With Linux 4.3, a new set of capabilities has been introduced with the
ambient capabilities. These aim to solve the problem that it was
impossible to grant run programs with elevated privileges across
non-root users. Quoting from capabilities(7):
This is a set of capabilities that are preserved across an execve(2)
of a program that is not privileged. The ambient capability set
obeys the invariant that no capability can ever be ambient if it is
not both permitted and inheritable.
With this new set of capabilities it is now possible to run an
executable with elevated privileges as a different user, making it much
easier to do proper privilege separation.
Note though that the `--ambient-caps` switch is not part of any released
version of util-linux, yet. It has been applied in 0c92194ee (setpriv:
support modifying the set of ambient capabilities, 2017-06-24) and will
probably be part of v2.31.
function old new delta
parse_cap - 174 +174
setpriv_main 1246 1301 +55
.rodata 146307 146347 +40
static.setpriv_longopts 40 55 +15
packed_usage 32092 32079 -13
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The main use case of setpriv is to modify the current state of
privileges available to the calling process and spawn a new executable
with the modified, new state. Next to the already supported case of
modifying the no-new-privs flag, util-linux also supports to modify
capability sets.
This commit introduces to add or drop capabilities from the set of
inheritable capabilities. Quoting from capabilities(7):
This is a set of capabilities preserved across an execve(2).
Inheritable capabilities remain inheritable when executing any
program, and inheritable capabilities are added to the permitted set
when executing a program that has the corresponding bits set in the
file inheritable set.
As such, inheritable capabilities enable executing files with certain
privileges if the file itself has these privileges set. Note though that
inheritable capabilities are dropped across execve when running as a
non-root user.
function old new delta
getcaps - 237 +237
setpriv_main 1129 1246 +117
.rodata 146198 146307 +109
static.setpriv_longopts 29 40 +11
packed_usage 32107 32092 -15
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
As with the previous commit, this commit introduces the ability to dump
the set of ambient capabilities.
function old new delta
setpriv_main 982 1129 +147
.rodata 146148 146198 +50
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
As with the previous commit, this one implements the ability to dump the
capability bounding set.
function old new delta
setpriv_main 838 982 +144
.rodata 146101 146148 +47
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The setpriv executable from util-linux also dumps out information on the
different capability sets known by the kernel. By default, these are the
inheritable capabilities, bounding capabilities and (not yet released)
the ambient capabilities, which have been introduced with Linux 4.3.
This patch introduces the ability to dump the set of inheritable
capabilities.
By default, setpriv(1) identifies capabilities by their human-readable
name, for example 'net_admin'. For unknown capabilities, though, it does
instead use the capability's value, for example 'cap_12', which is
equivalent to 'net_admin'. As there is no kernel interface to retrieve
capability names by their index, we have to declare these ourselves,
which adds to setpriv's size.
To counteract, using the human-readble name has been made configurable.
The following sizes are with the 'FEATURE_SETPRIV_CAPABILITY_NAMES'
enabled:
function old new delta
.rodata 145969 146405 +436
setpriv_main 467 842 +375
capabilities - 304 +304
And with 'FEATURE_SETPRIV_CAPABILITY_NAMES' disabled:
function old new delta
setpriv_main 467 838 +371
.rodata 145969 146101 +132
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Introduce the ability to dump the state of the no-new-privs flag, which
states whethere it is allowed to grant new privileges.
function old new delta
setpriv_main 419 467 +48
.rodata 145926 145969 +43
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
setpriv from util-linux has an option to dump the current state
regarding privilege settings via '--dump'. It prints out information on
the real and effective user and group IDs, supplementary groups, the
no-new-privs flag, the capability sets as well as secure bits.
This patch is the start of supporting this mode. To make introduction of
the '--dump' easier to reason about, its introduction has been split
into multiple patches. This particular one introduces the ability to
print out user and group information of the current process.
function old new delta
setpriv_main 89 322 +233
getresuid - 41 +41
getresgid - 41 +41
static.setpriv_longopts 22 29 +7
packed_usage 31675 31669 -6
------------------------------------------------------------------------------
(add/remove: 4/0 grow/shrink: 2/1 up/down: 322/-6) Total: 316 bytes
Patch by Patrick Steinhardt <ps@pks.im>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The current option parsing logic of setpriv only supports the case where
we want to execute a sub-program and have at most one argument. Refactor
handling of options to solve these shortcomings to make it easy to
support 'setpriv --dump', which does not accept any additional
arguments, as well as the case where additional options are passed to
setpriv. This is done by handling 'argc' ourselves, throwing an error
when no program is specified, as well as introducing an enum for the
different option bitmasks.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
By default, the 'getopt32' call will continue parsing the command line
even after hitting a non-option string. But in setpriv, this should be
avoided, as all parameters following the initial non-option argument are
in fact arguments to the binary that is to be executed by setpriv.
Otherwise, calling e.g. 'busybox setpriv ls -l' would result in an error
due to the unknown parameter "-l".
Fix the issue by passing "+" as the first character in the options
string. This will cause 'getopt32' to stop processing after hitting the
first non-option.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add a minimal 'setpriv' implementation supporting the NO_NEW_PRIVS bit.
Typical usage:
$ busybox setpriv sudo uname
Linux
$ busybox setpriv --nnp sudo uname
sudo: effective uid is not 0, is /usr/bin/sudo on a file system with
the 'nosuid' option set or an NFS file system without root privileges?
function old new delta
packed_usage 31580 31685 +105
setpriv_main - 87 +87
prctl - 53 +53
static.setpriv_longopts - 22 +22
applet_names 2620 2628 +8
applet_main 1516 1520 +4
------------------------------------------------------------------------------
(add/remove: 5/0 grow/shrink: 3/0 up/down: 279/0) Total: 279 bytes
Signed-off-by: Assaf Gordon <assafgordon@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
NAME
fallocate - preallocate or deallocate space to a file
SYNOPSIS
fallocate [-c|-p|-z] [-o offset] -l length [-n] filename
fallocate -d [-o offset] [-l length] filename
DESCRIPTION
fallocate is used to manipulate the allocated disk space for a file,
either to deallocate or preallocate it. For filesystems which support
the fallocate system call, preallocation is done quickly by allocating
blocks and marking them as uninitialized, requiring no IO to the data
blocks. This is much faster than creating a file by filling it with
zeroes.
function old new delta
fallocate_main - 179 +179
applet_names 2597 2606 +9
applet_main 1504 1508 +4
applet_suid 94 95 +1
applet_install_loc 188 189 +1
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
NAME
fsfreeze - suspend access to a filesystem (Ext3/4, ReiserFS, JFS, XFS)
SYNOPSIS
fsfreeze --freeze|--unfreeze mountpoint
DESCRIPTION
fsfreeze suspends or resumes access to a filesystem.
fsfreeze halts any new access to the filesystem and creates a stable
image on disk.
AVAILABILITY
The fsfreeze command is part of the util-linux 2.28
function old new delta
fsfreeze_main - 81 +81
applet_names 2597 2606 +9
applet_main 1504 1508 +4
applet_suid 94 95 +1
applet_install_loc 188 189 +1
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Busybox is very often used in initramfs at the end of which usually
there is a switch_root to the actual rootfs. There are many cases where
the console kernel argument is either just a placeholder (for example
RaspberryPi uses serial0 and serial1) or configured as null to avoid any
console messages - usually you would see such of a setup in production
environments.
Currently busybox bails out if can't open the console argument. If this
happenes in initramfs and if the console=null for example, you get in a
blind kernel panic. Avoid this by only warning instead of dying.
function old new delta
switch_root_main 371 368 -3
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This reverts commit 86a03bee1d.
Since now our "mount -oloop" creates AUTOCLEARed loopdevs, we no longer
need our umount to destroy loopdevs to match the usual util-linux behaviour.
Now this revert fixes another, opposite bug: "explicit" mount /dev/loopN
and then umount must not drop loopdevs!
User complaint is as follows:
It seems LOOP_CLR_FD called on a loop-*partition* removes the mapping of
the whole *device* - which results in the following:
root@LEDE:/# loop=$(losetup -f)
root@LEDE:/# echo ${loop}
/dev/loop2
root@LEDE:/# losetup ${loop} /IMAGE
root@LEDE:/# ls -l ${loop}*
brw------- 1 root root 7, 2 Mar 6 20:09 /dev/loop2
root@LEDE:/# partprobe ${loop}
root@LEDE:/# ls -l ${loop}*
brw------- 1 root root 7, 2 Mar 6 20:09 /dev/loop2
brw------- 1 root root 259, 8 Mar 6 21:59 /dev/loop2p1
brw------- 1 root root 259, 9 Mar 6 21:59 /dev/loop2p2
brw------- 1 root root 259, 10 Mar 6 21:59 /dev/loop2p3
brw------- 1 root root 259, 11 Mar 6 21:59 /dev/loop2p4
brw------- 1 root root 259, 12 Mar 6 21:59 /dev/loop2p5
brw------- 1 root root 259, 13 Mar 6 21:59 /dev/loop2p6
brw------- 1 root root 259, 14 Mar 6 21:59 /dev/loop2p7
brw------- 1 root root 259, 15 Mar 6 21:59 /dev/loop2p8
root@LEDE:/# mount ${loop}p8 /MOUNT # mount loop partition
root@LEDE:/# losetup -a | grep $loop # loop dev mapping still there
/dev/loop2: 0 /mnt/IMAGE
root@LEDE:/# strace umount /MOUNT 2> /log # unmount loop partition
root@LEDE:/# losetup -a | grep ${loop} # loop device mapping is gone
root@LEDE:/# grep -i loop /log
open("/dev/loop2p7", O_RDONLY|O_LARGEFILE) = 3
ioctl(3, LOOP_CLR_FD) = 0
root@LEDE:/#
The strace was done to figure out, if maybe umount wrongly ioctl()'s the
parent device instead of the partition - it doesn't.
I already wasn't a fan of umount implicitly removing the mapping in the
first place (as I usually setup and release loop devices with `losetup`
and scripts needed to call umount differently in order to work and
outside busybox).
However taking above (kernel-)behaviour into account - umount calling
ioctl(LOOP_CLR_FD) unconditionally potentially causes some nasty side
effects
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The "autolooped" mount (mount [-oloop] IMAGE /DIR/DIR)
always creates AUTOCLEARed loopdevs, so that umounting
drops them (and this does not require any code in the
umount userspace).
This happens since circa linux-2.6.25:
commit 96c5865559cee0f9cbc5173f3c949f6ce3525581
Date: Wed Feb 6 01:36:27 2008 -0800
Subject: Allow auto-destruction of loop devices
IOW: in this case, umount does not have to use -d
to drop the loopdev.
The explicit loop mount (mount /dev/loopN /DIR/DIR)
does not do this. In this case, umount without -d
should not drop loopdev.
Unfortunately, bbox umount currently always implies -d,
this probably needs fixing.
function old new delta
set_loop 537 597 +60
singlemount 1101 1138 +37
losetup_main 419 432 +13
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 110/0) Total: 110 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
While at it, tweaked hexdump --help
function old new delta
xxd_main 364 414 +50
packed_usage 31097 31114 +17
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Redundant help texts (one which only repeats the description)
are deleted.
Descriptions and help texts are trimmed.
Some config options are moved, even across menus.
No config option _names_ are changed.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Alpine Linux stumbled over "more -s":
http://bugs.alpinelinux.org/issues/5190
function old new delta
more_main 857 872 +15
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This makes it possible to use scoped IPv6 addresses:
mount -t cifs -o ip=<ADDR>%<iface_id> //<ADDR>/test test
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Gives "mount -t cifs //fe80::6a05:caff:fe3e:dbf5%eth0/test test"
a chance to work: mount must pass "ip=numeric_IPv6%numeric_iface_id"
in the omunt option string. Currently, it does not.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Currently some new devices that have a bus but no class will
be missed by mdev coldplug device creation after boot. This
happens because mdev recursively searches /sys/class which will
by definition only find class devices.
Some important devices such as iio and gpiochip does not have
a class. But users will need them.
This switches from using /sys/class as the place to look for
devices to create to using /sys/dev where all char and block
devices are listed.
The subsystem lookup code that provide the G.subsystem
environment variable is changed from using the directory
name of the class device to instead dereference the
"subsystem" symlink for the device, and look at the last
element of the path of the symlink for the subsystem, which
will work with class devices and bus devices alike. (The new
bus-only devices only symlink to the /sys/bus/* hierarchy.)
We delete the legacy kernel v2.6.2x /sys/block device path
code as part of this change. It's too old to be kept alive.
Tested on kernel v4.6-rc2 with a bunch of devices, including
some IIO and gpiochip devices.
With a print inserted before make_device() the log looks
like so:
Create device from "/sys/dev/char/1:1", subsystem "mem"
Create device from "/sys/dev/char/1:2", subsystem "mem"
Create device from "/sys/dev/char/1:3", subsystem "mem"
Create device from "/sys/dev/char/1:5", subsystem "mem"
(...)
Create device from "/sys/dev/block/179:56", subsystem "block"
Create device from "/sys/dev/block/179:64", subsystem "block"
function old new delta
mdev_main 1388 1346 -42
dirAction 134 14 -120
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-162) Total: -162 bytes
Cc: Isaac Dunham <ibid.ag@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
"Total allocated sectors 2021315 greater than the maximum 2020356"
maximum what?
Turns out, that's the CHS size of the disk.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Before:
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 998 255471+ 6 FAT16
What are "blocks"? What is that "+"?
How big is this partition?
Is start/end shown came from LBA fields or CHS fields?
Why are we torturing the user??
After:
Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type
/dev/sdb1 * 0,1,1 996,15,32 32 510974 510943 249M 6 FAT16
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The result of looking at "grep -F -B2 '*fill*' busybox_unstripped.map"
text data bss dec hex filename
829901 4086 1904 835891 cc133 busybox_before
829665 4086 1904 835655 cc047 busybox
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
function old new delta
blkdiscard_main - 264 +264
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
CC util-linux/swaponoff.o
cc1: warnings being treated as errors
util-linux/swaponoff.c: In function 'swap_enable_disable':
util-linux/swaponoff.c💯 warning: passing argument 1 of 'resolve_mount_spec' from incompatible pointer type
make[1]: *** [util-linux/swaponoff.o] Error 1
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The -e option should only apply to swapon, and it should swallow all
errors/warnings when the device does not exist. So delete the flag
from the swapoff patch and unify the check in the swapoff path.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This commit adds support for the -R flag of setarch, which disables
randomization of the virtual address space.
function old new delta
setarch_main 115 150 +35
packed_usage 30664 30651 -13
Signed-off-by: Jan Heylen <heyleke@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Make umount -f more compatible with util-linux 2.22.2.
Before:
* 'umount -f': calls umount syscall,
if it fails calls umount2 with 'MNT_FORCE'
* 'mount -f -l': calls umount syscall,
if it fails calls umount2 with 'MNT_LAZY'. 'MNT_FORCE' dropped
After:
* 'umount -f': calls umount2 syscall with 'MNT_FORCE'
* 'mount -f -l': calls umount2 syscall with 'MNT_LAZY' and 'MNT_FORCE'
function old new delta
umount 45 - -45
umount_main 610 555 -55
Signed-off-by: Anton Bondarenko <anton.bondarenko@axis.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Similar to the "big" util-linux version. For !DMESG_PRETTY, the option is accepted
(but ignored) as well, for compatibility reasons.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
In commit b5c7220e7b
"fbset: respect rgba configuration lines in fb.modes"
I somehow managed to swap the offset/length markers around.
The man page for fb.modes says it should be offset/length
not length/offset as I was accidentally parsing it.
As my fb.modes file was also reversed I didn't notice
until I tried someone elses fb.modes file. Mea culpa.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Introduce a library routine to package the idiom:
p = xmalloc(b, n);
memcpy(p, b, n);
and use it where possible. The example in traceroute used xzalloc
but it didn't need to.
function old new delta
xmemdup - 32 +32
last_main 834 826 -8
make_device 2321 2311 -10
common_traceroute_main 3698 3685 -13
readtoken1 3182 3168 -14
procps_scan 1222 1206 -16
forkchild 655 638 -17
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/6 up/down: 32/-78) Total: -46 bytes
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This was seen to happen if two mdevs are run in parallel,
mdev.seq is empty, and the "newer" one manages to write it first.
function old new delta
mdev_main 1366 1388 +22
atoll - 20 +20
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
function old new delta
mount_main 1221 1241 +20
packed_usage 30616 30610 -6
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Isaac Dunham <ibid.ag@gmail.com>
Without this patch acpid can't log the events at all. Moreover it tries
to truncate log file every time.
Signed-off-by: Serj Kalichev <serj.kalichev@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
1) real swapon/swapoff handles also devices on the commandline with -a;
2) xstat(device) in swap_enable_disable aborts on error when cycling through
fstab so some devices are not handled;
3) duplicated code for ENABLE_FEATURE_SWAPON_DISCARD and
ENABLE_FEATURE_SWAPON_PRI was moved to functions.
4) silence some error messages with -a;
5) minor cleanups and code refactoring reduced the size as per bloat-check:
6) I also added support for /proc/swaps handling to swapoff:
"When the -a flag is given, swapping is disabled on all known swap devices
and files (as found in /proc/swaps or /etc/fstab)."
So now swapoff first cycles through /proc/swaps and then through fstab
to swapoff all devices.
function old new delta
set_discard_flag - 106 +106
swap_enable_disable 147 238 +91
set_priority_flag - 79 +79
retrieve_file_data 470 467 -3
swap_on_off_main 638 418 -220
------------------------------------------------------------------------------
(add/remove: 2/0 grow/shrink: 1/2 up/down: 276/-223) Total: 53 bytes
Signed-off-by: Tito Ragusa <farmatito@tiscali.it>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Swap entries in /etc/fstab inherit the priority specified on the command line unless they have 'pri' in their mount options.
Signed-off-by: Matt Whitlock <busybox@mattwhitlock.name>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Also, the maximum allowable value of swap priority is technically SWAP_FLAG_PRIO_MASK >> SWAP_FLAG_PRIO_SHIFT.
Signed-off-by: Matt Whitlock <busybox@mattwhitlock.name>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
rand() is the most standard C library function,
and on uclibc they are the same. I guess
they are the same in most todays' libc...
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Also, use the name of the block device we found, not necessarily the one
we got from the user:
fstrim -v /
/dev/sdj: 4711 bytes were trimmed
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
fstrim applet is a port from util-linux.
"Trimming" your NAND/eMMC storage will restore the write performance
back to normal after having slow down issues on sequential write and
random write due to usage over time.
Good reading on subject:
http://forum.xda-developers.com/showthread.php?t=1971852
(with long options and CLEAN_UP turned on)
function old new delta
.rodata 148494 148791 +297
fstrim_main - 283 +283
fstrim_sfx - 128 +128
packed_usage 28826 28903 +77
applet_main 2760 2768 +8
applet_names 2343 2350 +7
applet_nameofs 690 692 +2
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 5/0 up/down: 802/0) Total: 802 bytes
Signed-off-by: Malek Degachi <malek-degachi@laposte.net>
Cc: Eugene San (eugenesan) <eugenesan@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Config instructions for util-linux/volume_id are moved into the
source files according to the new config feature.
No code change.
Signed-off-by: Sven-Göran Bergh <sgb@systemasis.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Kbuild instructions for util-linux/volume_id are moved into the
source files according to the new build feature.
No code change.
Signed-off-by: Sven-Göran Bergh <sgb@systemasis.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
"losetup -d" was not complaining that LOOPDEV is missing.
"losetup -a" was listing only up to /dev/loop9.
"losetup -f" looped forever if llop0 was taken, and never tried
anything after /dev/loop9.
"-o" with other options (say, -r) had no effect.
function old new delta
losetup_main 376 419 +43
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
516530c932 uses $DEVNAME variable
for device node name. This is fine, but only works for hotplugging,
"mdev -s" will behave differently when DEVNAME and basename(path)
differ.
This patch extracts the DEVNAME from the uevent sysfs file in
make_device(), thus works for hot- and coldplugging; so using
the environment DEVNAME on hotplug events is no longer necessary.
Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
