Remove "select PLATFORM_LINUX"

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

console-tools/loadfont.c

@@ -12,7 +12,6 @@
 //config:config LOADFONT
 //config:	bool "loadfont (5.2 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	This program loads a console font from standard input.
 //config:

console-tools/openvt.c

@@ -10,7 +10,6 @@
 //config:config OPENVT
 //config:	bool "openvt (7.2 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	This program is used to start a command on an unused
 //config:	virtual terminal.

klibc-utils/run-init.c

@@ -8,7 +8,6 @@
 //config:config RUN_INIT
 //config:	bool "run-init (7.7 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	The run-init utility is used from initramfs to select a new
 //config:	root device. Under initramfs, you have to use this instead of

miscutils/adjtimex.c

@@ -13,7 +13,6 @@
 //config:config ADJTIMEX
 //config:	bool "adjtimex (4.7 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Adjtimex reads and optionally sets adjustment parameters for
 //config:	the Linux clock adjustment algorithm.

miscutils/i2c_tools.c

@@ -11,35 +11,30 @@
 //config:config I2CGET
 //config:	bool "i2cget (5.5 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Read from I2C/SMBus chip registers.
 //config:
 //config:config I2CSET
 //config:	bool "i2cset (6.7 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Set I2C registers.
 //config:
 //config:config I2CDUMP
 //config:	bool "i2cdump (7.1 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Examine I2C registers.
 //config:
 //config:config I2CDETECT
 //config:	bool "i2cdetect (7.1 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Detect I2C chips.
 //config:
 //config:config I2CTRANSFER
 //config:	bool "i2ctransfer (4.0 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Send user-defined I2C messages in one transfer.
 //config:

miscutils/partprobe.c

@@ -7,7 +7,6 @@
 //config:config PARTPROBE
 //config:	bool "partprobe (3.5 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Ask kernel to rescan partition table.
 

miscutils/ubirename.c

@@ -9,7 +9,6 @@
 //config:config UBIRENAME
 //config:	bool "ubirename (2.4 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Utility to rename UBI volumes
 

miscutils/watchdog.c

@@ -11,7 +11,6 @@
 //config:config WATCHDOG
 //config:	bool "watchdog (5.3 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	The watchdog utility is used with hardware or software watchdog
 //config:	device drivers. It opens the specified watchdog device special file

modutils/Config.src

@@ -8,7 +8,6 @@ menu "Linux Module Utilities"
 config MODPROBE_SMALL
 	bool "Simplified modutils"
 	default y
-	select PLATFORM_LINUX
 	help
 	Build smaller (~1.5 kbytes), simplified module tools.
 

modutils/depmod.c

@@ -10,7 +10,6 @@
 //config:config DEPMOD
 //config:	bool "depmod (27 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	depmod generates modules.dep (and potentially modules.alias
 //config:	and modules.symbols) that contain dependency information

modutils/insmod.c

@@ -9,7 +9,6 @@
 //config:config INSMOD
 //config:	bool "insmod (22 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	insmod is used to load specified modules in the running kernel.
 

modutils/lsmod.c

@@ -10,7 +10,6 @@
 //config:config LSMOD
 //config:	bool "lsmod (1.9 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	lsmod is used to display a list of loaded modules.
 //config:

modutils/modinfo.c

@@ -8,7 +8,6 @@
 //config:config MODINFO
 //config:	bool "modinfo (24 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Show information about a Linux Kernel module
 

modutils/modprobe.c

@@ -10,7 +10,6 @@
 //config:config MODPROBE
 //config:	bool "modprobe (28 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Handle the loading of modules, and their dependencies on a high
 //config:	level.

modutils/rmmod.c

@@ -10,7 +10,6 @@
 //config:config RMMOD
 //config:	bool "rmmod (3.3 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	rmmod is used to unload specified modules from the kernel.
 

networking/arp.c

@@ -15,7 +15,6 @@
 //config:config ARP
 //config:	bool "arp (10 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Manipulate the system ARP cache.
 

networking/arping.c

@@ -8,7 +8,6 @@
 //config:config ARPING
 //config:	bool "arping (9 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Ping hosts by ARP packets.
 

networking/brctl.c

@@ -12,7 +12,6 @@
 //config:config BRCTL
 //config:	bool "brctl (4.7 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Manage ethernet bridges.
 //config:	Supports addbr/delbr and addif/delif.

networking/ifconfig.c

@@ -27,7 +27,6 @@
 //config:config IFCONFIG
 //config:	bool "ifconfig (12 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Ifconfig is used to configure the kernel-resident network interfaces.
 //config:

networking/ifplugd.c

@@ -9,7 +9,6 @@
 //config:config IFPLUGD
 //config:	bool "ifplugd (10 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Network interface plug detection daemon.
 

networking/ip.c

@@ -11,7 +11,6 @@
 //config:config IP
 //config:	bool "ip (35 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	The "ip" applet is a TCP/IP interface configuration and routing
 //config:	utility.
@@ -22,7 +21,6 @@
 //config:config IPADDR
 //config:	bool "ipaddr (14 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	select FEATURE_IP_ADDRESS
 //config:	help
 //config:	Short form of "ip addr"
@@ -30,7 +28,6 @@
 //config:config IPLINK
 //config:	bool "iplink (17 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	select FEATURE_IP_LINK
 //config:	help
 //config:	Short form of "ip link"
@@ -38,7 +35,6 @@
 //config:config IPROUTE
 //config:	bool "iproute (15 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	select FEATURE_IP_ROUTE
 //config:	help
 //config:	Short form of "ip route"
@@ -53,7 +49,6 @@
 //config:config IPRULE
 //config:	bool "iprule (10 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	select FEATURE_IP_RULE
 //config:	help
 //config:	Short form of "ip rule"
@@ -61,7 +56,6 @@
 //config:config IPNEIGH
 //config:	bool "ipneigh (8.3 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	select FEATURE_IP_NEIGH
 //config:	help
 //config:	Short form of "ip neigh"

networking/nameif.c

@@ -12,7 +12,6 @@
 //config:config NAMEIF
 //config:	bool "nameif (6.6 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	select FEATURE_SYSLOG
 //config:	help
 //config:	nameif is used to rename network interface by its MAC address.

networking/route.c

@@ -27,7 +27,6 @@
 //config:config ROUTE
 //config:	bool "route (8.7 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Route displays or manipulates the kernel's IP routing tables.
 

networking/tc.c

@@ -9,7 +9,6 @@
 //config:config TC
 //config:	bool "tc (8.3 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Show / manipulate traffic control settings
 //config:

networking/traceroute.c

@@ -963,10 +963,8 @@ traceroute_init(int op, char **argv)
 	if (af == AF_INET) {
 		xmove_fd(xsocket(AF_INET, SOCK_RAW, IPPROTO_ICMP), rcvsock);
 #if ENABLE_FEATURE_TRACEROUTE_VERBOSE
-# ifdef IP_PKTINFO
 		/* want recvmsg to report target local address (for -v) */
 		setsockopt_1(rcvsock, IPPROTO_IP, IP_PKTINFO);
-# endif
 #endif
 	}
 #if ENABLE_TRACEROUTE6

networking/tunctl.c

@@ -12,7 +12,6 @@
 //config:config TUNCTL
 //config:	bool "tunctl (6.2 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	tunctl creates or deletes tun devices.
 //config:

networking/udhcp/Config.src

@@ -6,7 +6,6 @@
 config UDHCPD
 	bool "udhcpd (21 kb)"
 	default y
-	select PLATFORM_LINUX
 	help
 	udhcpd is a DHCP server geared primarily toward embedded systems,
 	while striving to be fully functional and RFC compliant.
@@ -54,7 +53,6 @@ config DUMPLEASES
 config DHCPRELAY
 	bool "dhcprelay (5.2 kb)"
 	default y
-	select PLATFORM_LINUX
 	help
 	dhcprelay listens for DHCP requests on one or more interfaces
 	and forwards these requests to a different interface or DHCP
@@ -63,7 +61,6 @@ config DHCPRELAY
 config UDHCPC
 	bool "udhcpc (24 kb)"
 	default y
-	select PLATFORM_LINUX
 	help
 	udhcpc is a DHCP client geared primarily toward embedded systems,
 	while striving to be fully functional and RFC compliant.

procps/free.c

@@ -9,7 +9,6 @@
 //config:config FREE
 //config:	bool "free (3.1 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	free displays the total amount of free and used physical and swap
 //config:	memory in the system, as well as the buffers used by the kernel.

procps/uptime.c

@@ -14,7 +14,6 @@
 //config:config UPTIME
 //config:	bool "uptime (3.7 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	uptime gives a one line display of the current time, how long
 //config:	the system has been running, how many users are currently logged

sysklogd/klogd.c

@@ -19,7 +19,6 @@
 //config:config KLOGD
 //config:	bool "klogd (5.7 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	klogd is a utility which intercepts and logs all
 //config:	messages from the Linux kernel and sends the messages

util-linux/acpid.c

@@ -9,7 +9,6 @@
 //config:config ACPID
 //config:	bool "acpid (9 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	acpid listens to ACPI events coming either in textual form from
 //config:	/proc/acpi/event (though it is marked deprecated it is still widely

util-linux/blkdiscard.c

@@ -8,7 +8,6 @@
 //config:config BLKDISCARD
 //config:	bool "blkdiscard (4.3 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	blkdiscard discards sectors on a given device.
 

util-linux/blkid.c

@@ -9,7 +9,6 @@
 //config:config BLKID
 //config:	bool "blkid (12 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	select VOLUMEID
 //config:	help
 //config:	Lists labels and UUIDs of all filesystems.

util-linux/dmesg.c

@@ -11,7 +11,6 @@
 //config:config DMESG
 //config:	bool "dmesg (3.7 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	dmesg is used to examine or control the kernel ring buffer. When the
 //config:	Linux kernel prints messages to the system log, they are stored in

util-linux/fdisk.c

@@ -10,7 +10,6 @@
 //config:config FDISK
 //config:	bool "fdisk (37 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	The fdisk utility is used to divide hard disks into one or more
 //config:	logical disks, which are generally called partitions. This utility

util-linux/findfs.c

@@ -10,7 +10,6 @@
 //config:config FINDFS
 //config:	bool "findfs (12 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	select VOLUMEID
 //config:	help
 //config:	Prints the name of a filesystem with given label or UUID.

util-linux/freeramdisk.c

@@ -11,7 +11,6 @@
 //config:config FDFLUSH
 //config:	bool "fdflush (1.3 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	fdflush is only needed when changing media on slightly-broken
 //config:	removable media drives. It is used to make Linux believe that a
@@ -24,7 +23,6 @@
 //config:config FREERAMDISK
 //config:	bool "freeramdisk (1.3 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Linux allows you to create ramdisks. This utility allows you to
 //config:	delete them and completely free all memory that was used for the

util-linux/fsfreeze.c

@@ -7,7 +7,6 @@
 //config:config FSFREEZE
 //config:	bool "fsfreeze (3.5 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	select LONG_OPTS
 //config:	help
 //config:	Halt new accesses and flush writes on a mounted filesystem.

util-linux/fstrim.c

@@ -10,7 +10,6 @@
 //config:config FSTRIM
 //config:	bool "fstrim (4.4 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Discard unused blocks on a mounted filesystem.
 

util-linux/hwclock.c

@@ -9,7 +9,6 @@
 //config:config HWCLOCK
 //config:	bool "hwclock (5.8 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	The hwclock utility is used to read and set the hardware clock
 //config:	on a system. This is primarily used to set the current time on

util-linux/ionice.c

@@ -9,7 +9,6 @@
 //config:config IONICE
 //config:	bool "ionice (3.8 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Set/set program io scheduling class and priority
 //config:	Requires kernel >= 2.6.13

util-linux/losetup.c

@@ -9,7 +9,6 @@
 //config:config LOSETUP
 //config:	bool "losetup (5.5 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	losetup is used to associate or detach a loop device with a regular
 //config:	file or block device, and to query the status of a loop device. This

util-linux/mdev.c

@@ -10,7 +10,6 @@
 //config:config MDEV
 //config:	bool "mdev (17 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	mdev is a mini-udev implementation for dynamically creating device
 //config:	nodes in the /dev directory.

util-linux/mkfs_ext2.c

@@ -10,7 +10,6 @@
 //config:config MKE2FS
 //config:	bool "mke2fs (10 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Utility to create EXT2 filesystems.
 //config:

util-linux/mkfs_vfat.c

@@ -10,7 +10,6 @@
 //config:config MKDOSFS
 //config:	bool "mkdosfs (7.2 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Utility to create FAT32 filesystems.
 //config:

util-linux/mount.c

@@ -20,7 +20,6 @@
 //config:config MOUNT
 //config:	bool "mount (23 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	All files and filesystems in Unix are arranged into one big directory
 //config:	tree. The 'mount' utility is used to graft a filesystem onto a

util-linux/nsenter.c

@@ -9,7 +9,6 @@
 //config:config NSENTER
 //config:	bool "nsenter (6.5 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Run program with namespaces of other processes.
 

util-linux/pivot_root.c

@@ -11,7 +11,6 @@
 //config:config PIVOT_ROOT
 //config:	bool "pivot_root (1.1 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	The pivot_root utility swaps the mount points for the root filesystem
 //config:	with some other mounted filesystem. This allows you to do all sorts

util-linux/setarch.c

@@ -9,7 +9,6 @@
 //config:config SETARCH
 //config:	bool "setarch (3.6 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	The linux32 utility is used to create a 32bit environment for the
 //config:	specified program (usually a shell). It only makes sense to have
@@ -19,14 +18,12 @@
 //config:config LINUX32
 //config:	bool "linux32 (3.3 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Alias to "setarch linux32".
 //config:
 //config:config LINUX64
 //config:	bool "linux64 (3.3 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Alias to "setarch linux64".
 

util-linux/setpriv.c

@@ -9,7 +9,6 @@
 //config:config SETPRIV
 //config:	bool "setpriv (6.6 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	select LONG_OPTS
 //config:	help
 //config:	Run a program with different Linux privilege settings.

util-linux/swaponoff.c

@@ -9,7 +9,6 @@
 //config:config SWAPON
 //config:	bool "swapon (15 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	Once you have created some swap space using 'mkswap', you also need
 //config:	to enable your swap space with the 'swapon' utility. The 'swapoff'
@@ -36,7 +35,6 @@
 //config:config SWAPOFF
 //config:	bool "swapoff (14 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:
 //config:config FEATURE_SWAPONOFF_LABEL
 //config:	bool "Support specifying devices by label or UUID"

util-linux/switch_root.c

@@ -9,7 +9,6 @@
 //config:config SWITCH_ROOT
 //config:	bool "switch_root (5.5 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	The switch_root utility is used from initramfs to select a new
 //config:	root device. Under initramfs, you have to use this instead of

util-linux/uevent.c

@@ -6,7 +6,6 @@
 //config:config UEVENT
 //config:	bool "uevent (3.1 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	help
 //config:	uevent is a netlink listener for kernel uevent notifications
 //config:	sent via netlink. It is usually used for dynamic device creation.

util-linux/unshare.c

@@ -9,7 +9,6 @@
 //config:config UNSHARE
 //config:	bool "unshare (7.2 kb)"
 //config:	default y
-//config:	select PLATFORM_LINUX
 //config:	depends on !NOMMU
 //config:	select LONG_OPTS
 //config:	help