The socket receive buffer turned out to be too small for real world
systems. Use the same size as udevd to be on the safe side. As this is
just a limit and the memory is not allocated by the kernel until really
needed there is actually no memory wasted.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Starting with linux kernel v5.4 squashfs has a more strict parameter
checking implemented. Unlike util-linux mount, busybox never supported
the sizelimit option but simply forwards it to the kernel.
Since v5.4 mounting will fail with
squashfs: Unknown parameter 'sizelimit'
Support the sizelimit parameter by setting it in the LOOP_SET_STATUS64
structure before handing it to the kernel.
While at it also add support for the offset option, which currently will
always be set to 0.
function old new delta
cut_out_ull_opt - 167 +167
singlemount 1230 1266 +36
set_loop 834 862 +28
losetup_main 479 483 +4
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/0 up/down: 235/0) Total: 235 bytes
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The glibc implementation changed for settimeofday, resulting in "invalid
argument" error when attempting to set both timezone and time with a single
call. Fix this by calling settimeofday twice
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
PLATFORM_LINUX is a hidden configuration option which is disabled by
default and enabled at over a hundred locations for features that are
deemed to be Linux specific.
The only effect of PLATFORM_LINUX is to control compilation of
libbb/match_fstype.c. This file is only needed by mount and umount.
Remove all references to PLATFORM_LINUX and compile match_fstype.c
if mount or umount is enabled.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
stime() has been deprecated in glibc 2.31 and replaced with
clock_settime(). Let's replace the stime() function calls with
clock_settime() in preperation.
function old new delta
rdate_main 197 224 +27
clock_settime - 27 +27
date_main 926 941 +15
stime 37 - -37
------------------------------------------------------------------------------
(add/remove: 2/2 grow/shrink: 2/0 up/down: 69/-37) Total: 32 bytes
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
function old new delta
taskset_main 511 855 +344
Based on patch by Fryderyk Wrobel <frd1996@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Back in 2007, commit 0c97c9d437 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().
This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.
Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.
This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.
The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):
Arm: -92 bytes
MIPS: -52 bytes
PPC: -1836 bytes
x86_64: -938 bytes
Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Adds the -d option to run mdev in daemon mode handling hotplug events
from the kernel like udev. If the system generates many hotplug events
this mode of operation will consume less resources than registering
mdev as hotplug helper or using the uevent applet.
function old new delta
daemon_loop - 152 +152
initial_scan - 127 +127
open_mdev_log - 85 +85
mdev_main 255 314 +59
packed_usage 33284 33316 +32
process_action 1051 992 -59
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 2/1 up/down: 455/-59) Total: 396 bytes
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This purely moves code from main() to separate functions for better
extensibility.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
cluster_count is compared against FAT16_MAX, which is defined as 0xfff4
That is the maximum number of cluster a FAT16 can have.
For reference also check the hardware whitepaper from Microsoft
FAT: General Overview of On-Disk Format, version 1.03 page 15
Signed-off-by: Thomas Frauendorfer <tf@miray.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Embedded scripts require a shell to be present in the BusyBox
binary. Allow either ash or hush to be used for this purpose.
If both are enabled ash takes precedence.
The size of the binary is unchanged in the default configuration:
both ash and hush are present but support for embedded scripts
isn't compiled into hush.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
BusyBox has support for embedded shell scripts. Two types can be
distinguished: custom scripts and scripts implementing applets.
Custom scripts should be placed in the 'embed' directory at build
time. They are given a default applet configuration and appear
as applets to the user but no further configuration is possible.
Applet scripts are integrated with the BusyBox build system and
are intended to be used to ship standard applets that just happen
to be implemented as scripts. They can be configured at build time
and appear just like native applets.
Such scripts should be placed in the 'applets_sh' directory. A stub
C program should be written to provide the usual applet configuration
details and placed in a suitable subsystem directory. It may be
helpful to have a configuration option to enable any dependencies the
script requires: see the 'nologin' applet for an example.
function old new delta
scripted_main - 41 +41
applet_names 2773 2781 +8
applet_main 1600 1604 +4
i2cdetect_main 672 674 +2
applet_suid 100 101 +1
applet_install_loc 200 201 +1
applet_flags 100 101 +1
packed_usage 33180 33179 -1
tryexec 159 152 -7
evalcommand 1661 1653 -8
script_names 9 - -9
packed_scripts 123 114 -9
complete_cmd_dir_file 826 811 -15
shellexec 271 254 -17
find_command 1007 990 -17
busybox_main 642 624 -18
run_applet_and_exit 100 78 -22
find_script_by_name 51 - -51
------------------------------------------------------------------------------
(add/remove: 1/2 grow/shrink: 6/9 up/down: 58/-174) Total: -116 bytes
text data bss dec hex filename
950034 477 7296 957807 e9d6f busybox_old
949918 477 7296 957691 e9cfb busybox_unstripped
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
= display default is no longer in cylinders
= +sizeC is no longer supported
= add +sizeT suffix - terabytes are here
= K,M,G,T and k,m,g,t suffixes all are binary, not decimal
= +sizeM results in last sector +(size * 1Mbyte - 1), not +(size * 1Mbyte)
= fix comparison to "YES" answer for sgi/sun
function old new delta
read_int 492 519 +27
fdisk_main 2644 2640 -4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 27/-4) Total: 23 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>