Commit Graph

259 Commits

Author SHA1 Message Date
Denys Vlasenko
265fcddd08 udhcpc: include client-id option in DECLINEs, even if it's a custom -x 61:HEX option
client_data.vendorclass, .hostname and .fqdn probably need the same treatment:
just insert them into the list of -x opts, get rid of

        if (client_data.vendorclass)
                udhcp_add_binary_option(packet, client_data.vendorclass);
        if (client_data.hostname)
                udhcp_add_binary_option(packet, client_data.hostname);
        if (client_data.fqdn)
                udhcp_add_binary_option(packet, client_data.fqdn);

function                                             old     new   delta
udhcp_insert_new_option                                -     166    +166
perform_release                                      171     207     +36
perform_d6_release                                   227     259     +32
udhcpc6_main                                        2558    2580     +22
init_d6_packet                                       103      84     -19
udhcpc_main                                         2585    2564     -21
attach_option                                        397     253    -144
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/3 up/down: 256/-184)           Total: 72 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-06-02 14:07:26 +02:00
Denys Vlasenko
687f41f10b udhcpc[6]: fix "untangle timeout and remaining lease" fallout
As reported in bug 13776, before this fix the renew never times out.

function                                             old     new   delta
udhcpc_main                                         2541    2585     +44
udhcpc6_main                                        2567    2558      -9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 44/-9)              Total: 35 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-06-01 00:19:03 +02:00
Denys Vlasenko
e6007c4911 udhcpc[6]: fold perform_renew() into its only caller
function                                             old     new   delta
udhcpc_main                                         2550    2541      -9
udhcpc6_main                                        2576    2567      -9
change_listen_mode                                   321     299     -22
.rodata                                           103294  103225     -69
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-109)           Total: -109 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-05-01 13:48:50 +02:00
Denys Vlasenko
a1a77ad5ea udhcpc[6]: untangle "timeout" and "remaining lease"; reduce min lease to 30 seconds
This allows to fix a problem that we wait for renew replies
for up to half the lease (!!!) if they never come.

Make it so that lease of 60 seconds is not "rounded up" to 120 seconds -
set lower "sanity limit" to 30 seconds.

After 3 failed renew attempts, switch to rebind.

After this change, we can have more flexible choice of when to do
the first renew - does not need to be equal to lease / 2.

function                                             old     new   delta
udhcpc6_main                                        2568    2576      +8
.rodata                                           103339  103294     -45
udhcpc_main                                         2609    2550     -59
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/2 up/down: 8/-104)            Total: -96 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-05-01 12:23:25 +02:00
Denys Vlasenko
a4959eef71 udhcp: reuse strings
text	   data	    bss	    dec	    hex	filename
1019916	    559	   5020	1025495	  fa5d7	busybox_old
1019906	    559	   5020	1025485	  fa5cd	busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-02-21 16:32:07 +01:00
Denys Vlasenko
64483324c5 udhcpc: clarify bcast/unicast sends in logs, include server ID
Before:
    sending discover
    sending select for 192.168.1.173
    lease of 192.168.1.173 obtained, lease time 43200
    sending renew to 192.168.1.1
    lease of 192.168.1.173 obtained, lease time 43200
After:
    broadcasting discover
    broadcasting select for 192.168.1.173, server 192.168.1.1
    lease of 192.168.1.173 obtained from 192.168.1.1, lease time 43200
    sending renew to server 192.168.1.1
    lease of 192.168.1.173 obtained from 192.168.1.1, lease time 43200

function                                             old     new   delta
udhcpc_main                                         2580    2610     +30
send_select                                          104     130     +26
send_renew                                            82      99     +17
send_discover                                         94      89      -5
send_decline                                          93      88      -5
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/2 up/down: 73/-10)             Total: 63 bytes
   text	   data	    bss	    dec	    hex	filename
1019732	    559	   5020	1025311	  fa51f	busybox_old
1019898	    559	   5020	1025477	  fa5c5	busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-02-20 18:13:42 +01:00
Andre Kalb
5f2e00f66d udhcpc: Add support to change default interface name
Signed-off-by: Andre Kalb <Andre.Kalb@sma.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-01-01 19:08:28 +01:00
Michal Kazior
b817699e6c udhcp: bind to device even for ucast packets
There are cases where binding to source IP and
destination IP is insufficient to guarantee sane
xmit netdev.

One case where this can fail is when
route-matching netdev carrier is down (cable
unplugged, wifi disconnected), or the netdev is
admin down. Then all the IP based bindings (bind()
+ connect()) will seemingly succeed but the actual
packet can go out through a default gw path.

Depending on the network this happens on
it can create issues or false alarms. It can
also leak some subnet info across networks that
shouldn't be routed.

As such better be safe than sorry and bind to a
netdev to be sure it's used for xmit.

function                                             old     new   delta
udhcp_send_kernel_packet                             293     336     +43
send_packet                                          182     188      +6
bcast_or_ucast                                        37      43      +6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 55/0)               Total: 55 bytes

Signed-off-by: Michal Kazior <michal@plume.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-12-15 21:44:21 +01:00
Denys Vlasenko
4a0eb0370c gcc-9.x warning fixes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-10-01 03:07:22 +02:00
Martin Lewis
9914d8b861 udhcpc: add support for long options
Duplicate options are currently overridden (only the last option is kept).
This leads to unexpected behavior when using long options.

The patch adds support for long options in compliance with RFC 3396.

Fixes #13136.

function                                             old     new   delta
udhcp_run_script                                     601     725    +124
optitem_unset_env_and_free                             -      38     +38
putenvp                                               46      59     +13
static.xmalloc_optname_optval                        718     717      -1
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/1 up/down: 175/-1)            Total: 174 bytes

Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-08-13 16:48:07 +02:00
Martin Lewis
1f86ecb729 udhcpc: fix a TODO in fill_envp using option scanner
fill_envp now iterates over the packet only once instead of a few hundred times
using the new option scanner.

function                                             old     new   delta
udhcp_scan_options                                     -     189    +189
putenvp                                                -      46     +46
init_scan_state                                        -      22     +22
udhcp_get_option                                     227     104    -123
udhcp_run_script                                     835     601    -234
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 0/2 up/down: 257/-357)         Total: -100 bytes

Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-29 15:26:09 +02:00
Martin Lewis
d30d1ebc11 dhcpc: refactor xmalloc_optname_optval to shrink binary size
function                                             old     new   delta
len_of_option_as_string                               14      13      -1
dhcp_option_lengths                                   14      13      -1
udhcp_str2optset                                     641     637      -4
static.xmalloc_optname_optval                        777     718     -59
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-65)             Total: -65 bytes

Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-09 17:59:56 +02:00
Martin Lewis
726d0d148b dhcpc: code shrink in good_hostname
Incorporated valid_domain_label into good_hostname to simplify the implementation.

function                                             old     new   delta
static.xmalloc_optname_optval                        973     958     -15
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-15)             Total: -15 bytes
   text	   data	    bss	    dec	    hex	filename
 993144	  16915	   1872	1011931	  f70db	busybox_old
 993129	  16915	   1872	1011916	  f70cc	busybox_unstripped

Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-09 01:49:10 +02:00
Denys Vlasenko
11e024aa86 udhcpc6: add ELAPSED_TIME option to outgoing packets
function                                             old     new   delta
init_d6_packet                                        53     121     +68
udhcpc_main                                         2577    2582      +5
udhcpc6_main                                        2593    2597      +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 77/0)               Total: 77 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-09-24 14:01:00 +02:00
James Byrne
6937487be7 libbb: reduce the overhead of single parameter bb_error_msg() calls
Back in 2007, commit 0c97c9d437 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().

This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.

Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.

This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.

The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):

Arm:     -92 bytes
MIPS:    -52 bytes
PPC:   -1836 bytes
x86_64: -938 bytes

Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 11:35:03 +02:00
Denys Vlasenko
84d38500a7 udhcpc: fix comment, no code changes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-06-13 10:02:03 +02:00
Martin Lewis
d378fa170a dhcpc.c: Added support for relay server parameter.
Resolved a TODO by adding support for gateway_nip parameter.

function                                             old     new   delta
udhcp_run_script                                     792     835     +43

Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-06-11 17:18:28 +02:00
Denys Vlasenko
6eb6e6a1e9 dhcp: downgrade "got raw socket fd" message to log3, make log2 default max
log3 messages are very much redundant

function                                             old     new   delta
change_listen_mode                                   322     302     -20

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-31 23:52:16 +02:00
Denys Vlasenko
65c34c52df dhcp: get rid of static data signal_pipe
function                                             old     new   delta
udhcp_sp_setup                                        65     110     +45
udhcp_sp_fd_set                                       60      59      -1
udhcpd_main                                         1442    1437      -5
udhcpc_main                                         2684    2679      -5
signal_pipe                                            8       -      -8
packed_usage                                       33292   33284      -8
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/4 up/down: 45/-27)             Total: 18 bytes
   text	   data	    bss	    dec	    hex	filename
 952746	    481	   7296	 960523	  ea80b	busybox_old
 952768	    481	   7288	 960537	  ea819	busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-31 23:39:22 +02:00
Denys Vlasenko
bcb1fc3e6c udhcp: rename client_config to client_data, server_config to server_data
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-26 15:03:05 +02:00
Denys Vlasenko
a4ed2c45b9 dhcp: get rid of last global data
function                                             old     new   delta
udhcpc_main                                         2680    2684      +4
state                                                  1       -      -1
listen_mode                                            1       -      -1
sockfd                                                 4       -      -4
------------------------------------------------------------------------------
(add/remove: 0/3 grow/shrink: 1/0 up/down: 4/-6)               Total: -2 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-26 13:05:04 +02:00
James Byrne
253c4e787a Optionally re-introduce bb_info_msg()
Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was
eliminated and calls to it changed to be bb_error_msg(). The downside of
this is that daemons now log all messages to syslog at the LOG_ERR level
which makes it hard to filter errors from informational messages.

This change optionally re-introduces bb_info_msg(), controlled by a new
option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that
were removed (only in applets that set logmode to LOGMODE_SYSLOG or
LOGMODE_BOTH), and also changes informational messages in ifplugd and
ntpd.

The code size change of this is as follows (using 'defconfig' on x86_64
with gcc 7.3.0-27ubuntu1~18.04)

function                                             old     new   delta
bb_info_msg                                            -     182    +182
bb_vinfo_msg                                           -      27     +27
static.log7                                          194     198      +4
log8                                                 190     191      +1
log5                                                 190     191      +1
crondlog                                              45       -     -45
------------------------------------------------------------------------------
(add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45)           Total: 170 bytes

If you don't care about everything being logged at LOG_ERR level
then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller:

function                                             old     new   delta
static.log7                                          194     200      +6
log8                                                 190     193      +3
log5                                                 190     193      +3
syslog_level                                           1       -      -1
bb_verror_msg                                        583     581      -2
crondlog                                              45       -     -45
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48)            Total: -36 bytes

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-30 10:51:27 +02:00
Andrey Mazo
87e216294a udhcpc: don't exit after backgrounding on -n -b
Currently, running "udhcpc -n -b" causes udhcpc to go to background and
then exit after some time unless a lease is obtained.

It's not very useful to do so
as the calling process doesn't know
if the lease was obtained or not anyway.

The code actually tries to favor "-b" over "-n",
but doesn't clear "-n" flag while clearing "-b" after backgrounding.

So, clear "-n" flag after going into background.
This effectively makes "-b" override "-n" completely
and "-n -b" behave the same as "-b".

This allows to override default "-n" option, passed to udhcpc by ifupdown,
without recompiling busybox.

URL: https://bugs.busybox.net/11691

Signed-off-by: Andrey Mazo <ahippo@yandex.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-02-27 08:27:47 +01:00
Denys Vlasenko
544143da0c udhcpc: tweak --help
function                                             old     new   delta
packed_usage                                       33324   33315      -9

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-02-27 08:17:07 +01:00
Denys Vlasenko
74d9f1ba37 udhcpc: when decoding DHCP_SUBNET, ensure it is 4 bytes long
function                                             old     new   delta
udhcp_run_script                                     795     801      +6

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-01-07 15:33:42 +01:00
Denys Vlasenko
6d3b4bb24d udhcpc: check that 4-byte options are indeed 4-byte, closes 11506
function                                             old     new   delta
udhcp_get_option32                                     -      27     +27
udhcp_get_option                                     231     248     +17
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/0 up/down: 44/0)               Total: 44 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-12-17 18:07:18 +01:00
Denys Vlasenko
9d05ad087e udhcpc: code shrink
function                                             old     new   delta
perform_release                                      112     172     +60
send_release                                          81       -     -81
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/0 up/down: 60/-81)            Total: -21 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-03 23:34:35 +01:00
Denys Vlasenko
c05aa6a776 udhcpc: ensure at least one unicast renew attempt
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-10-30 11:56:18 +01:00
Denys Vlasenko
aae428f0bf udhcpc: give SIGUSR1-induced renew one chance of unicast renew
The caps were inconsistent: timeout to renew was capped at 20 seconds,
and any renews with timeout <= 60 seconds were forced to broadcast.

function                                             old     new   delta
udhcpc_main                                         2683    2680      -3

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-09-28 14:44:09 +02:00
Denys Vlasenko
02cf149ed7 udhcpc: add a cooment about sanitizing DHCP_DOMAIN_NAME, no code changes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-01 13:36:36 +02:00
Denys Vlasenko
48ec979ed1 udhcpc: do in fact not allow hostname components which start with dash
function                                             old     new   delta
xmalloc_optname_optval                               879     893     +14

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-01 13:16:05 +02:00
Denys Vlasenko
148788eb0e udhcpc: remove code which requires server ID to be on local network
This reverts "udhcpc: paranoia when using kernel UDP mode
for sending renew: server ID may be bogus".

Users complain that they do have servers behind routers
(with DHCP relays).

function                                             old     new   delta
send_packet                                          168     166      -2
bcast_or_ucast                                        25      23      -2
udhcp_send_kernel_packet                             301     295      -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-10)             Total: -10 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-06-21 17:38:14 +02:00
Denys Vlasenko
6027597fd1 udhcpc6: set -x options in request
Last foru commits:

function                                             old     new   delta
option_to_env                                        621     791    +170
.rodata                                           168351  168505    +154
attach_option                                        431     506     +75
add_d6_client_options                                112     167     +55
d6_option_strings                                     30      84     +54
udhcp_str2optset                                     644     660     +16
d6_optflags                                           12      20      +8
udhcpc6_main                                        2590    2596      +6
udhcpc_main                                         2648    2651      +3
read_optset                                           15      18      +3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 10/0 up/down: 544/0)            Total: 544 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-05-14 11:11:08 +02:00
Denys Vlasenko
266f6f1973 udhcp: support string user options, closes 10946
function                                             old     new   delta
udhcp_str2optset                                     536     628     +92
packed_usage                                       32757   32760      +3
udhcpc_main                                         2708    2692     -16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 95/-16)             Total: 79 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-04-13 13:27:52 +02:00
Denys Vlasenko
3293bc1469 udhcpd: fix "not dying on SIGTERM"
Fixes:
	commit 52a515d187
	"udhcp: use poll() instead of select()"
	Feb 16 2017

udhcp_sp_read() is meant to check whether signal pipe indeed has some data to read.
In the above commit, it was changed as follows:

-	if (!FD_ISSET(signal_pipe.rd, rfds))
+	if (!pfds[0].revents)
		return 0;

The problem is, the check was working for select() purely by accident.
Caught signal interrupts select()/poll() syscalls, they return with EINTR
(regardless of SA_RESTART flag in sigaction). _Then_ signal handler is invoked.
IOW: they can't see any changes to fd state caused by signal haldler
(in our case, signal handler makes signal pipe ready to be read).

For select(), it means that rfds[] bit array is unmodified, bit of signal
pipe's read fd is still set, and the above check "works": it thinks select()
says there is data to read.

This accident does not work for poll(): .revents stays clear, and we do not
try reading signal pipe as we should. In udhcpd, we fall through and block
in socket read. Further SIGTERM signals simply cause socket read to be
interrupted and then restarted (since SIGTERM handler has SA_RESTART=1).

Fixing this as follows: remove the check altogether. Set signal pipe read fd
to nonblocking mode. Always read it in udhcp_sp_read().
If read fails, assume it's EAGAIN and return 0 ("no signal seen").

udhcpd avoids reading signal pipe on every recvd packet by looping if EINTR
(using safe_poll()) - thus ensuring we have correct .revents for all fds -
and calling udhcp_sp_read() only if pfds[0].revents!=0.

udhcpc performs much fewer reads (typically it sleeps >99.999% of the time),
there is no need to optimize it: can call udhcp_sp_read() after each poll
unconditionally.

To robustify socket reads, unconditionally set pfds[1].revents=0
in udhcp_sp_fd_set() (which is before poll), and check it before reading
network socket in udhcpd.

TODO:
This might still fail: if pfds[1].revents=POLLIN, socket read may still block.
There are rare cases when select/poll indicates that data can be read,
but then actual read still blocks (one such case is UDP packets with
wrong checksum). General advise is, if you use a poll/select loop,
keep all your fds nonblocking.
Maybe we should also do that to our network sockets?

function                                             old     new   delta
udhcp_sp_setup                                        55      65     +10
udhcp_sp_fd_set                                       54      60      +6
udhcp_sp_read                                         46      36     -10
udhcpd_main                                         1451    1437     -14
udhcpc_main                                         2723    2708     -15
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/3 up/down: 16/-39)            Total: -23 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-03-10 19:34:39 +01:00
Denys Vlasenko
2bd5b4e9a0 udhcp: do not setlinebuf(stdout), we don't print to stdout anymore
Since bb_info_msg() was eliminated type of buffering on stdout is not important

function                                             old     new   delta
udhcpd_main                                         1463    1451     -12
udhcpc_main                                         2735    2723     -12
setlinebuf                                            19       -     -19
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 0/2 up/down: 0/-43)             Total: -43 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-02-07 16:32:30 +01:00
Denys Vlasenko
7c44b600f9 udhcpc[6]: remove overzealous timeout clamping code
function                                             old     new   delta
udhcpc_main                                         2840    2826     -14
udhcpc6_main                                        2699    2670     -29

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-01-17 13:55:51 +01:00
Denys Vlasenko
ebe6d9d875 whitespace and comment format fixes, no code changes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-10-05 14:40:24 +02:00
Denys Vlasenko
6f97b30a90 use %m printf specifier where appropriate
function                                             old     new   delta
out                                                   85      75     -10
udhcpd_main                                         1472    1461     -11
open_stdio_to_tty                                     98      85     -13
init_exec                                            245     232     -13
udhcpc_main                                         2763    2749     -14
do_cmd                                              4771    4755     -16
status_line_bold_errno                                32      14     -18
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-95)             Total: -95 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-29 18:17:25 +02:00
Denys Vlasenko
f625836e60 udhcpc[6]: make log2 messages for chaddr field indented like the rest
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-29 18:02:01 +02:00
Denys Vlasenko
a6a3ad3273 udhcpc: paranoia when using kernel UDP mode for sending renew: server ID may be bogus
With new code, we request that target IP (server ID) must be directly reachable.
If it's not, this happens:

udhcpc: waiting 2000 seconds
udhcpc: entering listen mode: kernel
udhcpc: opening listen socket on *:68 wlan0
udhcpc: entering renew state
udhcpc: sending renew to 1.1.1.1
udhcpc: send: Network is unreachable
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1.1.1.1 needs routing, this is fishy!
udhcpc: entering rebinding state
udhcpc: entering listen mode: raw
udhcpc: created raw socket
udhcpc: sending renew to 0.0.0.0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ going to use broadcast

which is the desired behavior. Before the patch, packet to 1.1.1.1 was routed
over eth0 (!) and maybe even into Internet (!!!).

function                                             old     new   delta
udhcpc_main                                         2752    2763     +11
udhcp_send_kernel_packet                             295     301      +6
send_renew                                            82      84      +2
send_packet                                          166     168      +2
bcast_or_ucast                                        23      25      +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/0 up/down: 23/0)               Total: 23 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-29 16:02:11 +02:00
Denys Vlasenko
2b9acc60c0 udhcpc[6]: initialize entire sockaddr_ll
I see random field values like sll_hatype=0x267 when I strace.
They seem to not matter, but just in case they sometimes do,
let's at least have deterministic values (via memset(0)).

function                                             old     new   delta
change_listen_mode                                   308     322     +14

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-29 14:22:43 +02:00
Denys Vlasenko
3256111efb udhcpc: show only short opts in --help text
function                                             old     new   delta
packed_usage                                       31615   31501    -114

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-08-29 16:51:17 +02:00
Denys Vlasenko
22542eca18 getopt32: remove opt_complementary
function                                             old     new   delta
vgetopt32                                           1318    1392     +74
runsvdir_main                                        703     713     +10
bb_make_directory                                    423     425      +2
collect_cpu                                          546     545      -1
opt_chars                                              3       -      -3
opt_complementary                                      4       -      -4
tftpd_main                                           567     562      -5
ntp_init                                             476     471      -5
zcip_main                                           1266    1256     -10
xxd_main                                             428     418     -10
whois_main                                           140     130     -10
who_main                                             463     453     -10
which_main                                           212     202     -10
wget_main                                           2535    2525     -10
watchdog_main                                        291     281     -10
watch_main                                           222     212     -10
vlock_main                                           399     389     -10
uuencode_main                                        332     322     -10
uudecode_main                                        316     306     -10
unlink_main                                           45      35     -10
udhcpd_main                                         1482    1472     -10
udhcpc_main                                         2762    2752     -10
tune2fs_main                                         290     280     -10
tunctl_main                                          366     356     -10
truncate_main                                        218     208     -10
tr_main                                              518     508     -10
time_main                                           1134    1124     -10
tftp_main                                            286     276     -10
telnetd_main                                        1873    1863     -10
tcpudpsvd_main                                      1785    1775     -10
taskset_main                                         521     511     -10
tar_main                                            1009     999     -10
tail_main                                           1644    1634     -10
syslogd_main                                        1967    1957     -10
switch_root_main                                     368     358     -10
svlogd_main                                         1454    1444     -10
sv                                                  1296    1286     -10
stat_main                                            104      94     -10
start_stop_daemon_main                              1028    1018     -10
split_main                                           542     532     -10
sort_main                                            796     786     -10
slattach_main                                        624     614     -10
shuf_main                                            504     494     -10
setsid_main                                           96      86     -10
setserial_main                                      1132    1122     -10
setfont_main                                         388     378     -10
setconsole_main                                       78      68     -10
sendmail_main                                       1209    1199     -10
sed_main                                             677     667     -10
script_main                                         1077    1067     -10
run_parts_main                                       325     315     -10
rtcwake_main                                         454     444     -10
rm_main                                              175     165     -10
reformime_main                                       119     109     -10
readlink_main                                        123     113     -10
rdate_main                                           246     236     -10
pwdx_main                                            189     179     -10
pstree_main                                          317     307     -10
pscan_main                                           663     653     -10
popmaildir_main                                      818     808     -10
pmap_main                                             80      70     -10
nc_main                                             1042    1032     -10
mv_main                                              558     548     -10
mountpoint_main                                      477     467     -10
mount_main                                          1264    1254     -10
modprobe_main                                        768     758     -10
modinfo_main                                         333     323     -10
mktemp_main                                          200     190     -10
mkswap_main                                          324     314     -10
mkfs_vfat_main                                      1489    1479     -10
microcom_main                                        715     705     -10
md5_sha1_sum_main                                    521     511     -10
man_main                                             867     857     -10
makedevs_main                                       1052    1042     -10
ls_main                                              563     553     -10
losetup_main                                         432     422     -10
loadfont_main                                         89      79     -10
ln_main                                              524     514     -10
link_main                                             75      65     -10
ipcalc_main                                          544     534     -10
iostat_main                                         2397    2387     -10
install_main                                         768     758     -10
id_main                                              480     470     -10
i2cset_main                                         1239    1229     -10
i2cget_main                                          380     370     -10
i2cdump_main                                        1482    1472     -10
i2cdetect_main                                       682     672     -10
hwclock_main                                         406     396     -10
httpd_main                                           741     731     -10
grep_main                                            837     827     -10
getty_main                                          1559    1549     -10
fuser_main                                           297     287     -10
ftpgetput_main                                       345     335     -10
ftpd_main                                           2232    2222     -10
fstrim_main                                          251     241     -10
fsfreeze_main                                         77      67     -10
fsck_minix_main                                     2921    2911     -10
flock_main                                           314     304     -10
flashcp_main                                         740     730     -10
flash_eraseall_main                                  833     823     -10
fdformat_main                                        532     522     -10
expand_main                                          680     670     -10
eject_main                                           335     325     -10
dumpleases_main                                      630     620     -10
du_main                                              314     304     -10
dos2unix_main                                        441     431     -10
diff_main                                           1350    1340     -10
df_main                                             1064    1054     -10
date_main                                           1095    1085     -10
cut_main                                             961     951     -10
cryptpw_main                                         228     218     -10
crontab_main                                         575     565     -10
crond_main                                          1149    1139     -10
cp_main                                              370     360     -10
common_traceroute_main                              3834    3824     -10
common_ping_main                                    1767    1757     -10
comm_main                                            239     229     -10
cmp_main                                             655     645     -10
chrt_main                                            379     369     -10
chpst_main                                           704     694     -10
chpasswd_main                                        308     298     -10
chown_main                                           171     161     -10
chmod_main                                           158     148     -10
cat_main                                             428     418     -10
bzip2_main                                           120     110     -10
blkdiscard_main                                      264     254     -10
base64_main                                          221     211     -10
arping_main                                         1665    1655     -10
ar_main                                              556     546     -10
adjtimex_main                                        406     396     -10
adduser_main                                         882     872     -10
addgroup_main                                        411     401     -10
acpid_main                                          1198    1188     -10
optstring                                             11       -     -11
opt_string                                            18       -     -18
OPT_STR                                               25       -     -25
ubi_tools_main                                      1288    1258     -30
ls_options                                            31       -     -31
------------------------------------------------------------------------------
(add/remove: 0/6 grow/shrink: 3/129 up/down: 86/-1383)      Total: -1297 bytes
   text	   data	    bss	    dec	    hex	filename
 915428	    485	   6876	 922789	  e14a5	busybox_old
 914629	    485	   6872	 921986	  e1182	busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-08-08 21:55:02 +02:00
Denys Vlasenko
036585a911 getopt32: remove applet_long_options
FEATURE_GETOPT_LONG made dependent on LONG_OPTS.

The folloving options are removed, now LONG_OPTS enables long options
for affected applets:
FEATURE_ENV_LONG_OPTIONS	FEATURE_EXPAND_LONG_OPTIONS
FEATURE_UNEXPAND_LONG_OPTIONS	FEATURE_MKDIR_LONG_OPTIONS
FEATURE_MV_LONG_OPTIONS		FEATURE_RMDIR_LONG_OPTIONS
FEATURE_ADDGROUP_LONG_OPTIONS	FEATURE_ADDUSER_LONG_OPTIONS
FEATURE_HWCLOCK_LONG_OPTIONS	FEATURE_NSENTER_LONG_OPTS
FEATURE_CHCON_LONG_OPTIONS	FEATURE_RUNCON_LONG_OPTIONS

They either had a small number of long options, or their long options are
essential.

Example: upstream addgroup and adduser have ONLY longopts,
we should probably go further and get rid
of non-standard short options.

To this end, make addgroup and adduser "select LONG_OPTS".
We had this breakage caused by us even in our own package!
	#if ENABLE_LONG_OPTS || !ENABLE_ADDGROUP
                /* We try to use --gid, not -g, because "standard" addgroup
                 * has no short option -g, it has only long --gid.
                 */
                argv[1] = (char*)"--gid";
	#else
                /* Breaks if system in fact does NOT use busybox addgroup */
                argv[1] = (char*)"-g";
	#endif

xargs: its lone longopt no longer depends on DESKTOP, only on LONG_OPTS.

hwclock TODO: get rid of incompatible -t, -l aliases to --systz, --localtime

Shorten help texts by omitting long option when short opt alternative exists.

Reduction of size comes from the fact that store of an immediate
(an address of longopts) to a fixed address (global variable)
is a longer insn than pushing that immediate or passing it in a register.
This effect is CPU-agnostic.

function                                             old     new   delta
getopt32                                            1350      22   -1328
vgetopt32                                              -    1318   +1318
getopt32long                                           -      24     +24
tftpd_main                                           562     567      +5
scan_recursive                                       376     380      +4
collect_cpu                                          545     546      +1
date_main                                           1096    1095      -1
hostname_main                                        262     259      -3
uname_main                                           259     255      -4
setpriv_main                                         362     358      -4
rmdir_main                                           191     187      -4
mv_main                                              562     558      -4
ipcalc_main                                          548     544      -4
ifenslave_main                                       641     637      -4
gzip_main                                            192     188      -4
gunzip_main                                           77      73      -4
fsfreeze_main                                         81      77      -4
flock_main                                           318     314      -4
deluser_main                                         337     333      -4
cp_main                                              374     370      -4
chown_main                                           175     171      -4
applet_long_options                                    4       -      -4
xargs_main                                           894     889      -5
wget_main                                           2540    2535      -5
udhcpc_main                                         2767    2762      -5
touch_main                                           436     431      -5
tar_main                                            1014    1009      -5
start_stop_daemon_main                              1033    1028      -5
sed_main                                             682     677      -5
script_main                                         1082    1077      -5
run_parts_main                                       330     325      -5
rtcwake_main                                         459     454      -5
od_main                                             2169    2164      -5
nl_main                                              201     196      -5
modprobe_main                                        773     768      -5
mkdir_main                                           160     155      -5
ls_main                                              568     563      -5
install_main                                         773     768      -5
hwclock_main                                         411     406      -5
getopt_main                                          622     617      -5
fstrim_main                                          256     251      -5
env_main                                             198     193      -5
dumpleases_main                                      635     630      -5
dpkg_main                                           3991    3986      -5
diff_main                                           1355    1350      -5
cryptpw_main                                         233     228      -5
cpio_main                                            593     588      -5
conspy_main                                         1135    1130      -5
chpasswd_main                                        313     308      -5
adduser_main                                         887     882      -5
addgroup_main                                        416     411      -5
ftpgetput_main                                       351     345      -6
get_terminal_width_height                            242     234      -8
expand_main                                          690     680     -10
static.expand_longopts                                18       -     -18
static.unexpand_longopts                              27       -     -27
mkdir_longopts                                        28       -     -28
env_longopts                                          30       -     -30
static.ifenslave_longopts                             34       -     -34
mv_longopts                                           46       -     -46
static.rmdir_longopts                                 48       -     -48
packed_usage                                       31739   31687     -52
------------------------------------------------------------------------------
(add/remove: 2/8 grow/shrink: 3/49 up/down: 1352/-1840)      Total: -488 bytes
   text	   data	    bss	    dec	    hex	filename
 915681	    485	   6880	 923046	  e15a6	busybox_old
 915428	    485	   6876	 922789	  e14a5	busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-08-08 17:09:40 +02:00
Denys Vlasenko
de6cb41734 udhcpc[6]: fix messages referring to select() while we use poll()
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-07-24 12:01:28 +02:00
Denys Vlasenko
168f0ef8dd udhcpc[6]: on log level 1, three messages about raw socket is overkill
Move first two messages to log2 level:

08:46:32.23824 udhcpc: opening raw socket on ifindex 2
08:46:32.23825 udhcpc: got raw socket fd
08:46:32.26354 udhcpc: created raw socket

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-07-21 12:04:22 +02:00
Denys Vlasenko
ba4fbca8a8 udhcpc6: make -O OPT work
Patch is based on work by tiggerswelt.net.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-06-28 19:18:17 +02:00
Denys Vlasenko
ed820ccda1 udhcpc: do not accept --background on NOMMU (same as -b)
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-05-08 15:11:02 +02:00
Denys Vlasenko
741bfa9a72 udhcpc: fix "udhcpc -x hostname:<name> not working on nommu"
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-05-08 15:02:07 +02:00