build system overhaul

modutils/Config.in

@@ -5,24 +5,24 @@
 
 menu "Linux Module Utilities"
 
-config CONFIG_INSMOD
+config INSMOD
 	bool "insmod"
 	default n
 	help
 	  insmod is used to load specified modules in the running kernel.
 
-config CONFIG_FEATURE_INSMOD_VERSION_CHECKING
+config FEATURE_INSMOD_VERSION_CHECKING
 	bool "Module version checking"
 	default n
-	depends on CONFIG_INSMOD && CONFIG_FEATURE_2_4_MODULES
+	depends on INSMOD && FEATURE_2_4_MODULES
 	help
 	  Support checking of versions for modules.  This is used to
 	  ensure that the kernel and module are made for each other.
 
-config CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS
+config FEATURE_INSMOD_KSYMOOPS_SYMBOLS
 	bool "Add module symbols to kernel symbol table"
 	default n
-	depends on CONFIG_INSMOD && CONFIG_FEATURE_2_4_MODULES
+	depends on INSMOD && FEATURE_2_4_MODULES
 	help
 	  By adding module symbols to the kernel symbol table, Oops messages
 	  occuring within kernel modules can be properly debugged.  By enabling
@@ -30,20 +30,20 @@ config CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS
 	  table for properly debugging support.  If you are not interested in
 	  Oops messages from kernel modules, say N.
 
-config CONFIG_FEATURE_INSMOD_LOADINKMEM
+config FEATURE_INSMOD_LOADINKMEM
 	bool "In kernel memory optimization (uClinux only)"
 	default n
-	depends on CONFIG_INSMOD && CONFIG_FEATURE_2_4_MODULES
+	depends on INSMOD && FEATURE_2_4_MODULES
 	help
 	  This is a special uClinux only memory optimization that lets insmod
 	  load the specified kernel module directly into kernel space, reducing
 	  memory usage by preventing the need for two copies of the module
 	  being loaded into memory.
 
-config CONFIG_FEATURE_INSMOD_LOAD_MAP
+config FEATURE_INSMOD_LOAD_MAP
 	bool "Enable load map (-m) option"
 	default n
-	depends on CONFIG_INSMOD && CONFIG_FEATURE_2_4_MODULES
+	depends on INSMOD && FEATURE_2_4_MODULES
 	help
 	  Enabling this, one would be able to get a load map
 	  output on stdout. This makes kernel module debugging
@@ -51,36 +51,36 @@ config CONFIG_FEATURE_INSMOD_LOAD_MAP
 	  If you don't plan to debug kernel modules, you
 	  don't need this option.
 
-config CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL
+config FEATURE_INSMOD_LOAD_MAP_FULL
 	bool "Symbols in load map"
 	default y
-	depends on CONFIG_FEATURE_INSMOD_LOAD_MAP
+	depends on FEATURE_INSMOD_LOAD_MAP
 	help
 	  Without this option, -m will only output section
 	  load map.  With this option, -m will also output
 	  symbols load map.
 
-config CONFIG_RMMOD
+config RMMOD
 	bool "rmmod"
 	default n
 	help
 	  rmmod is used to unload specified modules from the kernel.
 
-config CONFIG_LSMOD
+config LSMOD
 	bool "lsmod"
 	default n
 	help
 	  lsmod is used to display a list of loaded modules.
 
-config CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT
+config FEATURE_LSMOD_PRETTY_2_6_OUTPUT
 	bool "lsmod pretty output for 2.6.x Linux kernels "
 	default n
-	depends on CONFIG_LSMOD
+	depends on LSMOD
 	help
 	  This option makes output format of lsmod adjusted to
 	  the format of module-init-tools for Linux kernel 2.6.
 
-config CONFIG_MODPROBE
+config MODPROBE
 	bool "modprobe"
 	default n
 	help
@@ -90,11 +90,11 @@ config CONFIG_MODPROBE
 	  Note that in the state, modprobe does not understand multiple
 	  module options from the configuration file. See option below.
 
-config CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS
+config FEATURE_MODPROBE_MULTIPLE_OPTIONS
 	bool
-	prompt "Multiple options parsing" if CONFIG_NITPICK
+	prompt "Multiple options parsing" if NITPICK
 	default y
-	depends on CONFIG_MODPROBE
+	depends on MODPROBE
 	help
 	  Allow modprobe to understand more than one option to pass to
 	  modules.
@@ -107,51 +107,51 @@ config CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS
 	  Saying Y here is not a bad idea if you're not that short
 	  on storage capacity.
 
-config CONFIG_FEATURE_MODPROBE_FANCY_ALIAS
+config FEATURE_MODPROBE_FANCY_ALIAS
 	bool
-	prompt "Fancy alias parsing" if CONFIG_NITPICK
+	prompt "Fancy alias parsing" if NITPICK
 	default y
-	depends on CONFIG_MODPROBE && CONFIG_FEATURE_2_6_MODULES
+	depends on MODPROBE && FEATURE_2_6_MODULES
 	help
 	  Say 'y' here to enable parsing of aliases with underscore/dash
 	  mismatch between module name and file name, along with bus-specific
 	  aliases (such as pci:... or usb:... aliases).
 
 comment "Options common to multiple modutils"
-	depends on CONFIG_INSMOD || CONFIG_RMMOD || CONFIG_MODPROBE || CONFIG_LSMOD
+	depends on INSMOD || RMMOD || MODPROBE || LSMOD
 
-config CONFIG_FEATURE_CHECK_TAINTED_MODULE
+config FEATURE_CHECK_TAINTED_MODULE
 	# Simulate indentation
 	bool "Support tainted module checking with new kernels"
 	default y
-	depends on CONFIG_INSMOD || CONFIG_LSMOD
+	depends on INSMOD || LSMOD
 	help
 	  Support checking for tainted modules.  These are usually binary
 	  only modules that will make the linux-kernel list ignore your
 	  support request.
 	  This option is required to support GPLONLY modules.
 
-config CONFIG_FEATURE_2_4_MODULES
+config FEATURE_2_4_MODULES
 	# Simulate indentation
 	bool "Support version 2.2.x to 2.4.x Linux kernels"
 	default y
-	depends on CONFIG_INSMOD || CONFIG_RMMOD
+	depends on INSMOD || RMMOD
 	help
 	  Support module loading for 2.2.x and 2.4.x Linux kernels.
 
-config CONFIG_FEATURE_2_6_MODULES
+config FEATURE_2_6_MODULES
 	# Simulate indentation
 	bool "Support version 2.6.x Linux kernels"
 	default y
-	depends on CONFIG_INSMOD || CONFIG_RMMOD || CONFIG_MODPROBE
+	depends on INSMOD || RMMOD || MODPROBE
 	help
 	  Support module loading for newer 2.6.x Linux kernels.
 
 
-config CONFIG_FEATURE_QUERY_MODULE_INTERFACE
+config FEATURE_QUERY_MODULE_INTERFACE
 	bool
 	default y
-	depends on CONFIG_FEATURE_2_4_MODULES && !CONFIG_FEATURE_2_6_MODULES
+	depends on FEATURE_2_4_MODULES && !FEATURE_2_6_MODULES
 
 
 endmenu