gcc accepts
__asm__ ( "" : : : "%cc");
but cc is not a real register and clang does not like it.
networking/tls_pstm_montgomery_reduce.c:385:4: error: unknown register name '%cc' in asm
| INNERMUL;
| ^
The % syntax nominally goes before a register, in this case cc,
like "memory" isn't a true register it's just a way of specifying that
the condition code registers for the target are clobbered
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was
eliminated and calls to it changed to be bb_error_msg(). The downside of
this is that daemons now log all messages to syslog at the LOG_ERR level
which makes it hard to filter errors from informational messages.
This change optionally re-introduces bb_info_msg(), controlled by a new
option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that
were removed (only in applets that set logmode to LOGMODE_SYSLOG or
LOGMODE_BOTH), and also changes informational messages in ifplugd and
ntpd.
The code size change of this is as follows (using 'defconfig' on x86_64
with gcc 7.3.0-27ubuntu1~18.04)
function old new delta
bb_info_msg - 182 +182
bb_vinfo_msg - 27 +27
static.log7 194 198 +4
log8 190 191 +1
log5 190 191 +1
crondlog 45 - -45
------------------------------------------------------------------------------
(add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes
If you don't care about everything being logged at LOG_ERR level
then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller:
function old new delta
static.log7 194 200 +6
log8 190 193 +3
log5 190 193 +3
syslog_level 1 - -1
bb_verror_msg 583 581 -2
crondlog 45 - -45
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Pass the Authorization header to CGI if not of type Basic. This will
make it possible for CGI to verify authorization headers of type
Bearer <token>.
function old new delta
handle_incoming_and_exit 2370 2379 +9
Signed-off-by: Alexander Vickberg <wickbergster@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Today for gzipped content httpd is using a header with name
Transfer-Length. However I can't find a header with that name in the
standards. Instead use Content-Length.
function old new delta
.rodata 157940 157936 -4
send_headers 980 939 -41
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-45) Total: -45 bytes
Signed-off-by: Alexander Vickberg <wickbergster@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Set up environment variables before running the CGI script.
The variables will be named HTTP_<filtered_name> where the <filtered_name>
is the header name capitalized and all characters not matching
[a-z] | [A-Z] | [0-9] replaced with '_'.
function old new delta
http_response 80 88 +8
http_response_type 20 22 +2
send_headers 718 715 -3
parse_conf 1481 1478 -3
get_line 128 110 -18
cgi_io_loop_and_exit 599 569 -30
send_cgi_and_exit 882 738 -144
handle_incoming_and_exit 2793 2592 -201
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/6 up/down: 10/-399) Total: -389 bytes
text data bss dec hex filename
982178 485 7296 989959 f1b07 busybox_old
981675 485 7296 989456 f1910 busybox_unstripped
Signed-off-by: Alexander Vickberg <wickbergster@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The proxying is documented as follows:
P:/url:[http://]hostname[:port]/new/path
Howeverm urlcopy is not a true copy anymore when it is fdprint'ed
to proxy_fd, this is because percent_decode_in_place() is called
after the copy is created.
This breaks reverse proxying all URIs containing percent
encoded spaces, e.g. - because a decoded URI will be printed out
to proxy_fd instead of the original.
The fix keeps the logic in place to canonicalize the uri first,
before reverse proxying (one could argue that the uri
should be proxied completely unaltered, except for the prefix
rewrite).
function old new delta
handle_incoming_and_exit 2752 2792 +40
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Support for the IEEE timezone string and timezone database strings (100
and 101 options respectively) is added for ipv4, conforming to RFC-4833.
The two options are passed to hook scripts in the variables tzstr and
tzdbstr.
function old new delta
dhcp_option_strings 280 294 +14
dhcp_optflags 76 80 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 18/0) Total: 18 bytes
Signed-off-by: Antoine Girard-Vallée <antoine.girard-vallee@savoirfairelinux.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
ipaddress.c: In function ‘ipaddr_list_or_flush’:
ipaddress.c:427:6: warning: variable ‘no_link’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Fixed a TODO in AYT IAC handling by replying back with a NOP.
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit db169f2538 breaks the "ip -o link"
command, no output is displayed.. Fix by only excluding the link info if
in oneline mode and if the address family is not AF_PACKET.
function old new delta
ipaddr_list_or_flush 1232 1202 -30
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Currently, running "udhcpc -n -b" causes udhcpc to go to background and
then exit after some time unless a lease is obtained.
It's not very useful to do so
as the calling process doesn't know
if the lease was obtained or not anyway.
The code actually tries to favor "-b" over "-n",
but doesn't clear "-n" flag while clearing "-b" after backgrounding.
So, clear "-n" flag after going into background.
This effectively makes "-b" override "-n" completely
and "-n -b" behave the same as "-b".
This allows to override default "-n" option, passed to udhcpc by ifupdown,
without recompiling busybox.
URL: https://bugs.busybox.net/11691
Signed-off-by: Andrey Mazo <ahippo@yandex.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The proto has to be passed in network byte-order.
While at it allow for
ip link add link eth0 name eth0.2.24 type vlan proto 802.1ad id 24
ip link del link eth0 name eth0.2.24 type vlan proto 802.1ad id 24
The del was lacking a dev_str and thus errored out. Fix by using
name/dev counterpart as fallback.
The proto identifier 802.1Q was not recognized, just it's lowercase
variant, fix that too.
function old new delta
do_add_or_delete 1275 1376 +101
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 101/0) Total: 101 bytes
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
When printing notification on download start and end,
mistakenly, it didn't respect the quiet option
function old new delta
retrieve_file_data 561 579 +18
wget_main 2432 2437 +5
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 23/0) Total: 23 bytes
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The real telnet provides some feedback:
Trying 127.0.0.1...
Connected to localhost.localdomain.
Escape character is '^]'.
We should do this to, because people are sitting there and think
a firewall is dropping packets.
function old new delta
telnet_main 1270 1279 +9
Signed-off-by: Danijel Tasov <m@rbfh.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When using -o to file the progress meter is not displayed, so write that
we started the download and that we finished it.
function old new delta
retrieve_file_data 465 561 +96
wget_main 2412 2432 +20
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 116/0) Total: 116 bytes
text data bss dec hex filename
979022 485 7296 986803 f0eb3 busybox_old
979224 485 7296 987005 f0f7d busybox_unstripped
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
