function old new delta
mount_main 1221 1241 +20
packed_usage 30616 30610 -6
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Isaac Dunham <ibid.ag@gmail.com>
Without this patch acpid can't log the events at all. Moreover it tries
to truncate log file every time.
Signed-off-by: Serj Kalichev <serj.kalichev@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
1) real swapon/swapoff handles also devices on the commandline with -a;
2) xstat(device) in swap_enable_disable aborts on error when cycling through
fstab so some devices are not handled;
3) duplicated code for ENABLE_FEATURE_SWAPON_DISCARD and
ENABLE_FEATURE_SWAPON_PRI was moved to functions.
4) silence some error messages with -a;
5) minor cleanups and code refactoring reduced the size as per bloat-check:
6) I also added support for /proc/swaps handling to swapoff:
"When the -a flag is given, swapping is disabled on all known swap devices
and files (as found in /proc/swaps or /etc/fstab)."
So now swapoff first cycles through /proc/swaps and then through fstab
to swapoff all devices.
function old new delta
set_discard_flag - 106 +106
swap_enable_disable 147 238 +91
set_priority_flag - 79 +79
retrieve_file_data 470 467 -3
swap_on_off_main 638 418 -220
------------------------------------------------------------------------------
(add/remove: 2/0 grow/shrink: 1/2 up/down: 276/-223) Total: 53 bytes
Signed-off-by: Tito Ragusa <farmatito@tiscali.it>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Swap entries in /etc/fstab inherit the priority specified on the command line unless they have 'pri' in their mount options.
Signed-off-by: Matt Whitlock <busybox@mattwhitlock.name>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Also, the maximum allowable value of swap priority is technically SWAP_FLAG_PRIO_MASK >> SWAP_FLAG_PRIO_SHIFT.
Signed-off-by: Matt Whitlock <busybox@mattwhitlock.name>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
rand() is the most standard C library function,
and on uclibc they are the same. I guess
they are the same in most todays' libc...
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Also, use the name of the block device we found, not necessarily the one
we got from the user:
fstrim -v /
/dev/sdj: 4711 bytes were trimmed
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
fstrim applet is a port from util-linux.
"Trimming" your NAND/eMMC storage will restore the write performance
back to normal after having slow down issues on sequential write and
random write due to usage over time.
Good reading on subject:
http://forum.xda-developers.com/showthread.php?t=1971852
(with long options and CLEAN_UP turned on)
function old new delta
.rodata 148494 148791 +297
fstrim_main - 283 +283
fstrim_sfx - 128 +128
packed_usage 28826 28903 +77
applet_main 2760 2768 +8
applet_names 2343 2350 +7
applet_nameofs 690 692 +2
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 5/0 up/down: 802/0) Total: 802 bytes
Signed-off-by: Malek Degachi <malek-degachi@laposte.net>
Cc: Eugene San (eugenesan) <eugenesan@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Config instructions for util-linux/volume_id are moved into the
source files according to the new config feature.
No code change.
Signed-off-by: Sven-Göran Bergh <sgb@systemasis.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Kbuild instructions for util-linux/volume_id are moved into the
source files according to the new build feature.
No code change.
Signed-off-by: Sven-Göran Bergh <sgb@systemasis.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
"losetup -d" was not complaining that LOOPDEV is missing.
"losetup -a" was listing only up to /dev/loop9.
"losetup -f" looped forever if llop0 was taken, and never tried
anything after /dev/loop9.
"-o" with other options (say, -r) had no effect.
function old new delta
losetup_main 376 419 +43
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
516530c932 uses $DEVNAME variable
for device node name. This is fine, but only works for hotplugging,
"mdev -s" will behave differently when DEVNAME and basename(path)
differ.
This patch extracts the DEVNAME from the uevent sysfs file in
make_device(), thus works for hot- and coldplugging; so using
the environment DEVNAME on hotplug events is no longer necessary.
Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
len is declared as uint32_t but le16_to_cpu macro is used
Signed-off-by: Oliver Metz <oliver.metz@gmx.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Added -a support. Also made sure -f works as follows:
losetup [-r] [-o offset] {-f|loopdev} file
Removed support for 'losetup -r' with no arguments.
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Sequential run of concurrent mdev's was too simplistic:
they waited for /dev/mdev.seq to match. This could sometimes
cause cumulative loss of time on the order of a second.
Added SIGCHLD signaling from exiting mdev to all other mdev's.
Added debugging required to see that code actually works as intended.
Example of /dev/mdev.log (with "woken up" elevated from dbg lvl 3 to 2):
mdev[1023]: first seq written
^^^^ seq, not pid
mdev[1023]: 35.022395 ACTION:add SUBSYSTEM:module DEVNAME:(null) DEVPATH:/module/lib80211
mdev[1023]: rule matched, line -1
^^^^^^^ means "default rule"
mdev[1023]: 35.022676 exiting
^^^^^^^^^ second,usec timestamp
mdev[1024]: 35.069691 ACTION:add SUBSYSTEM:vc DEVNAME:vcs9 DEVPATH:/devices/virtual/vc/vcs9
mdev[1024]: dev 7,9
mdev[1025]: 35.069889 waiting for '1024'
mdev[1026]: 35.069946 waiting for '1024'
mdev[1027]: 35.070151 waiting for '1024'
mdev[1024]: rule matched, line -1
mdev[1024]: mknod vcs9 (7,9) 20660 0:0
mdev[1024]: 35.070346 exiting
mdev[1025]: woken up
mdev[1026]: woken up
mdev[1025]: 35.071213 ACTION:add SUBSYSTEM:vc DEVNAME:vcsa9 DEVPATH:/devices/virtual/vc/vcsa9
^^^^^^^^^ took only a millisecond to start running after prev mdev exited
mdev[1025]: dev 7,137
mdev[1027]: woken up
mdev[1025]: rule matched, line -1
mdev[1025]: mknod vcsa9 (7,137) 20660 0:0
mdev[1025]: 35.072109 exiting
function old new delta
mdev_main 849 1372 +523
curtime - 59 +59
dirAction 87 134 +47
static.ts - 8 +8
keywords 19 12 -7
make_device 2189 2119 -70
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
