udhcp_insert_new_option treats code for IPv6 as follows:
new->data[D6_OPT_CODE] = code >> 8;
new->data[D6_OPT_CODE + 1] = code & 0xff;
udhcp_find_option tests the code as follows:
while (opt_list && opt_list->data[OPT_CODE] < code)
...
if (opt_list && opt_list->data[OPT_CODE] == code)
So yes, OPT_CODE and D6_OPT_CODE are both 0, but the D6_OPT_CLIENTID =
1 value means that the 1 is in the seconds byte, and udhcp_find_option
is only looking at the first byte, So the send_d6_release can never
find it the created option.
function old new delta
udhcp_find_option 28 53 +25
attach_option 276 284 +8
udhcpc6_main 2602 2607 +5
perform_d6_release 262 267 +5
udhcpd_main 1518 1520 +2
udhcpc_main 2542 2544 +2
add_serverid_and_clientid_options 46 48 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 7/0 up/down: 49/0) Total: 49 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
...and we did not error-check it, and this is the only use of it:
function old new delta
inet_addr 37 - -37
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Even though it is _meant to be_ an IP address, in the wild servers sometimes
give bogus server ids, like 1.1.1.1
function old new delta
udhcpc_main 2551 2542 -9
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
"-x vendor:VENDOR" will not be a trivial replacement of it:
(1) by default, we do send a vendor string ("udhcp BB_VER"),
will need code to preserve the default.
(2) -V '' currently disables vendor string. -x vendor:''
would not easily achieve that: it adds no option at all
(string options can't be empty), and default (1) would trigger.
To avoid that, we will need yet another hack to detect
-x vendor:'' and interpret that as "no vendor string at all".
IOW: removing -V is likely to increase code size, not decrease.
function old new delta
udhcpc_main 2563 2555 -8
.rodata 103251 103198 -53
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-61) Total: -61 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This restores old behavior where we slept for 1/2 of lease, then tried renewing,
thel slept for 1/4 and tried again, etc. But now we will NOT be listening to
all packets for 1/2 of lease time, processing (rejecting) everyone else's
DHCP traffic.
We'll go back to bound state, where we have no listening socket at all.
function old new delta
udhcpc6_main 2600 2655 +55
udhcpc_main 2608 2625 +17
.rodata 103250 103249 -1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 72/-1) Total: 71 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
client_data.vendorclass, .hostname and .fqdn probably need the same treatment:
just insert them into the list of -x opts, get rid of
if (client_data.vendorclass)
udhcp_add_binary_option(packet, client_data.vendorclass);
if (client_data.hostname)
udhcp_add_binary_option(packet, client_data.hostname);
if (client_data.fqdn)
udhcp_add_binary_option(packet, client_data.fqdn);
function old new delta
udhcp_insert_new_option - 166 +166
perform_release 171 207 +36
perform_d6_release 227 259 +32
udhcpc6_main 2558 2580 +22
init_d6_packet 103 84 -19
udhcpc_main 2585 2564 -21
attach_option 397 253 -144
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/3 up/down: 256/-184) Total: 72 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
As reported in bug 13776, before this fix the renew never times out.
function old new delta
udhcpc_main 2541 2585 +44
udhcpc6_main 2567 2558 -9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 44/-9) Total: 35 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This allows to fix a problem that we wait for renew replies
for up to half the lease (!!!) if they never come.
Make it so that lease of 60 seconds is not "rounded up" to 120 seconds -
set lower "sanity limit" to 30 seconds.
After 3 failed renew attempts, switch to rebind.
After this change, we can have more flexible choice of when to do
the first renew - does not need to be equal to lease / 2.
function old new delta
udhcpc6_main 2568 2576 +8
.rodata 103339 103294 -45
udhcpc_main 2609 2550 -59
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/2 up/down: 8/-104) Total: -96 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
There are cases where binding to source IP and
destination IP is insufficient to guarantee sane
xmit netdev.
One case where this can fail is when
route-matching netdev carrier is down (cable
unplugged, wifi disconnected), or the netdev is
admin down. Then all the IP based bindings (bind()
+ connect()) will seemingly succeed but the actual
packet can go out through a default gw path.
Depending on the network this happens on
it can create issues or false alarms. It can
also leak some subnet info across networks that
shouldn't be routed.
As such better be safe than sorry and bind to a
netdev to be sure it's used for xmit.
function old new delta
udhcp_send_kernel_packet 293 336 +43
send_packet 182 188 +6
bcast_or_ucast 37 43 +6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 55/0) Total: 55 bytes
Signed-off-by: Michal Kazior <michal@plume.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Duplicate options are currently overridden (only the last option is kept).
This leads to unexpected behavior when using long options.
The patch adds support for long options in compliance with RFC 3396.
Fixes#13136.
function old new delta
udhcp_run_script 601 725 +124
optitem_unset_env_and_free - 38 +38
putenvp 46 59 +13
static.xmalloc_optname_optval 718 717 -1
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/1 up/down: 175/-1) Total: 174 bytes
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
fill_envp now iterates over the packet only once instead of a few hundred times
using the new option scanner.
function old new delta
udhcp_scan_options - 189 +189
putenvp - 46 +46
init_scan_state - 22 +22
udhcp_get_option 227 104 -123
udhcp_run_script 835 601 -234
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 0/2 up/down: 257/-357) Total: -100 bytes
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Incorporated valid_domain_label into good_hostname to simplify the implementation.
function old new delta
static.xmalloc_optname_optval 973 958 -15
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-15) Total: -15 bytes
text data bss dec hex filename
993144 16915 1872 1011931 f70db busybox_old
993129 16915 1872 1011916 f70cc busybox_unstripped
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Back in 2007, commit 0c97c9d437 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().
This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.
Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.
This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.
The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):
Arm: -92 bytes
MIPS: -52 bytes
PPC: -1836 bytes
x86_64: -938 bytes
Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Resolved a TODO by adding support for gateway_nip parameter.
function old new delta
udhcp_run_script 792 835 +43
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was
eliminated and calls to it changed to be bb_error_msg(). The downside of
this is that daemons now log all messages to syslog at the LOG_ERR level
which makes it hard to filter errors from informational messages.
This change optionally re-introduces bb_info_msg(), controlled by a new
option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that
were removed (only in applets that set logmode to LOGMODE_SYSLOG or
LOGMODE_BOTH), and also changes informational messages in ifplugd and
ntpd.
The code size change of this is as follows (using 'defconfig' on x86_64
with gcc 7.3.0-27ubuntu1~18.04)
function old new delta
bb_info_msg - 182 +182
bb_vinfo_msg - 27 +27
static.log7 194 198 +4
log8 190 191 +1
log5 190 191 +1
crondlog 45 - -45
------------------------------------------------------------------------------
(add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes
If you don't care about everything being logged at LOG_ERR level
then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller:
function old new delta
static.log7 194 200 +6
log8 190 193 +3
log5 190 193 +3
syslog_level 1 - -1
bb_verror_msg 583 581 -2
crondlog 45 - -45
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Currently, running "udhcpc -n -b" causes udhcpc to go to background and
then exit after some time unless a lease is obtained.
It's not very useful to do so
as the calling process doesn't know
if the lease was obtained or not anyway.
The code actually tries to favor "-b" over "-n",
but doesn't clear "-n" flag while clearing "-b" after backgrounding.
So, clear "-n" flag after going into background.
This effectively makes "-b" override "-n" completely
and "-n -b" behave the same as "-b".
This allows to override default "-n" option, passed to udhcpc by ifupdown,
without recompiling busybox.
URL: https://bugs.busybox.net/11691
Signed-off-by: Andrey Mazo <ahippo@yandex.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The caps were inconsistent: timeout to renew was capped at 20 seconds,
and any renews with timeout <= 60 seconds were forced to broadcast.
function old new delta
udhcpc_main 2683 2680 -3
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This reverts "udhcpc: paranoia when using kernel UDP mode
for sending renew: server ID may be bogus".
Users complain that they do have servers behind routers
(with DHCP relays).
function old new delta
send_packet 168 166 -2
bcast_or_ucast 25 23 -2
udhcp_send_kernel_packet 301 295 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-10) Total: -10 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Fixes:
commit 52a515d187
"udhcp: use poll() instead of select()"
Feb 16 2017
udhcp_sp_read() is meant to check whether signal pipe indeed has some data to read.
In the above commit, it was changed as follows:
- if (!FD_ISSET(signal_pipe.rd, rfds))
+ if (!pfds[0].revents)
return 0;
The problem is, the check was working for select() purely by accident.
Caught signal interrupts select()/poll() syscalls, they return with EINTR
(regardless of SA_RESTART flag in sigaction). _Then_ signal handler is invoked.
IOW: they can't see any changes to fd state caused by signal haldler
(in our case, signal handler makes signal pipe ready to be read).
For select(), it means that rfds[] bit array is unmodified, bit of signal
pipe's read fd is still set, and the above check "works": it thinks select()
says there is data to read.
This accident does not work for poll(): .revents stays clear, and we do not
try reading signal pipe as we should. In udhcpd, we fall through and block
in socket read. Further SIGTERM signals simply cause socket read to be
interrupted and then restarted (since SIGTERM handler has SA_RESTART=1).
Fixing this as follows: remove the check altogether. Set signal pipe read fd
to nonblocking mode. Always read it in udhcp_sp_read().
If read fails, assume it's EAGAIN and return 0 ("no signal seen").
udhcpd avoids reading signal pipe on every recvd packet by looping if EINTR
(using safe_poll()) - thus ensuring we have correct .revents for all fds -
and calling udhcp_sp_read() only if pfds[0].revents!=0.
udhcpc performs much fewer reads (typically it sleeps >99.999% of the time),
there is no need to optimize it: can call udhcp_sp_read() after each poll
unconditionally.
To robustify socket reads, unconditionally set pfds[1].revents=0
in udhcp_sp_fd_set() (which is before poll), and check it before reading
network socket in udhcpd.
TODO:
This might still fail: if pfds[1].revents=POLLIN, socket read may still block.
There are rare cases when select/poll indicates that data can be read,
but then actual read still blocks (one such case is UDP packets with
wrong checksum). General advise is, if you use a poll/select loop,
keep all your fds nonblocking.
Maybe we should also do that to our network sockets?
function old new delta
udhcp_sp_setup 55 65 +10
udhcp_sp_fd_set 54 60 +6
udhcp_sp_read 46 36 -10
udhcpd_main 1451 1437 -14
udhcpc_main 2723 2708 -15
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/3 up/down: 16/-39) Total: -23 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
