The somewhat new "unpack in memory" code was broken
for xmalloc_open_zipped_read_close() on NOMMU: we seek back
over signature, but then expect it to be already consumed.
Stop seeking back in this case.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
"modprobe minix; echo $?"
Was:
modprobe: corrupted data
modprobe: read error from 'kernel/fs/minix/minix.ko.xz': No such file or directory
modprobe: corrupted data
modprobe: read error from 'kernel/fs/minix/minix.ko.xz': No such file or directory
modprobe: corrupted data
modprobe: read error from 'kernel/fs/minix/minix.ko.xz'
modprobe: 'kernel/fs/minix/minix.ko.xz': Success
0
Now:
modprobe: corrupted data
modprobe: read error from 'kernel/fs/minix/minix.ko.xz'
1
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Both calls to run_applet_and_exit are followed by the same code
to print an error message and return status 127. Remove this
duplication and make run_applet_and_exit static.
function old new delta
run_applet_and_exit 675 667 -8
main 119 92 -27
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-35) Total: -35 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
A recent commit made it possible to disable BusyBox's --install
and --list options. However it also stopped "busybox <applet>
<params>" from working.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some users start ntpd on boot, and don't babysit it. If it dies because
DNS is not yet up and therefore NTP servers can't be found, users are
not happy.
Example behavior with a peer name which can't be resolved:
ntpd: bad address 'qwe.rty.ghj.kl'
...5 sec...
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
...
Based on the patch by Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
function old new delta
resolve_peer_hostname - 81 +81
ntpd_main 1130 1061 -69
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/1 up/down: 81/-69) Total: 12 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If it's disabled, code shrinks by about 900 bytes:
function old new delta
usr_bin 10 - -10
usr_sbin 11 - -11
install_dir 20 - -20
applet_install_loc 184 - -184
run_applet_and_exit 686 21 -665
------------------------------------------------------------------------------
(add/remove: 0/4 grow/shrink: 0/1 up/down: 0/-890) Total: -890 bytes
text data bss dec hex filename
911327 493 7336 919156 e0674 busybox_old
909848 493 7336 917677 e00ad busybox_unstripped
but busybox executable by itself does not say anything useful:
$ busybox
busybox: applet not found
Based on the patch by Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This is the only non-debug use of ether_ntoa(). By not using it,
we reduce bss:
function old new delta
arping_main 1568 1665 +97
static.asc 18 - -18
ether_ntoa 57 - -57
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 1/0 up/down: 97/-75) Total: 22 bytes
text data bss dec hex filename
911020 493 7352 918865 e0551 busybox_old
911069 493 7336 918898 e0572 busybox_unstripped
Also, "standard" arping zero-pads MAC. ether_ntoa() does not.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Use designated initializers for struct msghdr.
The struct layout is non-portable and musl libc does not match what busybox expects.
Signed-off-by: Szabolcs Nagy <nsz@port70.net>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The result of looking at "grep -F -B2 '*fill*' busybox_unstripped.map"
text data bss dec hex filename
829901 4086 1904 835891 cc133 busybox_before
829665 4086 1904 835655 cc047 busybox
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bash doesn't expand its $'...' construct in double quotes:
$ echo "$'a\tb'"
$'a\tb'
Change BusyBox ash to do the same. This also fixes a problem with
here documents where BusyBox ash gave an incorrect result for:
$ cat <<EOF
> '$'
> EOF
'$'
Reported-by: Timo Teras <timo.teras@iki.fi>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This makes "make menuconfig" also work on systems where ncurses is not
installed in a standard location (such as on NixOS).
This patch changes ccflags() so that it tries pkg-config first, and only
if pkg-config fails does it go back to the fallback/manual checks. This
is the same algorithm that ldflags() already uses.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The Makefiles call the respective interpreter explicitly, but this makes
it easier to use the scripts manually.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The current code does this:
if [ -f /usr/include/ncursesw/curses.h ]; then
echo '-I/usr/include/ncursesw -DCURSES_LOC="<ncursesw/curses.h>"'
elif [ -f /usr/include/ncurses/ncurses.h ]; then
echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses.h>"'
elif [ -f /usr/include/ncurses/curses.h ]; then
echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses/curses.h>"'
[...]
This is merely inconsistent:
- adding the full path to the directory in the -I directive,
- especially since that path is already a sub-path of the system
include path,
- and then repeating the sub-path in the #include directive.
Rationalise each include directive:
- only use the filename in the #include directive,
- keep the -I directives: they are always searched for before the
system include path; this ensures the correct header is used.
Using the -I directives and the filename-only in #include is more in
line with how pkg-config behaves, eg.:
$ pkg-config --cflags ncursesw
-I/usr/include/ncursesw
This paves the way for using pkg-config for CFLAGS, too, now we use it
to find the libraries.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
