Add support for MD5 message authentication as described in RFC 5905.
This patch also supports SHA1 authentication.
The key file format is the same file format as used by ntpd.
The configuration file format follows standard Unix conventions
(# comments) with lines consist of the following fields separated by whitespace:
<key identifier, [1,65535]> <SHA1|MD5> <an ASCII string of up to 20 characters|an octet string [a-zA-F0-9] of up to 40 characters>.
https://www.ietf.org/rfc/rfc5905.txt
function old new delta
ntp_init 473 987 +514
hash - 125 +125
recv_and_process_peer_pkt 889 961 +72
packed_usage 33066 33130 +64
ntpd_main 1226 1277 +51
find_key_entry - 29 +29
add_peers 195 207 +12
recv_and_process_client_pkt 509 514 +5
------------------------------------------------------------------------------
(add/remove: 2/0 grow/shrink: 6/0 up/down: 872/0) Total: 872 bytes
Signed-off-by: Brandon P. Enochs <enochs.brandon@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Support the "source-directory" stanza from ifupdown[1]. source-directory
will include all files in the named directory. Similar to the Busybox
version of the "source" stanza, this version of source-directory does
not currently support shell wildcards.
We only check that the stanza starts with "source-dir" as ifupdown does[2].
[1] https://manpages.debian.org/stretch/ifupdown/interfaces.5.en.html#INCLUDING_OTHER_FILES
[2] https://salsa.debian.org/debian/ifupdown/blob/0.8.33/config.c#L498
function old new delta
read_interfaces 1150 1241 +91
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The caps were inconsistent: timeout to renew was capped at 20 seconds,
and any renews with timeout <= 60 seconds were forced to broadcast.
function old new delta
udhcpc_main 2683 2680 -3
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Managed to make ntpd on one of my machines to be stuck getting
"root distance too high" all the time, but log is not giving me
more informatin what exactly is happening...
function old new delta
select_and_cluster 1045 1095 +50
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If fgets() returns incomplete string, we replace NUL with
'\n', and then trim() runs on a non-NUL-terminated buffer.
Prevent that.
While at it, bump buffer from 1k to 2k.
function old new delta
query 519 524 +5
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
On fast network, I've seen "delay:0.002000" shown for all packets,
thus completely losing information on what real delays are.
The new code is careful to not reject packets with tiny delays
if the delay "grows a lot" but is still tiny:
0.000009 is "much larger" than 0.000001 (nine times larger),
but is still very good small delay.
function old new delta
recv_and_process_peer_pkt 863 889 +26
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This means we'll start correcting frequency ~5 minutes after start,
not ~3.5 ones.
With previos settings I still often see largish ~0.7s initial offsets
only about 1/2 corrected before frequency correction kicks in,
resulting in ~200ppm "correction" which is then slowly undone.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The "fix fetching of https URLs with http proxy" commit
broke the usual http-to-https redirect:
$ wget http://busybox.net/downloads/busybox-1.29.0.tar.bz2
Connecting to busybox.net (140.211.167.122:80)
Connecting to busybox.net (140.211.167.122:443)
wget: server returned error: HTTP/1.1 400 Bad Request
Fixing...
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The syntax of public key certificates can be found in RFC 5280 section
4.1. The relevant part of the syntax is the following:
TBSCertificate ::= SEQUENCE {
version [0] EXPLICIT Version DEFAULT v1,
serialNumber CertificateSerialNumber,
... remaining fields omitted ...
}
The version field has a default value of v1. RFC 5280 section 4.1.2.1
says the following:
If only basic fields are present, the version SHOULD be 1 (the value
is omitted from the certificate as the default value); however, the
version MAY be 2 or 3.
To help detect if the version field is present or not, the type of the
version field has an explicit tag of [0]. Due to this tag, if the
version field is present, its encoding will have an identifier octet
that is distinct from that of the serialNumber field.
ITU-T X.690 specifies how a value of such a type should be encoded with
DER. There is a PDF of X.690 freely available from ITU-T. X.690 section
8.1.2 specifies the format of identifier octets which is the first
component of every encoded value. Identifier octets encode the tag of a
type. Bits 8 and 7 encode the tag class. Bit 6 will be 0 if the encoding
is primitive and 1 if the encoding is constructed. Bits 5 to 1 encode
the tag number.
X.690 section 8.14 specifies what the identifier octet should be for
explicitly tagged types. Section 8.14.3 says if implicit tagging is not
used, then the encoding shall be constructed. The version field uses
explicit tagging and not implicit tagging, so its encoding will be
constructed. This means bit 6 of the identifier octet should be 1.
X.690 section 8.14 and Annex A provide examples. Note from their
examples that the notation for tags could look like [APPLICATION 2]
where both the tag class and tag number are given. For this example, the
tag class is 1 (application) and the tag number is 2. For notation like
[0] where the tag class is omitted and only the tag number is given, the
tag class will be context-specific.
Putting this all together, the identifier octet for the DER encoding of
the version field should have a tag class of 2 (context-specific), bit 6
as 1 (constructed), and a tag number of 0.
Signed-off-by: Ivan Abrea <ivan@algosolutions.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Update QoS markers.
Use DSCP AF21 for interactive traffic. DSCP is defined in RFC2474.
Many modern equipment no longer support IPTOS.
Signed-off-by: Codarren Velvindron <codarren@hackers.mu>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This reverts "udhcpc: paranoia when using kernel UDP mode
for sending renew: server ID may be bogus".
Users complain that they do have servers behind routers
(with DHCP relays).
function old new delta
send_packet 168 166 -2
bcast_or_ucast 25 23 -2
udhcp_send_kernel_packet 301 295 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-10) Total: -10 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Kconfig-language.txt was deleted in commit 4fa499a17b back in 2006.
Move to docs/ as suggested by Xabier Oneca:
http://lists.busybox.net/pipermail/busybox/2014-May/080914.html
Also update references to it everywhere.
Signed-off-by: Kartik Agaram <akkartik@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This is to avoid parsing garbage past packet's actual end.
Also const-ize params to a few functions.
function old new delta
d6_run_script_no_option - 12 +12
option_to_env 791 798 +7
d6_run_script 253 255 +2
perform_d6_release 95 93 -2
udhcpc6_main 2596 2592 -4
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/2 up/down: 21/-6) Total: 15 bytes
Signed-off-by: David Decotigny <ddecotig@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add support for the PXELINUX options 209 ("ConfigFile") and 210
("PathPrefix") in the DHCPv6 client.
See also: RFC5071, "Dynamic Host Configuration Protocol Options Used by
PXELINUX".
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add support for 'bootfile-url' and 'bootfile-params' as defined by
RFC5970 "DHCPv6 Options for Network Boot".
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add string_option_to_env() to easily generate environment variables for
known simple options.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
trim() modifies the string in place if needed and returns a pointer to
the end of the resulting string. Update udhcp_str2optset() so it no
longer sets the value of 'val' to the return value of trim().
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If server replied with 302 and
Location: ?foo
we used to underflow the allocated space while trying to form the "@foo"
filename. Switch to forming "foo" filename.
function old new delta
packed_usage 32795 32799 +4
parse_url 387 352 -35
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 4/-35) Total: -31 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Usage: nslookup [-type=QUERY_TYPE] [-debug] HOST [DNS_SERVER]
Query DNS about HOST
QUERY_TYPE: soa,ns,a,aaaa,cname,mx,txt,ptr,any
function old new delta
packed_usage 32189 32258 +69
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Instead, simply don't send this header.
On Mon, Apr 2, 2018 at 8:17 PM, xisd <xisd-dev@riseup.net> wrote:
> I had some trouble using busybox httpd to serve a static website and I
> thought the issue might be of interest.
>
> My problem is related to something that seem quite common for static
> site generator : the use of html files without the '.html' extension
> (it is called 'clean url'...)
>
> Most web server guess that these files are html and display them like
> any other .html files.
>
> From what I understood, the MIME type for files without extension in
> busybox htttp default settings is 'application/octet-stream', and
> because of that 'clean url' pages are not displayed.
>
> It is only trouble because I wanted to deploy my website on freshly
> installed linux without editing any configuration.
>
> The default MIME setting make sense to me as it is, I just thought that
> might be worth mentioning since the use of 'clean url' seem to be a
> common practice for static sites generators (the one I use is callled
> 'yellow' (https://github.com/datenstrom/yellow))
>
> Here is a link for the related issue on github :
> https://github.com/datenstrom/yellow/issues/317
function old new delta
send_headers 702 718 +16
send_headers_and_exit 23 20 -3
handle_incoming_and_exit 2794 2791 -3
send_file_and_exit 772 756 -16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/3 up/down: 16/-22) Total: -6 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When using ifplugd on a RNDIS interface with monitor mode, using
SIOCSIFFLAGS seems to fail with EADDRNOTAVAIL. Treat it the same
as if iface disappeared again.
This has been observed on a Tegra TK1 using Linux 4.14. There seem
to be a race when the kernel is creating the device:
ifplugd(usb0): started: BusyBox v1.24.1 (2018-03-27 09:47:48 CEST)
ifplugd(usb0): interface doesn't exist, waiting
ifplugd(usb0): interface appeared
ifplugd(usb0): upping interface
ifplugd(usb0): setting interface flags failed: Cannot assign requested address
<exit>
With this patch ifplugd is successful in upping the device the second
time around:
ifplugd(usb0): upping interface
ifplugd(usb0): using SIOCETHTOOL detection mode
ifplugd(usb0): interface appeared
ifplugd(usb0): upping interface
ifplugd(usb0): setting interface flags failed: Cannot assign requested address
ifplugd(usb0): interface appeared
ifplugd(usb0): upping interface
ifplugd(usb0): using SIOCETHTOOL detection mode
ifplugd(usb0): link is up
ifplugd(usb0): executing '/etc/ifplugd/ifplugd.usb.action usb0 up'
ifplugd up
ifplugd(usb0): exit code: 0
function old new delta
up_iface 120 127 +7
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Interface may not exist because it got deleted by an ifdown hook script
earlier. This may happen when a virtual interface, such as VLAN, has multiple
iface blocks defined.
function old new delta
static_down6 14 40 +26
static_down 54 70 +16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 42/0) Total: 42 bytes
Signed-off-by: Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If we don't ask for numerical output, and the symbolic look-up failed
we used to get "(null)", but the numeric output would be better.
function old new delta
ip_port_str 109 121 +12
Signed-off-by: Mark Marshall <mark.marshall@omicronenergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The wrong character was used to indicate options taking an integer
parameter.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
EINTR _should_ only happen on two signals we trap, and safe_poll
_should_ work here just fine, but there were kernel bugs where spurious EINTRs
happen (e.g. on ptrace attach). Be safe.
function old new delta
udhcpd_main 1437 1468 +31
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Fixes:
commit 52a515d187
"udhcp: use poll() instead of select()"
Feb 16 2017
udhcp_sp_read() is meant to check whether signal pipe indeed has some data to read.
In the above commit, it was changed as follows:
- if (!FD_ISSET(signal_pipe.rd, rfds))
+ if (!pfds[0].revents)
return 0;
The problem is, the check was working for select() purely by accident.
Caught signal interrupts select()/poll() syscalls, they return with EINTR
(regardless of SA_RESTART flag in sigaction). _Then_ signal handler is invoked.
IOW: they can't see any changes to fd state caused by signal haldler
(in our case, signal handler makes signal pipe ready to be read).
For select(), it means that rfds[] bit array is unmodified, bit of signal
pipe's read fd is still set, and the above check "works": it thinks select()
says there is data to read.
This accident does not work for poll(): .revents stays clear, and we do not
try reading signal pipe as we should. In udhcpd, we fall through and block
in socket read. Further SIGTERM signals simply cause socket read to be
interrupted and then restarted (since SIGTERM handler has SA_RESTART=1).
Fixing this as follows: remove the check altogether. Set signal pipe read fd
to nonblocking mode. Always read it in udhcp_sp_read().
If read fails, assume it's EAGAIN and return 0 ("no signal seen").
udhcpd avoids reading signal pipe on every recvd packet by looping if EINTR
(using safe_poll()) - thus ensuring we have correct .revents for all fds -
and calling udhcp_sp_read() only if pfds[0].revents!=0.
udhcpc performs much fewer reads (typically it sleeps >99.999% of the time),
there is no need to optimize it: can call udhcp_sp_read() after each poll
unconditionally.
To robustify socket reads, unconditionally set pfds[1].revents=0
in udhcp_sp_fd_set() (which is before poll), and check it before reading
network socket in udhcpd.
TODO:
This might still fail: if pfds[1].revents=POLLIN, socket read may still block.
There are rare cases when select/poll indicates that data can be read,
but then actual read still blocks (one such case is UDP packets with
wrong checksum). General advise is, if you use a poll/select loop,
keep all your fds nonblocking.
Maybe we should also do that to our network sockets?
function old new delta
udhcp_sp_setup 55 65 +10
udhcp_sp_fd_set 54 60 +6
udhcp_sp_read 46 36 -10
udhcpd_main 1451 1437 -14
udhcpc_main 2723 2708 -15
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/3 up/down: 16/-39) Total: -23 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When fetching a https:// URL with HTTP proxy configured
(e.g. with environment variable http_proxy=http://your-proxy:3128)
busybox was making a https connection to the proxy.
This was because the protocol scheme for the target URL was used to determine whether to connect to the proxy over SSL or not.
When the proxy is in use, the decision on whether to connect to the proxy over https
should based on the proxy URL not on the target URL.
function old new delta
wget_main 2381 2387 +6
Signed-off-by: Peter Lloyd <l-busybox@pgl22.co.uk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Attaching an interface to a VRF is done by setting the interface's
master. Besides VRF, this can also be used for bridges.
function old new delta
set_master - 142 +142
do_iplink 1262 1357 +95
packed_usage 32546 32539 -7
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/1 up/down: 237/-7) Total: 230 bytes
Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
VRF interfaces have a mandatory table parameter, which needs to be
specified using a RTNL attribute.
function old new delta
do_add_or_delete 1150 1254 +104
packed_usage 32444 32546 +102
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 206/0) Total: 206 bytes
Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This way, we can zero them all in one go.
We do malloc() anyway, thus nothing is lost by mallocing "globals"
function old new delta
arping_main 1683 1686 +3
finish 100 86 -14
catcher 350 310 -40
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/2 up/down: 3/-54) Total: -51 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
ARPING 192.168.1.1 from 192.168.1.172 wlan0
Unicast reply from 192.168.1.1 [F4:F2:6D:52:A8:DE] 1.672ms
Sent 1 probes (1 broadcast(s))
Received 1 response(s)
ARPING 192.168.1.1 from 192.168.1.172 wlan0
Unicast reply from 192.168.1.1 [f4:f2:6d:52:a8:de] 1.152ms
Sent 1 probe(s) (1 broadcast(s))
Received 1 response(s) (0 request(s), 0 broadcast(s))
function old new delta
finish 120 100 -20
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Do not clear extra bits on option_mask32, it's not necessary.
Move DAD bit to 2, this makes exit logic simpler.
function old new delta
arping_main 1655 1629 -26
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since bb_info_msg() was eliminated type of buffering on stdout is not important
function old new delta
udhcpd_main 1463 1451 -12
udhcpc_main 2735 2723 -12
setlinebuf 19 - -19
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 0/2 up/down: 0/-43) Total: -43 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The current standard (RFC 3542) is for IPV6_RECVPKTINFO to be given to
setsockopt, and IPV6_PKTINFO to be used as the packet type. Previously,
RFC 2292 required IPV6_PKTINFO to be used for both, but RFC 3542
re-purposed IPV6_PKTINFO when given to setsockopt. The special
Linux-specific IPV6_2292PKTINFO has the same semantics as IPV6_PKTINFO
in RFC 2292, but was introduced at the same time as IPV6_RECVPKTINFO.
Therefore, if we have IPV6_RECVPKTINFO available, we can use the RFC
3542 style, and if not, we assume that only the RFC 2292 API is
available, using IPV6_PKTINFO for both.
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bad case: send request to server1good.com; then try to resolve server2bad.com -
this fails, and failure takes ~5 secs; then receive server1's
response 5 seconds later. We'll never sync up in this case...
function old new delta
ntpd_main 1079 1106 +27
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
iproute.c: In function 'print_route':
iproute.c:85:9: error: 'RTA_TABLE' undeclared (first use in this function)
iproute.c:85:9: note: each undeclared identifier is reported only once for each function it appears in
iproute.c: In function 'iproute_modify':
iproute.c:467:36: error: 'RTA_TABLE' undeclared (first use in this function)
Fix it by partially #ifdef'ing the code added in b42107f215
Signed-off-by: Eugene Rudoy <gene.devel@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
With new code, we request that target IP (server ID) must be directly reachable.
If it's not, this happens:
udhcpc: waiting 2000 seconds
udhcpc: entering listen mode: kernel
udhcpc: opening listen socket on *:68 wlan0
udhcpc: entering renew state
udhcpc: sending renew to 1.1.1.1
udhcpc: send: Network is unreachable
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1.1.1.1 needs routing, this is fishy!
udhcpc: entering rebinding state
udhcpc: entering listen mode: raw
udhcpc: created raw socket
udhcpc: sending renew to 0.0.0.0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ going to use broadcast
which is the desired behavior. Before the patch, packet to 1.1.1.1 was routed
over eth0 (!) and maybe even into Internet (!!!).
function old new delta
udhcpc_main 2752 2763 +11
udhcp_send_kernel_packet 295 301 +6
send_renew 82 84 +2
send_packet 166 168 +2
bcast_or_ucast 23 25 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/0 up/down: 23/0) Total: 23 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
I see random field values like sll_hatype=0x267 when I strace.
They seem to not matter, but just in case they sometimes do,
let's at least have deterministic values (via memset(0)).
function old new delta
change_listen_mode 308 322 +14
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
FEATURE_GETOPT_LONG made dependent on LONG_OPTS.
The folloving options are removed, now LONG_OPTS enables long options
for affected applets:
FEATURE_ENV_LONG_OPTIONS FEATURE_EXPAND_LONG_OPTIONS
FEATURE_UNEXPAND_LONG_OPTIONS FEATURE_MKDIR_LONG_OPTIONS
FEATURE_MV_LONG_OPTIONS FEATURE_RMDIR_LONG_OPTIONS
FEATURE_ADDGROUP_LONG_OPTIONS FEATURE_ADDUSER_LONG_OPTIONS
FEATURE_HWCLOCK_LONG_OPTIONS FEATURE_NSENTER_LONG_OPTS
FEATURE_CHCON_LONG_OPTIONS FEATURE_RUNCON_LONG_OPTIONS
They either had a small number of long options, or their long options are
essential.
Example: upstream addgroup and adduser have ONLY longopts,
we should probably go further and get rid
of non-standard short options.
To this end, make addgroup and adduser "select LONG_OPTS".
We had this breakage caused by us even in our own package!
#if ENABLE_LONG_OPTS || !ENABLE_ADDGROUP
/* We try to use --gid, not -g, because "standard" addgroup
* has no short option -g, it has only long --gid.
*/
argv[1] = (char*)"--gid";
#else
/* Breaks if system in fact does NOT use busybox addgroup */
argv[1] = (char*)"-g";
#endif
xargs: its lone longopt no longer depends on DESKTOP, only on LONG_OPTS.
hwclock TODO: get rid of incompatible -t, -l aliases to --systz, --localtime
Shorten help texts by omitting long option when short opt alternative exists.
Reduction of size comes from the fact that store of an immediate
(an address of longopts) to a fixed address (global variable)
is a longer insn than pushing that immediate or passing it in a register.
This effect is CPU-agnostic.
function old new delta
getopt32 1350 22 -1328
vgetopt32 - 1318 +1318
getopt32long - 24 +24
tftpd_main 562 567 +5
scan_recursive 376 380 +4
collect_cpu 545 546 +1
date_main 1096 1095 -1
hostname_main 262 259 -3
uname_main 259 255 -4
setpriv_main 362 358 -4
rmdir_main 191 187 -4
mv_main 562 558 -4
ipcalc_main 548 544 -4
ifenslave_main 641 637 -4
gzip_main 192 188 -4
gunzip_main 77 73 -4
fsfreeze_main 81 77 -4
flock_main 318 314 -4
deluser_main 337 333 -4
cp_main 374 370 -4
chown_main 175 171 -4
applet_long_options 4 - -4
xargs_main 894 889 -5
wget_main 2540 2535 -5
udhcpc_main 2767 2762 -5
touch_main 436 431 -5
tar_main 1014 1009 -5
start_stop_daemon_main 1033 1028 -5
sed_main 682 677 -5
script_main 1082 1077 -5
run_parts_main 330 325 -5
rtcwake_main 459 454 -5
od_main 2169 2164 -5
nl_main 201 196 -5
modprobe_main 773 768 -5
mkdir_main 160 155 -5
ls_main 568 563 -5
install_main 773 768 -5
hwclock_main 411 406 -5
getopt_main 622 617 -5
fstrim_main 256 251 -5
env_main 198 193 -5
dumpleases_main 635 630 -5
dpkg_main 3991 3986 -5
diff_main 1355 1350 -5
cryptpw_main 233 228 -5
cpio_main 593 588 -5
conspy_main 1135 1130 -5
chpasswd_main 313 308 -5
adduser_main 887 882 -5
addgroup_main 416 411 -5
ftpgetput_main 351 345 -6
get_terminal_width_height 242 234 -8
expand_main 690 680 -10
static.expand_longopts 18 - -18
static.unexpand_longopts 27 - -27
mkdir_longopts 28 - -28
env_longopts 30 - -30
static.ifenslave_longopts 34 - -34
mv_longopts 46 - -46
static.rmdir_longopts 48 - -48
packed_usage 31739 31687 -52
------------------------------------------------------------------------------
(add/remove: 2/8 grow/shrink: 3/49 up/down: 1352/-1840) Total: -488 bytes
text data bss dec hex filename
915681 485 6880 923046 e15a6 busybox_old
915428 485 6876 922789 e14a5 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Move first two messages to log2 level:
08:46:32.23824 udhcpc: opening raw socket on ifindex 2
08:46:32.23825 udhcpc: got raw socket fd
08:46:32.26354 udhcpc: created raw socket
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Basedon patch by Bernd Holzmüller <bernd.holzmueller@tiggerswelt.net>
function old new delta
option_to_env 504 580 +76
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This patch adds filtering by and printing of 'scope' to the
ip route command, taken from the upstream ip command.
x86_64:
function old new delta
iproute_list_or_flush 1548 1674 +126
print_route 2394 2469 +75
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 201/0) Total: 201 bytes
mipsel:
iproute_list_or_flush 1952 2096 +144
print_route 2580 2696 +116
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 2/0 up/down: 260/0) Total: 260 bytes
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Patch is based on work by tiggerswelt.net. They say:
"
We wanted udhcpc6 to release its IPv6-Addresses on
quit (-R-commandline-option) which turned out to generate once again
kind of garbage on the network-link.
We tracked this down to two issues:
- udhcpc6 uses a variable called "srv6_buf" to send packets to
the dhcp6-server, but this variable is never initialized correctly
and contained kind of a garbage-address
- The address of the dhcp6-server is usually a link-local-address,
that requires an interface-index when using connect() on an AF_INET6-
socket
We added an
additional parameter for ifindex to d6_send_kernel_packet() and made
d6_recv_raw_packet() to capture the address of the dhcp6-server and
forward it to its callee.
"
Three last patches together:
function old new delta
d6_read_interface - 454 +454
d6_recv_raw_packet - 283 +283
option_to_env 249 504 +255
.rodata 165226 165371 +145
send_d6_discover 195 237 +42
send_d6_select 118 159 +41
send_d6_renew 173 186 +13
send_d6_release 162 173 +11
opt_req - 10 +10
d6_send_kernel_packet 304 312 +8
opt_fqdn_req - 6 +6
d6_mcast_from_client_config_ifindex 48 51 +3
d6_find_option 63 61 -2
udhcpc6_main 2416 2411 -5
static.d6_recv_raw_packet 266 - -266
------------------------------------------------------------------------------
(add/remove: 5/1 grow/shrink: 8/2 up/down: 1271/-273) Total: 998 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Patch is based on work by tiggerswelt.net. They say:
"
But when we tried to use dnsmasq on server-side, udhcpc6 was unable to
forward the acquired address to its setup-script although the
IPv6-Address had been assigned by the server as we could see via
tcpdump. We traced this issue down to a problem on how udhcpc6 parses
DHCPv6-Options: When moving to next option, a pointer-address is
increased and a length buffer is decreased by the length of the option.
The problem is that it is done in this order:
option += 4 + option[3];
len_m4 -= 4 + option[3];
But this has to be switched as the length is decreased by the length of
the *next* option, not the current one. This affected both - internal
checks if a required option is present and the function to expose
options to the environment of the setup-script.
There was also a bug parsing D6_OPT_STATUS_CODE Options, that made
dnsmasq not work as udhcpc6 thought it is receiving a non-positive
status-code (because it did not parse the status-code as required in RFC
3315).
In addition we introduced basic support for RFC 3646 (OPTION_DNS_SERVERS
and OPTION_DOMAIN_LIST) and RFC 4704 (OPTION_CLIENT_FQDN).
"
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Patch is based on work by tiggerswelt.net. They say:
"Using this patch it was no problem to acquire an IPv6-Address via DHCPv6
using ISC DHCPD6 on server-side."
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
We were strdup'ing "Cookie: foo" every time we saw it.
function old new delta
handle_incoming_and_exit 2733 2821 +88
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Anonymous ftpd login is useful even when ftpd authentication feature
is enabled. Anonymous logins provide simple password-less connection
for FTP clients.
To allow password-less connection user command line option '-a USER' is
added. This option specifies the system user to use when
'anonymous' username is given in USER command. No password is required
in this case.
function old new delta
ftpd_main 2164 2232 +68
packed_usage 31015 31046 +31
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 99/0) Total: 99 bytes
Signed-off-by: Andrey Mozzhuhin <amozzhuhin@yandex.ru>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Good news that TLS_RSA_WITH_AES_256_CBC_SHA256 still works with new code ;)
This change adds inevitable extension to have different sized hashes and AES key sizes.
In libbb, md5_end() and shaX_end() are extended to return result size instead of void -
this helps *a lot* in tls (the cost is ~5 bytes per _end() function).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Hoped this can make cdn.kernel.org to like us more. Nope.
While at it, made error reporting more useful.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
A new applet, ssl_client, is the TLS debug thing now.
It doubles as wget's NOMMU helper.
In MMU mode, wget still forks, but then directly calls TLS code,
without execing.
This can also be applied to sendmail/popmail (SMTPS / SMTP+starttls support)
and nc --ssl (ncat, nmap's nc clone, has such option).
function old new delta
tls_handshake - 1691 +1691
tls_run_copy_loop - 443 +443
ssl_client_main - 128 +128
packed_usage 30978 31007 +29
wget_main 2508 2535 +27
applet_names 2553 2560 +7
...
xwrite_encrypted 360 342 -18
tls_main 2127 - -2127
------------------------------------------------------------------------------
(add/remove: 4/1 grow/shrink: 13/8 up/down: 2351/-2195) Total: 156 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Was:
Usage: ip [OPTIONS] address|route|link|tunnel|neigh|rule [COMMAND]
ip [OPTIONS] OBJECT [COMMAND]
where OBJECT := address|route|link|tunnel|neigh|rule
OPTIONS := -f[amily] inet|inet6|link | -o[neline]
User: instead of repeating list of OBJECTs twice, you could at least
show available COMMANDs...
Now:
Usage: ip [OPTIONS] address|route|link|tunnel|neigh|rule [COMMAND]
OPTIONS := -f[amily] inet|inet6|link | -o[neline]
COMMAND :=
ip addr add|del IFADDR dev IFACE | show|flush [dev IFACE] [to PREFIX]
ip route list|flush|add|del|change|append|replace|test ROUTE
ip link set IFACE [up|down] [arp on|off] | show [IFACE]
ip tunnel add|change|del|show [NAME]
[mode ipip|gre|sit]
[remote ADDR] [local ADDR] [ttl TTL]
ip neigh show|flush [to PREFIX] [dev DEV] [nud STATE]
ip rule [list] | add|del SELECTOR ACTION
While at it, tweak tc --help too (it stays disabled, thus no effect)
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
As it turns out, it goes only up to "inbuf_size:4608"
for kernel.org - fixed 18kb buffer was x4 larger than necessary.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
With tls_has_buffered_record(), entire kernel.org response
is printed at once, without 6 second pause to see its delayed EOF.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
For the first time
printf "GET / HTTP/1.1\r\nHost: kernel.org\r\n\r\n" | ./busybox tls kernel.org
successfully reads entire server response and TLS shutdown.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This is particularly useful if hostname resolution is triggered by
host non-reachability: I saw this in real-life, without the message
it is not at all obvious that IP that we use for a specific host
has changed.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Successfully finishes handshake with test servers using NULL-SHA256
cipher.
The "only" thing remaining before there is a chance
this can actually work with real servers is AES encrypt/decrypt.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
$ ./busybox tls kernel.org
insize:0 tail:0
got block len:74
got HANDSHAKE
got SERVER_HELLO
insize:79 tail:4406
got block len:4392
got HANDSHAKE
got CERTIFICATE
entered der @0x8f7e723:0x30 len:1452 inner_byte @0x8f7e727:0x30
entered der @0x8f7e727:0x30 len:1172 inner_byte @0x8f7e72b:0xa0
skipped der 0xa0, next byte 0x02
skipped der 0x02, next byte 0x30
skipped der 0x30, next byte 0x30
skipped der 0x30, next byte 0x30
skipped der 0x30, next byte 0x30
skipped der 0x30, next byte 0x30
entered der @0x8f7e830:0x30 len:418 inner_byte @0x8f7e834:0x30
skipped der 0x30, next byte 0x03
entered der @0x8f7e843:0x03 len:399 inner_byte @0x8f7e847:0x00
copying key bytes:399, first:0x00
insize:4397 tail:9
got block len:4
got SERVER_HELLO_DONE
Now need to teach it to send ClientKeyExchange...
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
write(3, "GET / HTTP/1.1\r\nUser-Agent: Wget\r\nConnection: close\r\n\r\n", 74) = 74
shutdown(3, SHUT_WR) = 0
alarm(900) = 900
read(3, "", 1024) = 0
write(2, "wget: error getting response\n", 29) = 29
exit(1)
The peer simply does not return anything. It closes its connection.
Probably it detects wget closing its writing end: shutdown(3, SHUT_WR).
The point it, closing write side of the socket is _valid_ for HTTP.
wget sent the full request, it won't be sending anything more:
it will only receive the response, and that's it.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Redundant help texts (one which only repeats the description)
are deleted.
Descriptions and help texts are trimmed.
Some config options are moved, even across menus.
No config option _names_ are changed.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When httpd proxies a request to another server, it first creates
an AF_INET socket, then resolves the server name to a sockaddr,
then connects to it. This fails if the server name resolves to
an IPv6 address.
This patch ensures that the socket is created with the correct
address family (AF_INET6 if the server resolves to an IPv6 address
and AF_INET otherwise).
Signed-off-by: Laurent Bercot <ska-dietlibc@skarnet.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Run the namelookup from the main loop so a misspelled first ntp server
name does not block everything forever.
This fixes the following situation which would block forever:
$ sudo ./busybox ntpd -dn -p foobar -p pool.ntp.org
ntpd: bad address 'foobar'
ntpd: bad address 'foobar'
ntpd: bad address 'foobar'
...
New behavior:
ntpd: bad address 'foobar'
ntpd: sending query to 137.190.2.4
ntpd: reply from 137.190.2.4: offset:-1.009775 delay:0.175550 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x01
ntpd: sending query to 137.190.2.4
ntpd: reply from 137.190.2.4: offset:-1.009605 delay:0.175461 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x03
ntpd: sending query to 137.190.2.4
ntpd: reply from 137.190.2.4: offset:-1.005327 delay:0.167027 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x07
ntpd: sending query to 137.190.2.4
ntpd: bad address 'foobar'
ntpd: reply from 137.190.2.4: offset:-1.046349 delay:0.248705 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x0f
This patch is based on Kaarle Ritvanens work.
http://lists.busybox.net/pipermail/busybox/2016-May/084197.html
function old new delta
ntpd_main 1061 1079 +18
ntp_init 556 560 +4
resolve_peer_hostname 81 75 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 22/-6) Total: 16 bytes
Signed-off-by: Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
All other applets are listed simply by their name, no reason why
dumpleases doesn't do that.
Group all udhcpd feature options directly after it.
Put "NOT READY" into udhcpc6 item (some users actually tried to use it,
and complained).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit a8c696bf09 makes ifup and ifdown
individually selectable, but forgets to update the dependency to
IFUPDOWN_UDHCPC_CMD_OPTIONS, so it is not selectable anymore.
This patch fixes the dependency by checking for IFUP or IFDOWN, instead
of the obsolete IFUPDOWN.
Also, it drops dependency on UDHCPC: udhcpc on the target system
does not have to come from the _same_ binary.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
musl does not like including linux/netfilter_ipv4.h
(enum / #define collision in two headers, resulting in "3 = 3"
type situation in enum definition).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
They merely enable ip or ifconfig/route. There is already a way to do this
on the same menuconfig page.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Linux kernel, starting from 2.6.19 allows ip table ids to have 32-bit values.
In order to preserve compatibility, the old 8-bit field: rtm_table is still
in use when table id is lower than 256.
Add support for the 32-bit table id (RTA_TABLE attribute) in:
- ip route print
- ip route modify
- ip rule print
- ip rule modify
Add printing of table ids to ip route.
Changes are compatible with the mainline iproute2 utilities.
These changes are required for compatibility with ConnMan, which by default
uses table ids greater than 255.
function old new delta
print_route 1588 1637 +49
do_iproute 2187 2222 +35
do_iprule 955 987 +32
print_rule 617 630 +13
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/0 up/down: 129/0) Total: 129 bytes
Signed-off-by: Lukasz Nowak <lnowak@tycoint.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
While at it, fix a pathological case where it is not fine:
-r REALM with some 8-kbyte long REALM would overflow the buffer.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
function old new delta
udhcp_get_option 215 220 +5
udhcp_run_script 802 803 +1
Signed-off-by: Brian Foley <bpfoley@google.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
