*: remove "Options:" string from help texts

function                                             old     new   delta
packed_usage                                       28706   28623     -83

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

miscutils/adjtimex.c

@@ -15,7 +15,6 @@
 //usage:       "[-q] [-o OFF] [-f FREQ] [-p TCONST] [-t TICK]"
 //usage:#define adjtimex_full_usage "\n\n"
 //usage:       "Read and optionally set system timebase parameters. See adjtimex(2)\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-q	Quiet"
 //usage:     "\n	-o OFF	Time offset, microseconds"
 //usage:     "\n	-f FREQ	Frequency adjust, integer kernel units (65536 is 1ppm)"

miscutils/beep.c

@@ -11,8 +11,7 @@
 //usage:#define beep_trivial_usage
 //usage:       "-f FREQ -l LEN -d DELAY -r COUNT -n"
 //usage:#define beep_full_usage "\n\n"
-//usage:       "Options:"
-//usage:     "\n	-f	Frequency in Hz"
+//usage:       "	-f	Frequency in Hz"
 //usage:     "\n	-l	Length in ms"
 //usage:     "\n	-d	Delay in ms"
 //usage:     "\n	-r	Repetitions"

miscutils/chrt.c

@@ -10,7 +10,6 @@
 //usage:       "[-prfom] [PRIO] [PID | PROG ARGS]"
 //usage:#define chrt_full_usage "\n\n"
 //usage:       "Change scheduling priority and class for a process\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-p	Operate on PID"
 //usage:     "\n	-r	Set SCHED_RR class"
 //usage:     "\n	-f	Set SCHED_FIFO class"

miscutils/conspy.c

@@ -30,7 +30,6 @@
 //usage:     "A text-mode VNC like program for Linux virtual consoles."
 //usage:     "\nTo exit, quickly press ESC 3 times."
 //usage:     "\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-v	Don't send keystrokes to the console"
 //usage:     "\n	-c	Create missing devices in /dev"
 //usage:     "\n	-s	Open a SHELL session"

miscutils/devfsd.c

@@ -58,7 +58,6 @@
 //usage:       "mntpnt [-v]" IF_DEVFSD_FG_NP("[-fg][-np]")
 //usage:#define devfsd_full_usage "\n\n"
 //usage:       "Manage devfs permissions and old device name symlinks\n"
-//usage:     "\nOptions:"
 //usage:     "\n	mntpnt	The mount point where devfs is mounted"
 //usage:     "\n	-v	Print the protocol version numbers for devfsd"
 //usage:     "\n		and the kernel-side protocol version and exit"

miscutils/eject.c

@@ -17,7 +17,6 @@
 //usage:       "[-t] [-T] [DEVICE]"
 //usage:#define eject_full_usage "\n\n"
 //usage:       "Eject DEVICE or default /dev/cdrom\n"
-//usage:     "\nOptions:"
 //usage:	IF_FEATURE_EJECT_SCSI(
 //usage:     "\n	-s	SCSI device"
 //usage:	)

miscutils/fbsplash.c

@@ -24,8 +24,7 @@
 //usage:#define fbsplash_trivial_usage
 //usage:       "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]"
 //usage:#define fbsplash_full_usage "\n\n"
-//usage:       "Options:"
-//usage:     "\n	-s	Image"
+//usage:       "	-s	Image"
 //usage:     "\n	-c	Hide cursor"
 //usage:     "\n	-d	Framebuffer device (default /dev/fb0)"
 //usage:     "\n	-i	Config file (var=value):"

miscutils/flash_eraseall.c

@@ -14,7 +14,6 @@
 //usage:       "[-jq] MTD_DEVICE"
 //usage:#define flash_eraseall_full_usage "\n\n"
 //usage:       "Erase an MTD device\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-j	Format the device for jffs2"
 //usage:     "\n	-q	Don't display progress messages"
 

miscutils/flashcp.c

@@ -11,7 +11,6 @@
 //usage:       "-v FILE MTD_DEVICE"
 //usage:#define flashcp_full_usage "\n\n"
 //usage:       "Copy an image to MTD device\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-v	Verbose"
 
 #include "libbb.h"

miscutils/hdparm.c

@@ -15,8 +15,7 @@
 //usage:#define hdparm_trivial_usage
 //usage:       "[OPTIONS] [DEVICE]"
 //usage:#define hdparm_full_usage "\n\n"
-//usage:       "Options:"
-//usage:     "\n	-a	Get/set fs readahead"
+//usage:       "	-a	Get/set fs readahead"
 //usage:     "\n	-A	Set drive read-lookahead flag (0/1)"
 //usage:     "\n	-b	Get/set bus state (0 == off, 1 == on, 2 == tristate)"
 //usage:     "\n	-B	Set Advanced Power Management setting (1-255)"

miscutils/ionice.c

@@ -11,7 +11,6 @@
 //usage:	"[-c 1-3] [-n 0-7] [-p PID] [PROG]"
 //usage:#define ionice_full_usage "\n\n"
 //usage:       "Change I/O priority and class\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-c	Class. 1:realtime 2:best-effort 3:idle"
 //usage:     "\n	-n	Priority"
 

miscutils/last.c

@@ -12,7 +12,6 @@
 //usage:#define last_full_usage "\n\n"
 //usage:       "Show listing of the last users that logged into the system"
 //usage:	IF_FEATURE_LAST_FANCY( "\n"
-//usage:     "\nOptions:"
 /* //usage:  "\n	-H	Show header line" */
 //usage:     "\n	-W	Display with no host column truncation"
 //usage:     "\n	-f FILE Read from FILE instead of /var/log/wtmp"

miscutils/less.c

@@ -25,7 +25,6 @@
 //usage:       "[-EMNmh~I?] [FILE]..."
 //usage:#define less_full_usage "\n\n"
 //usage:       "View FILE (or stdin) one screenful at a time\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-E	Quit once the end of a file is reached"
 //usage:     "\n	-M,-m	Display status line with line numbers"
 //usage:     "\n		and percentage through the file"

miscutils/man.c

@@ -7,8 +7,7 @@
 //usage:       "[-aw] [MANPAGE]..."
 //usage:#define man_full_usage "\n\n"
 //usage:       "Format and display manual page\n"
-//usage:     "\nOptions:"
-//usage:     "\n	-a      Display all pages"
+//usage:     "\n	-a	Display all pages"
 //usage:     "\n	-w	Show page locations"
 
 #include "libbb.h"

miscutils/microcom.c

@@ -12,7 +12,6 @@
 //usage:       "[-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY"
 //usage:#define microcom_full_usage "\n\n"
 //usage:       "Copy bytes for stdin to TTY and from TTY to stdout\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-d	Wait up to DELAY ms for TTY output before sending every"
 //usage:     "\n		next byte to it"
 //usage:     "\n	-t	Exit if both stdin and TTY are silent for TIMEOUT ms"

miscutils/mountpoint.c

@@ -13,7 +13,6 @@
 //usage:       "[-q] <[-dn] DIR | -x DEVICE>"
 //usage:#define mountpoint_full_usage "\n\n"
 //usage:       "Check if the directory is a mountpoint\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-q	Quiet"
 //usage:     "\n	-d	Print major/minor device number of the filesystem"
 //usage:     "\n	-n	Print device name of the filesystem"

miscutils/nandwrite.c

@@ -32,7 +32,6 @@
 //usage:	"[-p] [-s ADDR] MTD_DEVICE [FILE]"
 //usage:#define nandwrite_full_usage "\n\n"
 //usage:	"Write to the specified MTD device\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-p	Pad to page size"
 //usage:     "\n	-s ADDR	Start address"
 
@@ -40,7 +39,6 @@
 //usage:	"[-o] [-b] [-s ADDR] [-f FILE] MTD_DEVICE"
 //usage:#define nanddump_full_usage "\n\n"
 //usage:	"Dump the sepcified MTD device\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-o	Omit oob data"
 //usage:     "\n	-b	Omit bad block from the dump"
 //usage:     "\n	-s ADDR	Start address"

miscutils/setserial.c

@@ -212,8 +212,8 @@ struct serial_struct {
 //usage:#define setserial_trivial_usage
 //usage:	"[-gabGvzV] DEVICE [PARAMETER [ARG]]..."
 //usage:#define setserial_full_usage "\n\n"
-//usage:	"Request or set Linux serial port information\n\n"
-//usage:	"Options:\n"
+//usage:	"Request or set Linux serial port information\n"
+//usage:	"\n"
 //usage:	"	-g	Interpret parameters as list of devices for reporting"
 //usage:	"	-a	Print all available information\n"
 //usage:	"	-b	Print summary information\n"

miscutils/strings.c

@@ -11,7 +11,6 @@
 //usage:       "[-afo] [-n LEN] [FILE]..."
 //usage:#define strings_full_usage "\n\n"
 //usage:       "Display printable strings in a binary file\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-a	Scan whole file (default)"
 //usage:     "\n	-f	Precede strings with filenames"
 //usage:     "\n	-n LEN	At least LEN characters form a string (default 4)"

miscutils/taskset.c

@@ -10,7 +10,6 @@
 //usage:       "[-p] [MASK] [PID | PROG ARGS]"
 //usage:#define taskset_full_usage "\n\n"
 //usage:       "Set or get CPU affinity\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-p	Operate on an existing PID"
 //usage:
 //usage:#define taskset_example_usage

miscutils/time.c

@@ -13,7 +13,6 @@
 //usage:       "[-v] PROG ARGS"
 //usage:#define time_full_usage "\n\n"
 //usage:       "Run PROG, display resource usage when it exits\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-v	Verbose"
 
 #include "libbb.h"

miscutils/ubi_tools.c

@@ -81,7 +81,6 @@
 //usage:       "-m MTD_NUM [-d UBI_NUM] UBI_CTRL_DEV"
 //usage:#define ubiattach_full_usage "\n\n"
 //usage:       "Attach MTD device to UBI\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-m MTD_NUM	MTD device number to attach"
 //usage:     "\n	-d UBI_NUM	UBI device number to assign"
 //usage:
@@ -89,14 +88,12 @@
 //usage:       "-d UBI_NUM UBI_CTRL_DEV"
 //usage:#define ubidetach_full_usage "\n\n"
 //usage:       "Detach MTD device from UBI\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-d UBI_NUM	UBI device number"
 //usage:
 //usage:#define ubimkvol_trivial_usage
 //usage:       "UBI_DEVICE -N NAME -s SIZE"
 //usage:#define ubimkvol_full_usage "\n\n"
 //usage:       "Create UBI volume\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-a ALIGNMENT	Volume alignment (default 1)"
 //usage:     "\n	-n VOLID	Volume ID, if not specified, it"
 //usage:     "\n			will be assigned automatically"
@@ -108,14 +105,12 @@
 //usage:       "UBI_DEVICE -n VOLID"
 //usage:#define ubirmvol_full_usage "\n\n"
 //usage:       "Remove UBI volume\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-n VOLID	Volume ID"
 //usage:
 //usage:#define ubirsvol_trivial_usage
 //usage:       "UBI_DEVICE -n VOLID -s SIZE"
 //usage:#define ubirsvol_full_usage "\n\n"
 //usage:       "Resize UBI volume\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-n VOLID	Volume ID to resize"
 //usage:     "\n	-s SIZE		Size in bytes"
 //usage:
@@ -123,9 +118,8 @@
 //usage:       "UBI_DEVICE [IMG_FILE]"
 //usage:#define ubiupdatevol_full_usage "\n\n"
 //usage:       "Update UBI volume\n"
-//usage:     "\nOptions:"
-//usage:     "\n      -t      Truncate UBI volume"
-//usage:     "\n      -s SIZE Bytes in input (if reading stdin)"
+//usage:     "\n	-t	Truncate UBI volume"
+//usage:     "\n	-s SIZE	Bytes in input (if reading stdin)"
 
 
 int ubi_tools_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;

miscutils/watchdog.c

@@ -13,7 +13,6 @@
 //usage:       "[-t N[ms]] [-T N[ms]] [-F] DEV"
 //usage:#define watchdog_full_usage "\n\n"
 //usage:       "Periodically write to watchdog device DEV\n"
-//usage:     "\nOptions:"
 //usage:     "\n	-T N	Reboot after N seconds if not reset (default 60)"
 //usage:     "\n	-t N	Reset every N seconds (default 30)"
 //usage:     "\n	-F	Run in foreground"