Config instructions for util-linux/volume_id are moved into the
source files according to the new config feature.
No code change.
Signed-off-by: Sven-Göran Bergh <sgb@systemasis.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Kbuild instructions for util-linux/volume_id are moved into the
source files according to the new build feature.
No code change.
Signed-off-by: Sven-Göran Bergh <sgb@systemasis.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
"losetup -d" was not complaining that LOOPDEV is missing.
"losetup -a" was listing only up to /dev/loop9.
"losetup -f" looped forever if llop0 was taken, and never tried
anything after /dev/loop9.
"-o" with other options (say, -r) had no effect.
function old new delta
losetup_main 376 419 +43
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
516530c932 uses $DEVNAME variable
for device node name. This is fine, but only works for hotplugging,
"mdev -s" will behave differently when DEVNAME and basename(path)
differ.
This patch extracts the DEVNAME from the uevent sysfs file in
make_device(), thus works for hot- and coldplugging; so using
the environment DEVNAME on hotplug events is no longer necessary.
Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
len is declared as uint32_t but le16_to_cpu macro is used
Signed-off-by: Oliver Metz <oliver.metz@gmx.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Added -a support. Also made sure -f works as follows:
losetup [-r] [-o offset] {-f|loopdev} file
Removed support for 'losetup -r' with no arguments.
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Sequential run of concurrent mdev's was too simplistic:
they waited for /dev/mdev.seq to match. This could sometimes
cause cumulative loss of time on the order of a second.
Added SIGCHLD signaling from exiting mdev to all other mdev's.
Added debugging required to see that code actually works as intended.
Example of /dev/mdev.log (with "woken up" elevated from dbg lvl 3 to 2):
mdev[1023]: first seq written
^^^^ seq, not pid
mdev[1023]: 35.022395 ACTION:add SUBSYSTEM:module DEVNAME:(null) DEVPATH:/module/lib80211
mdev[1023]: rule matched, line -1
^^^^^^^ means "default rule"
mdev[1023]: 35.022676 exiting
^^^^^^^^^ second,usec timestamp
mdev[1024]: 35.069691 ACTION:add SUBSYSTEM:vc DEVNAME:vcs9 DEVPATH:/devices/virtual/vc/vcs9
mdev[1024]: dev 7,9
mdev[1025]: 35.069889 waiting for '1024'
mdev[1026]: 35.069946 waiting for '1024'
mdev[1027]: 35.070151 waiting for '1024'
mdev[1024]: rule matched, line -1
mdev[1024]: mknod vcs9 (7,9) 20660 0:0
mdev[1024]: 35.070346 exiting
mdev[1025]: woken up
mdev[1026]: woken up
mdev[1025]: 35.071213 ACTION:add SUBSYSTEM:vc DEVNAME:vcsa9 DEVPATH:/devices/virtual/vc/vcsa9
^^^^^^^^^ took only a millisecond to start running after prev mdev exited
mdev[1025]: dev 7,137
mdev[1027]: woken up
mdev[1025]: rule matched, line -1
mdev[1025]: mknod vcsa9 (7,137) 20660 0:0
mdev[1025]: 35.072109 exiting
function old new delta
mdev_main 849 1372 +523
curtime - 59 +59
dirAction 87 134 +47
static.ts - 8 +8
keywords 19 12 -7
make_device 2189 2119 -70
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When the display unit is sectors, the partition alignment will convert
the partition start to a wrong unit (it should always be in sectors). Fix
this.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
After creating Sun disk label for the first time for a blank disk,
the partition table appears corrupted because current_label_type will
never get set to a proper type. Fix this by calling check_sun_label()
after BusyBox has created the label.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
unc option for CIFS mount is mandatory after CIFS option parsing
was rewritten in Linux 3.4
Signed-off-by: Martin Santesson <martinsn@axis.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since Linux 3.5 (7ff9554bb5: printk: convert byte-buffer to variable-length
record buffer), klog buffer can now contain log lines with multi-char
loglevel indicators (<[0-9]+>) - So we can no longer just skip 3 bytes.
Instead skip past the terminating '>' like util-linux does.
function old new delta
dmesg_main 266 280 +13
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 13/0) Total: 13 bytes
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
We set a default path for the directory where pidfiles are create
when FEATURE_PIDFILE is selected. The default has no effect on
applets which must specify a pidfile path on the command line to
run, and it can be overridden by applets which optionally allow
the user to specify the pidfile path.
We also add pidfile write/remove support for klogd, ntpd and watchdog.
For syslogd, we add a missing remove_pidfile() for better cleanup
on daemon exit.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The fbset utility would not respect "rgba" config entries in
the fb.modes file such as this (for the ARM Integrator/CP):
mode "640x480-60-clcd"
# D: 25.175 MHz, H: 31.469 kHz, V: 59.94 Hz
geometry 640 480 640 480 16
timings 39722 48 16 33 10 96 2
rgba 5/10,5/5,5/0,1/15
endmode
This is important especially for this ARGB5551 device which
is hopeless to configure otherwise. I noticed this lacking
feature after the TI "fbtest" program managed to set up the
the colormode correctly.
Signed-off-by: Linus Walleij <triad@df.lth.se>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This patch adds a missing LID0 switch definition.
Without it, closing the notebook lid is not detected by acpid.
Signed-off-by: Eric Martin <eric.martin@gmx.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It was colliding with matching of devnames with slashes.
We need a more generic way to examine env.vars in rules anyway.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
function old new delta
volume_id_probe_ext 108 132 +24
Signed-off-by: Dees Troy<dees_troy@teamw.in>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Allows one to specify list of filesystem types to be
tried when mounting particular device. E.g.
mount -t vfat,ext2 ...
Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When compiling with !ENABLE_FEATURE_GETOPT_LONG, busybox still tries
to include getopt.h which is not available; for example with uClibc
when !UCLIBC_HAS_GETOPT_LONG. getopt.h is only required
for the _long set of functions.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
