$ ./busybox tls kernel.org
insize:0 tail:0
got block len:74
got HANDSHAKE
got SERVER_HELLO
insize:79 tail:4406
got block len:4392
got HANDSHAKE
got CERTIFICATE
entered der @0x8f7e723:0x30 len:1452 inner_byte @0x8f7e727:0x30
entered der @0x8f7e727:0x30 len:1172 inner_byte @0x8f7e72b:0xa0
skipped der 0xa0, next byte 0x02
skipped der 0x02, next byte 0x30
skipped der 0x30, next byte 0x30
skipped der 0x30, next byte 0x30
skipped der 0x30, next byte 0x30
skipped der 0x30, next byte 0x30
entered der @0x8f7e830:0x30 len:418 inner_byte @0x8f7e834:0x30
skipped der 0x30, next byte 0x03
entered der @0x8f7e843:0x03 len:399 inner_byte @0x8f7e847:0x00
copying key bytes:399, first:0x00
insize:4397 tail:9
got block len:4
got SERVER_HELLO_DONE
Now need to teach it to send ClientKeyExchange...
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
write(3, "GET / HTTP/1.1\r\nUser-Agent: Wget\r\nConnection: close\r\n\r\n", 74) = 74
shutdown(3, SHUT_WR) = 0
alarm(900) = 900
read(3, "", 1024) = 0
write(2, "wget: error getting response\n", 29) = 29
exit(1)
The peer simply does not return anything. It closes its connection.
Probably it detects wget closing its writing end: shutdown(3, SHUT_WR).
The point it, closing write side of the socket is _valid_ for HTTP.
wget sent the full request, it won't be sending anything more:
it will only receive the response, and that's it.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Redundant help texts (one which only repeats the description)
are deleted.
Descriptions and help texts are trimmed.
Some config options are moved, even across menus.
No config option _names_ are changed.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When httpd proxies a request to another server, it first creates
an AF_INET socket, then resolves the server name to a sockaddr,
then connects to it. This fails if the server name resolves to
an IPv6 address.
This patch ensures that the socket is created with the correct
address family (AF_INET6 if the server resolves to an IPv6 address
and AF_INET otherwise).
Signed-off-by: Laurent Bercot <ska-dietlibc@skarnet.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Run the namelookup from the main loop so a misspelled first ntp server
name does not block everything forever.
This fixes the following situation which would block forever:
$ sudo ./busybox ntpd -dn -p foobar -p pool.ntp.org
ntpd: bad address 'foobar'
ntpd: bad address 'foobar'
ntpd: bad address 'foobar'
...
New behavior:
ntpd: bad address 'foobar'
ntpd: sending query to 137.190.2.4
ntpd: reply from 137.190.2.4: offset:-1.009775 delay:0.175550 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x01
ntpd: sending query to 137.190.2.4
ntpd: reply from 137.190.2.4: offset:-1.009605 delay:0.175461 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x03
ntpd: sending query to 137.190.2.4
ntpd: reply from 137.190.2.4: offset:-1.005327 delay:0.167027 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x07
ntpd: sending query to 137.190.2.4
ntpd: bad address 'foobar'
ntpd: reply from 137.190.2.4: offset:-1.046349 delay:0.248705 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x0f
This patch is based on Kaarle Ritvanens work.
http://lists.busybox.net/pipermail/busybox/2016-May/084197.html
function old new delta
ntpd_main 1061 1079 +18
ntp_init 556 560 +4
resolve_peer_hostname 81 75 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 22/-6) Total: 16 bytes
Signed-off-by: Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
All other applets are listed simply by their name, no reason why
dumpleases doesn't do that.
Group all udhcpd feature options directly after it.
Put "NOT READY" into udhcpc6 item (some users actually tried to use it,
and complained).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit a8c696bf09 makes ifup and ifdown
individually selectable, but forgets to update the dependency to
IFUPDOWN_UDHCPC_CMD_OPTIONS, so it is not selectable anymore.
This patch fixes the dependency by checking for IFUP or IFDOWN, instead
of the obsolete IFUPDOWN.
Also, it drops dependency on UDHCPC: udhcpc on the target system
does not have to come from the _same_ binary.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
musl does not like including linux/netfilter_ipv4.h
(enum / #define collision in two headers, resulting in "3 = 3"
type situation in enum definition).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
They merely enable ip or ifconfig/route. There is already a way to do this
on the same menuconfig page.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Linux kernel, starting from 2.6.19 allows ip table ids to have 32-bit values.
In order to preserve compatibility, the old 8-bit field: rtm_table is still
in use when table id is lower than 256.
Add support for the 32-bit table id (RTA_TABLE attribute) in:
- ip route print
- ip route modify
- ip rule print
- ip rule modify
Add printing of table ids to ip route.
Changes are compatible with the mainline iproute2 utilities.
These changes are required for compatibility with ConnMan, which by default
uses table ids greater than 255.
function old new delta
print_route 1588 1637 +49
do_iproute 2187 2222 +35
do_iprule 955 987 +32
print_rule 617 630 +13
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/0 up/down: 129/0) Total: 129 bytes
Signed-off-by: Lukasz Nowak <lnowak@tycoint.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
While at it, fix a pathological case where it is not fine:
-r REALM with some 8-kbyte long REALM would overflow the buffer.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
function old new delta
udhcp_get_option 215 220 +5
udhcp_run_script 802 803 +1
Signed-off-by: Brian Foley <bpfoley@google.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Here, not handling the error is would just eat one input 0xff char.
Correct handling would need even more corner case handling,
as-is buggy handling corrupts the buffer.
Since we just been told by kernel that pty is ready,
EAGAIN should not be happening here anyway.
function old new delta
telnetd_main 1798 1785 -13
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
put_iac2(w,c) is mostly used with constants, fold them into one arg
function old new delta
put_iac2_merged - 46 +46
telnet_main 1603 1583 -20
con_escape 285 257 -28
put_iac2 50 - -50
------------------------------------------------------------------------------
(add/remove: 1/1 grow/shrink: 0/2 up/down: 46/-98) Total: -52 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
A bit of future-proofing. Some of them can stand just being ignored.
function old new delta
telnetd_main 1791 1798 +7
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
I managed to reproduce the bug, with some difficulty.
function old new delta
telnetd_main 1780 1791 +11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If a write to pty is short, remove_iacs() can be run on a buffer repeatedly.
This, for example, can eat 0xff chars (IACs, in telnet terms).
Rework the logic to handle IACs in a special "write to pty" function.
function old new delta
telnetd_main 1662 1750 +88
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
By user's request.
Decided to not use fcntl(F_SETLKW) in lieu of problems with locking
on networked filesystems. The existence of /var/run/ifstate.new
is treated as a write lock. rename() provides atomicity.
function old new delta
ifupdown_main 1019 1122 +103
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Also, much improved help text.
function old new delta
packed_usage 30652 30851 +199
tcpudpsvd_main 1782 1784 +2
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Added NOINLINE to two function, since my version of gcc would actualy increase
code size otherwise.
I see no size changes.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Remove FEATURE_TRACEROUTE_SOURCE_ROUTE: it's off by default, and
source routing is not used in real world.
Tested that "traceroute -n ::1 100" and "traceroute -n 127.0.0.1 100"
both send 100 byte IP packets (this matches what traceroute on Fedora
Rawhide is doing).
function old new delta
common_traceroute_main 3731 3738 +7
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
User report:
or our board we setup eth0:0 on a 10.10.10.x/29 netwrok.
The problem is ip addr flush dev eth0:0 removes all ip addresses from
eth0. You can see this if you run
ip -stat -stat addr flush dev eth0:0
2: eth0 inet 172.27.105.10/22 brd 172.27.107.255 scope global eth0
valid_lft forever preferred_lft forever
2: eth0 inet 10.10.10.9/29 scope global eth0:0
valid_lft forever preferred_lft forever
2: eth0 inet6 fe80::a2f6:fdff:fe18:2b13/64 scope link
valid_lft forever preferred_lft forever
*** Round 1, deleting 3 addresses ***
*** Flush is complete after 1 round ***
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
A padding to align a message should not only be added between
different attributes of a netlink message, but also at the end of the
message to pad it to the correct size.
Without this patch the following command does not work and returns an
error code:
ip link add type nlmon
Without this ip from busybox sends this:
sendmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000},
msg_namelen=12, msg_iov=[{iov_base={{len=45, ...},
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\20\0\22\0\t\0\1nlmon"}, iov_len=45}],
msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 45
return value: 2
The normal ip utile from iproute2 sends this:
sendmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000},
msg_namelen=12, msg_iov=[{iov_base={{len=48, ...},
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\20\0\22\0\t\0\1nlmon\0\0\0"}, iov_len=48}],
msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 48
return value: 0
With this patch ip from busybox sends this:
sendmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000},
msg_namelen=12, msg_iov=[{iov_base={{len=48, ...},
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\20\0\22\0\t\0\1nlmon\0\0\0"}, iov_len=48}],
msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 48
return value: 0
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The udhcpc script may be used to setup fallback configuration (E.G. IPv4LL,
fixed IP address, ..) that also needs to be cleaned up on release (E.G.
when SIGUSR2 is called or on shutdown with -R), so unconditionally call
deconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some user managed to hit a race where iface is gone between SIOCGIFFLAGS
and SIOCSIFFLAGS (!). If SIOCSIFFLAGS fails, treat it the same as failed
SIOCGIFFLAGS
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The busybox NTP implementation doesn't check the NTP mode of packets
received on the server port and responds to any packet with the right
size. This includes responses from another NTP server. An attacker can
send a packet with a spoofed source address in order to create an
infinite loop of responses between two busybox NTP servers. Adding
more packets to the loop increases the traffic between the servers
until one of them has a fully loaded CPU and/or network.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This is necessary for multi-hosted TLSed web sites.
function old new delta
spawn_https_helper_openssl 334 441 +107
Based on a patch by Jeremy Chadwick <jdc@koitsu.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It was doing way too simplistic work of just querying the server,
no redirects, no query massaging. This required user to know a lot about whois,
and enter at least three queries for each host to get meaningful information.
function old new delta
whois_main 209 646 +437
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The bug was seen when the following is done:
# killall 1 udhpc; killall 2 udhpc
Performing a DHCP renew
state: 2 -> 5
Sending renew...
Entering released state
state: 5 -> 6 <<<<<<<<<<<<<< not calling script!!!!
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This resolves the following use case problem:
"I start ntpd by default from /etc/init.d
There might be no working network connection (not configured properly for
whatever reason, hardware problems, whatelse).
With busybox 1.25 ntpd seems to loop forever if now NTP servers are found,
blocking the boot process and I never get a login to solve a possible pb or
to do a first time configuration."
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The ICMP RFC says that identifier and sequence number may be zero.
Having them zero for a Echo message, along with a data of zero's
as well will result in a Echo reply message with only zero's.
Some NAT implementations seem to get the checksum wrong on these
packages. Setting a checksum of 0x0 instead of 0xffff.
Through NAT:
Internet Control Message Protocol
Type: 0 (Echo (ping) reply)
Code: 0
Checksum: 0x0000 [incorrect, should be 0xffff]
Identifier (BE): 0 (0x0000)
Identifier (LE): 0 (0x0000)
Sequence number (BE): 0 (0x0000)
Sequence number (LE): 0 (0x0000)
Data (56 bytes)
Data: 000000000000000000000000000000000000000000000000...
[Length: 56]
Without NAT:
Internet Control Message Protocol
Type: 0 (Echo (ping) reply)
Code: 0
Checksum: 0xffff [correct]
Identifier (BE): 0 (0x0000)
Identifier (LE): 0 (0x0000)
Sequence number (BE): 0 (0x0000)
Sequence number (LE): 0 (0x0000)
[Request frame: 189]
[Response time: 0.024 ms]
Data (56 bytes)
Data: 000000000000000000000000000000000000000000000000...
[Length: 56]
And this in turn will make some hardware MAC checksum offloading
engines drop the packet.
(This was seen with a Synopsis MAC, the same one used in for instance the
stmmac Ethernet driver in the linux kernel.)
This change can be seen as a workaround for bugs in other layers.
But just setting an identifier for the Echo message packet will
avoid prodding the hornets nest.
function old new delta
common_ping_main 424 500 +76
Signed-off-by: Jonas Danielsson <jonasdn@axis.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some users start ntpd on boot, and don't babysit it. If it dies because
DNS is not yet up and therefore NTP servers can't be found, users are
not happy.
Example behavior with a peer name which can't be resolved:
ntpd: bad address 'qwe.rty.ghj.kl'
...5 sec...
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
...
Based on the patch by Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
function old new delta
resolve_peer_hostname - 81 +81
ntpd_main 1130 1061 -69
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/1 up/down: 81/-69) Total: 12 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This is the only non-debug use of ether_ntoa(). By not using it,
we reduce bss:
function old new delta
arping_main 1568 1665 +97
static.asc 18 - -18
ether_ntoa 57 - -57
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 1/0 up/down: 97/-75) Total: 22 bytes
text data bss dec hex filename
911020 493 7352 918865 e0551 busybox_old
911069 493 7336 918898 e0572 busybox_unstripped
Also, "standard" arping zero-pads MAC. ether_ntoa() does not.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Use designated initializers for struct msghdr.
The struct layout is non-portable and musl libc does not match what busybox expects.
Signed-off-by: Szabolcs Nagy <nsz@port70.net>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The result of looking at "grep -F -B2 '*fill*' busybox_unstripped.map"
text data bss dec hex filename
829901 4086 1904 835891 cc133 busybox_before
829665 4086 1904 835655 cc047 busybox
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Otherwise, "-t 0" usage may end up sending them forever
if server does not respond.
function old new delta
udhcpc_main 2846 2836 -10
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
RFC2131 paragraph 4.1 states DHCP messages broadcast by a client prior to
that client obtaining its IP address must have the source IP address
field in the header set to 0.
Request messages transmitted in renewing and rebinding state need to use
the obtained IP address as source IP address in the header; this behavior
lines up with other implementations like ISC dhcp client.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Let udhcpd retain the information about expired leases when restarting
so that the leases are reserved until they possibly become the oldest
expired lease.
This reduces the frequency of IP address changes for example when the
DHCP server and a group of clients, who do not store and request their
previously offered IP address across restarts, are collectively restarted
and the startup order of the clients are not guaranteed.
Signed-off-by: Christian Lindeberg <christian.lindeberg@axis.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This patch allow to have multiple interface definitions, much like
Debian's ifupdown. More specifically, it removes the check for a
duplicate definition, so the impact on binary size should be fairly
minimal.
This configuration:
iface eth0 inet static
address 192.168.0.15
netmask 255.255.0.0
gateway 192.168.0.1
iface eth0 inet static
address 10.0.0.1
netmask 255.255.255.0
Will add two addresses to eth0 if ip is used. If ifconfig is used,
the standards methods will likely not stack, but the administrator may
still use the manual method. The DHCP method may work depending on the
DHCP client in use.
This is a fairly advanced feature for power users who knows what they
are doing. There are not many other network configuration systems that
allows multiple addresses on an interface.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
After commit 8e74adab01
("libbb: make INET[6]_rresolve use sockaddr2{host,dotted}_noport")
INET_sprint6 uses more than just sin6_addr, it also tries to display the
scope id, which is uninitialized when called from ife_print6.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
