Hello,
Here's a patch for a first attempt at static leases for udhcpd.
Included in the tarball are 2 files (static_leases.c, static_leases.h)
and a patch against the latest cvs.
In the config file you can configure static leases with the following
format:
static_lease 00:60:08:11:CE:4E 192.168.0.54
static_lease 00:60:08:11:CE:3E 192.168.0.44
Comments/suggestions/improvements are welcome.
Wade
>I also don't mean to disagree about leaving 30x status codes until after
>1.0. In fact, although redirecting http://host/dir to http://host/dir/
>with a 301 is common practice (e.g. Apache, IIS), AFAIK it isn't
>actually required (or mentioned) by the HTTP specs.
Ok.
Attached patch have 302 and 408 implemented features.
--w
vodz
Hi!
I've created a patch to busybox' build system to allow building it in
separate tree in a manner similar to kbuild from kernel version 2.6.
That is, one runs command like
'make O=/build/some/where/for/specific/target/and/options'
and everything is built in this exact directory, provided that it exists.
I understand that applyingc such invasive changes during 'release
candidates' stage of development is at best unwise. So, i'm currently
asking for comments about this patch, starting from whether such thing
is needed at all to whether it coded properly.
'make check' should work now, and one make creates Makefile in build
directory, so one can run 'make' in build directory after that.
One possible caveat is that if we build in some directory other than
source one, the source directory should be 'distclean'ed first.
egor
Ming-Ching,
>>No. Here there are no mistakes.
>>You using POST metod.
>>For get data you should read from stdin CONTENT_LENGTH bytes.
>Hower as I posted a little while ago, there is indeed a bug
>in POST method if the CONTENT_LENGTH is bigger
>than sizeof(wbuf[128]). So if your CGI script is expecting to
>read the full CONTENT_LENGTH, it might block forever,
>because it will only transfer sizeof(wbuf) to the CGI.
Ok, Ok. I should find time to understand with a problem.
Try attached patch.
--w
vodz
"I have a need to _really_ know if the interface was properly configured
via ifup so I made busybox's ifupdown pass the return codes through rather
than dropping them on the floor."
"All the functions in ifupdown.c return 1 on success and 0 on failure
(which happens to the opposite of standard practices but whatever).
So it is important for all these functions to not blindly return 1."
"The problem with blindly returning ret, even if it is != 1, is the
callers expect a 0 or 1 and accumulate the return codes. So a function that
makes 3 calls to execute will have a value of 3 accumulated. That value
of 1 (success) was almost always returned even if 1 of the commands in the
command sequence failed. The attached patch fixes the lack of checking
to verify thar result == expected_reult."
Hi,
Package: BusyBox
Version: 1.0.0-pre10
When an incomplete read or write from/to a local file occurs (i.e.
not an EOF condition), the tftp client prematurely exits. This
problem can be reproduced by slowly piping data to the tftp client
like this:
(for v in 1 2 3; do echo $v; sleep 1; done) | \
tftp -p -l - -r output.txt <host>
The output file on the TFTP server will contain "1".
The attached patch provides a possible solution to this problem.
I can reproduce this on ARM sa1110 and ARM xscale boards, both
running Linux-2.6.4 & glibc-2.3.2. Thanks for the wonderful
program!
Robin
On Sat, Jun 19, 2004 at 10:57:37PM +0200, Bastian Blank wrote:
> The following patch changes klogd to use openlog/syslog themself
> instead of calling syslog_msg which always calls the triple
> openlog/syslog/closelog.
Updated patch: get rid of syslog_msg entirely. Request from Erik Andersen.
Bastian
Package: BusyBox
Version: 1.0.0-pre10
Passing the -q <integer> option to inetd causes it to dereference an
invalid pointer (optarg). The attached patch provides a fix to this
problem.
Robin
Hello,
Last November a bug was found in iproute. CAN-2003-0856 has more information.
Basically, netlink packets can come from any user. If a program performs action
based on netlink packets, they must be examined to make sure they came from the
place they are expected (the kernel).
Attached is a patch against pre8. Please apply this before releasing 1.00 final.
All users of busy box may be vulnerable to local attacks without it.
Best Regards,
Steve Grubb
Hi,
the following output is from BusyBox 1.0.0-pre10:
~ # ip link help
ip: Command "help" is unknown, try "ip link help".
tk
This patch fixes it by removing the advertisements for
the "ip blah help" stuff that is not implemented.
This is a bulk spelling fix patch against busybox-1.00-pre10.
If anyone gets a corrupted copy (and cares), let me know and
I will make alternate arrangements.
Erik - please apply.
Authors - please check that I didn't corrupt any meaning.
Package importers - see if any of these changes should be
passed to the upstream authors.
I glossed over lots of sloppy capitalizations, missing apostrophes,
mixed American/British spellings, and German-style compound words.
What is "pretect redefined for test" in cmdedit.c?
Good luck on the 1.00 release!
- Larry
In arpping.h, fix structure alignment of "struct arpMsg".
GCC can insert padding in the structure which causes udhcpd to send an
invalid ARP packet on the network. It will then not receive a valid
reply, which can cause it to assign an IP address that's already in use
on the network.
(With kernels before 2.4.20, the "struct ethhdr" in linux/if_ether.h
wasn't marked as packed. This is also an issue if your toolchain was
built with a pre-2.4.20 kernel).
Hi,
When downloading files over slow network (e.g. wireless/
internet) using IE, sometimes it will stop downloading and
show error message 'connection closed' when the download
is almost complete. This is because IE can't handle server
close connection properly.
Apache http_main.c fix this problem by close the connection
after client close the connection. This patch do exactly the
same thing. Please consider include this patch.
Joe.C
Hi,
Well, I made this patch a long time ago (08/2002) because it was a
need of a project, but had no time to send it to you. It adds support
to `autologin' option of the telnet protocol. It has been used since
made with busybox 0.60.3 at production and I had no problems with it.
I have ported it to the HEAD revision of the CVS server (20040211) and
I hope you enjoy and apply it to the official sources. :)
Thanks a lot!
The config file processing for inetd in busybox-1.00-pre7 and newer
is broken -- the saved command argv[] values overwrite each other.
Patch to fix it is attached.
Cheers
--
Mark Lord
Real-Time Remedies Inc.
Hi,
When httpd connection is closed, bosybox httpd will
not stop reading from CGI program. This patch fix this
problem. It check the return value of bb_full_write and
stop reading from CGI if the connection is closed.
Please apply this patch.
Joe.C
uuencode fails to encode binary data because it right-shifts
bytes as signed chars and keeps the duplicated sign bits.
The original base64_encode() from wget/http.c is broken as well,
but it is only used to encode ascii data.
-- Pascal
function as there is no gracefull way of handling failures.
Rename bb_getport to bb_lookup_port, allow a default port to be
specified so it always returns a correct value.
Modify ftpgetput/rdate/wget to use the new interface.
wget/rdate now use etc/services with a falback default value.
Another issue I found was with the iproute utility. While using another
program I found that it failed because the "ip route del" command was
not found. I looked at the full iproute implementation and this command
exists. The busybox version has the "ip route delete" command. I have
created a patch which makes the "ip route del" command an alias to the
"ip route delete" command.
Hello,
I have been using busybox for some time now, for an ARM based platform.
I was very pleased when I tried the 1.00preX series, with all the new
utilities and daemons.
I found out that the ifupdown in busybox does not behave exaclty like
the debian version. Then the pre-up script fails, the interface is
getting up. Also when the post-up script fails the return value is
ignored. Actually everything is always run and the return value is
always true. I looked at the original implementation from debian and
fixed the busybox version to do the same. A patch is attached if anyone
is interested.
