busybox/networking/ifplugd.c

768 lines
20 KiB
C
Raw Normal View History

/* vi: set sw=4 ts=4: */
/*
* ifplugd for busybox, based on ifplugd 0.28 (written by Lennart Poettering).
*
2009-04-26 06:47:44 +05:30
* Copyright (C) 2009 Maksym Kryzhanovskyy <xmaks@email.cz>
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/
//config:config IFPLUGD
//config: bool "ifplugd (10 kb)"
//config: default y
//config: select PLATFORM_LINUX
//config: help
//config: Network interface plug detection daemon.
//applet:IF_IFPLUGD(APPLET(ifplugd, BB_DIR_USR_SBIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_IFPLUGD) += ifplugd.o
//usage:#define ifplugd_trivial_usage
//usage: "[OPTIONS]"
//usage:#define ifplugd_full_usage "\n\n"
//usage: "Network interface plug detection daemon\n"
//usage: "\n -n Don't daemonize"
//usage: "\n -s Don't log to syslog"
//usage: "\n -i IFACE Interface"
//usage: "\n -f/-F Treat link detection error as link down/link up"
//usage: "\n (otherwise exit on error)"
//usage: "\n -a Don't up interface at each link probe"
//usage: "\n -M Monitor creation/destruction of interface"
//usage: "\n (otherwise it must exist)"
//usage: "\n -r PROG Script to run"
//usage: "\n -x ARG Extra argument for script"
//usage: "\n -I Don't exit on nonzero exit code from script"
//usage: "\n -p Don't run \"up\" script on startup"
//usage: "\n -q Don't run \"down\" script on exit"
//usage: "\n -l Always run script on startup"
//usage: "\n -t SECS Poll time in seconds"
//usage: "\n -u SECS Delay before running script after link up"
//usage: "\n -d SECS Delay after link down"
//usage: "\n -m MODE API mode (mii, priv, ethtool, wlan, iff, auto)"
//usage: "\n -k Kill running daemon"
#include "libbb.h"
#include "fix_u32.h"
#include <linux/if.h>
2009-05-01 12:34:25 +05:30
#include <linux/mii.h>
#include <linux/ethtool.h>
#ifdef HAVE_NET_ETHERNET_H
/* musl breakage:
* In file included from /usr/include/net/ethernet.h:10,
* from networking/ifplugd.c:41:
* /usr/include/netinet/if_ether.h:96: error: redefinition of 'struct ethhdr'
*
* Build succeeds without it on musl. Commented it out.
* If on your system you need it, consider removing <linux/ethtool.h>
* and copy-pasting its definitions here (<linux/ethtool.h> is what pulls in
* conflicting definition of struct ethhdr on musl).
*/
/* # include <net/ethernet.h> */
#endif
#include <linux/netlink.h>
#include <linux/rtnetlink.h>
#include <linux/sockios.h>
#include <syslog.h>
#define __user
#include <linux/wireless.h>
#ifndef ETH_ALEN
# define ETH_ALEN 6
#endif
2009-04-26 06:47:44 +05:30
/*
From initial port to busybox, removed most of the redundancy by
converting implementation of a polymorphic interface to the strict
functional style. The main role is run a script when link state
changed, other activities like audio signal or detailed reports
are on the script itself.
2009-04-26 06:47:44 +05:30
One questionable point of the design is netlink usage:
We have 1 second timeout by default to poll the link status,
it is short enough so that there are no real benefits in
using netlink to get "instantaneous" interface creation/deletion
notifications. We can check for interface existence by just
doing some fast ioctl using its name.
Netlink code then can be just dropped (1k or more?)
*/
#define IFPLUGD_ENV_PREVIOUS "IFPLUGD_PREVIOUS"
#define IFPLUGD_ENV_CURRENT "IFPLUGD_CURRENT"
enum {
FLAG_NO_AUTO = 1 << 0, // -a, Do not enable interface automatically
FLAG_NO_DAEMON = 1 << 1, // -n, Do not daemonize
FLAG_NO_SYSLOG = 1 << 2, // -s, Do not use syslog, use stderr instead
FLAG_IGNORE_FAIL = 1 << 3, // -f, Ignore detection failure, retry instead (failure is treated as DOWN)
FLAG_IGNORE_FAIL_POSITIVE = 1 << 4, // -F, Ignore detection failure, retry instead (failure is treated as UP)
FLAG_IFACE = 1 << 5, // -i, Specify ethernet interface
FLAG_RUN = 1 << 6, // -r, Specify program to execute
FLAG_IGNORE_RETVAL = 1 << 7, // -I, Don't exit on nonzero return value of program executed
FLAG_POLL_TIME = 1 << 8, // -t, Specify poll time in seconds
FLAG_DELAY_UP = 1 << 9, // -u, Specify delay for configuring interface
FLAG_DELAY_DOWN = 1 << 10, // -d, Specify delay for deconfiguring interface
FLAG_API_MODE = 1 << 11, // -m, Force API mode (mii, priv, ethtool, wlan, auto)
FLAG_NO_STARTUP = 1 << 12, // -p, Don't run script on daemon startup
FLAG_NO_SHUTDOWN = 1 << 13, // -q, Don't run script on daemon quit
FLAG_INITIAL_DOWN = 1 << 14, // -l, Run "down" script on startup if no cable is detected
FLAG_EXTRA_ARG = 1 << 15, // -x, Specify an extra argument for action script
FLAG_MONITOR = 1 << 16, // -M, Use interface monitoring
#if ENABLE_FEATURE_PIDFILE
FLAG_KILL = 1 << 17, // -k, Kill a running daemon
#endif
};
#if ENABLE_FEATURE_PIDFILE
# define OPTION_STR "+ansfFi:r:It:+u:+d:+m:pqlx:Mk"
#else
# define OPTION_STR "+ansfFi:r:It:+u:+d:+m:pqlx:M"
#endif
enum { // interface status
IFSTATUS_ERR = -1,
IFSTATUS_DOWN = 0,
IFSTATUS_UP = 1,
};
enum { // constant fds
ioctl_fd = 3,
netlink_fd = 4,
};
struct globals {
smallint iface_last_status;
smallint iface_prev_status;
smallint iface_exists;
smallint api_method_num;
/* Used in getopt32, must have sizeof == sizeof(int) */
unsigned poll_time;
unsigned delay_up;
unsigned delay_down;
const char *iface;
const char *api_mode;
const char *script_name;
const char *extra_arg;
};
#define G (*ptr_to_globals)
#define INIT_G() do { \
SET_PTR_TO_GLOBALS(xzalloc(sizeof(G))); \
G.iface_last_status = -1; \
G.iface_exists = 1; \
G.poll_time = 1; \
G.delay_down = 5; \
G.iface = "eth0"; \
G.api_mode = "a"; \
G.script_name = "/etc/ifplugd/ifplugd.action"; \
} while (0)
/* Utility routines */
static void set_ifreq_to_ifname(struct ifreq *ifreq)
{
memset(ifreq, 0, sizeof(struct ifreq));
strncpy_IFNAMSIZ(ifreq->ifr_name, G.iface);
}
static int network_ioctl(int request, void* data, const char *errmsg)
{
int r = ioctl(ioctl_fd, request, data);
if (r < 0 && errmsg)
bb_perror_msg("%s failed", errmsg);
return r;
}
/* Link detection routines and table */
static smallint detect_link_mii(void)
{
/* char buffer instead of bona-fide struct avoids aliasing warning */
char buf[sizeof(struct ifreq)];
struct ifreq *const ifreq = (void *)buf;
struct mii_ioctl_data *mii = (void *)&ifreq->ifr_data;
set_ifreq_to_ifname(ifreq);
if (network_ioctl(SIOCGMIIPHY, ifreq, "SIOCGMIIPHY") < 0) {
return IFSTATUS_ERR;
}
2009-05-01 12:34:25 +05:30
mii->reg_num = 1;
if (network_ioctl(SIOCGMIIREG, ifreq, "SIOCGMIIREG") < 0) {
return IFSTATUS_ERR;
}
2009-05-01 12:34:25 +05:30
return (mii->val_out & 0x0004) ? IFSTATUS_UP : IFSTATUS_DOWN;
}
static smallint detect_link_priv(void)
{
/* char buffer instead of bona-fide struct avoids aliasing warning */
char buf[sizeof(struct ifreq)];
struct ifreq *const ifreq = (void *)buf;
struct mii_ioctl_data *mii = (void *)&ifreq->ifr_data;
set_ifreq_to_ifname(ifreq);
if (network_ioctl(SIOCDEVPRIVATE, ifreq, "SIOCDEVPRIVATE") < 0) {
return IFSTATUS_ERR;
}
2009-05-01 12:34:25 +05:30
mii->reg_num = 1;
if (network_ioctl(SIOCDEVPRIVATE+1, ifreq, "SIOCDEVPRIVATE+1") < 0) {
return IFSTATUS_ERR;
}
2009-05-01 12:34:25 +05:30
return (mii->val_out & 0x0004) ? IFSTATUS_UP : IFSTATUS_DOWN;
}
static smallint detect_link_ethtool(void)
{
struct ifreq ifreq;
struct ethtool_value edata;
set_ifreq_to_ifname(&ifreq);
edata.cmd = ETHTOOL_GLINK;
ifreq.ifr_data = (void*) &edata;
if (network_ioctl(SIOCETHTOOL, &ifreq, "ETHTOOL_GLINK") < 0) {
return IFSTATUS_ERR;
}
return edata.data ? IFSTATUS_UP : IFSTATUS_DOWN;
}
static smallint detect_link_iff(void)
{
struct ifreq ifreq;
set_ifreq_to_ifname(&ifreq);
if (network_ioctl(SIOCGIFFLAGS, &ifreq, "SIOCGIFFLAGS") < 0) {
return IFSTATUS_ERR;
}
/* If IFF_UP is not set (interface is down), IFF_RUNNING is never set
* regardless of link status. Simply continue to report last status -
* no point in reporting spurious link downs if interface is disabled
* by admin. When/if it will be brought up,
* we'll report real link status.
*/
if (!(ifreq.ifr_flags & IFF_UP) && G.iface_last_status != IFSTATUS_ERR)
return G.iface_last_status;
return (ifreq.ifr_flags & IFF_RUNNING) ? IFSTATUS_UP : IFSTATUS_DOWN;
}
static smallint detect_link_wlan(void)
{
int i;
struct iwreq iwrequest;
uint8_t mac[ETH_ALEN];
memset(&iwrequest, 0, sizeof(iwrequest));
2009-04-26 07:13:36 +05:30
strncpy_IFNAMSIZ(iwrequest.ifr_ifrn.ifrn_name, G.iface);
if (network_ioctl(SIOCGIWAP, &iwrequest, "SIOCGIWAP") < 0) {
return IFSTATUS_ERR;
}
memcpy(mac, &iwrequest.u.ap_addr.sa_data, ETH_ALEN);
if (mac[0] == 0xFF || mac[0] == 0x44 || mac[0] == 0x00) {
for (i = 1; i < ETH_ALEN; ++i) {
if (mac[i] != mac[0])
return IFSTATUS_UP;
}
return IFSTATUS_DOWN;
}
return IFSTATUS_UP;
}
enum { // api mode
API_ETHTOOL, // 'e'
API_MII, // 'm'
API_PRIVATE, // 'p'
API_WLAN, // 'w'
API_IFF, // 'i'
API_AUTO, // 'a'
};
static const char api_modes[] ALIGN1 = "empwia";
static const struct {
const char *name;
smallint (*func)(void);
} method_table[] = {
{ "SIOCETHTOOL" , &detect_link_ethtool },
{ "SIOCGMIIPHY" , &detect_link_mii },
{ "SIOCDEVPRIVATE" , &detect_link_priv },
{ "wireless extension", &detect_link_wlan },
{ "IFF_RUNNING" , &detect_link_iff },
};
static const char *strstatus(int status)
{
if (status == IFSTATUS_ERR)
return "error";
return "down\0up" + (status * 5);
}
static int run_script(const char *action)
{
char *env_PREVIOUS, *env_CURRENT;
char *argv[5];
int r;
Optionally re-introduce bb_info_msg() Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was eliminated and calls to it changed to be bb_error_msg(). The downside of this is that daemons now log all messages to syslog at the LOG_ERR level which makes it hard to filter errors from informational messages. This change optionally re-introduces bb_info_msg(), controlled by a new option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that were removed (only in applets that set logmode to LOGMODE_SYSLOG or LOGMODE_BOTH), and also changes informational messages in ifplugd and ntpd. The code size change of this is as follows (using 'defconfig' on x86_64 with gcc 7.3.0-27ubuntu1~18.04) function old new delta bb_info_msg - 182 +182 bb_vinfo_msg - 27 +27 static.log7 194 198 +4 log8 190 191 +1 log5 190 191 +1 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes If you don't care about everything being logged at LOG_ERR level then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller: function old new delta static.log7 194 200 +6 log8 190 193 +3 log5 190 193 +3 syslog_level 1 - -1 bb_verror_msg 583 581 -2 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-12 22:31:51 +05:30
bb_info_msg("executing '%s %s %s'", G.script_name, G.iface, action);
argv[0] = (char*) G.script_name;
argv[1] = (char*) G.iface;
argv[2] = (char*) action;
argv[3] = (char*) G.extra_arg;
argv[4] = NULL;
env_PREVIOUS = xasprintf("%s=%s", IFPLUGD_ENV_PREVIOUS, strstatus(G.iface_prev_status));
putenv(env_PREVIOUS);
env_CURRENT = xasprintf("%s=%s", IFPLUGD_ENV_CURRENT, strstatus(G.iface_last_status));
putenv(env_CURRENT);
/* r < 0 - can't exec, 0 <= r < 0x180 - exited, >=0x180 - killed by sig (r-0x180) */
r = spawn_and_wait(argv);
bb_unsetenv_and_free(env_PREVIOUS);
bb_unsetenv_and_free(env_CURRENT);
Optionally re-introduce bb_info_msg() Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was eliminated and calls to it changed to be bb_error_msg(). The downside of this is that daemons now log all messages to syslog at the LOG_ERR level which makes it hard to filter errors from informational messages. This change optionally re-introduces bb_info_msg(), controlled by a new option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that were removed (only in applets that set logmode to LOGMODE_SYSLOG or LOGMODE_BOTH), and also changes informational messages in ifplugd and ntpd. The code size change of this is as follows (using 'defconfig' on x86_64 with gcc 7.3.0-27ubuntu1~18.04) function old new delta bb_info_msg - 182 +182 bb_vinfo_msg - 27 +27 static.log7 194 198 +4 log8 190 191 +1 log5 190 191 +1 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes If you don't care about everything being logged at LOG_ERR level then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller: function old new delta static.log7 194 200 +6 log8 190 193 +3 log5 190 193 +3 syslog_level 1 - -1 bb_verror_msg 583 581 -2 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-12 22:31:51 +05:30
bb_info_msg("exit code: %d", r & 0xff);
return (option_mask32 & FLAG_IGNORE_RETVAL) ? 0 : r;
}
static void up_iface(void)
{
struct ifreq ifrequest;
if (!G.iface_exists)
return;
set_ifreq_to_ifname(&ifrequest);
if (network_ioctl(SIOCGIFFLAGS, &ifrequest, "getting interface flags") < 0) {
G.iface_exists = 0;
return;
}
if (!(ifrequest.ifr_flags & IFF_UP)) {
ifrequest.ifr_flags |= IFF_UP;
/* Let user know we mess up with interface */
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_info_msg("upping interface");
if (network_ioctl(SIOCSIFFLAGS, &ifrequest, "setting interface flags") < 0) {
if (errno != ENODEV && errno != EADDRNOTAVAIL)
xfunc_die();
G.iface_exists = 0;
return;
}
}
#if 0 /* why do we mess with IP addr? It's not our business */
if (network_ioctl(SIOCGIFADDR, &ifrequest, "can't get interface address") < 0) {
} else if (ifrequest.ifr_addr.sa_family != AF_INET) {
bb_perror_msg("the interface is not IP-based");
} else {
((struct sockaddr_in*)(&ifrequest.ifr_addr))->sin_addr.s_addr = INADDR_ANY;
network_ioctl(SIOCSIFADDR, &ifrequest, "can't set interface address");
}
network_ioctl(SIOCGIFFLAGS, &ifrequest, "can't get interface flags");
#endif
}
static void maybe_up_new_iface(void)
{
if (!(option_mask32 & FLAG_NO_AUTO))
up_iface();
#if 0 /* bloat */
struct ifreq ifrequest;
struct ethtool_drvinfo driver_info;
set_ifreq_to_ifname(&ifrequest);
driver_info.cmd = ETHTOOL_GDRVINFO;
ifrequest.ifr_data = &driver_info;
if (network_ioctl(SIOCETHTOOL, &ifrequest, NULL) == 0) {
char buf[sizeof("/xx:xx:xx:xx:xx:xx")];
/* Get MAC */
buf[0] = '\0';
set_ifreq_to_ifname(&ifrequest);
if (network_ioctl(SIOCGIFHWADDR, &ifrequest, NULL) == 0) {
sprintf(buf, "/%02X:%02X:%02X:%02X:%02X:%02X",
(uint8_t)(ifrequest.ifr_hwaddr.sa_data[0]),
(uint8_t)(ifrequest.ifr_hwaddr.sa_data[1]),
(uint8_t)(ifrequest.ifr_hwaddr.sa_data[2]),
(uint8_t)(ifrequest.ifr_hwaddr.sa_data[3]),
(uint8_t)(ifrequest.ifr_hwaddr.sa_data[4]),
(uint8_t)(ifrequest.ifr_hwaddr.sa_data[5]));
}
Optionally re-introduce bb_info_msg() Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was eliminated and calls to it changed to be bb_error_msg(). The downside of this is that daemons now log all messages to syslog at the LOG_ERR level which makes it hard to filter errors from informational messages. This change optionally re-introduces bb_info_msg(), controlled by a new option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that were removed (only in applets that set logmode to LOGMODE_SYSLOG or LOGMODE_BOTH), and also changes informational messages in ifplugd and ntpd. The code size change of this is as follows (using 'defconfig' on x86_64 with gcc 7.3.0-27ubuntu1~18.04) function old new delta bb_info_msg - 182 +182 bb_vinfo_msg - 27 +27 static.log7 194 198 +4 log8 190 191 +1 log5 190 191 +1 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes If you don't care about everything being logged at LOG_ERR level then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller: function old new delta static.log7 194 200 +6 log8 190 193 +3 log5 190 193 +3 syslog_level 1 - -1 bb_verror_msg 583 581 -2 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-12 22:31:51 +05:30
bb_info_msg("using interface %s%s with driver<%s> (version: %s)",
G.iface, buf, driver_info.driver, driver_info.version);
}
#endif
if (G.api_mode[0] == 'a')
G.api_method_num = API_AUTO;
}
static smallint detect_link(void)
{
smallint status;
if (!G.iface_exists)
return (option_mask32 & FLAG_MONITOR) ? IFSTATUS_DOWN : IFSTATUS_ERR;
/* Some drivers can't detect link status when the interface is down.
* I imagine detect_link_iff() is the most vulnerable.
* That's why -a "noauto" in an option, not a hardwired behavior.
*/
if (!(option_mask32 & FLAG_NO_AUTO))
up_iface();
if (G.api_method_num == API_AUTO) {
int i;
smallint sv_logmode;
sv_logmode = logmode;
for (i = 0; i < ARRAY_SIZE(method_table); i++) {
logmode = LOGMODE_NONE;
status = method_table[i].func();
logmode = sv_logmode;
if (status != IFSTATUS_ERR) {
G.api_method_num = i;
Optionally re-introduce bb_info_msg() Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was eliminated and calls to it changed to be bb_error_msg(). The downside of this is that daemons now log all messages to syslog at the LOG_ERR level which makes it hard to filter errors from informational messages. This change optionally re-introduces bb_info_msg(), controlled by a new option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that were removed (only in applets that set logmode to LOGMODE_SYSLOG or LOGMODE_BOTH), and also changes informational messages in ifplugd and ntpd. The code size change of this is as follows (using 'defconfig' on x86_64 with gcc 7.3.0-27ubuntu1~18.04) function old new delta bb_info_msg - 182 +182 bb_vinfo_msg - 27 +27 static.log7 194 198 +4 log8 190 191 +1 log5 190 191 +1 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes If you don't care about everything being logged at LOG_ERR level then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller: function old new delta static.log7 194 200 +6 log8 190 193 +3 log5 190 193 +3 syslog_level 1 - -1 bb_verror_msg 583 581 -2 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-12 22:31:51 +05:30
bb_info_msg("using %s detection mode", method_table[i].name);
break;
}
}
} else {
status = method_table[G.api_method_num].func();
}
if (status == IFSTATUS_ERR) {
if (option_mask32 & FLAG_IGNORE_FAIL)
status = IFSTATUS_DOWN;
else if (option_mask32 & FLAG_IGNORE_FAIL_POSITIVE)
status = IFSTATUS_UP;
else if (G.api_mode[0] == 'a')
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg("can't detect link status");
}
if (status != G.iface_last_status) {
G.iface_prev_status = G.iface_last_status;
G.iface_last_status = status;
}
return status;
}
static NOINLINE int check_existence_through_netlink(void)
{
int iface_len;
/* Buffer was 1K, but on linux-3.9.9 it was reported to be too small.
* netlink.h: "limit to 8K to avoid MSG_TRUNC when PAGE_SIZE is very large".
* Note: on error returns (-1) we exit, no need to free replybuf.
*/
enum { BUF_SIZE = 8 * 1024 };
char *replybuf = xmalloc(BUF_SIZE);
iface_len = strlen(G.iface);
while (1) {
struct nlmsghdr *mhdr;
ssize_t bytes;
bytes = recv(netlink_fd, replybuf, BUF_SIZE, MSG_DONTWAIT);
if (bytes < 0) {
if (errno == EAGAIN)
goto ret;
if (errno == EINTR)
continue;
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_perror_msg("netlink: recv");
return -1;
}
mhdr = (struct nlmsghdr*)replybuf;
while (bytes > 0) {
if (!NLMSG_OK(mhdr, bytes)) {
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg("netlink packet too small or truncated");
return -1;
}
if (mhdr->nlmsg_type == RTM_NEWLINK || mhdr->nlmsg_type == RTM_DELLINK) {
struct rtattr *attr;
int attr_len;
if (mhdr->nlmsg_len < NLMSG_LENGTH(sizeof(struct ifinfomsg))) {
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg("netlink packet too small or truncated");
return -1;
}
attr = IFLA_RTA(NLMSG_DATA(mhdr));
attr_len = IFLA_PAYLOAD(mhdr);
while (RTA_OK(attr, attr_len)) {
if (attr->rta_type == IFLA_IFNAME) {
int len = RTA_PAYLOAD(attr);
if (len > IFNAMSIZ)
len = IFNAMSIZ;
if (iface_len <= len
&& strncmp(G.iface, RTA_DATA(attr), len) == 0
) {
G.iface_exists = (mhdr->nlmsg_type == RTM_NEWLINK);
}
}
attr = RTA_NEXT(attr, attr_len);
}
}
mhdr = NLMSG_NEXT(mhdr, bytes);
}
}
ret:
free(replybuf);
return G.iface_exists;
}
2009-05-01 12:34:25 +05:30
#if ENABLE_FEATURE_PIDFILE
static NOINLINE pid_t read_pid(const char *filename)
{
int len;
char buf[128];
len = open_read_close(filename, buf, 127);
if (len > 0) {
buf[len] = '\0';
/* returns ULONG_MAX on error => -1 */
return bb_strtoul(buf, NULL, 10);
}
return 0;
}
2009-05-01 12:34:25 +05:30
#endif
int ifplugd_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int ifplugd_main(int argc UNUSED_PARAM, char **argv)
{
int iface_status;
int delay_time;
const char *iface_status_str;
struct pollfd netlink_pollfd[1];
unsigned opts;
const char *api_mode_found;
#if ENABLE_FEATURE_PIDFILE
char *pidfile_name;
pid_t pid_from_pidfile;
#endif
INIT_G();
opts = getopt32(argv, OPTION_STR,
&G.iface, &G.script_name, &G.poll_time, &G.delay_up,
&G.delay_down, &G.api_mode, &G.extra_arg);
G.poll_time *= 1000;
applet_name = xasprintf("ifplugd(%s)", G.iface);
#if ENABLE_FEATURE_PIDFILE
pidfile_name = xasprintf(CONFIG_PID_FILE_PATH "/ifplugd.%s.pid", G.iface);
pid_from_pidfile = read_pid(pidfile_name);
if (opts & FLAG_KILL) {
if (pid_from_pidfile > 0)
/* Upstream tool use SIGINT for -k */
kill(pid_from_pidfile, SIGINT);
return EXIT_SUCCESS;
}
if (pid_from_pidfile > 0 && kill(pid_from_pidfile, 0) == 0)
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg_and_die("daemon already running");
#endif
api_mode_found = strchr(api_modes, G.api_mode[0]);
if (!api_mode_found)
bb_error_msg_and_die("unknown API mode '%s'", G.api_mode);
G.api_method_num = api_mode_found - api_modes;
if (!(opts & FLAG_NO_DAEMON))
bb_daemonize_or_rexec(DAEMON_CHDIR_ROOT, argv);
xmove_fd(xsocket(AF_INET, SOCK_DGRAM, 0), ioctl_fd);
if (opts & FLAG_MONITOR) {
int fd = create_and_bind_to_netlink(NETLINK_ROUTE, RTMGRP_LINK, 0);
xmove_fd(fd, netlink_fd);
}
write_pidfile(pidfile_name);
/* this can't be moved before socket creation */
if (!(opts & FLAG_NO_SYSLOG)) {
openlog(applet_name, 0, LOG_DAEMON);
logmode |= LOGMODE_SYSLOG;
}
bb_signals(0
| (1 << SIGINT )
| (1 << SIGTERM)
| (1 << SIGQUIT)
| (1 << SIGHUP ) /* why we ignore it? */
/* | (1 << SIGCHLD) - run_script does not use it anymore */
, record_signo);
Optionally re-introduce bb_info_msg() Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was eliminated and calls to it changed to be bb_error_msg(). The downside of this is that daemons now log all messages to syslog at the LOG_ERR level which makes it hard to filter errors from informational messages. This change optionally re-introduces bb_info_msg(), controlled by a new option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that were removed (only in applets that set logmode to LOGMODE_SYSLOG or LOGMODE_BOTH), and also changes informational messages in ifplugd and ntpd. The code size change of this is as follows (using 'defconfig' on x86_64 with gcc 7.3.0-27ubuntu1~18.04) function old new delta bb_info_msg - 182 +182 bb_vinfo_msg - 27 +27 static.log7 194 198 +4 log8 190 191 +1 log5 190 191 +1 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes If you don't care about everything being logged at LOG_ERR level then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller: function old new delta static.log7 194 200 +6 log8 190 193 +3 log5 190 193 +3 syslog_level 1 - -1 bb_verror_msg 583 581 -2 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-12 22:31:51 +05:30
bb_info_msg("started: %s", bb_banner);
if (opts & FLAG_MONITOR) {
struct ifreq ifrequest;
set_ifreq_to_ifname(&ifrequest);
G.iface_exists = (network_ioctl(SIOCGIFINDEX, &ifrequest, NULL) == 0);
}
if (G.iface_exists)
maybe_up_new_iface();
iface_status = detect_link();
if (iface_status == IFSTATUS_ERR)
goto exiting;
iface_status_str = strstatus(iface_status);
if (opts & FLAG_MONITOR) {
Optionally re-introduce bb_info_msg() Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was eliminated and calls to it changed to be bb_error_msg(). The downside of this is that daemons now log all messages to syslog at the LOG_ERR level which makes it hard to filter errors from informational messages. This change optionally re-introduces bb_info_msg(), controlled by a new option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that were removed (only in applets that set logmode to LOGMODE_SYSLOG or LOGMODE_BOTH), and also changes informational messages in ifplugd and ntpd. The code size change of this is as follows (using 'defconfig' on x86_64 with gcc 7.3.0-27ubuntu1~18.04) function old new delta bb_info_msg - 182 +182 bb_vinfo_msg - 27 +27 static.log7 194 198 +4 log8 190 191 +1 log5 190 191 +1 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes If you don't care about everything being logged at LOG_ERR level then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller: function old new delta static.log7 194 200 +6 log8 190 193 +3 log5 190 193 +3 syslog_level 1 - -1 bb_verror_msg 583 581 -2 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-12 22:31:51 +05:30
bb_info_msg("interface %s",
G.iface_exists ? "exists"
: "doesn't exist, waiting");
}
/* else we assume it always exists, but don't mislead user
* by potentially lying that it really exists */
if (G.iface_exists) {
Optionally re-introduce bb_info_msg() Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was eliminated and calls to it changed to be bb_error_msg(). The downside of this is that daemons now log all messages to syslog at the LOG_ERR level which makes it hard to filter errors from informational messages. This change optionally re-introduces bb_info_msg(), controlled by a new option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that were removed (only in applets that set logmode to LOGMODE_SYSLOG or LOGMODE_BOTH), and also changes informational messages in ifplugd and ntpd. The code size change of this is as follows (using 'defconfig' on x86_64 with gcc 7.3.0-27ubuntu1~18.04) function old new delta bb_info_msg - 182 +182 bb_vinfo_msg - 27 +27 static.log7 194 198 +4 log8 190 191 +1 log5 190 191 +1 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes If you don't care about everything being logged at LOG_ERR level then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller: function old new delta static.log7 194 200 +6 log8 190 193 +3 log5 190 193 +3 syslog_level 1 - -1 bb_verror_msg 583 581 -2 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-12 22:31:51 +05:30
bb_info_msg("link is %s", iface_status_str);
}
if ((!(opts & FLAG_NO_STARTUP)
&& iface_status == IFSTATUS_UP
)
|| (opts & FLAG_INITIAL_DOWN)
) {
if (run_script(iface_status_str) != 0)
goto exiting;
}
/* Main loop */
netlink_pollfd[0].fd = netlink_fd;
netlink_pollfd[0].events = POLLIN;
delay_time = 0;
while (1) {
int iface_status_old;
switch (bb_got_signal) {
case SIGINT:
case SIGTERM:
bb_got_signal = 0;
goto cleanup;
case SIGQUIT:
bb_got_signal = 0;
goto exiting;
default:
bb_got_signal = 0;
/* do not clear bb_got_signal if already 0, this can lose signals */
case 0:
break;
}
if (poll(netlink_pollfd,
(opts & FLAG_MONITOR) ? 1 : 0,
G.poll_time
) < 0
) {
if (errno == EINTR)
continue;
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_perror_msg("poll");
goto exiting;
}
if ((opts & FLAG_MONITOR)
&& (netlink_pollfd[0].revents & POLLIN)
) {
int iface_exists_old;
iface_exists_old = G.iface_exists;
G.iface_exists = check_existence_through_netlink();
if (G.iface_exists < 0) /* error */
goto exiting;
if (iface_exists_old != G.iface_exists) {
Optionally re-introduce bb_info_msg() Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was eliminated and calls to it changed to be bb_error_msg(). The downside of this is that daemons now log all messages to syslog at the LOG_ERR level which makes it hard to filter errors from informational messages. This change optionally re-introduces bb_info_msg(), controlled by a new option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that were removed (only in applets that set logmode to LOGMODE_SYSLOG or LOGMODE_BOTH), and also changes informational messages in ifplugd and ntpd. The code size change of this is as follows (using 'defconfig' on x86_64 with gcc 7.3.0-27ubuntu1~18.04) function old new delta bb_info_msg - 182 +182 bb_vinfo_msg - 27 +27 static.log7 194 198 +4 log8 190 191 +1 log5 190 191 +1 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes If you don't care about everything being logged at LOG_ERR level then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller: function old new delta static.log7 194 200 +6 log8 190 193 +3 log5 190 193 +3 syslog_level 1 - -1 bb_verror_msg 583 581 -2 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-12 22:31:51 +05:30
bb_info_msg("interface %sappeared",
G.iface_exists ? "" : "dis");
if (G.iface_exists)
maybe_up_new_iface();
}
}
/* note: if !G.iface_exists, returns DOWN */
iface_status_old = iface_status;
iface_status = detect_link();
if (iface_status == IFSTATUS_ERR) {
if (!(opts & FLAG_MONITOR))
goto exiting;
iface_status = IFSTATUS_DOWN;
}
iface_status_str = strstatus(iface_status);
if (iface_status_old != iface_status) {
Optionally re-introduce bb_info_msg() Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was eliminated and calls to it changed to be bb_error_msg(). The downside of this is that daemons now log all messages to syslog at the LOG_ERR level which makes it hard to filter errors from informational messages. This change optionally re-introduces bb_info_msg(), controlled by a new option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that were removed (only in applets that set logmode to LOGMODE_SYSLOG or LOGMODE_BOTH), and also changes informational messages in ifplugd and ntpd. The code size change of this is as follows (using 'defconfig' on x86_64 with gcc 7.3.0-27ubuntu1~18.04) function old new delta bb_info_msg - 182 +182 bb_vinfo_msg - 27 +27 static.log7 194 198 +4 log8 190 191 +1 log5 190 191 +1 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes If you don't care about everything being logged at LOG_ERR level then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller: function old new delta static.log7 194 200 +6 log8 190 193 +3 log5 190 193 +3 syslog_level 1 - -1 bb_verror_msg 583 581 -2 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-12 22:31:51 +05:30
bb_info_msg("link is %s", iface_status_str);
if (delay_time) {
/* link restored its old status before
* we ran script. don't run the script: */
delay_time = 0;
} else {
delay_time = monotonic_sec();
if (iface_status == IFSTATUS_UP)
delay_time += G.delay_up;
if (iface_status == IFSTATUS_DOWN)
delay_time += G.delay_down;
#if 0 /* if you are back in 1970... */
if (delay_time == 0) {
sleep(1);
delay_time = 1;
}
#endif
}
}
if (delay_time && (int)(monotonic_sec() - delay_time) >= 0) {
if (run_script(iface_status_str) != 0)
goto exiting;
delay_time = 0;
}
} /* while (1) */
cleanup:
if (!(opts & FLAG_NO_SHUTDOWN)
&& (iface_status == IFSTATUS_UP
|| (iface_status == IFSTATUS_DOWN && delay_time)
)
) {
setenv(IFPLUGD_ENV_PREVIOUS, strstatus(iface_status), 1);
setenv(IFPLUGD_ENV_CURRENT, strstatus(-1), 1);
run_script("down\0up"); /* reusing string */
}
exiting:
remove_pidfile(pidfile_name);
libbb: reduce the overhead of single parameter bb_error_msg() calls Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:05:03 +05:30
bb_simple_error_msg_and_die("exiting");
}