Commit Graph

158 Commits

Author SHA1 Message Date
Denys Vlasenko
9b44deac01 ntpd: allow non-root to run it (e.g. with -w option)
This is safe: it's not a setuid applet, the attempt to set time
will simply fail if attempted by non-root

From openwrt 600-allow-ntpd-non-root.patch

function                                             old     new   delta
ntp_init                                            1049    1005     -44

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-12-15 23:23:44 +01:00
Denys Vlasenko
afb5d8b2db ntpd: fix the case where two replies received at once and first one causes a step
function                                             old     new   delta
recv_and_process_peer_pkt                           2476    2486     +10

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-09-29 14:19:17 +02:00
Ron Yorston
5c69ad0ecd build system: drop PLATFORM_LINUX
PLATFORM_LINUX is a hidden configuration option which is disabled by
default and enabled at over a hundred locations for features that are
deemed to be Linux specific.

The only effect of PLATFORM_LINUX is to control compilation of
libbb/match_fstype.c.  This file is only needed by mount and umount.

Remove all references to PLATFORM_LINUX and compile match_fstype.c
if mount or umount is enabled.

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-08-13 17:12:56 +02:00
Denys Vlasenko
9a2d899273 ntpd: fix refid reported in server mode, closes 13056
function                                             old     new   delta
resolve_peer_hostname                                129     196     +67
recv_and_process_peer_pkt                           2475    2476      +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 68/0)               Total: 68 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-07-20 00:04:33 +02:00
Denys Vlasenko
ea096d6c13 ntpd: decrease MIN_FREQHOLD by 2, increase "penalty" for largish offset x2
> 2018-07-25:
> ntpd: increase MIN_FREQHOLD by 3
> This means we'll start correcting frequency ~5 minutes after start,
> not ~3.5 ones.
> With previous settings I still often see largish ~0.7s initial offsets
> only about 1/2 corrected before frequency correction kicks in,
> resulting in ~200ppm "correction" which is then slowly undone.

Review of real-world results of the above shows that with small
initial offsets, freq correction can be allowed to kick in sooner,
whereas with large (~0.8s) offsets, we still start freq correction
a bit too soon.

Let's rebalance this a bit.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-30 12:18:07 +01:00
Denys Vlasenko
d6ff27de15 ntpd: abs(tmx.offset) was truncating a "long" typed value
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-25 17:35:58 +02:00
Denys Vlasenko
e5897d041d suppress a few "unused function" warnings
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-25 13:05:15 +02:00
Denys Vlasenko
b694608429 ntpd: add comment about mode6, no code changes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 15:03:47 +02:00
Denys Vlasenko
c0961e09b2 ntpd: commonalize message strings
function                                             old     new   delta
recv_and_process_peer_pkt                            961     973     +12
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 12/0)               Total: 12 bytes
   text	   data	    bss	    dec	    hex	filename
 953108	    481	   7288	 960877	  ea96d	busybox_old
 953086	    481	   7288	 960855	  ea957	busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 13:10:19 +02:00
James Byrne
6937487be7 libbb: reduce the overhead of single parameter bb_error_msg() calls
Back in 2007, commit 0c97c9d437 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().

This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.

Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.

This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.

The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):

Arm:     -92 bytes
MIPS:    -52 bytes
PPC:   -1836 bytes
x86_64: -938 bytes

Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 11:35:03 +02:00
Denys Vlasenko
caecfdc20d ntpd: abort if argvs are (unexpectedly) given
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 11:28:18 +02:00
James Byrne
253c4e787a Optionally re-introduce bb_info_msg()
Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was
eliminated and calls to it changed to be bb_error_msg(). The downside of
this is that daemons now log all messages to syslog at the LOG_ERR level
which makes it hard to filter errors from informational messages.

This change optionally re-introduces bb_info_msg(), controlled by a new
option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that
were removed (only in applets that set logmode to LOGMODE_SYSLOG or
LOGMODE_BOTH), and also changes informational messages in ifplugd and
ntpd.

The code size change of this is as follows (using 'defconfig' on x86_64
with gcc 7.3.0-27ubuntu1~18.04)

function                                             old     new   delta
bb_info_msg                                            -     182    +182
bb_vinfo_msg                                           -      27     +27
static.log7                                          194     198      +4
log8                                                 190     191      +1
log5                                                 190     191      +1
crondlog                                              45       -     -45
------------------------------------------------------------------------------
(add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45)           Total: 170 bytes

If you don't care about everything being logged at LOG_ERR level
then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller:

function                                             old     new   delta
static.log7                                          194     200      +6
log8                                                 190     193      +3
log5                                                 190     193      +3
syslog_level                                           1       -      -1
bb_verror_msg                                        583     581      -2
crondlog                                              45       -     -45
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48)            Total: -36 bytes

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-30 10:51:27 +02:00
Denys Vlasenko
da996c5d2a ntpd: do not create pid file if not backgrounded
function                                             old     new   delta
ntp_init                                             995    1021     +26
ntpd_main                                           1267    1257     -10
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 26/-10)             Total: 16 bytes

Reported by Alfonso Ranieri <alforan@tin.it>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-03-27 13:47:38 +01:00
Denys Vlasenko
5059653882 do not duplicate CONFIG_PID_FILE_PATH and ".pid" strings
text	   data	    bss	    dec	    hex	filename
 981737	    485	   7296	 989518	  f194e	busybox_old
 981704	    485	   7296	 989485	  f192d	busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-03-17 19:48:39 +01:00
Denys Vlasenko
8502fa8747 ntpd: increase SLEW_THRESHOLD from 0.125 to 0.5
Linux kernel supports it since ~2006

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-02-15 14:32:08 +01:00
Denys Vlasenko
b097a84d62 config: update size information
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-12-28 03:20:17 +01:00
Denys Vlasenko
0d18e5cab2 ntpd: do not SEGV on "-p keyno:192.168.1.1", show --help instead
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-25 00:42:56 +01:00
Denys Vlasenko
63d053d8c3 ntpd: default to FEATURE_NTP_AUTH=y
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-10-30 23:07:26 +01:00
Brandon P. Enochs
a541314b1f ntpd: add support for MD5/SHA1 message authentication
Add support for MD5 message authentication as described in RFC 5905.
This patch also supports SHA1 authentication.

The key file format is the same file format as used by ntpd.
The configuration file format follows standard Unix conventions
(# comments) with lines consist of the following fields separated by whitespace:
<key identifier, [1,65535]> <SHA1|MD5> <an ASCII string of up to 20 characters|an octet string [a-zA-F0-9] of up to 40 characters>.

https://www.ietf.org/rfc/rfc5905.txt

function                                             old     new   delta
ntp_init                                             473     987    +514
hash                                                   -     125    +125
recv_and_process_peer_pkt                            889     961     +72
packed_usage                                       33066   33130     +64
ntpd_main                                           1226    1277     +51
find_key_entry                                         -      29     +29
add_peers                                            195     207     +12
recv_and_process_client_pkt                          509     514      +5
------------------------------------------------------------------------------
(add/remove: 2/0 grow/shrink: 6/0 up/down: 872/0)             Total: 872 bytes

Signed-off-by: Brandon P. Enochs <enochs.brandon@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-10-27 18:57:37 +02:00
Denys Vlasenko
1303962957 ntpd: more verbose message for "root distance too high" case
Managed to make ntpd on one of my machines to be stuck getting
"root distance too high" all the time, but log is not giving me
more informatin what exactly is happening...

function                                             old     new   delta
select_and_cluster                                  1045    1095     +50

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-09-13 12:15:36 +02:00
Denys Vlasenko
9b1c8bf89b ntpd: show real, unclamped delays on low-latency networks
On fast network, I've seen "delay:0.002000" shown for all packets,
thus completely losing information on what real delays are.

The new code is careful to not reject packets with tiny delays
if the delay "grows a lot" but is still tiny:
0.000009 is "much larger" than 0.000001 (nine times larger),
but is still very good small delay.

function                                             old     new   delta
recv_and_process_peer_pkt                            863     889     +26

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-03 11:14:22 +02:00
Denys Vlasenko
79153cb6bc htpd: increase MIN_FREQHOLD by 3
This means we'll start correcting frequency ~5 minutes after start,
not ~3.5 ones.

With previos settings I still often see largish ~0.7s initial offsets
only about 1/2 corrected before frequency correction kicks in,
resulting in ~200ppm "correction" which is then slowly undone.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-25 14:58:49 +02:00
Denys Vlasenko
029bd187bd ntpd: increase minimum G.FREQHOLD_cnt from 8 to 10
With ~0.9 initiall offsets, using 8 results in a bit too eager
frequency correction.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-02 16:18:34 +02:00
Codarren Velvindron
7c43d43117 ntpd: deprecate IPTOS_LOWDELAY in favor of IPTOS_DSCP_AF21
Update QoS markers.
Use DSCP AF21 for interactive traffic. DSCP is defined in RFC2474.
Many modern equipment no longer support IPTOS.

Signed-off-by: Codarren Velvindron <codarren@hackers.mu>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-06-24 20:03:55 +02:00
Denys Vlasenko
7bcde5f00d libbb.h: always include sys/resource.h
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-04-08 17:23:27 +02:00
Denys Vlasenko
448fdcc17d ntpd: choose initial FREQHOLD_cnt dynamically
function                                             old     new   delta
update_local_clock                                   834     858     +24

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-03-11 17:08:02 +01:00
Denys Vlasenko
39dfb4de38 ntpd: suppress in-kernel frequency correction in first 8 adjtimex calls
In other words: try to correct initially existing clock offset first,
before assuming that our clock drifts.

function                                             old     new   delta
update_local_clock                                   826     834      +8
ntp_init                                             550     557      +7
filter_datapoints                                    179     173      -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 15/-6)               Total: 9 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-03-10 21:25:53 +01:00
Denys Vlasenko
36acc4631c ntpd: do run the script at leat once in 11 minutes
function                                             old     new   delta
ntpd_main                                           1197    1226     +29

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-12-26 20:19:37 +01:00
Denys Vlasenko
d5c1482fba ntpd: skip over setting next DNS resolution attempt if it is not needed
function                                             old     new   delta
ntpd_main                                           1177    1197     +20
resolve_peer_hostname                                127     129      +2

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-10-31 16:53:23 +01:00
Denys Vlasenko
59a5604a79 ntpd: mention in help text that -d can be repeated
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-10-31 12:47:27 +01:00
Denys Vlasenko
6a4f223122 ntpd: improve treatment of DNS resolution failures
function                                             old     new   delta
ntpd_main                                           1106    1177     +71
resolve_peer_hostname                                122     127      +5
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 76/0)               Total: 76 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-10-31 12:44:37 +01:00
Denys Vlasenko
a1e9bc6876 ntpd: perform DNS resolution out of send/receive loop - closes 10466
Bad case: send request to server1good.com; then try to resolve server2bad.com -
this fails, and failure takes ~5 secs; then receive server1's
response 5 seconds later. We'll never sync up in this case...

function                                             old     new   delta
ntpd_main                                           1079    1106     +27

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-10-28 17:56:43 +02:00
Denys Vlasenko
8b77a9ea81 *: fix fallout from opt_complementary conversion
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-08-23 15:08:25 +02:00
Denys Vlasenko
22542eca18 getopt32: remove opt_complementary
function                                             old     new   delta
vgetopt32                                           1318    1392     +74
runsvdir_main                                        703     713     +10
bb_make_directory                                    423     425      +2
collect_cpu                                          546     545      -1
opt_chars                                              3       -      -3
opt_complementary                                      4       -      -4
tftpd_main                                           567     562      -5
ntp_init                                             476     471      -5
zcip_main                                           1266    1256     -10
xxd_main                                             428     418     -10
whois_main                                           140     130     -10
who_main                                             463     453     -10
which_main                                           212     202     -10
wget_main                                           2535    2525     -10
watchdog_main                                        291     281     -10
watch_main                                           222     212     -10
vlock_main                                           399     389     -10
uuencode_main                                        332     322     -10
uudecode_main                                        316     306     -10
unlink_main                                           45      35     -10
udhcpd_main                                         1482    1472     -10
udhcpc_main                                         2762    2752     -10
tune2fs_main                                         290     280     -10
tunctl_main                                          366     356     -10
truncate_main                                        218     208     -10
tr_main                                              518     508     -10
time_main                                           1134    1124     -10
tftp_main                                            286     276     -10
telnetd_main                                        1873    1863     -10
tcpudpsvd_main                                      1785    1775     -10
taskset_main                                         521     511     -10
tar_main                                            1009     999     -10
tail_main                                           1644    1634     -10
syslogd_main                                        1967    1957     -10
switch_root_main                                     368     358     -10
svlogd_main                                         1454    1444     -10
sv                                                  1296    1286     -10
stat_main                                            104      94     -10
start_stop_daemon_main                              1028    1018     -10
split_main                                           542     532     -10
sort_main                                            796     786     -10
slattach_main                                        624     614     -10
shuf_main                                            504     494     -10
setsid_main                                           96      86     -10
setserial_main                                      1132    1122     -10
setfont_main                                         388     378     -10
setconsole_main                                       78      68     -10
sendmail_main                                       1209    1199     -10
sed_main                                             677     667     -10
script_main                                         1077    1067     -10
run_parts_main                                       325     315     -10
rtcwake_main                                         454     444     -10
rm_main                                              175     165     -10
reformime_main                                       119     109     -10
readlink_main                                        123     113     -10
rdate_main                                           246     236     -10
pwdx_main                                            189     179     -10
pstree_main                                          317     307     -10
pscan_main                                           663     653     -10
popmaildir_main                                      818     808     -10
pmap_main                                             80      70     -10
nc_main                                             1042    1032     -10
mv_main                                              558     548     -10
mountpoint_main                                      477     467     -10
mount_main                                          1264    1254     -10
modprobe_main                                        768     758     -10
modinfo_main                                         333     323     -10
mktemp_main                                          200     190     -10
mkswap_main                                          324     314     -10
mkfs_vfat_main                                      1489    1479     -10
microcom_main                                        715     705     -10
md5_sha1_sum_main                                    521     511     -10
man_main                                             867     857     -10
makedevs_main                                       1052    1042     -10
ls_main                                              563     553     -10
losetup_main                                         432     422     -10
loadfont_main                                         89      79     -10
ln_main                                              524     514     -10
link_main                                             75      65     -10
ipcalc_main                                          544     534     -10
iostat_main                                         2397    2387     -10
install_main                                         768     758     -10
id_main                                              480     470     -10
i2cset_main                                         1239    1229     -10
i2cget_main                                          380     370     -10
i2cdump_main                                        1482    1472     -10
i2cdetect_main                                       682     672     -10
hwclock_main                                         406     396     -10
httpd_main                                           741     731     -10
grep_main                                            837     827     -10
getty_main                                          1559    1549     -10
fuser_main                                           297     287     -10
ftpgetput_main                                       345     335     -10
ftpd_main                                           2232    2222     -10
fstrim_main                                          251     241     -10
fsfreeze_main                                         77      67     -10
fsck_minix_main                                     2921    2911     -10
flock_main                                           314     304     -10
flashcp_main                                         740     730     -10
flash_eraseall_main                                  833     823     -10
fdformat_main                                        532     522     -10
expand_main                                          680     670     -10
eject_main                                           335     325     -10
dumpleases_main                                      630     620     -10
du_main                                              314     304     -10
dos2unix_main                                        441     431     -10
diff_main                                           1350    1340     -10
df_main                                             1064    1054     -10
date_main                                           1095    1085     -10
cut_main                                             961     951     -10
cryptpw_main                                         228     218     -10
crontab_main                                         575     565     -10
crond_main                                          1149    1139     -10
cp_main                                              370     360     -10
common_traceroute_main                              3834    3824     -10
common_ping_main                                    1767    1757     -10
comm_main                                            239     229     -10
cmp_main                                             655     645     -10
chrt_main                                            379     369     -10
chpst_main                                           704     694     -10
chpasswd_main                                        308     298     -10
chown_main                                           171     161     -10
chmod_main                                           158     148     -10
cat_main                                             428     418     -10
bzip2_main                                           120     110     -10
blkdiscard_main                                      264     254     -10
base64_main                                          221     211     -10
arping_main                                         1665    1655     -10
ar_main                                              556     546     -10
adjtimex_main                                        406     396     -10
adduser_main                                         882     872     -10
addgroup_main                                        411     401     -10
acpid_main                                          1198    1188     -10
optstring                                             11       -     -11
opt_string                                            18       -     -18
OPT_STR                                               25       -     -25
ubi_tools_main                                      1288    1258     -30
ls_options                                            31       -     -31
------------------------------------------------------------------------------
(add/remove: 0/6 grow/shrink: 3/129 up/down: 86/-1383)      Total: -1297 bytes
   text	   data	    bss	    dec	    hex	filename
 915428	    485	   6876	 922789	  e14a5	busybox_old
 914629	    485	   6872	 921986	  e1182	busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-08-08 21:55:02 +02:00
Denys Vlasenko
72089cf6b4 config: deindent all help texts
Those two spaces after tab have no effect, and always a nuisance when editing.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-07-21 09:50:55 +02:00
Denys Vlasenko
4eed2c6c50 Update menuconfig items with approximate applet sizes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-07-18 22:01:24 +02:00
Denys Vlasenko
10ad622dc2 Spelling fixes in comments, documentation, tests and examples
By klemens <ka7@github.com>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-04-17 16:13:32 +02:00
Denys Vlasenko
1bfc4b85a7 ntpd: print result of hostname resolution
This is particularly useful if hostname resolution is triggered by
host non-reachability: I saw this in real-life, without the message
it is not at all obvious that IP that we use for a specific host
has changed.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-01-19 14:42:34 +01:00
Natanael Copa
b62ea34afe ntpd: improve postponed hostname resolution
Run the namelookup from the main loop so a misspelled first ntp server
name does not block everything forever.

This fixes the following situation which would block forever:
  $ sudo ./busybox ntpd -dn -p foobar  -p pool.ntp.org
  ntpd: bad address 'foobar'
  ntpd: bad address 'foobar'
  ntpd: bad address 'foobar'
  ...

New behavior:
  ntpd: bad address 'foobar'
  ntpd: sending query to 137.190.2.4
  ntpd: reply from 137.190.2.4: offset:-1.009775 delay:0.175550 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x01
  ntpd: sending query to 137.190.2.4
  ntpd: reply from 137.190.2.4: offset:-1.009605 delay:0.175461 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x03
  ntpd: sending query to 137.190.2.4
  ntpd: reply from 137.190.2.4: offset:-1.005327 delay:0.167027 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x07
  ntpd: sending query to 137.190.2.4
  ntpd: bad address 'foobar'
  ntpd: reply from 137.190.2.4: offset:-1.046349 delay:0.248705 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x0f

This patch is based on Kaarle Ritvanens work.
http://lists.busybox.net/pipermail/busybox/2016-May/084197.html

function                                             old     new   delta
ntpd_main                                           1061    1079     +18
ntp_init                                             556     560      +4
resolve_peer_hostname                                 81      75      -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 22/-6)              Total: 16 bytes

Signed-off-by: Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-01-06 16:21:09 +01:00
Denys Vlasenko
47367e1d50 Convert all networking/* applets to "new style" applet definitions
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-11-23 09:05:14 +01:00
Miroslav Lichvar
150dc7a2b4 ntpd: respond only to client and symmetric active packets
The busybox NTP implementation doesn't check the NTP mode of packets
received on the server port and responds to any packet with the right
size. This includes responses from another NTP server. An attacker can
send a packet with a spoofed source address in order to create an
infinite loop of responses between two busybox NTP servers. Adding
more packets to the loop increases the traffic between the servers
until one of them has a fully loaded CPU and/or network.

Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-01 20:25:06 +02:00
Denys Vlasenko
237bedd499 getopt32: add new syntax of 'o:+' and 'o:*' for -o NUM and -o LIST
In many cases, this aqllows to drop use of opt_complementary.
Approximately -400 bytes:

function                                             old     new   delta
getopt32                                            1423    1502     +79
opt_string                                            17      18      +1
OPT_STR                                               24      25      +1
uniq_main                                            416     406     -10
timeout_main                                         279     269     -10
sulogin_main                                         270     260     -10
readprofile_main                                    1825    1815     -10
ps_main                                              543     533     -10
pidof_main                                           245     235     -10
pgrep_main                                           611     601     -10
od_main                                             2600    2590     -10
mkfs_minix_main                                     2684    2674     -10
mkfs_ext2_main                                      2603    2593     -10
microcom_main                                        712     702     -10
makemime_main                                        315     305     -10
ionice_main                                          282     272     -10
inetd_main                                          2074    2064     -10
ifplugd_main                                        1144    1134     -10
halt_main                                            353     343     -10
getopt_main                                          636     626     -10
fdisk_main                                          2854    2844     -10
env_main                                             206     196     -10
dmesg_main                                           319     309     -10
conspy_main                                         1214    1204     -10
awk_main                                             981     971     -10
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/22 up/down: 81/-220)         Total: -139 bytes
   text	   data	    bss	    dec	    hex	filename
 919373	    906	  14060	 934339	  e41c3	busybox_old
 918969	    906	  14060	 933935	  e402f	busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-07-06 21:58:02 +02:00
Denys Vlasenko
aabb0a93e9 ntpd: daemonize before DNS resolution
This resolves the following use case problem:

"I start ntpd by default from /etc/init.d

There might be no working network connection (not configured properly for
whatever reason, hardware problems, whatelse).

With busybox 1.25 ntpd seems to loop forever if now NTP servers are found,
blocking the boot process  and I never get a login to solve a possible pb or
to do a first time configuration."

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-07-03 17:58:54 +02:00
Denys Vlasenko
e4caf1dd9c ntpd: retry initial DNS resolution (forever, no timeout for now).
Some users start ntpd on boot, and don't babysit it. If it dies because
DNS is not yet up and therefore NTP servers can't be found, users are
not happy.

Example behavior with a peer name which can't be resolved:

ntpd: bad address 'qwe.rty.ghj.kl'
...5 sec...
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
...

Based on the patch by Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>

function                                             old     new   delta
resolve_peer_hostname                                  -      81     +81
ntpd_main                                           1130    1061     -69
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/1 up/down: 81/-69)             Total: 12 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-06 02:26:49 +02:00
Denys Vlasenko
c8641962e4 ntpd: if peer does not reply anymore, try re-resolving its hostname
function                                             old     new   delta
ntpd_main                                           1053    1130     +77
add_peers                                            166     195     +29

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-04 07:26:08 +01:00
Denys Vlasenko
f37f28199f ntpd: do not use a peer more than once (say, if two peers resolve to the same IP)
function                                             old     new   delta
add_peers                                             98     166     +68

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-04 07:06:53 +01:00
Denys Vlasenko
4c48a64747 ntpd: more informative poll lowering message
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-03 22:02:30 +01:00
Denys Vlasenko
03718bb274 ntpd: print packet delay in clock update message
function                                             old     new   delta
update_local_clock                                   820     826      +6

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-24 01:22:45 +01:00
Denys Vlasenko
383201e725 ntpd: shorter message
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-10 07:06:31 +01:00
Denys Vlasenko
fc47fcefb6 ntpd: step when |offset| > 1 sec, not 0.125 sec
update_local_clock                                   769     820     +51
recv_and_process_peer_pkt                            838     862     +24
reset_peer_stats                                     137     133      -4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 75/-4)              Total: 71 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-10 06:55:07 +01:00