Busybox vi provides the 'ZZ' command to save and close
the similar 'ZQ' command just exits without saving.
function old new delta
do_cmd 4222 4244 +22
Signed-off-by: Grob Grobmann <grobgrobmann@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When the 'cc' command is invoked with autoindent enabled it
should use the indent of the first line being changed.
The size of the indent has to be established before char_insert()
is called as the lines being changed are deleted. Introduce a
new global variable, newindent, to handle this. The indentcol
global is now effectively a static variable in char_insert().
function old new delta
do_cmd 4247 4308 +61
vi_main 416 422 +6
char_insert 891 875 -16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 67/-16) Total: 51 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Suppose autoindent is enabled and we have a line with an initial
tab where we want to split the words onto separate lines:
split the words
One way to do this is with the sequence 'f r<CR>;r<CR>', but in
BusyBox vi the result is:
split
he
words
This is a regression introduced by commit 9659a8db1 (vi: remove
autoindent from otherwise empty lines). The amount of indentation
is being recorded when the 'r' command inserts a newline but
isn't subsequently reset. A fix is to only record the indent
when in insert or replace mode. Proper handling of the 'o' and
'O' commands then requires them to switch to insert mode before
calling char_insert() to insert a newline.
function old new delta
char_insert 884 891 +7
do_cmd 4243 4247 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 11/0) Total: 11 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Colon and search commands are entered on the status line. Since
the cursor position wasn't being tracked backspacing over a tab
resulted in a mismatch between the actual and apparent content
of the command.
function old new delta
get_input_line 178 180 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 2/0) Total: 2 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
In replace mode ('R' command) the backspace character should get
special treatment:
- backspace only goes back to the start of the replacement;
- backspacing over replaced characters restores the original text.
Prior to this commit BusyBox vi deleted the characters both before
and after the cursor in replace mode.
function old new delta
undo_pop - 235 +235
char_insert 858 884 +26
indicate_error 81 84 +3
find_range 654 657 +3
static.text_yank 77 79 +2
do_cmd 4486 4243 -243
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 4/1 up/down: 269/-243) Total: 26 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Improved error messages:
- specify when a search fails or a mark isn't set;
- warn when line addresses are out of range or when a range of
lines is reversed.
Addresses are limited to the number of lines in the file so a
command like ':2000000000' (go to the two billionth line) no
longer causes a long pause.
Improved vi compatibility of '+' and '-' operators that aren't
followed immediately by a number:
:4+++= 7
:3-2= 1
:3 - 2= 4 (yes, really!)
In a command like ':,$' the empty address before the separator now
correctly refers to the current line. (The similar case ':1,' was
already being handled.)
And all with a tidy reduction in bloat (32-bit build):
function old new delta
colon 4029 4069 +40
.rodata 99348 99253 -95
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 40/-95) Total: -55 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Simplify the function print_literal() which is used to format a
string that may contain unprintable characters or control
characters.
- Unprintable characters were being displayed in normal text rather
than the bold used for the rest of the message. This doesn't seem
particularly helpful and it upsets the calculation of the width
of the message in show_status_line(). Use '?' rather than '.' for
unprintable characters.
- Newlines in the string were displayed as both '^J' and '$', which
is somewhat redundant.
function old new delta
not_implemented 199 108 -91
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-91) Total: -91 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The '/' and '?' search commands wrap to the other end of the buffer
if the search target isn't found. When searches are used to specify
addresses in colon commands they should do the same.
(In traditional vi and vim this behaviour is controlled by the
'wrapscan' option. BusyBox vi doesn't have this option and always
uses the default behaviour.)
function old new delta
colon 4033 4077 +44
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 44/0) Total: 44 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Run initialisation commands from ~/.exrc. As with EXINIT these
commands are processed before the first file is loaded.
Commands starting with double quotes are ignored. This is how
comments are often included in .exrc.
function old new delta
vi_main 268 406 +138
colon 4033 4071 +38
.rodata 108411 108442 +31
packed_usage 34128 34118 -10
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/1 up/down: 207/-10) Total: 197 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Rewrite handling of command line arguments so any number of -c
commands will be processed. Previously only two -c commands
were allowed (or one if EXINIT was set).
Process commands from EXINIT before the first file is read into
memory, as specified by POSIX.
function old new delta
run_cmds - 77 +77
.rodata 108410 108411 +1
vi_main 305 268 -37
edit_file 816 764 -52
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/2 up/down: 78/-89) Total: -11 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Building with FEATURE_VI_REGEX_SEARCH enabled fails.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
When regular expressions are allowed in search commands it becomes
possible to escape the delimiter in search/replace commands. For
example, this command will replace '/abc' with '/abc/':
:s/\/abc/\/abc\//g
The code to split the command into 'find' and 'replace' strings
should allow for this possibility.
VI_REGEX_SEARCH isn't enabled by default. When it is:
function old new delta
strchr_backslash - 38 +38
colon 4378 4373 -5
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/1 up/down: 38/-5) Total: 33 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
BusyBox vi has never supported the use of regular expressions in
search/replace (':s') commands. Implement this using GNU regex
when VI_REGEX_SEARCH is enabled.
The implementation:
- uses basic regular expressions, to match those used in the search
command;
- only supports substitution of back references ('\0' - '\9') in the
replacement string. Any other character following a backslash is
treated as that literal character.
VI_REGEX_SEARCH isn't enabled in the default build. In that case:
function old new delta
colon 4036 4033 -3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3) Total: -3 bytes
When VI_REGEX_SEARCH is enabled:
function old new delta
colon 4036 4378 +342
.rodata 108207 108229 +22
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 364/0) Total: 364 bytes
v2: Rebase. Code shrink. Ensure empty replacement string is null terminated.
Signed-off-by: Andrey Dobrovolsky <andrey.dobrovolsky.odessa@gmail.com>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Suppose we search for a git conflict marker '<<<<<<< HEAD' using
the command '/^<<<'. Using 'n' to go to the next match finds
'<<<' on the current line, apparently ignoring the '^' anchor.
Set a flag in the compiled regular expression to indicate that the
start of the string should not be considered a beginning-of-line
anchor. An exception has to be made when the search starts from
the beginning of the file. Make a similar change for end-of-line
anchors.
This doesn't affect a default build with VI_REGEX_SEARCH disabled.
When it's enabled:
function old new delta
char_search 247 285 +38
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Both traditional vi and vim use basic regular expressions for
search. Also, they don't allow matches to extend across line
endings. Thus with the file:
123
234
the search '/2.*4$' should find the second '2', not the first.
Make BusyBox vi do the same.
Whether or not VI_REGEX_SEARCH is enabled:
function old new delta
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0) Total: 0 bytes
Signed-off-by: Andrey Dobrovolsky <andrey.dobrovolsky.odessa@gmail.com>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit 7b93e317c (vi: enable 'dG' command. Closes 11801) allowed
'G' to be used as a range specifier for change/yank/delete
operations.
Add similar support for 'gg'. This requires setting the 'cmd_error'
flag if 'g' is followed by any character other than another 'g'.
function old new delta
do_cmd 4852 4860 +8
.rodata 108179 108180 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 9/0) Total: 9 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The same stored search pattern applies to both search ('/') and
search/replace (':s') operations.
A search/replace operation with an empty "find" string (':s//abc/')
should use the last stored search pattern, if available, and issue an
error message if there is none.
If the "find" string is not empty it should replace the stored search
pattern.
function old new delta
colon 3952 4024 +72
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 72/0) Total: 72 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
With FEATURE_VI_REGEX_SEARCH enabled backward searches don't work.
This is problematic on distros that enable regexes, such as Tiny
Core Linux and Fedora.
When calling GNU re_search() with a negative range parameter
(indicating a backward search) the start offset must be set to
the end of the area being searched.
The return value of re_search() is the offset of the matched pattern
from the start of the area being searched. For a successful search
(positive return value) char_search() can return the pointer to
the start of the area plus the offset.
FEATURE_VI_REGEX_SEARCH isn't enabled by default but when it is:
function old new delta
char_search 256 247 -9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-9) Total: -9 bytes
Signed-off-by: Andrey Dobrovolsky <andrey.dobrovolsky.odessa@gmail.com>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If the motion command used to define the range of a change, yank or
delete fails the whole command should be rejected. BusyBox vi already
handled failed searches in these circumstances. Add some more cases:
- non-existent mark: d'x
- movement beyond end of file: c99999+ or 99999<<
This is implemented using a global variable which is set when a command
error is detected. Unlike the case of motion within a line it's
insufficient to check that the motion command doesn't move the cursor:
this fails to process 'LyL' correctly, for example, as the second 'L'
doesn't move the cursor.
function old new delta
indicate_error 75 82 +7
find_range 686 692 +6
do_cmd 4851 4852 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 14/0) Total: 14 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
In traditional vi and vim line motion commands ('+'/'-'/'j'/'k')
fail if the movement would exceed the bounds of the file. BusyBox vi
allowed such commands to succeed, leaving the cursor on the first or
last character of the file.
Make BusyBox vi work like vi/vim.
For the 'G'/'H'/'L' commands traditional vi treats an out of bounds
result as an error, vim doesn't. BusyBox vi behaves like vim, both
before and after this patch.
function old new delta
do_cmd 4785 4851 +66
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 66/0) Total: 66 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When ESC is entered to leave insert mode any autoindent should only
be removed if there's no content beyond the indent. This may be the
case if a line has been split by entering insert mode and then
entering a CR.
Add a check to ensure there's only a newline after the indent.
function old new delta
char_insert 912 929 +17
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 17/0) Total: 17 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The default tabstop value should be set during early start up,
not reset for each new file.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When no line number is specified ':read' should place the inserted
text after the current line, not before.
This used to be correct but was broken when commit 0c42a6b07
(vi: fix empty line range regression) revealed a bug in commit
7a8ceb4eb (vi: changes to line addresses for colon commands).
function old new delta
colon 3960 3952 -8
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-8) Total: -8 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Lines that have no content apart from automatic indentation should
be treated as empty when the user hits return or ESC.
The implementation uses the global variable 'indentcol'. Usually
this is zero. It can also be -1 to indicate an 'O' (open above)
command, replacing the overloading of the tabstop option bit.
A value greater than zero indicates that the current line has
been autoindented to the given column (or that the autoindent has
been adjusted with ctrl-D). Any other change to the line resets
'indentcol' to zero.
Replace strspn() with ident_len(). The latter handles the unlikely
case that it's called on the last line of a file which doesn't have
a terminating newline.
function old new delta
char_insert 741 912 +171
indent_len - 42 +42
do_cmd 4781 4785 +4
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/0 up/down: 217/0) Total: 217 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Autoindent took a copy of the indent from a neighbouring line, which
may not have respected the expandtab setting.
Determine the target column and construct a suitable indent. This
will consist entirely of spaces if expandtab is enabled or an
efficient combination of tabs and spaces otherwise.
function old new delta
char_insert 719 741 +22
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 22/0) Total: 22 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit 24effc7a3 (vi: cursor positioning after whole-line 'y')
tried to save a few bytes by treating whole-line deletion the
same as whole-line yank. If the deletion removed the last lines
of the file the cursor was left beyond the end of the file.
Revert the part of the commit related to whole-line deletion.
Position the cursor on the first non-whitespace character of the
line when whole lines are 'put'.
function old new delta
do_cmd 4759 4781 +22
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 22/0) Total: 22 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
':wq' or ':x' should issue a warning if there are more files to edit,
unless they're followed by '!'.
function old new delta
colon 3911 3960 +49
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 49/0) Total: 49 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The 'y' command to yank text should leave the cursor at the start
of the range. This mostly works correctly in BusyBox vi but not
for whole-line yanks with backward motion, e.g. '2yk' to yank two
lines backwards. In this case the cursor is left at the end of the
range.
Fix this by returning the actual range from find_range(). Cursor
positioning following whole-line deletion is inconsistent between
vim and traditional vi. For BusyBox vi chose the option that uses
least code without being exactly compatible with either.
Also, find_range() preserved the value of 'dot', the current cursor
position. Since this isn't used by either caller of find_range()
we can save a few bytes by not bothering.
function old new delta
do_cmd 4730 4759 +29
find_range 749 686 -63
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 29/-63) Total: -34 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit 7a8ceb4eb (vi: changes to line addresses for colon commands)
was supposed to address the issue:
When the last address is empty it should refer to the current line.
This was intended to allow ranges of the form '1,' with an empty
last address. It should have been expressed as:
When the last address is empty *and the second last isn't* it
should refer to the current line.
Otherwise a command like ':w' only writes the current line resulting
in serious loss of data.
function old new delta
colon 3906 3911 +5
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 5/0) Total: 5 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Track the current and alternate filenames. The placeholders '%'
and '#' can be used in arguments to colon commands to represent
the current and alternate filenames respectively. Backslash can
be used to allow literal '%' and '#' characters to be entered.
This feature is controlled by the configuration option
FEATURE_VI_COLON_EXPAND.
function old new delta
expand_args - 198 +198
colon 3751 3927 +176
update_filename - 70 +70
init_filename - 48 +48
.rodata 105218 105239 +21
get_one_char 115 124 +9
edit_file 835 838 +3
do_cmd 4724 4727 +3
init_text_buffer 190 172 -18
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 5/1 up/down: 528/-18) Total: 510 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It was possible for get_input_line() to store its NUL terminator
one character beyond the end of its buffer.
Code shrink in colon():
- Certain colon commands can be matched exactly, as any shorter
string would be matched earlier, e.g. ':wq' versus ':write'.
- Command matching is now case sensitive so there's no need to
check for 'N' or 'Q' suffixes.
- Rewrite how commands and arguments are split.
function old new delta
colon 3848 3751 -97
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-97) Total: -97 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Improvements to ':read':
- When a file is read into the current buffer the cursor should be
placed on the first line read.
- If invoked without supplying a filename the current filename should
be used. This is similar to how ':edit' works.
- The code for ':edit' included an explicit check that the current
filename was non-empty. Both vim and traditional vi accept non-empty
filenames, only issuing an error message when an attempt to use such
a name fails.
- Allow undo of a file read.
function old new delta
file_insert 367 382 +15
colon 3841 3848 +7
.rodata 105236 105218 -18
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 22/-18) Total: 4 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When a new file is opened from an existing editing session the
following details should be preserved:
- the last command used;
- the last character searched for on a line.
function old new delta
edit_file 849 835 -14
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-14) Total: -14 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When 'ZZ' was used to save the current file and more files were
available to edit BusyBox vi immediately moved on to the next file.
The correct behaviour is to issue a warning.
function old new delta
do_cmd 4673 4724 +51
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 51/0) Total: 51 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Suppose vi is started with the command 'vi -R', that is, in readonly
mode with no filename. Attempting to save the file with 'ZZ' or ':w'
results in the message:
'(null)' is read only
Skip the code which prints this if no filename was provided, thus
falling through to file_write() which gives the more helpful message
'No current filename'.
function old new delta
colon 3867 3874 +7
do_cmd 4668 4673 +5
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 12/0) Total: 12 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since commit 74d565ff1 (vi: make context marks more like vi) the
list of commands that modify the text is no longer required when
FEATURE_VI_YANKMARK is enabled, only FEATURE_VI_DOT_CMD.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Make line addresses behave more like vi:
- Vi allows the user to enter an arbitrary number of addresses,
though only the last two are used. This simplifies get_address()
by reducing the amount of state that needs to be carried.
- When a command requires a single address the last one entered is
used.
- If addresses are separated by a ';' instead of a ',' the current
line is updated to the left address. This may be useful when a
search is used to specify a range, e.g. ':/first/;/last/d'.
- When the last address is empty it should refer to the current line.
function old new delta
colon 3855 3834 -21
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-21) Total: -21 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit ac6495f6f (vi: allow ctrl-D to reduce indentation) treated
ctrl-D during autoindent as a backspace. This was adequate for
indentation using tabs but doesn't work well with the expandtab
option. In the latter case it's necessary to backspace over all
the spaces.
Make ctrl-D work correctly when spaces are present in the indent.
Also, make it behave more like vim:
- ctrl-D is independent of autoindent;
- indentation is reduced even when the cursor isn't positioned at
the end of the indent.
function old new delta
char_insert 679 717 +38
get_column - 37 +37
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/0 up/down: 75/0) Total: 75 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This implements the vim option expandtab in BusyBox vi. From
vim help:
In Insert mode: Use the appropriate number of spaces to insert a
<Tab>. Spaces are used in indents with the '>' and '<' commands and
when 'autoindent' is on. To insert a real tab when 'expandtab' is
on, use CTRL-V<Tab>.
This implementation doesn't change how BusyBox vi handles autoindent:
it continues to copy the indentation from a neighbouring line. If
that line has tabs in its indentation so too will the new line.
function old new delta
char_insert 563 679 +116
next_column - 48 +48
.rodata 105211 105236 +25
colon 3844 3855 +11
refresh 1000 982 -18
move_to_col 83 59 -24
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/2 up/down: 200/-42) Total: 158 bytes
Signed-off-by: Peter D <urmum69@snopyta.org>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Line addresses in colon commands can be defined using an expression
that includes '+' or '-' operators. The implementation follows
traditional vi:
- The first term in the expression defines an address. It can be
an absolute line number, '.', '$', a search or a marker.
- The second and subsequent terms must be non-negative integers.
- If the first term is missing '.' is assumed. If the operator is
missing addition is assumed. If the final term in missing an
offset of 1 is assumed.
Thus the following are valid addresses:
.+1 .+ + .1
.-1 .- -
The following are not valid (though they are in vim):
.+$ .$ 2+.
function old new delta
colon 3701 3844 +143
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 143/0) Total: 143 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It should be possible to use a backward search as a line address
in colon commands.
function old new delta
colon 3661 3701 +40
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 40/0) Total: 40 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
