busybox/util-linux/fdformat.c

/* vi: set sw=4 ts=4: */
/* fdformat.c  -  Low-level formats a floppy disk - Werner Almesberger */

/* 1999-02-22 Arkadiusz Mi<4D>kiewicz <misiek@pld.ORG.PL>
 * - added Native Language Support
 * 1999-03-20 Arnaldo Carvalho de Melo <acme@conectiva.com.br>
 * - more i18n/nls translatable strings marked
 *
 * 5 July 2003 -- modified for Busybox by Erik Andersen
 */

#include <stdio.h>
#include <string.h>
#include <fcntl.h>
#include <errno.h>
#include <unistd.h>
#include <stdlib.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include "busybox.h"


/* Stuff extracted from linux/fd.h */
struct floppy_struct {
	unsigned int	size,		/* nr of sectors total */
			sect,		/* sectors per track */
			head,		/* nr of heads */
			track,		/* nr of tracks */
			stretch;	/* !=0 means double track steps */
#define FD_STRETCH 1
#define FD_SWAPSIDES 2

	unsigned char	gap,		/* gap1 size */

			rate,		/* data rate. |= 0x40 for perpendicular */
#define FD_2M 0x4
#define FD_SIZECODEMASK 0x38
#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)
#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \
			     512 : 128 << FD_SIZECODE(floppy) )
#define FD_PERP 0x40

			spec1,		/* stepping rate, head unload time */
			fmt_gap;	/* gap2 size */
	const char	* name; /* used only for predefined formats */
};
struct format_descr {
	unsigned int device,head,track;
};
#define FDFMTBEG _IO(2,0x47)
#define	FDFMTTRK _IOW(2,0x48, struct format_descr)
#define FDFMTEND _IO(2,0x49)
#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
#define FD_FILL_BYTE 0xF6 /* format fill byte. */

static void print_and_flush(const char * __restrict format, ...)
{
	va_list arg;

	va_start(arg, format);
	bb_vfprintf(stdout, format, arg);
	va_end(arg);
	bb_xfflush_stdout();
}

static void bb_xioctl(int fd, int request, void *argp, const char *string)
{
	if (ioctl (fd, request, argp) < 0) {
		bb_perror_msg_and_die(string);
	}
}

int fdformat_main(int argc,char **argv)
{
	int fd, n, cyl, read_bytes, verify;
	unsigned char *data;
	struct stat st;
	struct floppy_struct param;
	struct format_descr descr;

	if (argc < 2) {
		bb_show_usage();
	}
	verify = !bb_getopt_ulflags(argc, argv, "n");
	argv += optind;

	/* R_OK is needed for verifying */
	if (stat(*argv,&st) < 0 || access(*argv,W_OK | R_OK ) < 0) {
		bb_perror_msg_and_die("%s",*argv);
	}
	if (!S_ISBLK(st.st_mode)) {
		bb_error_msg_and_die("%s: not a block device",*argv);
		/* do not test major - perhaps this was an USB floppy */
	}


	/* O_RDWR for formatting and verifying */
	fd = bb_xopen(*argv,O_RDWR );

	bb_xioctl(fd, FDGETPRM, &param, "FDGETPRM");/*original message was: "Could not determine current format type" */

	print_and_flush("%s-sided, %d tracks, %d sec/track. Total capacity %d kB.\n",
		(param.head == 2) ? "Double" : "Single",
		param.track, param.sect, param.size >> 1);

	/* FORMAT */
	print_and_flush("Formatting ... ", NULL);
	bb_xioctl(fd, FDFMTBEG,NULL,"FDFMTBEG");

	/* n == track */
	for (n = 0; n < param.track; n++)
	{
	    descr.head = 0;
	    descr.track = n;
	    bb_xioctl(fd, FDFMTTRK,&descr,"FDFMTTRK");
	    print_and_flush("%3d\b\b\b", n);
	    if (param.head == 2) {
		descr.head = 1;
		bb_xioctl(fd, FDFMTTRK,&descr,"FDFMTTRK");
	    }
	}

	bb_xioctl(fd,FDFMTEND,NULL,"FDFMTEND");
	print_and_flush("done\n", NULL);

	/* VERIFY */
	if(verify) {
		/* n == cyl_size */
		n = param.sect*param.head*512;

		data = xmalloc(n);
		print_and_flush("Verifying ... ", NULL);
		for (cyl = 0; cyl < param.track; cyl++) {
			print_and_flush("%3d\b\b\b", cyl);
			if((read_bytes = safe_read(fd,data,n))!= n ) {
				if(read_bytes < 0) {
					bb_perror_msg(bb_msg_read_error);
				}
				bb_error_msg_and_die("Problem reading cylinder %d, expected %d, read %d", cyl, n, read_bytes);
			}
			/* Check backwards so we don't need a counter */
			while(--read_bytes>=0) {
				if( data[read_bytes] != FD_FILL_BYTE) {
					 print_and_flush("bad data in cyl %d\nContinuing ... ",cyl);
				}
			}
		}
		/* There is no point in freeing blocks at the end of a program, because
		all of the program's space is given back to the system when the process
		terminates.*/

		if (ENABLE_FEATURE_CLEAN_UP) free(data);

		print_and_flush("done\n", NULL);
	}

	if (ENABLE_FEATURE_CLEAN_UP) close(fd);

	/* Don't bother closing.  Exit does
	 * that, so we can save a few bytes */
	return EXIT_SUCCESS;
}