASS_STATE n, b_stored, k_stored);
2002-11-20 12:16:46 +05:30
return -1;
2002-08-23 00:11:20 +05:30
}
case 1:
/* Inflate fixed
* decompress an inflated type 1 (fixed Huffman codes) block. We should
* either replace this with a custom decoder, or at least precompute the
* Huffman tables. TODO */
2002-08-23 00:11:20 +05:30
{
int i; /* temporary variable */
unsigned bl; /* lookup bits for tl */
unsigned bd; /* lookup bits for td */
/* gcc 4.2.1 is too dumb to reuse stackspace. Moved up... */
//unsigned ll[288]; /* length list for huft_build */
2002-08-23 00:11:20 +05:30
/* set up literal table */
for (i = 0; i < 144; i++)
ll[i] = 8;
for (; i < 256; i++)
ll[i] = 9;
for (; i < 280; i++)
ll[i] = 7;
for (; i < 288; i++) /* make a complete, but wrong code set */
ll[i] = 8;
2002-08-23 00:11:20 +05:30
bl = 7;
inflate_codes_tl = huft_build(ll, 288, 257, &lit, &bl);
/* ^^^ never returns error here - we use known data */
2001-04-11 08:41:33 +05:30
2002-08-23 00:11:20 +05:30
/* set up distance table */
for (i = 0; i < 30; i++) /* make an incomplete code set */
ll[i] = 5;
2002-08-23 00:11:20 +05:30
bd = 5;
inflate_codes_td = huft_build(ll, 30, 0, &dist, &bd);
/* ^^^ does return error here! (lsb bit is set) - we gave it incomplete code set */
/* clearing error bit: */
inflate_codes_td = (void*)((uintptr_t)inflate_codes_td & ~(uintptr_t)1);
2001-04-11 08:41:33 +05:30
/* set up data for inflate_codes() */
inflate_codes_setup(PASS_STATE bl, bd);
2002-11-20 12:16:46 +05:30
/* huft_free code moved into inflate_codes */
2002-11-20 12:16:46 +05:30
return -2;
2002-08-23 00:11:20 +05:30
}
case 2: /* Inflate dynamic */
2002-08-23 00:11:20 +05:30
{
enum { dbits = 6 }; /* bits in base distance lookup table */
enum { lbits = 9 }; /* bits in base literal/length lookup table */
2002-08-23 00:11:20 +05:30
huft_t *td; /* distance code table */
unsigned i; /* temporary variables */
2007-01-06 01:16:04 +05:30
unsigned j;
unsigned l; /* last length */
unsigned m; /* mask for bit lengths table */
unsigned n; /* number of lengths to get */
unsigned bl; /* lookup bits for tl */
unsigned bd; /* lookup bits for td */
unsigned nb; /* number of bit length codes */
unsigned nl; /* number of literal/length codes */
unsigned nd; /* number of distance codes */
//unsigned ll[286 + 30];/* literal/length and distance code lengths */
unsigned b_dynamic; /* bit buffer */
unsigned k_dynamic; /* number of bits in bit buffer */
2002-08-23 00:11:20 +05:30
/* make local bit buffer */
2002-09-25 08:17:48 +05:30
b_dynamic = gunzip_bb;
k_dynamic = gunzip_bk;
2002-08-23 00:11:20 +05:30
/* read in table lengths */
b_dynamic = fill_bitbuffer(PASS_STATE b_dynamic, &k_dynamic, 5);
2007-01-06 01:16:04 +05:30
nl = 257 + ((unsigned) b_dynamic & 0x1f); /* number of literal/length codes */
2002-09-25 08:17:48 +05:30
2002-08-23 00:11:20 +05:30
b_dynamic >>= 5;
k_dynamic -= 5;
b_dynamic = fill_bitbuffer(PASS_STATE b_dynamic, &k_dynamic, 5);
2007-01-06 01:16:04 +05:30
nd = 1 + ((unsigned) b_dynamic & 0x1f); /* number of distance codes */
2002-09-25 08:17:48 +05:30
2002-08-23 00:11:20 +05:30
b_dynamic >>= 5;
k_dynamic -= 5;
b_dynamic = fill_bitbuffer(PASS_STATE b_dynamic, &k_dynamic, 4);
2007-01-06 01:16:04 +05:30
nb = 4 + ((unsigned) b_dynamic & 0xf); /* number of bit length codes */
2002-09-25 08:17:48 +05:30
2002-08-23 00:11:20 +05:30
b_dynamic >>= 4;
k_dynamic -= 4;
if (nl > 286 || nd > 30) {
abort_unzip(PASS_STATE_ONLY); /* bad lengths */
}
2002-08-23 00:11:20 +05:30
/* read in bit-length-code lengths */
for (j = 0; j < nb; j++) {
b_dynamic = fill_bitbuffer(PASS_STATE b_dynamic, &k_dynamic, 3);
2007-01-06 01:16:04 +05:30
ll[border[j]] = (unsigned) b_dynamic & 7;
2002-08-23 00:11:20 +05:30
b_dynamic >>= 3;
k_dynamic -= 3;
}
for (; j < 19; j++)
2002-08-23 00:11:20 +05:30
ll[border[j]] = 0;
/* build decoding table for trees - single level, 7 bit lookup */
2002-08-23 00:11:20 +05:30
bl = 7;
inflate_codes_tl = huft_build(ll, 19, 19, NULL, &bl);
if (BAD_HUFT(inflate_codes_tl)) {
abort_unzip(PASS_STATE_ONLY); /* incomplete code set */
2002-08-23 00:11:20 +05:30
}
/* read in literal and distance code lengths */
n = nl + nd;
m = mask_bits[bl];
i = l = 0;
2007-01-06 01:16:04 +05:30
while ((unsigned) i < n) {
b_dynamic = fill_bitbuffer(PASS_STATE b_dynamic, &k_dynamic, (unsigned)bl);
td = inflate_codes_tl + ((unsigned) b_dynamic & m);
j = td->b;
2002-08-23 00:11:20 +05:30
b_dynamic >>= j;
k_dynamic -= j;
j = td->v.n;
if (j < 16) { /* length of code in bits (0..15) */
ll[i++] = l = j; /* save last length in l */
} else if (j == 16) { /* repeat last length 3 to 6 times */
b_dynamic = fill_bitbuffer(PASS_STATE b_dynamic, &k_dynamic, 2);
2007-01-06 01:16:04 +05:30
j = 3 + ((unsigned) b_dynamic & 3);
2002-08-23 00:11:20 +05:30
b_dynamic >>= 2;
k_dynamic -= 2;
2007-01-06 01:16:04 +05:30
if ((unsigned) i + j > n) {
abort_unzip(PASS_STATE_ONLY); //return 1;
2002-08-23 00:11:20 +05:30
}
while (j--) {
ll[i++] = l;
}
} else if (j == 17) { /* 3 to 10 zero length codes */
b_dynamic = fill_bitbuffer(PASS_STATE b_dynamic, &k_dynamic, 3);
2007-01-06 01:16:04 +05:30
j = 3 + ((unsigned) b_dynamic & 7);
2001-04-11 08:41:33 +05:30
b_dynamic >>= 3;
k_dynamic -= 3;
2007-01-06 01:16:04 +05:30
if ((unsigned) i + j > n) {
abort_unzip(PASS_STATE_ONLY); //return 1;
2001-04-11 08:41:33 +05:30
}
2002-08-23 00:11:20 +05:30
while (j--) {
ll[i++] = 0;
}
l = 0;
} else { /* j == 18: 11 to 138 zero length codes */
b_dynamic = fill_bitbuffer(PASS_STATE b_dynamic, &k_dynamic, 7);
2007-01-06 01:16:04 +05:30
j = 11 + ((unsigned) b_dynamic & 0x7f);
2002-08-23 00:11:20 +05:30
b_dynamic >>= 7;
k_dynamic -= 7;
2007-01-06 01:16:04 +05:30
if ((unsigned) i + j > n) {
abort_unzip(PASS_STATE_ONLY); //return 1;
2001-04-11 08:41:33 +05:30
}
2002-08-23 00:11:20 +05:30
while (j--) {
ll[i++] = 0;
2001-04-11 08:41:33 +05:30
}
2002-08-23 00:11:20 +05:30
l = 0;
2001-04-11 08:41:33 +05:30
}
2002-08-23 00:11:20 +05:30
}
2001-04-11 08:41:33 +05:30
2002-08-23 00:11:20 +05:30
/* free decoding table for trees */
huft_free(inflate_codes_tl);
2001-04-11 08:41:33 +05:30
2002-08-23 00:11:20 +05:30
/* restore the global bit buffer */
2002-09-25 08:17:48 +05:30
gunzip_bb = b_dynamic;
gunzip_bk = k_dynamic;
2001-04-11 08:41:33 +05:30
2002-08-23 00:11:20 +05:30
/* build the decoding tables for literal/length and distance codes */
bl = lbits;
inflate_codes_tl = huft_build(ll, nl, 257, &lit, &bl);
if (BAD_HUFT(inflate_codes_tl)) {
abort_unzip(PASS_STATE_ONLY);
}
2002-08-23 00:11:20 +05:30
bd = dbits;
inflate_codes_td = huft_build(ll + nl, nd, 0, &dist, &bd);
if (BAD_HUFT(inflate_codes_td)) {
abort_unzip(PASS_STATE_ONLY);
}
2002-08-23 00:11:20 +05:30
/* set up data for inflate_codes() */
inflate_codes_setup(PASS_STATE bl, bd);
2002-08-23 00:11:20 +05:30
2002-11-20 12:16:46 +05:30
/* huft_free code moved into inflate_codes */
2002-11-20 12:16:46 +05:30
return -2;
2002-08-23 00:11:20 +05:30
}
2001-04-11 08:41:33 +05:30
default:
abort_unzip(PASS_STATE_ONLY);
}
}
/* Two callsites, both in inflate_get_next_window */
static void calculate_gunzip_crc(STATE_PARAM_ONLY)
{
gunzip_crc = crc32_block_endian0(gunzip_crc, gunzip_window, gunzip_outbuf_count, gunzip_crc_table);
gunzip_bytes_out += gunzip_outbuf_count;
}
/* One callsite in inflate_unzip_internal */
static int inflate_get_next_window(STATE_PARAM_ONLY)
{
gunzip_outbuf_count = 0;
while (1) {
int ret;
if (need_another_block) {
if (end_reached) {
calculate_gunzip_crc(PASS_STATE_ONLY);
end_reached = 0;
/* NB: need_another_block is still set */
return 0; /* Last block */
}
method = inflate_block(PASS_STATE &end_reached);
need_another_block = 0;
}
switch (method) {
case -1:
ret = inflate_stored(PASS_STATE_ONLY);
break;
case -2:
ret = inflate_codes(PASS_STATE_ONLY);
break;
default: /* cannot happen */
abort_unzip(PASS_STATE_ONLY);
}
if (ret == 1) {
calculate_gunzip_crc(PASS_STATE_ONLY);
return 1; /* more data left */
}
need_another_block = 1; /* end of that block */
2001-04-11 08:41:33 +05:30
}
/* Doesnt get here */
2001-04-11 08:41:33 +05:30
}
/* Called from unpack_gz_stream() and inflate_unzip() */
static IF_DESKTOP(long long) int
inflate_unzip_internal(STATE_PARAM transformer_state_t *xstate)
{
IF_DESKTOP(long long) int n = 0;
ssize_t nwrote;
2001-04-11 08:41:33 +05:30
/* Allocate all global buffers (for DYN_ALLOC option) */
gunzip_window = xmalloc(GUNZIP_WSIZE);
2002-09-25 08:17:48 +05:30
gunzip_outbuf_count = 0;
gunzip_bytes_out = 0;
gunzip_src_fd = xstate->src_fd;
2001-04-11 08:41:33 +05:30
/* (re) initialize state */
method = -1;
need_another_block = 1;
resume_copy = 0;
2002-09-25 08:17:48 +05:30
gunzip_bk = 0;
gunzip_bb = 0;
2001-04-11 08:41:33 +05:30
2002-09-25 08:17:48 +05:30
/* Create the crc table */
gunzip_crc_table = crc32_new_table_le();
gunzip_crc = ~0;
2006-09-17 21:58:10 +05:30
error_msg = "corrupted data";
if (setjmp(error_jmp)) {
/* Error from deep inside zip machinery */
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg(error_msg);
n = -1;
goto ret;
}
while (1) {
int r = inflate_get_next_window(PASS_STATE_ONLY);
nwrote = transformer_write(xstate, gunzip_window, gunzip_outbuf_count);
if (nwrote == (ssize_t)-1) {
n = -1;
goto ret;
}
IF_DESKTOP(n += nwrote;)
if (r == 0) break;
}
2002-09-25 08:17:48 +05:30
/* Store unused bytes in a global buffer so calling applets can access it */
if (gunzip_bk >= 8) {
/* Undo too much lookahead. The next read will be byte aligned
* so we can discard unused bits in the last meaningful byte. */
bytebuffer_offset--;
bytebuffer[bytebuffer_offset] = gunzip_bb & 0xff;
2002-09-25 08:17:48 +05:30
gunzip_bb >>= 8;
gunzip_bk -= 8;
2001-04-11 08:41:33 +05:30
}
ret:
/* Cleanup */
free(gunzip_window);
free(gunzip_crc_table);
return n;
2001-04-11 08:41:33 +05:30
}
/* External entry points */
/* For unzip */
IF_DESKTOP(long long) int FAST_FUNC
inflate_unzip(transformer_state_t *xstate)
{
IF_DESKTOP(long long) int n;
DECLARE_STATE;
ALLOC_STATE;
to_read = xstate->bytes_in;
// bytebuffer_max = 0x8000;
bytebuffer_offset = 4;
bytebuffer = xmalloc(bytebuffer_max);
n = inflate_unzip_internal(PASS_STATE xstate);
free(bytebuffer);
xstate->crc32 = gunzip_crc;
xstate->bytes_out = gunzip_bytes_out;
DEALLOC_STATE;
return n;
}
/* For gunzip */
/* helpers first */
/* Top up the input buffer with at least n bytes. */
static int top_up(STATE_PARAM unsigned n)
{
int count = bytebuffer_size - bytebuffer_offset;
if (count < (int)n) {
memmove(bytebuffer, &bytebuffer[bytebuffer_offset], count);
bytebuffer_offset = 0;
bytebuffer_size = full_read(gunzip_src_fd, &bytebuffer[count], bytebuffer_max - count);
if ((int)bytebuffer_size < 0) {
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg(bb_msg_read_error);
return 0;
}
bytebuffer_size += count;
if (bytebuffer_size < n)
return 0;
}
return 1;
}
static uint16_t buffer_read_le_u16(STATE_PARAM_ONLY)
{
uint16_t res;
#if BB_LITTLE_ENDIAN
move_from_unaligned16(res, &bytebuffer[bytebuffer_offset]);
#else
res = bytebuffer[bytebuffer_offset];
res |= bytebuffer[bytebuffer_offset + 1] << 8;
#endif
bytebuffer_offset += 2;
return res;
}
static uint32_t buffer_read_le_u32(STATE_PARAM_ONLY)
{
uint32_t res;
#if BB_LITTLE_ENDIAN
move_from_unaligned32(res, &bytebuffer[bytebuffer_offset]);
#else
res = bytebuffer[bytebuffer_offset];
res |= bytebuffer[bytebuffer_offset + 1] << 8;
res |= bytebuffer[bytebuffer_offset + 2] << 16;
res |= bytebuffer[bytebuffer_offset + 3] << 24;
#endif
bytebuffer_offset += 4;
return res;
}
static int check_header_gzip(STATE_PARAM transformer_state_t *xstate)
{
union {
unsigned char raw[8];
struct {
uint8_t gz_method;
uint8_t flags;
uint32_t mtime;
uint8_t xtra_flags_UNUSED;
uint8_t os_flags_UNUSED;
} PACKED formatted;
} header;
BUILD_BUG_ON(sizeof(header) != 8);
/*
* Rewind bytebuffer. We use the beginning because the header has 8
* bytes, leaving enough for unwinding afterwards.
*/
bytebuffer_size -= bytebuffer_offset;
memmove(bytebuffer, &bytebuffer[bytebuffer_offset], bytebuffer_size);
bytebuffer_offset = 0;
if (!top_up(PASS_STATE 8))
return 0;
memcpy(header.raw, &bytebuffer[bytebuffer_offset], 8);
bytebuffer_offset += 8;
/* Check the compression method */
if (header.formatted.gz_method != 8) {
return 0;
}
if (header.formatted.flags & 0x04) {
/* bit 2 set: extra field present */
unsigned extra_short;
if (!top_up(PASS_STATE 2))
return 0;
extra_short = buffer_read_le_u16(PASS_STATE_ONLY);
if (!top_up(PASS_STATE extra_short))
return 0;
/* Ignore extra field */
bytebuffer_offset += extra_short;
}
/* Discard original name and file comment if any */
/* bit 3 set: original file name present */
/* bit 4 set: file comment present */
if (header.formatted.flags & 0x18) {
while (1) {
do {
if (!top_up(PASS_STATE 1))
return 0;
} while (bytebuffer[bytebuffer_offset++] != 0);
if ((header.formatted.flags & 0x18) != 0x18)
break;
header.formatted.flags &= ~0x18;
}
}
xstate->mtime = SWAP_LE32(header.formatted.mtime);
/* Read the header checksum */
if (header.formatted.flags & 0x02) {
if (!top_up(PASS_STATE 2))
return 0;
bytebuffer_offset += 2;
}
return 1;
}
IF_DESKTOP(long long) int FAST_FUNC
unpack_gz_stream(transformer_state_t *xstate)
{
uint32_t v32;
IF_DESKTOP(long long) int total, n;
DECLARE_STATE;
#if !ENABLE_FEATURE_SEAMLESS_Z
if (check_signature16(xstate, GZIP_MAGIC))
return -1;
#else
if (!xstate->signature_skipped) {
uint16_t magic2;
if (full_read(xstate->src_fd, &magic2, 2) != 2) {
bad_magic:
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg("invalid magic");
return -1;
}
if (magic2 == COMPRESS_MAGIC) {
xstate->signature_skipped = 2;
return unpack_Z_stream(xstate);
}
if (magic2 != GZIP_MAGIC)
goto bad_magic;
}
#endif
total = 0;
ALLOC_STATE;
to_read = -1;
// bytebuffer_max = 0x8000;
bytebuffer = xmalloc(bytebuffer_max);
gunzip_src_fd = xstate->src_fd;
again:
if (!check_header_gzip(PASS_STATE xstate)) {
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg("corrupted data");
total = -1;
goto ret;
}
n = inflate_unzip_internal(PASS_STATE xstate);
if (n < 0) {
total = -1;
goto ret;
}
total += n;
if (!top_up(PASS_STATE 8)) {
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg("corrupted data");
total = -1;
goto ret;
}
/* Validate decompression - crc */
v32 = buffer_read_le_u32(PASS_STATE_ONLY);
if ((~gunzip_crc) != v32) {
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg("crc error");
total = -1;
goto ret;
}
/* Validate decompression - size */
v32 = buffer_read_le_u32(PASS_STATE_ONLY);
if ((uint32_t)gunzip_bytes_out != v32) {
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg("incorrect length");
total = -1;
}
if (!top_up(PASS_STATE 2))
goto ret; /* EOF */
if (bytebuffer[bytebuffer_offset] == 0x1f
&& bytebuffer[bytebuffer_offset + 1] == 0x8b
) {
bytebuffer_offset += 2;
goto again;
}
/* GNU gzip says: */
/*bb_error_msg("decompression OK, trailing garbage ignored");*/
ret:
free(bytebuffer);
DEALLOC_STATE;
return total;
}