Commit Graph

111 Commits

Author SHA1 Message Date
Denys Vlasenko
e67b80f473 udhcpc6: fix udhcp_find_option to actually find DHCP6 options
udhcp_insert_new_option treats code for IPv6 as follows:

new->data[D6_OPT_CODE] = code >> 8;
new->data[D6_OPT_CODE + 1] = code & 0xff;

udhcp_find_option tests the code as follows:

while (opt_list && opt_list->data[OPT_CODE] < code)
...
if (opt_list && opt_list->data[OPT_CODE] == code)

So yes, OPT_CODE and D6_OPT_CODE are both 0, but the D6_OPT_CLIENTID =
1 value means that the 1 is in the seconds byte, and udhcp_find_option
is only looking at the first byte,  So the send_d6_release can never
find it the created option.

function                                             old     new   delta
udhcp_find_option                                     28      53     +25
attach_option                                        276     284      +8
udhcpc6_main                                        2602    2607      +5
perform_d6_release                                   262     267      +5
udhcpd_main                                         1518    1520      +2
udhcpc_main                                         2542    2544      +2
add_serverid_and_clientid_options                     46      48      +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 7/0 up/down: 49/0)               Total: 49 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-12 17:13:54 +01:00
Denys Vlasenko
8aa626ffff udhcp: add comments, no code changes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-04 01:50:42 +02:00
Denys Vlasenko
29b53ef03f udhcp: fix build breakage on MIPS
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-20 13:38:16 +02:00
Denys Vlasenko
774020c224 udhcp: convert log1s() macro to function
function                                             old     new   delta
log1s                                                  -      15     +15
udhcp_recv_kernel_packet                             134     125      -9
d6_recv_kernel_packet                                118     109      -9
change_listen_mode                                   280     271      -9
send_packet                                          162     141     -21
udhcpc_main                                         2625    2598     -27
udhcpc6_main                                        2655    2628     -27
d6_recv_raw_packet                                   255     216     -39
udhcp_recv_raw_packet                                562     484     -78
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/8 up/down: 15/-219)          Total: -204 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-06-03 11:12:20 +02:00
Denys Vlasenko
949e9621d1 udhcpc: get rid of client_data.fqdn field
function                                             old     new   delta
attach_option                                        253     276     +23
udhcpc_main                                         2582    2588      +6
udhcpc6_main                                        2579    2571      -8
add_client_options                                   175     158     -17
udhcp_insert_new_option                              169     138     -31
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/3 up/down: 29/-56)            Total: -27 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-06-02 15:51:50 +02:00
Denys Vlasenko
265fcddd08 udhcpc: include client-id option in DECLINEs, even if it's a custom -x 61:HEX option
client_data.vendorclass, .hostname and .fqdn probably need the same treatment:
just insert them into the list of -x opts, get rid of

        if (client_data.vendorclass)
                udhcp_add_binary_option(packet, client_data.vendorclass);
        if (client_data.hostname)
                udhcp_add_binary_option(packet, client_data.hostname);
        if (client_data.fqdn)
                udhcp_add_binary_option(packet, client_data.fqdn);

function                                             old     new   delta
udhcp_insert_new_option                                -     166    +166
perform_release                                      171     207     +36
perform_d6_release                                   227     259     +32
udhcpc6_main                                        2558    2580     +22
init_d6_packet                                       103      84     -19
udhcpc_main                                         2585    2564     -21
attach_option                                        397     253    -144
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/3 up/down: 256/-184)           Total: 72 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-06-02 14:07:26 +02:00
Michal Kazior
b817699e6c udhcp: bind to device even for ucast packets
There are cases where binding to source IP and
destination IP is insufficient to guarantee sane
xmit netdev.

One case where this can fail is when
route-matching netdev carrier is down (cable
unplugged, wifi disconnected), or the netdev is
admin down. Then all the IP based bindings (bind()
+ connect()) will seemingly succeed but the actual
packet can go out through a default gw path.

Depending on the network this happens on
it can create issues or false alarms. It can
also leak some subnet info across networks that
shouldn't be routed.

As such better be safe than sorry and bind to a
netdev to be sure it's used for xmit.

function                                             old     new   delta
udhcp_send_kernel_packet                             293     336     +43
send_packet                                          182     188      +6
bcast_or_ucast                                        37      43      +6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 55/0)               Total: 55 bytes

Signed-off-by: Michal Kazior <michal@plume.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-12-15 21:44:21 +01:00
Denys Vlasenko
a90a54aead udhcp: remove struct packing attribute, eliminates gcc-9.x
"error: taking address of packed member of 'struct ip_udp_dhcp_packet'
may result in an unaligned pointer value" here:

	udhcp_dump_packet(&packet.data);

and in other places.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-10-01 23:49:16 +02:00
Martin Lewis
acdc8eed89 udhcp: add option scanner
Added an option scanner to udhcp to enable iteration over packet options.

Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-29 14:57:02 +02:00
Martin Lewis
d30d1ebc11 dhcpc: refactor xmalloc_optname_optval to shrink binary size
function                                             old     new   delta
len_of_option_as_string                               14      13      -1
dhcp_option_lengths                                   14      13      -1
udhcp_str2optset                                     641     637      -4
static.xmalloc_optname_optval                        777     718     -59
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-65)             Total: -65 bytes

Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-09 17:59:56 +02:00
Denys Vlasenko
0cad5f9b6d udhcp: comment out unused domain compression code
function                                             old     new   delta
attach_option                                        411     406      -5
dname_enc                                            381     167    -214
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-219)           Total: -219 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-09 17:22:06 +02:00
James Byrne
6937487be7 libbb: reduce the overhead of single parameter bb_error_msg() calls
Back in 2007, commit 0c97c9d437 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().

This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.

Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.

This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.

The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):

Arm:     -92 bytes
MIPS:    -52 bytes
PPC:   -1836 bytes
x86_64: -938 bytes

Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 11:35:03 +02:00
Denys Vlasenko
1115e40c88 dhcp: tweak comments, no code changes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-23 15:24:03 +02:00
James Byrne
253c4e787a Optionally re-introduce bb_info_msg()
Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was
eliminated and calls to it changed to be bb_error_msg(). The downside of
this is that daemons now log all messages to syslog at the LOG_ERR level
which makes it hard to filter errors from informational messages.

This change optionally re-introduces bb_info_msg(), controlled by a new
option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that
were removed (only in applets that set logmode to LOGMODE_SYSLOG or
LOGMODE_BOTH), and also changes informational messages in ifplugd and
ntpd.

The code size change of this is as follows (using 'defconfig' on x86_64
with gcc 7.3.0-27ubuntu1~18.04)

function                                             old     new   delta
bb_info_msg                                            -     182    +182
bb_vinfo_msg                                           -      27     +27
static.log7                                          194     198      +4
log8                                                 190     191      +1
log5                                                 190     191      +1
crondlog                                              45       -     -45
------------------------------------------------------------------------------
(add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45)           Total: 170 bytes

If you don't care about everything being logged at LOG_ERR level
then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller:

function                                             old     new   delta
static.log7                                          194     200      +6
log8                                                 190     193      +3
log5                                                 190     193      +3
syslog_level                                           1       -      -1
bb_verror_msg                                        583     581      -2
crondlog                                              45       -     -45
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48)            Total: -36 bytes

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-30 10:51:27 +02:00
Antoine Girard-Vallée
0e7bd69bb5 udhcp: add 100 and 101 dhcp options for ipv4
Support for the IEEE timezone string and timezone database strings (100
and 101 options respectively) is added for ipv4, conforming to RFC-4833.

The two options are passed to hook scripts in the variables tzstr and
tzdbstr.

function                                             old     new   delta
dhcp_option_strings                                  280     294     +14
dhcp_optflags                                         76      80      +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 18/0)               Total: 18 bytes

Signed-off-by: Antoine Girard-Vallée <antoine.girard-vallee@savoirfairelinux.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-13 16:27:26 +02:00
Denys Vlasenko
edb74f4019 Update examples/udhcp/udhcpd.conf
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-01-15 13:19:01 +01:00
Denys Vlasenko
74d9f1ba37 udhcpc: when decoding DHCP_SUBNET, ensure it is 4 bytes long
function                                             old     new   delta
udhcp_run_script                                     795     801      +6

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-01-07 15:33:42 +01:00
Denys Vlasenko
6d3b4bb24d udhcpc: check that 4-byte options are indeed 4-byte, closes 11506
function                                             old     new   delta
udhcp_get_option32                                     -      27     +27
udhcp_get_option                                     231     248     +17
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/0 up/down: 44/0)               Total: 44 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-12-17 18:07:18 +01:00
Denys Vlasenko
2cd81698ee udhcp: add decimal option values in comments, no code changes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-04 16:05:48 +02:00
Jeremy Kerr
fc267214f0 udhcp: add option 211, "reboot time"
As defined in RFC 5071.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-04 15:38:19 +02:00
Denys Vlasenko
148788eb0e udhcpc: remove code which requires server ID to be on local network
This reverts "udhcpc: paranoia when using kernel UDP mode
for sending renew: server ID may be bogus".

Users complain that they do have servers behind routers
(with DHCP relays).

function                                             old     new   delta
send_packet                                          168     166      -2
bcast_or_ucast                                        25      23      -2
udhcp_send_kernel_packet                             301     295      -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-10)             Total: -10 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-06-21 17:38:14 +02:00
Denys Vlasenko
6027597fd1 udhcpc6: set -x options in request
Last foru commits:

function                                             old     new   delta
option_to_env                                        621     791    +170
.rodata                                           168351  168505    +154
attach_option                                        431     506     +75
add_d6_client_options                                112     167     +55
d6_option_strings                                     30      84     +54
udhcp_str2optset                                     644     660     +16
d6_optflags                                           12      20      +8
udhcpc6_main                                        2590    2596      +6
udhcpc_main                                         2648    2651      +3
read_optset                                           15      18      +3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 10/0 up/down: 544/0)            Total: 544 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-05-14 11:11:08 +02:00
Denys Vlasenko
3293bc1469 udhcpd: fix "not dying on SIGTERM"
Fixes:
	commit 52a515d187
	"udhcp: use poll() instead of select()"
	Feb 16 2017

udhcp_sp_read() is meant to check whether signal pipe indeed has some data to read.
In the above commit, it was changed as follows:

-	if (!FD_ISSET(signal_pipe.rd, rfds))
+	if (!pfds[0].revents)
		return 0;

The problem is, the check was working for select() purely by accident.
Caught signal interrupts select()/poll() syscalls, they return with EINTR
(regardless of SA_RESTART flag in sigaction). _Then_ signal handler is invoked.
IOW: they can't see any changes to fd state caused by signal haldler
(in our case, signal handler makes signal pipe ready to be read).

For select(), it means that rfds[] bit array is unmodified, bit of signal
pipe's read fd is still set, and the above check "works": it thinks select()
says there is data to read.

This accident does not work for poll(): .revents stays clear, and we do not
try reading signal pipe as we should. In udhcpd, we fall through and block
in socket read. Further SIGTERM signals simply cause socket read to be
interrupted and then restarted (since SIGTERM handler has SA_RESTART=1).

Fixing this as follows: remove the check altogether. Set signal pipe read fd
to nonblocking mode. Always read it in udhcp_sp_read().
If read fails, assume it's EAGAIN and return 0 ("no signal seen").

udhcpd avoids reading signal pipe on every recvd packet by looping if EINTR
(using safe_poll()) - thus ensuring we have correct .revents for all fds -
and calling udhcp_sp_read() only if pfds[0].revents!=0.

udhcpc performs much fewer reads (typically it sleeps >99.999% of the time),
there is no need to optimize it: can call udhcp_sp_read() after each poll
unconditionally.

To robustify socket reads, unconditionally set pfds[1].revents=0
in udhcp_sp_fd_set() (which is before poll), and check it before reading
network socket in udhcpd.

TODO:
This might still fail: if pfds[1].revents=POLLIN, socket read may still block.
There are rare cases when select/poll indicates that data can be read,
but then actual read still blocks (one such case is UDP packets with
wrong checksum). General advise is, if you use a poll/select loop,
keep all your fds nonblocking.
Maybe we should also do that to our network sockets?

function                                             old     new   delta
udhcp_sp_setup                                        55      65     +10
udhcp_sp_fd_set                                       54      60      +6
udhcp_sp_read                                         46      36     -10
udhcpd_main                                         1451    1437     -14
udhcpc_main                                         2723    2708     -15
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/3 up/down: 16/-39)            Total: -23 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-03-10 19:34:39 +01:00
Denys Vlasenko
a6a3ad3273 udhcpc: paranoia when using kernel UDP mode for sending renew: server ID may be bogus
With new code, we request that target IP (server ID) must be directly reachable.
If it's not, this happens:

udhcpc: waiting 2000 seconds
udhcpc: entering listen mode: kernel
udhcpc: opening listen socket on *:68 wlan0
udhcpc: entering renew state
udhcpc: sending renew to 1.1.1.1
udhcpc: send: Network is unreachable
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1.1.1.1 needs routing, this is fishy!
udhcpc: entering rebinding state
udhcpc: entering listen mode: raw
udhcpc: created raw socket
udhcpc: sending renew to 0.0.0.0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ going to use broadcast

which is the desired behavior. Before the patch, packet to 1.1.1.1 was routed
over eth0 (!) and maybe even into Internet (!!!).

function                                             old     new   delta
udhcpc_main                                         2752    2763     +11
udhcp_send_kernel_packet                             295     301      +6
send_renew                                            82      84      +2
send_packet                                          166     168      +2
bcast_or_ucast                                        23      25      +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/0 up/down: 23/0)               Total: 23 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-29 16:02:11 +02:00
Denys Vlasenko
4ee824f6ba randomconfig fixes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-07-03 01:22:13 +02:00
Denys Vlasenko
ba4fbca8a8 udhcpc6: make -O OPT work
Patch is based on work by tiggerswelt.net.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-06-28 19:18:17 +02:00
Denys Vlasenko
52a515d187 udhcp: use poll() instead of select()
function                                             old     new   delta
udhcp_sp_read                                         65      46     -19
udhcp_sp_fd_set                                       79      54     -25
udhcpd_main                                         1530    1482     -48
udhcpc_main                                         2780    2730     -50
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-142)           Total: -142 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-16 23:25:44 +01:00
Denys Vlasenko
e6a2f4cc5a libbb: make bb_common_bufsiz1 1 kbyte, add capability to use bss tail for it
The config item is FEATURE_USE_BSS_TAIL. When it is off (default):

function                                             old     new   delta
read_config                                          210     228     +18
doCommands                                          2279    2294     +15
ipneigh_list_or_flush                                763     772      +9
ipaddr_list_or_flush                                1256    1261      +5
display_process_list                                1301    1306      +5
conspy_main                                         1378    1383      +5
do_lzo_compress                                      352     355      +3
do_lzo_decompress                                    565     567      +2
push                                                  46      44      -2
inetd_main                                          2136    2134      -2
uevent_main                                          421     418      -3
addLines                                              97      92      -5
bb_common_bufsiz1                                   8193    1024   -7169
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 8/5 up/down: 62/-7181)        Total: -7119 bytes
   text	   data	    bss	    dec	    hex	filename
 829850	   4086	   9080	 843016	  cdd08	busybox_old
 829901	   4086	   1904	 835891	  cc133	busybox_unstripped

FEATURE_USE_BSS_TAIL=y:

read_config                                          210     228     +18
doCommands                                          2279    2294     +15
ipneigh_list_or_flush                                763     772      +9
ipaddr_list_or_flush                                1256    1261      +5
display_process_list                                1301    1306      +5
conspy_main                                         1378    1383      +5
do_lzo_compress                                      352     355      +3
do_lzo_decompress                                    565     567      +2
inetd_main                                          2136    2134      -2
bb_common_bufsiz1                                   8193       -   -8193
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 8/1 up/down: 62/-8195)        Total: -8133 bytes
   text	   data	    bss	    dec	    hex	filename
 829850	   4086	   9080	 843016	  cdd08	busybox_old
 829911	   4086	    880	 834877	  cbd3d	busybox_unstripped

FIXME: setup_common_bufsiz() calls are missing.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21 17:39:11 +02:00
Denys Vlasenko
8f2e99c813 udhcp: get rid of bb_info_msg()
function                                             old     new   delta
udhcpd_main                                         1501    1531     +30
d6_recv_raw_packet                                   251     264     +13
perform_d6_release                                   188     198     +10
udhcpc6_main                                        2443    2449      +6
udhcp_recv_raw_packet                                582     588      +6
udhcp_recv_kernel_packet                             132     138      +6
send_d6_renew                                        140     146      +6
d6_recv_kernel_packet                                118     124      +6
send_renew                                            77      82      +5
send_discover                                         85      90      +5
send_decline                                          84      89      +5
send_d6_select                                        97     102      +5
send_d6_discover                                     174     179      +5
perform_release                                      167     172      +5
count_lines                                           72      74      +2
udhcpc_main                                         2836    2837      +1
bb_info_msg                                          125       -    -125
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 17/4 up/down: 117/-180)         Total: -63 bytes
   text	   data	    bss	    dec	    hex	filename
 924935	    906	  17160	 943001	  e6399	busybox_old
 924736	    906	  17160	 942802	  e62d2	busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-30 18:41:23 +02:00
Michel Stam
9f41271f3c udhcpd: add option for tweaking arpping
Some clients have a very short timeout for sending the DHCP
DISCOVER, shorter than the arpping timeout of 2000 milliseconds
that udhcpd uses by default.

This patch allows tweaking the timeout, or disabling of arpping
altogether, at the risk of handing out addresses which are
already in use.

function                                             old     new   delta
udhcpd_main                                         1460    1501     +41
udhcpc_main                                         2814    2851     +37
packed_usage                                       29957   29974     +17
arpping                                              477     493     +16
find_free_or_expired_nip                             161     174     +13
send_offer                                           285     292      +7
nobody_responds_to_arp                                85      89      +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 7/0 up/down: 135/0)             Total: 135 bytes

Signed-off-by: Michel Stam <m.stam@fugro.nl>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-10-30 11:59:04 +01:00
Jeremy Kerr
b8ffd11e65 udhcp: add PXELINUX path prefix option (code 210) definition
Like d3092c99, this change adds support for the DHCP "path-prefix"
option, as defined in RFC 5071. We use the string identifer
"pxepathprefix".

Adding this option makes string parsing in the hook scripts simpler.

function                                             old     new   delta
dhcp_option_strings                                  255     269     +14
dhcp_optflags                                         72      74      +2

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-07-16 14:21:42 +02:00
Jeremy Kerr
d3092c99ae udhcp: add PXELINUX config file option (code 209) definition
This change adds a definition for DHCP option 209. RFC 5071 defines code
209 as a configuration file for a PXE bootloader; this change uses
the string "pxeconffile" as its text identifier.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-11-12 11:18:26 +01:00
Denys Vlasenko
5cfb818181 Add yet another missing ALIGN2 on a global declaration.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-07-26 12:58:41 +02:00
Michael Tokarev
32f774cd34 *: declare strings with ALIGN1, as appropriate
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-07-24 15:56:37 +02:00
Denys Vlasenko
7280d2017d udhcpc: sanitize hostnames in incoming packets. Closes 3979.
The following options are replaced with string "bad" if they
contain malformed hostname:
HOST_NAME, DOMAIN_NAME, NIS_DOMAIN, TFTP_SERVER_NAME

function                                             old     new   delta
xmalloc_optname_optval                               850     888     +38
attach_option                                        440     443      +3
len_of_option_as_string                               13      14      +1
dhcp_option_lengths                                   13      14      +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/0 up/down: 43/0)               Total: 43 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2011-12-08 16:41:05 +01:00
Denys Vlasenko
a092a89d8f udhcpc6: rudimentary code to export data to script; fix IAADDR parsing
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2011-11-16 20:17:12 +01:00
Denys Vlasenko
f461385521 typo fix in comment
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2011-10-20 08:54:16 +02:00
Denys Vlasenko
1f56e51ca1 udhcpc: add support for DHCP option 212 (RFC 5969)
The patch is from OpenWRT people.

function                                             old     new   delta
xmalloc_optname_optval                               637     874    +237
dhcp_option_strings                                  237     243      +6
dhcp_optflags                                         68      70      +2
len_of_option_as_string                               12      13      +1
dhcp_option_lengths                                   12      13      +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/0 up/down: 247/0)             Total: 247 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2011-10-19 22:40:35 +02:00
Leonid Lisovskiy
6c9c0a1dc9 udhcp: IF_UDHCP_VERBOSE() macro - improve code readability
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2011-10-18 00:35:47 +02:00
Baruch Siach
289c47b049 udhcp: remove the declaration of non-existent udhcp_checksum
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2011-09-09 11:03:45 +02:00
Nigel Hathaway
fb6b173ff7 udhcp: add FEATURE_UDHCP_8021Q option
function                                             old     new   delta
dhcp_option_strings                                  217     237     +20
dhcp_optflags                                         64      68      +4

Signed-off-by: Nigel Hathaway <Nigel.Hathaway@ubiquisys.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2011-04-26 02:50:00 +02:00
Denys Vlasenko
2c3b71a0d2 dhcp: typo fix: UPD_DHCP_SIZE -> UDP_DHCP_SIZE
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
2010-10-20 18:04:36 +02:00
Vladislav Grishenko
7d3a48a003 udhcp: add support for 0x21 ROUTES and 0xf9 MS_STATIC_ROUTES options
Signed-off-by: Vladislav Grishenko <themiron@mail.ru>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-09-26 00:15:12 +02:00
Denys Vlasenko
0ef64bdb40 *: make GNU licensing statement forms more regular
This change retains "or later" state! No licensing _changes_ here,
only form is adjusted (article, space between "GPL" and "v2" and so on).

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-08-16 20:14:46 +02:00
Denys Vlasenko
e58c6e2e13 dhcp: indicate IP network order in prototypes too
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-05-30 23:43:35 +02:00
Denys Vlasenko
b7d19cc400 dhcp: readability cleanups and small code shrink
function                                             old     new   delta
udhcp_run_script                                     654     617     -37

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-05-30 23:41:23 +02:00
Denys Vlasenko
4f3aa51f9d udhcp: implement "raw" binary options. Closes bug 735
function                                             old     new   delta
allocate_tempopt_if_needed                             -      76     +76
udhcp_str2optset                                     351     415     +64
attach_option                                        380     398     +18
len_of_option_as_string                               11      12      +1
dhcp_option_lengths                                   11      12      +1
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 4/0 up/down: 160/0)             Total: 160 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-04-04 15:31:12 +02:00
Denys Vlasenko
c03602baa4 udhcp: s/dhcp_option/dhcp_optflag/g
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-04-04 15:28:49 +02:00
Denys Vlasenko
243ddcbc76 udhcpd: support decoding of option 120 "SIP servers". Closes bug 737
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-04-03 17:34:52 +02:00
Denys Vlasenko
9107b63a7f udhcp: abort if we see unknown option, and show valid options if so
function                                             old     new   delta
udhcp_option_idx                                       -      77     +77
udhcp_str2optset                                     366     351     -15
udhcpc_main                                         2845    2801     -44
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/2 up/down: 77/-59)             Total: 18 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-03-27 23:23:41 +01:00