busybox/networking/tftp.c

961 lines
27 KiB
C
Raw Normal View History

/* vi: set sw=4 ts=4: */
/*
* A simple tftp client/server for busybox.
* Tries to follow RFC1350.
* Only "octet" mode supported.
* Optional blocksize negotiation (RFC2347 + RFC2348)
*
* Copyright (C) 2001 Magnus Damm <damm@opensource.se>
*
* Parts of the code based on:
*
* atftp: Copyright (C) 2000 Jean-Pierre Lefebvre <helix@step.polymtl.ca>
* and Remi Lefebvre <remi@debian.org>
*
* utftp: Copyright (C) 1999 Uwe Ohse <uwe@ohse.de>
*
2008-03-18 05:41:46 +05:30
* tftpd added by Denys Vlasenko & Vladimir Dronnikov
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/
//config:config TFTP
//config: bool "tftp (11 kb)"
//config: default y
//config: help
//config: Trivial File Transfer Protocol client. TFTP is usually used
//config: for simple, small transfers such as a root image
//config: for a network-enabled bootloader.
//config:
//config:config FEATURE_TFTP_PROGRESS_BAR
//config: bool "Enable progress bar"
//config: default y
//config: depends on TFTP
//config:
//config:config TFTPD
//config: bool "tftpd (10 kb)"
//config: default y
//config: help
//config: Trivial File Transfer Protocol server.
//config: It expects that stdin is a datagram socket and a packet
//config: is already pending on it. It will exit after one transfer.
//config: In other words: it should be run from inetd in nowait mode,
//config: or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
//config:
//config:config FEATURE_TFTP_GET
//config: bool "Enable 'tftp get' and/or tftpd upload code"
//config: default y
//config: depends on TFTP || TFTPD
//config: help
//config: Add support for the GET command within the TFTP client. This allows
//config: a client to retrieve a file from a TFTP server.
//config: Also enable upload support in tftpd, if tftpd is selected.
//config:
//config: Note: this option does _not_ make tftpd capable of download
//config: (the usual operation people need from it)!
//config:
//config:config FEATURE_TFTP_PUT
//config: bool "Enable 'tftp put' and/or tftpd download code"
//config: default y
//config: depends on TFTP || TFTPD
//config: help
//config: Add support for the PUT command within the TFTP client. This allows
//config: a client to transfer a file to a TFTP server.
//config: Also enable download support in tftpd, if tftpd is selected.
//config:
//config:config FEATURE_TFTP_BLOCKSIZE
//config: bool "Enable 'blksize' and 'tsize' protocol options"
//config: default y
//config: depends on TFTP || TFTPD
//config: help
//config: Allow tftp to specify block size, and tftpd to understand
//config: "blksize" and "tsize" options.
//config:
//config:config TFTP_DEBUG
//config: bool "Enable debug"
//config: default n
//config: depends on TFTP || TFTPD
//config: help
//config: Make tftp[d] print debugging messages on stderr.
//config: This is useful if you are diagnosing a bug in tftp[d].
//applet:#if ENABLE_FEATURE_TFTP_GET || ENABLE_FEATURE_TFTP_PUT
//applet:IF_TFTP(APPLET(tftp, BB_DIR_USR_BIN, BB_SUID_DROP))
//applet:IF_TFTPD(APPLET(tftpd, BB_DIR_USR_SBIN, BB_SUID_DROP))
//applet:#endif
//kbuild:lib-$(CONFIG_TFTP) += tftp.o
//kbuild:lib-$(CONFIG_TFTPD) += tftp.o
//usage:#define tftp_trivial_usage
//usage: "[OPTIONS] HOST [PORT]"
//usage:#define tftp_full_usage "\n\n"
//usage: "Transfer a file from/to tftp server\n"
//usage: "\n -l FILE Local FILE"
//usage: "\n -r FILE Remote FILE"
//usage: IF_FEATURE_TFTP_GET(
//usage: "\n -g Get file"
//usage: )
//usage: IF_FEATURE_TFTP_PUT(
//usage: "\n -p Put file"
//usage: )
//usage: IF_FEATURE_TFTP_BLOCKSIZE(
//usage: "\n -b SIZE Transfer blocks of SIZE octets"
//usage: )
//usage:
//usage:#define tftpd_trivial_usage
//usage: "[-cr] [-u USER] [DIR]"
//usage:#define tftpd_full_usage "\n\n"
//usage: "Transfer a file on tftp client's request\n"
//usage: "\n"
//usage: "tftpd should be used as an inetd service.\n"
//usage: "tftpd's line for inetd.conf:\n"
//usage: " 69 dgram udp nowait root tftpd tftpd -l /files/to/serve\n"
//usage: "It also can be ran from udpsvd:\n"
//usage: " udpsvd -vE 0.0.0.0 69 tftpd /files/to/serve\n"
//usage: "\n -r Prohibit upload"
//usage: "\n -c Allow file creation via upload"
//usage: "\n -u Access files as USER"
//usage: "\n -l Log to syslog (inetd mode requires this)"
#include "libbb.h"
#include "common_bufsiz.h"
#include <syslog.h>
#if ENABLE_FEATURE_TFTP_GET || ENABLE_FEATURE_TFTP_PUT
#define TFTP_BLKSIZE_DEFAULT 512 /* according to RFC 1350, don't change */
#define TFTP_BLKSIZE_DEFAULT_STR "512"
/* Was 50 ms but users asked to bump it up a bit */
#define TFTP_TIMEOUT_MS 100
#define TFTP_MAXTIMEOUT_MS 2000
#define TFTP_NUM_RETRIES 12 /* number of backed-off retries */
/* opcodes we support */
#define TFTP_RRQ 1
#define TFTP_WRQ 2
#define TFTP_DATA 3
#define TFTP_ACK 4
#define TFTP_ERROR 5
#define TFTP_OACK 6
/* error codes sent over network (we use only 0, 1, 3 and 8) */
/* generic (error message is included in the packet) */
#define ERR_UNSPEC 0
#define ERR_NOFILE 1
#define ERR_ACCESS 2
/* disk full or allocation exceeded */
#define ERR_WRITE 3
#define ERR_OP 4
#define ERR_BAD_ID 5
#define ERR_EXIST 6
#define ERR_BAD_USER 7
#define ERR_BAD_OPT 8
/* masks coming from getopt32 */
enum {
TFTP_OPT_GET = (1 << 0),
TFTP_OPT_PUT = (1 << 1),
/* pseudo option: if set, it's tftpd */
TFTPD_OPT = (1 << 7) * ENABLE_TFTPD,
TFTPD_OPT_r = (1 << 8) * ENABLE_TFTPD,
TFTPD_OPT_c = (1 << 9) * ENABLE_TFTPD,
TFTPD_OPT_u = (1 << 10) * ENABLE_TFTPD,
TFTPD_OPT_l = (1 << 11) * ENABLE_TFTPD,
};
#if ENABLE_FEATURE_TFTP_GET && !ENABLE_FEATURE_TFTP_PUT
#define IF_GETPUT(...)
#define CMD_GET(cmd) 1
#define CMD_PUT(cmd) 0
#elif !ENABLE_FEATURE_TFTP_GET && ENABLE_FEATURE_TFTP_PUT
#define IF_GETPUT(...)
#define CMD_GET(cmd) 0
#define CMD_PUT(cmd) 1
#else
#define IF_GETPUT(...) __VA_ARGS__
#define CMD_GET(cmd) ((cmd) & TFTP_OPT_GET)
#define CMD_PUT(cmd) ((cmd) & TFTP_OPT_PUT)
#endif
/* NB: in the code below
* CMD_GET(cmd) and CMD_PUT(cmd) are mutually exclusive
*/
struct globals {
/* u16 TFTP_ERROR; u16 reason; both network-endian, then error text: */
uint8_t error_pkt[4 + 32];
struct passwd *pw;
/* Used in tftpd_main() for initial packet */
/* Some HP PA-RISC firmware always sends fixed 516-byte requests */
char block_buf[516];
char block_buf_tail[1];
#if ENABLE_FEATURE_TFTP_PROGRESS_BAR
off_t pos;
off_t size;
const char *file;
bb_progress_t pmt;
#endif
} FIX_ALIASING;
#define G (*(struct globals*)bb_common_bufsiz1)
#define INIT_G() do { \
setup_common_bufsiz(); \
BUILD_BUG_ON(sizeof(G) > COMMON_BUFSIZE); \
} while (0)
#define G_error_pkt_reason (G.error_pkt[3])
#define G_error_pkt_str ((char*)(G.error_pkt + 4))
#if ENABLE_FEATURE_TFTP_PROGRESS_BAR && ENABLE_FEATURE_TFTP_BLOCKSIZE
static void tftp_progress_update(void)
{
bb_progress_update(&G.pmt, 0, G.pos, G.size);
}
static void tftp_progress_init(void)
{
bb_progress_init(&G.pmt, G.file);
tftp_progress_update();
}
static void tftp_progress_done(void)
{
if (is_bb_progress_inited(&G.pmt)) {
tftp_progress_update();
bb_putchar_stderr('\n');
bb_progress_free(&G.pmt);
}
}
#else
# define tftp_progress_update() ((void)0)
# define tftp_progress_init() ((void)0)
# define tftp_progress_done() ((void)0)
#endif
2001-08-20 23:17:49 +05:30
#if ENABLE_FEATURE_TFTP_BLOCKSIZE
static int tftp_blksize_check(const char *blksize_str, int maxsize)
{
/* Check if the blksize is valid:
* RFC2348 says between 8 and 65464,
* but our implementation makes it impossible
* to use blksizes smaller than 22 octets. */
unsigned blksize = bb_strtou(blksize_str, NULL, 10);
if (errno
|| (blksize < 24) || (blksize > maxsize)
) {
bb_error_msg("bad blocksize '%s'", blksize_str);
return -1;
}
# if ENABLE_TFTP_DEBUG
Optionally re-introduce bb_info_msg() Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was eliminated and calls to it changed to be bb_error_msg(). The downside of this is that daemons now log all messages to syslog at the LOG_ERR level which makes it hard to filter errors from informational messages. This change optionally re-introduces bb_info_msg(), controlled by a new option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that were removed (only in applets that set logmode to LOGMODE_SYSLOG or LOGMODE_BOTH), and also changes informational messages in ifplugd and ntpd. The code size change of this is as follows (using 'defconfig' on x86_64 with gcc 7.3.0-27ubuntu1~18.04) function old new delta bb_info_msg - 182 +182 bb_vinfo_msg - 27 +27 static.log7 194 198 +4 log8 190 191 +1 log5 190 191 +1 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes If you don't care about everything being logged at LOG_ERR level then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller: function old new delta static.log7 194 200 +6 log8 190 193 +3 log5 190 193 +3 syslog_level 1 - -1 bb_verror_msg 583 581 -2 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-12 22:31:51 +05:30
bb_info_msg("using blksize %u", blksize);
# endif
return blksize;
}
static char *tftp_get_option(const char *option, char *buf, int len)
{
2006-01-25 05:38:53 +05:30
int opt_val = 0;
int opt_found = 0;
int k;
/* buf points to:
* "opt_name<NUL>opt_val<NUL>opt_name2<NUL>opt_val2<NUL>..." */
while (len > 0) {
/* Make sure options are terminated correctly */
for (k = 0; k < len; k++) {
if (buf[k] == '\0') {
goto nul_found;
}
}
return NULL;
nul_found:
if (opt_val == 0) { /* it's "name" part */
if (strcasecmp(buf, option) == 0) {
opt_found = 1;
}
} else if (opt_found) {
return buf;
}
k++;
buf += k;
len -= k;
opt_val ^= 1;
}
return NULL;
}
#endif
static int tftp_protocol(
/* NULL if tftp, !NULL if tftpd: */
len_and_sockaddr *our_lsa,
2007-02-08 04:50:32 +05:30
len_and_sockaddr *peer_lsa,
const char *local_file
IF_TFTP(, const char *remote_file)
#if !ENABLE_TFTP
# define remote_file NULL
#endif
/* 1 for tftp; 1/0 for tftpd depending whether client asked about it: */
IF_FEATURE_TFTP_BLOCKSIZE(, int want_transfer_size)
IF_FEATURE_TFTP_BLOCKSIZE(, int blksize))
{
#if !ENABLE_FEATURE_TFTP_BLOCKSIZE
enum { blksize = TFTP_BLKSIZE_DEFAULT };
#endif
struct pollfd pfd[1];
#define socket_fd (pfd[0].fd)
2006-06-10 20:02:56 +05:30
int len;
int send_len;
IF_FEATURE_TFTP_BLOCKSIZE(smallint expect_OACK = 0;)
smallint finished = 0;
uint16_t opcode;
uint16_t block_nr;
uint16_t recv_blk;
int open_mode, local_fd;
int retries, waittime_ms;
int io_bufsize = blksize + 4;
char *cp;
/* Can't use RESERVE_CONFIG_BUFFER here since the allocation
* size varies meaning BUFFERS_GO_ON_STACK would fail.
*
* We must keep the transmit and receive buffers separate
* in case we rcv a garbage pkt - we need to rexmit the last pkt.
*/
char *xbuf = xmalloc(io_bufsize);
char *rbuf = xmalloc(io_bufsize);
socket_fd = xsocket(peer_lsa->u.sa.sa_family, SOCK_DGRAM, 0);
setsockopt_reuseaddr(socket_fd);
if (!ENABLE_TFTP || our_lsa) { /* tftpd */
/* Create a socket which is:
* 1. bound to IP:port peer sent 1st datagram to,
* 2. connected to peer's IP:port
* This way we will answer from the IP:port peer
* expects, will not get any other packets on
* the socket, and also plain read/write will work. */
xbind(socket_fd, &our_lsa->u.sa, our_lsa->len);
xconnect(socket_fd, &peer_lsa->u.sa, peer_lsa->len);
/* Is there an error already? Send pkt and bail out */
if (G_error_pkt_reason || G_error_pkt_str[0])
goto send_err_pkt;
if (G.pw) {
change_identity(G.pw); /* initgroups, setgid, setuid */
}
}
/* Prepare open mode */
if (CMD_PUT(option_mask32)) {
open_mode = O_RDONLY;
} else {
open_mode = O_WRONLY | O_TRUNC | O_CREAT;
#if ENABLE_TFTPD
if ((option_mask32 & (TFTPD_OPT+TFTPD_OPT_c)) == TFTPD_OPT) {
/* tftpd without -c */
open_mode = O_WRONLY | O_TRUNC;
}
#endif
}
/* Examples of network traffic.
* Note two cases when ACKs with block# of 0 are sent.
*
* Download without options:
* tftp -> "\0\1FILENAME\0octet\0"
* "\0\3\0\1FILEDATA..." <- tftpd
* tftp -> "\0\4\0\1"
* ...
* Download with option of blksize 16384:
* tftp -> "\0\1FILENAME\0octet\0blksize\00016384\0"
* "\0\6blksize\00016384\0" <- tftpd
* tftp -> "\0\4\0\0"
* "\0\3\0\1FILEDATA..." <- tftpd
* tftp -> "\0\4\0\1"
* ...
* Upload without options:
* tftp -> "\0\2FILENAME\0octet\0"
* "\0\4\0\0" <- tftpd
* tftp -> "\0\3\0\1FILEDATA..."
* "\0\4\0\1" <- tftpd
* ...
* Upload with option of blksize 16384:
* tftp -> "\0\2FILENAME\0octet\0blksize\00016384\0"
* "\0\6blksize\00016384\0" <- tftpd
* tftp -> "\0\3\0\1FILEDATA..."
* "\0\4\0\1" <- tftpd
* ...
*/
block_nr = 1;
cp = xbuf + 2;
if (!ENABLE_TFTP || our_lsa) { /* tftpd */
/* Open file (must be after changing user) */
local_fd = open(local_file, open_mode, 0666);
if (local_fd < 0) {
G_error_pkt_reason = ERR_NOFILE;
strcpy(G_error_pkt_str, "can't open file");
goto send_err_pkt;
}
2008-06-16 13:02:40 +05:30
/* gcc 4.3.1 would NOT optimize it out as it should! */
#if ENABLE_FEATURE_TFTP_BLOCKSIZE
if (blksize != TFTP_BLKSIZE_DEFAULT || want_transfer_size) {
/* Create and send OACK packet. */
/* For the download case, block_nr is still 1 -
* we expect 1st ACK from peer to be for (block_nr-1),
* that is, for "block 0" which is our OACK pkt */
opcode = TFTP_OACK;
goto add_blksize_opt;
}
2008-06-16 13:02:40 +05:30
#endif
if (CMD_GET(option_mask32)) {
/* It's upload and we don't send OACK.
* We must ACK 1st packet (with filename)
* as if it is "block 0" */
block_nr = 0;
}
} else { /* tftp */
/* Open file (must be after changing user) */
local_fd = CMD_GET(option_mask32) ? STDOUT_FILENO : STDIN_FILENO;
if (NOT_LONE_DASH(local_file))
local_fd = xopen(local_file, open_mode);
/* Removing #if, or using if() statement instead of #if may lead to
* "warning: null argument where non-null required": */
#if ENABLE_TFTP
/* tftp */
/* We can't (and don't really need to) bind the socket:
* we don't know from which local IP datagrams will be sent,
* but kernel will pick the same IP every time (unless routing
* table is changed), thus peer will see dgrams consistently
* coming from the same IP.
* We would like to connect the socket, but since peer's
* UDP code can be less perfect than ours, _peer's_ IP:port
* in replies may differ from IP:port we used to send
* our first packet. We can connect() only when we get
* first reply. */
/* build opcode */
opcode = TFTP_WRQ;
if (CMD_GET(option_mask32)) {
opcode = TFTP_RRQ;
}
/* add filename and mode */
/* fill in packet if the filename fits into xbuf */
len = strlen(remote_file) + 1;
if (2 + len + sizeof("octet") >= io_bufsize) {
bb_error_msg("remote filename is too long");
goto ret;
}
strcpy(cp, remote_file);
cp += len;
/* add "mode" part of the packet */
strcpy(cp, "octet");
cp += sizeof("octet");
# if ENABLE_FEATURE_TFTP_BLOCKSIZE
if (blksize == TFTP_BLKSIZE_DEFAULT && !want_transfer_size)
goto send_pkt;
/* Need to add option to pkt */
if ((&xbuf[io_bufsize - 1] - cp) < sizeof("blksize NNNNN tsize ") + sizeof(off_t)*3) {
bb_error_msg("remote filename is too long");
goto ret;
}
expect_OACK = 1;
# endif
#endif /* ENABLE_TFTP */
2008-06-16 13:02:40 +05:30
#if ENABLE_FEATURE_TFTP_BLOCKSIZE
add_blksize_opt:
if (blksize != TFTP_BLKSIZE_DEFAULT) {
/* add "blksize", <nul>, blksize, <nul> */
strcpy(cp, "blksize");
cp += sizeof("blksize");
cp += snprintf(cp, 6, "%d", blksize) + 1;
}
if (want_transfer_size) {
/* add "tsize", <nul>, size, <nul> (see RFC2349) */
/* if tftp and downloading, we send "0" (since we opened local_fd with O_TRUNC)
* and this makes server to send "tsize" option with the size */
/* if tftp and uploading, we send file size (maybe dont, to not confuse old servers???) */
/* if tftpd and downloading, we are answering to client's request */
/* if tftpd and uploading: !want_transfer_size, this code is not executed */
struct stat st;
strcpy(cp, "tsize");
cp += sizeof("tsize");
st.st_size = 0;
fstat(local_fd, &st);
cp += sprintf(cp, "%"OFF_FMT"u", (off_t)st.st_size) + 1;
# if ENABLE_FEATURE_TFTP_PROGRESS_BAR
/* Save for progress bar. If 0 (tftp downloading),
* we look at server's reply later */
G.size = st.st_size;
if (remote_file && st.st_size)
tftp_progress_init();
# endif
}
2008-06-16 13:02:40 +05:30
#endif
/* First packet is built, so skip packet generation */
goto send_pkt;
}
/* Using mostly goto's - continue/break will be less clear
* in where we actually jump to */
while (1) {
/* Build ACK or DATA */
cp = xbuf + 2;
*((uint16_t*)cp) = htons(block_nr);
cp += 2;
block_nr++;
opcode = TFTP_ACK;
if (CMD_PUT(option_mask32)) {
opcode = TFTP_DATA;
len = full_read(local_fd, cp, blksize);
if (len < 0) {
goto send_read_err_pkt;
}
if (len != blksize) {
finished = 1;
}
cp += len;
IF_FEATURE_TFTP_PROGRESS_BAR(G.pos += len;)
}
send_pkt:
/* Send packet */
*((uint16_t*)xbuf) = htons(opcode); /* fill in opcode part */
send_len = cp - xbuf;
/* NB: send_len value is preserved in code below
* for potential resend */
retries = TFTP_NUM_RETRIES; /* re-initialize */
waittime_ms = TFTP_TIMEOUT_MS;
send_again:
#if ENABLE_TFTP_DEBUG
fprintf(stderr, "sending %u bytes\n", send_len);
for (cp = xbuf; cp < &xbuf[send_len]; cp++)
fprintf(stderr, "%02x ", (unsigned char) *cp);
fprintf(stderr, "\n");
2001-08-20 23:17:49 +05:30
#endif
xsendto(socket_fd, xbuf, send_len, &peer_lsa->u.sa, peer_lsa->len);
#if ENABLE_FEATURE_TFTP_PROGRESS_BAR
if (is_bb_progress_inited(&G.pmt))
tftp_progress_update();
#endif
/* Was it final ACK? then exit */
if (finished && (opcode == TFTP_ACK))
goto ret;
recv_again:
/* Receive packet */
/*pfd[0].fd = socket_fd;*/
pfd[0].events = POLLIN;
switch (safe_poll(pfd, 1, waittime_ms)) {
default:
/*bb_perror_msg("poll"); - done in safe_poll */
goto ret;
case 0:
retries--;
if (retries == 0) {
tftp_progress_done();
bb_error_msg("timeout");
goto ret; /* no err packet sent */
}
/* exponential backoff with limit */
waittime_ms += waittime_ms/2;
if (waittime_ms > TFTP_MAXTIMEOUT_MS) {
waittime_ms = TFTP_MAXTIMEOUT_MS;
}
goto send_again; /* resend last sent pkt */
case 1:
if (!our_lsa) {
/* tftp (not tftpd!) receiving 1st packet */
our_lsa = ((void*)(ptrdiff_t)-1); /* not NULL */
len = recvfrom(socket_fd, rbuf, io_bufsize, 0,
&peer_lsa->u.sa, &peer_lsa->len);
/* Our first dgram went to port 69
* but reply may come from different one.
* Remember and use this new port (and IP) */
if (len >= 0)
xconnect(socket_fd, &peer_lsa->u.sa, peer_lsa->len);
} else {
/* tftpd, or not the very first packet:
* socket is connect()ed, can just read from it. */
/* Don't full_read()!
* This is not TCP, one read == one pkt! */
len = safe_read(socket_fd, rbuf, io_bufsize);
}
if (len < 0) {
goto send_read_err_pkt;
}
if (len < 4) { /* too small? */
2008-03-18 05:41:46 +05:30
goto recv_again;
}
}
/* Process recv'ed packet */
opcode = ntohs( ((uint16_t*)rbuf)[0] );
recv_blk = ntohs( ((uint16_t*)rbuf)[1] );
#if ENABLE_TFTP_DEBUG
fprintf(stderr, "received %d bytes: %04x %04x\n", len, opcode, recv_blk);
2001-08-20 23:17:49 +05:30
#endif
if (opcode == TFTP_ERROR) {
static const char errcode_str[] ALIGN1 =
"\0"
"file not found\0"
"access violation\0"
"disk full\0"
"bad operation\0"
"unknown transfer id\0"
"file already exists\0"
"no such user\0"
"bad option";
const char *msg = "";
if (len > 4 && rbuf[4] != '\0') {
msg = &rbuf[4];
rbuf[io_bufsize - 1] = '\0'; /* paranoia */
} else if (recv_blk <= 8) {
msg = nth_string(errcode_str, recv_blk);
}
bb_error_msg("server error: (%u) %s", recv_blk, msg);
goto ret;
}
#if ENABLE_FEATURE_TFTP_BLOCKSIZE
if (expect_OACK) {
expect_OACK = 0;
if (opcode == TFTP_OACK) {
/* server seems to support options */
char *res;
res = tftp_get_option("blksize", &rbuf[2], len - 2);
if (res) {
blksize = tftp_blksize_check(res, blksize);
if (blksize < 0) {
G_error_pkt_reason = ERR_BAD_OPT;
goto send_err_pkt;
}
io_bufsize = blksize + 4;
}
# if ENABLE_FEATURE_TFTP_PROGRESS_BAR
if (remote_file && G.size == 0) { /* if we don't know it yet */
res = tftp_get_option("tsize", &rbuf[2], len - 2);
if (res) {
G.size = bb_strtoull(res, NULL, 10);
if (G.size)
tftp_progress_init();
}
}
# endif
if (CMD_GET(option_mask32)) {
/* We'll send ACK for OACK,
* such ACK has "block no" of 0 */
block_nr = 0;
}
continue;
}
/* rfc2347:
* "An option not acknowledged by the server
* must be ignored by the client and server
* as if it were never requested." */
if (blksize != TFTP_BLKSIZE_DEFAULT)
bb_error_msg("falling back to blocksize "TFTP_BLKSIZE_DEFAULT_STR);
blksize = TFTP_BLKSIZE_DEFAULT;
io_bufsize = TFTP_BLKSIZE_DEFAULT + 4;
}
#endif
/* block_nr is already advanced to next block# we expect
* to get / block# we are about to send next time */
if (CMD_GET(option_mask32) && (opcode == TFTP_DATA)) {
if (recv_blk == block_nr) {
int sz = full_write(local_fd, &rbuf[4], len - 4);
if (sz != len - 4) {
strcpy(G_error_pkt_str, bb_msg_write_error);
G_error_pkt_reason = ERR_WRITE;
goto send_err_pkt;
}
if (sz != blksize) {
finished = 1;
}
IF_FEATURE_TFTP_PROGRESS_BAR(G.pos += sz;)
continue; /* send ACK */
}
/* Disabled to cope with servers with Sorcerer's Apprentice Syndrome */
#if 0
if (recv_blk == (block_nr - 1)) {
/* Server lost our TFTP_ACK. Resend it */
block_nr = recv_blk;
continue;
2007-05-30 05:59:55 +05:30
}
#endif
}
if (CMD_PUT(option_mask32) && (opcode == TFTP_ACK)) {
/* did peer ACK our last DATA pkt? */
if (recv_blk == (uint16_t) (block_nr - 1)) {
if (finished)
goto ret;
continue; /* send next block */
}
}
/* Awww... recv'd packet is not recognized! */
goto recv_again;
/* why recv_again? - rfc1123 says:
* "The sender (i.e., the side originating the DATA packets)
* must never resend the current DATA packet on receipt
* of a duplicate ACK".
* DATA pkts are resent ONLY on timeout.
* Thus "goto send_again" will ba a bad mistake above.
* See:
* http://en.wikipedia.org/wiki/Sorcerer's_Apprentice_Syndrome
*/
} /* end of "while (1)" */
ret:
if (ENABLE_FEATURE_CLEAN_UP) {
close(local_fd);
close(socket_fd);
free(xbuf);
free(rbuf);
}
return finished == 0; /* returns 1 on failure */
send_read_err_pkt:
strcpy(G_error_pkt_str, bb_msg_read_error);
send_err_pkt:
if (G_error_pkt_str[0])
bb_error_msg("%s", G_error_pkt_str);
G.error_pkt[1] = TFTP_ERROR;
xsendto(socket_fd, G.error_pkt, 4 + 1 + strlen(G_error_pkt_str),
&peer_lsa->u.sa, peer_lsa->len);
return EXIT_FAILURE;
#undef remote_file
}
#if ENABLE_TFTP
int tftp_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
2008-07-05 14:48:54 +05:30
int tftp_main(int argc UNUSED_PARAM, char **argv)
{
len_and_sockaddr *peer_lsa;
const char *local_file = NULL;
const char *remote_file = NULL;
# if ENABLE_FEATURE_TFTP_BLOCKSIZE
const char *blksize_str = TFTP_BLKSIZE_DEFAULT_STR;
int blksize;
# endif
int result;
int port;
IF_GETPUT(int opt;)
INIT_G();
getopt32: remove opt_complementary function old new delta vgetopt32 1318 1392 +74 runsvdir_main 703 713 +10 bb_make_directory 423 425 +2 collect_cpu 546 545 -1 opt_chars 3 - -3 opt_complementary 4 - -4 tftpd_main 567 562 -5 ntp_init 476 471 -5 zcip_main 1266 1256 -10 xxd_main 428 418 -10 whois_main 140 130 -10 who_main 463 453 -10 which_main 212 202 -10 wget_main 2535 2525 -10 watchdog_main 291 281 -10 watch_main 222 212 -10 vlock_main 399 389 -10 uuencode_main 332 322 -10 uudecode_main 316 306 -10 unlink_main 45 35 -10 udhcpd_main 1482 1472 -10 udhcpc_main 2762 2752 -10 tune2fs_main 290 280 -10 tunctl_main 366 356 -10 truncate_main 218 208 -10 tr_main 518 508 -10 time_main 1134 1124 -10 tftp_main 286 276 -10 telnetd_main 1873 1863 -10 tcpudpsvd_main 1785 1775 -10 taskset_main 521 511 -10 tar_main 1009 999 -10 tail_main 1644 1634 -10 syslogd_main 1967 1957 -10 switch_root_main 368 358 -10 svlogd_main 1454 1444 -10 sv 1296 1286 -10 stat_main 104 94 -10 start_stop_daemon_main 1028 1018 -10 split_main 542 532 -10 sort_main 796 786 -10 slattach_main 624 614 -10 shuf_main 504 494 -10 setsid_main 96 86 -10 setserial_main 1132 1122 -10 setfont_main 388 378 -10 setconsole_main 78 68 -10 sendmail_main 1209 1199 -10 sed_main 677 667 -10 script_main 1077 1067 -10 run_parts_main 325 315 -10 rtcwake_main 454 444 -10 rm_main 175 165 -10 reformime_main 119 109 -10 readlink_main 123 113 -10 rdate_main 246 236 -10 pwdx_main 189 179 -10 pstree_main 317 307 -10 pscan_main 663 653 -10 popmaildir_main 818 808 -10 pmap_main 80 70 -10 nc_main 1042 1032 -10 mv_main 558 548 -10 mountpoint_main 477 467 -10 mount_main 1264 1254 -10 modprobe_main 768 758 -10 modinfo_main 333 323 -10 mktemp_main 200 190 -10 mkswap_main 324 314 -10 mkfs_vfat_main 1489 1479 -10 microcom_main 715 705 -10 md5_sha1_sum_main 521 511 -10 man_main 867 857 -10 makedevs_main 1052 1042 -10 ls_main 563 553 -10 losetup_main 432 422 -10 loadfont_main 89 79 -10 ln_main 524 514 -10 link_main 75 65 -10 ipcalc_main 544 534 -10 iostat_main 2397 2387 -10 install_main 768 758 -10 id_main 480 470 -10 i2cset_main 1239 1229 -10 i2cget_main 380 370 -10 i2cdump_main 1482 1472 -10 i2cdetect_main 682 672 -10 hwclock_main 406 396 -10 httpd_main 741 731 -10 grep_main 837 827 -10 getty_main 1559 1549 -10 fuser_main 297 287 -10 ftpgetput_main 345 335 -10 ftpd_main 2232 2222 -10 fstrim_main 251 241 -10 fsfreeze_main 77 67 -10 fsck_minix_main 2921 2911 -10 flock_main 314 304 -10 flashcp_main 740 730 -10 flash_eraseall_main 833 823 -10 fdformat_main 532 522 -10 expand_main 680 670 -10 eject_main 335 325 -10 dumpleases_main 630 620 -10 du_main 314 304 -10 dos2unix_main 441 431 -10 diff_main 1350 1340 -10 df_main 1064 1054 -10 date_main 1095 1085 -10 cut_main 961 951 -10 cryptpw_main 228 218 -10 crontab_main 575 565 -10 crond_main 1149 1139 -10 cp_main 370 360 -10 common_traceroute_main 3834 3824 -10 common_ping_main 1767 1757 -10 comm_main 239 229 -10 cmp_main 655 645 -10 chrt_main 379 369 -10 chpst_main 704 694 -10 chpasswd_main 308 298 -10 chown_main 171 161 -10 chmod_main 158 148 -10 cat_main 428 418 -10 bzip2_main 120 110 -10 blkdiscard_main 264 254 -10 base64_main 221 211 -10 arping_main 1665 1655 -10 ar_main 556 546 -10 adjtimex_main 406 396 -10 adduser_main 882 872 -10 addgroup_main 411 401 -10 acpid_main 1198 1188 -10 optstring 11 - -11 opt_string 18 - -18 OPT_STR 25 - -25 ubi_tools_main 1288 1258 -30 ls_options 31 - -31 ------------------------------------------------------------------------------ (add/remove: 0/6 grow/shrink: 3/129 up/down: 86/-1383) Total: -1297 bytes text data bss dec hex filename 915428 485 6876 922789 e14a5 busybox_old 914629 485 6872 921986 e1182 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-08-09 01:25:02 +05:30
IF_GETPUT(opt =) getopt32(argv, "^"
IF_FEATURE_TFTP_GET("g") IF_FEATURE_TFTP_PUT("p")
getopt32: remove opt_complementary function old new delta vgetopt32 1318 1392 +74 runsvdir_main 703 713 +10 bb_make_directory 423 425 +2 collect_cpu 546 545 -1 opt_chars 3 - -3 opt_complementary 4 - -4 tftpd_main 567 562 -5 ntp_init 476 471 -5 zcip_main 1266 1256 -10 xxd_main 428 418 -10 whois_main 140 130 -10 who_main 463 453 -10 which_main 212 202 -10 wget_main 2535 2525 -10 watchdog_main 291 281 -10 watch_main 222 212 -10 vlock_main 399 389 -10 uuencode_main 332 322 -10 uudecode_main 316 306 -10 unlink_main 45 35 -10 udhcpd_main 1482 1472 -10 udhcpc_main 2762 2752 -10 tune2fs_main 290 280 -10 tunctl_main 366 356 -10 truncate_main 218 208 -10 tr_main 518 508 -10 time_main 1134 1124 -10 tftp_main 286 276 -10 telnetd_main 1873 1863 -10 tcpudpsvd_main 1785 1775 -10 taskset_main 521 511 -10 tar_main 1009 999 -10 tail_main 1644 1634 -10 syslogd_main 1967 1957 -10 switch_root_main 368 358 -10 svlogd_main 1454 1444 -10 sv 1296 1286 -10 stat_main 104 94 -10 start_stop_daemon_main 1028 1018 -10 split_main 542 532 -10 sort_main 796 786 -10 slattach_main 624 614 -10 shuf_main 504 494 -10 setsid_main 96 86 -10 setserial_main 1132 1122 -10 setfont_main 388 378 -10 setconsole_main 78 68 -10 sendmail_main 1209 1199 -10 sed_main 677 667 -10 script_main 1077 1067 -10 run_parts_main 325 315 -10 rtcwake_main 454 444 -10 rm_main 175 165 -10 reformime_main 119 109 -10 readlink_main 123 113 -10 rdate_main 246 236 -10 pwdx_main 189 179 -10 pstree_main 317 307 -10 pscan_main 663 653 -10 popmaildir_main 818 808 -10 pmap_main 80 70 -10 nc_main 1042 1032 -10 mv_main 558 548 -10 mountpoint_main 477 467 -10 mount_main 1264 1254 -10 modprobe_main 768 758 -10 modinfo_main 333 323 -10 mktemp_main 200 190 -10 mkswap_main 324 314 -10 mkfs_vfat_main 1489 1479 -10 microcom_main 715 705 -10 md5_sha1_sum_main 521 511 -10 man_main 867 857 -10 makedevs_main 1052 1042 -10 ls_main 563 553 -10 losetup_main 432 422 -10 loadfont_main 89 79 -10 ln_main 524 514 -10 link_main 75 65 -10 ipcalc_main 544 534 -10 iostat_main 2397 2387 -10 install_main 768 758 -10 id_main 480 470 -10 i2cset_main 1239 1229 -10 i2cget_main 380 370 -10 i2cdump_main 1482 1472 -10 i2cdetect_main 682 672 -10 hwclock_main 406 396 -10 httpd_main 741 731 -10 grep_main 837 827 -10 getty_main 1559 1549 -10 fuser_main 297 287 -10 ftpgetput_main 345 335 -10 ftpd_main 2232 2222 -10 fstrim_main 251 241 -10 fsfreeze_main 77 67 -10 fsck_minix_main 2921 2911 -10 flock_main 314 304 -10 flashcp_main 740 730 -10 flash_eraseall_main 833 823 -10 fdformat_main 532 522 -10 expand_main 680 670 -10 eject_main 335 325 -10 dumpleases_main 630 620 -10 du_main 314 304 -10 dos2unix_main 441 431 -10 diff_main 1350 1340 -10 df_main 1064 1054 -10 date_main 1095 1085 -10 cut_main 961 951 -10 cryptpw_main 228 218 -10 crontab_main 575 565 -10 crond_main 1149 1139 -10 cp_main 370 360 -10 common_traceroute_main 3834 3824 -10 common_ping_main 1767 1757 -10 comm_main 239 229 -10 cmp_main 655 645 -10 chrt_main 379 369 -10 chpst_main 704 694 -10 chpasswd_main 308 298 -10 chown_main 171 161 -10 chmod_main 158 148 -10 cat_main 428 418 -10 bzip2_main 120 110 -10 blkdiscard_main 264 254 -10 base64_main 221 211 -10 arping_main 1665 1655 -10 ar_main 556 546 -10 adjtimex_main 406 396 -10 adduser_main 882 872 -10 addgroup_main 411 401 -10 acpid_main 1198 1188 -10 optstring 11 - -11 opt_string 18 - -18 OPT_STR 25 - -25 ubi_tools_main 1288 1258 -30 ls_options 31 - -31 ------------------------------------------------------------------------------ (add/remove: 0/6 grow/shrink: 3/129 up/down: 86/-1383) Total: -1297 bytes text data bss dec hex filename 915428 485 6876 922789 e14a5 busybox_old 914629 485 6872 921986 e1182 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-08-09 01:25:02 +05:30
"l:r:" IF_FEATURE_TFTP_BLOCKSIZE("b:")
"\0"
/* -p or -g is mandatory, and they are mutually exclusive */
IF_FEATURE_TFTP_GET("g:") IF_FEATURE_TFTP_PUT("p:")
IF_GETPUT("g--p:p--g:"),
&local_file, &remote_file
getopt32: remove opt_complementary function old new delta vgetopt32 1318 1392 +74 runsvdir_main 703 713 +10 bb_make_directory 423 425 +2 collect_cpu 546 545 -1 opt_chars 3 - -3 opt_complementary 4 - -4 tftpd_main 567 562 -5 ntp_init 476 471 -5 zcip_main 1266 1256 -10 xxd_main 428 418 -10 whois_main 140 130 -10 who_main 463 453 -10 which_main 212 202 -10 wget_main 2535 2525 -10 watchdog_main 291 281 -10 watch_main 222 212 -10 vlock_main 399 389 -10 uuencode_main 332 322 -10 uudecode_main 316 306 -10 unlink_main 45 35 -10 udhcpd_main 1482 1472 -10 udhcpc_main 2762 2752 -10 tune2fs_main 290 280 -10 tunctl_main 366 356 -10 truncate_main 218 208 -10 tr_main 518 508 -10 time_main 1134 1124 -10 tftp_main 286 276 -10 telnetd_main 1873 1863 -10 tcpudpsvd_main 1785 1775 -10 taskset_main 521 511 -10 tar_main 1009 999 -10 tail_main 1644 1634 -10 syslogd_main 1967 1957 -10 switch_root_main 368 358 -10 svlogd_main 1454 1444 -10 sv 1296 1286 -10 stat_main 104 94 -10 start_stop_daemon_main 1028 1018 -10 split_main 542 532 -10 sort_main 796 786 -10 slattach_main 624 614 -10 shuf_main 504 494 -10 setsid_main 96 86 -10 setserial_main 1132 1122 -10 setfont_main 388 378 -10 setconsole_main 78 68 -10 sendmail_main 1209 1199 -10 sed_main 677 667 -10 script_main 1077 1067 -10 run_parts_main 325 315 -10 rtcwake_main 454 444 -10 rm_main 175 165 -10 reformime_main 119 109 -10 readlink_main 123 113 -10 rdate_main 246 236 -10 pwdx_main 189 179 -10 pstree_main 317 307 -10 pscan_main 663 653 -10 popmaildir_main 818 808 -10 pmap_main 80 70 -10 nc_main 1042 1032 -10 mv_main 558 548 -10 mountpoint_main 477 467 -10 mount_main 1264 1254 -10 modprobe_main 768 758 -10 modinfo_main 333 323 -10 mktemp_main 200 190 -10 mkswap_main 324 314 -10 mkfs_vfat_main 1489 1479 -10 microcom_main 715 705 -10 md5_sha1_sum_main 521 511 -10 man_main 867 857 -10 makedevs_main 1052 1042 -10 ls_main 563 553 -10 losetup_main 432 422 -10 loadfont_main 89 79 -10 ln_main 524 514 -10 link_main 75 65 -10 ipcalc_main 544 534 -10 iostat_main 2397 2387 -10 install_main 768 758 -10 id_main 480 470 -10 i2cset_main 1239 1229 -10 i2cget_main 380 370 -10 i2cdump_main 1482 1472 -10 i2cdetect_main 682 672 -10 hwclock_main 406 396 -10 httpd_main 741 731 -10 grep_main 837 827 -10 getty_main 1559 1549 -10 fuser_main 297 287 -10 ftpgetput_main 345 335 -10 ftpd_main 2232 2222 -10 fstrim_main 251 241 -10 fsfreeze_main 77 67 -10 fsck_minix_main 2921 2911 -10 flock_main 314 304 -10 flashcp_main 740 730 -10 flash_eraseall_main 833 823 -10 fdformat_main 532 522 -10 expand_main 680 670 -10 eject_main 335 325 -10 dumpleases_main 630 620 -10 du_main 314 304 -10 dos2unix_main 441 431 -10 diff_main 1350 1340 -10 df_main 1064 1054 -10 date_main 1095 1085 -10 cut_main 961 951 -10 cryptpw_main 228 218 -10 crontab_main 575 565 -10 crond_main 1149 1139 -10 cp_main 370 360 -10 common_traceroute_main 3834 3824 -10 common_ping_main 1767 1757 -10 comm_main 239 229 -10 cmp_main 655 645 -10 chrt_main 379 369 -10 chpst_main 704 694 -10 chpasswd_main 308 298 -10 chown_main 171 161 -10 chmod_main 158 148 -10 cat_main 428 418 -10 bzip2_main 120 110 -10 blkdiscard_main 264 254 -10 base64_main 221 211 -10 arping_main 1665 1655 -10 ar_main 556 546 -10 adjtimex_main 406 396 -10 adduser_main 882 872 -10 addgroup_main 411 401 -10 acpid_main 1198 1188 -10 optstring 11 - -11 opt_string 18 - -18 OPT_STR 25 - -25 ubi_tools_main 1288 1258 -30 ls_options 31 - -31 ------------------------------------------------------------------------------ (add/remove: 0/6 grow/shrink: 3/129 up/down: 86/-1383) Total: -1297 bytes text data bss dec hex filename 915428 485 6876 922789 e14a5 busybox_old 914629 485 6872 921986 e1182 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-08-09 01:25:02 +05:30
IF_FEATURE_TFTP_BLOCKSIZE(, &blksize_str)
);
argv += optind;
# if ENABLE_FEATURE_TFTP_BLOCKSIZE
/* Check if the blksize is valid:
* RFC2348 says between 8 and 65464 */
blksize = tftp_blksize_check(blksize_str, 65564);
if (blksize < 0) {
//bb_error_msg("bad block size");
return EXIT_FAILURE;
}
# endif
if (remote_file) {
if (!local_file) {
const char *slash = strrchr(remote_file, '/');
local_file = slash ? slash + 1 : remote_file;
}
} else {
remote_file = local_file;
}
/* Error if filename or host is not known */
if (!remote_file || !argv[0])
bb_show_usage();
port = bb_lookup_port(argv[1], "udp", 69);
peer_lsa = xhost2sockaddr(argv[0], port);
# if ENABLE_TFTP_DEBUG
fprintf(stderr, "using server '%s', remote_file '%s', local_file '%s'\n",
xmalloc_sockaddr2dotted(&peer_lsa->u.sa),
remote_file, local_file);
# endif
# if ENABLE_FEATURE_TFTP_PROGRESS_BAR
G.file = remote_file;
# endif
result = tftp_protocol(
NULL /*our_lsa*/, peer_lsa,
local_file, remote_file
IF_FEATURE_TFTP_BLOCKSIZE(, 1 /* want_transfer_size */)
IF_FEATURE_TFTP_BLOCKSIZE(, blksize)
);
tftp_progress_done();
if (result != EXIT_SUCCESS && NOT_LONE_DASH(local_file) && CMD_GET(opt)) {
unlink(local_file);
}
2006-10-06 04:42:49 +05:30
return result;
}
#endif /* ENABLE_TFTP */
#if ENABLE_TFTPD
int tftpd_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
2008-07-05 14:48:54 +05:30
int tftpd_main(int argc UNUSED_PARAM, char **argv)
{
len_and_sockaddr *our_lsa;
len_and_sockaddr *peer_lsa;
char *mode, *user_opt;
char *local_file = local_file;
const char *error_msg;
int opt, result, opcode;
IF_FEATURE_TFTP_BLOCKSIZE(int blksize = TFTP_BLKSIZE_DEFAULT;)
IF_FEATURE_TFTP_BLOCKSIZE(int want_transfer_size = 0;)
INIT_G();
our_lsa = get_sock_lsa(STDIN_FILENO);
if (!our_lsa) {
/* This is confusing:
*bb_error_msg_and_die("stdin is not a socket");
* Better: */
bb_show_usage();
/* Help text says that tftpd must be used as inetd service,
* which is by far the most usual cause of get_sock_lsa
* failure */
}
peer_lsa = xzalloc(LSA_LEN_SIZE + our_lsa->len);
peer_lsa->len = our_lsa->len;
/* Shifting to not collide with TFTP_OPTs */
opt = option_mask32 = TFTPD_OPT | (getopt32(argv, "rcu:l", &user_opt) << 8);
argv += optind;
if (opt & TFTPD_OPT_l) {
openlog(applet_name, LOG_PID, LOG_DAEMON);
logmode = LOGMODE_SYSLOG;
}
if (opt & TFTPD_OPT_u) {
/* Must be before xchroot */
G.pw = xgetpwnam(user_opt);
}
if (argv[0]) {
xchroot(argv[0]);
}
result = recv_from_to(STDIN_FILENO,
G.block_buf, sizeof(G.block_buf) + 1,
/* ^^^ sizeof+1 to reliably detect oversized input */
0 /* flags */,
&peer_lsa->u.sa, &our_lsa->u.sa, our_lsa->len);
error_msg = "malformed packet";
opcode = ntohs(*(uint16_t*)G.block_buf);
if (result < 4 || result > sizeof(G.block_buf)
/*|| G.block_buf[result-1] != '\0' - bug compatibility, see below */
|| (IF_FEATURE_TFTP_PUT(opcode != TFTP_RRQ) /* not download */
IF_GETPUT(&&)
IF_FEATURE_TFTP_GET(opcode != TFTP_WRQ) /* not upload */
)
) {
goto err;
}
/* Some HP PA-RISC firmware always sends fixed 516-byte requests,
* with trailing garbage.
* Support that by not requiring NUL to be the last byte (see above).
* To make strXYZ() ops safe, force NUL termination:
*/
G.block_buf_tail[0] = '\0';
local_file = G.block_buf + 2;
if (local_file[0] == '.' || strstr(local_file, "/.")) {
error_msg = "dot in file name";
goto err;
}
mode = local_file + strlen(local_file) + 1;
/* RFC 1350 says mode string is case independent */
if (mode >= G.block_buf + result || strcasecmp(mode, "octet") != 0) {
goto err;
}
# if ENABLE_FEATURE_TFTP_BLOCKSIZE
{
char *res;
char *opt_str = mode + sizeof("octet");
int opt_len = G.block_buf + result - opt_str;
if (opt_len > 0) {
res = tftp_get_option("blksize", opt_str, opt_len);
if (res) {
blksize = tftp_blksize_check(res, 65564);
if (blksize < 0) {
G_error_pkt_reason = ERR_BAD_OPT;
/* will just send error pkt */
goto do_proto;
}
}
if (opcode != TFTP_WRQ /* download? */
/* did client ask us about file size? */
&& tftp_get_option("tsize", opt_str, opt_len)
) {
want_transfer_size = 1;
}
}
}
# endif
if (!ENABLE_FEATURE_TFTP_PUT || opcode == TFTP_WRQ) {
if (opt & TFTPD_OPT_r) {
/* This would mean "disk full" - not true */
/*G_error_pkt_reason = ERR_WRITE;*/
error_msg = bb_msg_write_error;
goto err;
}
IF_GETPUT(option_mask32 |= TFTP_OPT_GET;) /* will receive file's data */
} else {
IF_GETPUT(option_mask32 |= TFTP_OPT_PUT;) /* will send file's data */
}
/* NB: if G_error_pkt_str or G_error_pkt_reason is set up,
* tftp_protocol() just sends one error pkt and returns */
do_proto:
close(STDIN_FILENO); /* close old, possibly wildcard socket */
/* tftp_protocol() will create new one, bound to particular local IP */
result = tftp_protocol(
our_lsa, peer_lsa,
local_file IF_TFTP(, NULL /*remote_file*/)
IF_FEATURE_TFTP_BLOCKSIZE(, want_transfer_size)
IF_FEATURE_TFTP_BLOCKSIZE(, blksize)
);
return result;
err:
strcpy(G_error_pkt_str, error_msg);
goto do_proto;
}
#endif /* ENABLE_TFTPD */
#endif /* ENABLE_FEATURE_TFTP_GET || ENABLE_FEATURE_TFTP_PUT */