After commit 8e74adab01
("libbb: make INET[6]_rresolve use sockaddr2{host,dotted}_noport")
INET_sprint6 uses more than just sin6_addr, it also tries to display the
scope id, which is uninitialized when called from ife_print6.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The -H NAME is deprecated in udhcpc. See commit
2017d48c0d
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
IPv6 routes need the device argument for link-local routes, or they
cannot be used at all. E.g. "gateway fe80::def" seems to be used in
some places, but kernel refuses to insert the route unless device
name is explicitly specified in the route addition.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Saves 87 bytes. Assuming, of course, all platforms have it.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
invarg(a,b) - "invalid argument", but how a and b enter the message?
invarg_1_to_2(a,b) is somewhat easier to read: "invalid argument 'a' to 'b'"
Audit of usage revealed a number of bad uses, with too long messages.
text data bss dec hex filename
938848 932 17448 957228 e9b2c busybox_old
938788 932 17448 957168 e9af0 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This patch ports the 'ip neigh' command, originally written by Alexey
Kuznetsov, <kuznet@ms2.inr.ac.ru>, to busybox.
The base of the port is the version of iproute that shipped with
Debian Squeeze, taken from:
http://http.debian.net/debian/pool/main/i/iproute/iproute_20100519.orig.tar.gz
This patch has actively been used by the Open Network Install
Environment (ONIE) project for over 3 years without incident.
function old new delta
print_neigh - 933 +933
ipneigh_list_or_flush - 742 +742
get_hz - 109 +109
do_ipneigh - 62 +62
do_iproute 2112 2153 +41
packed_usage 30647 30667 +20
ipneigh_main - 14 +14
static.ip_neigh_commands - 12 +12
static.nuds - 9 +9
static.ip_func_ptrs 32 36 +4
print_route 1858 1727 -131
------------------------------------------------------------------------------
(add/remove: 8/0 grow/shrink: 3/1 up/down: 1946/-131) Total: 1815 bytes
Signed-off-by: Curt Brune <curt@cumulusnetworks.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If FEATURE_WGET_OPENSSL and FEATURE_WGET_SSL_HELPER are both disabled
there's no point in checking for https URLs.
function old new delta
P_HTTPS 6 - -6
.rodata 155501 155469 -32
parse_url 476 423 -53
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 0/2 up/down: 0/-91) Total: -91 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Unfortunately, chroot() works only for root user, because of attacks
on setuid binaries (make DIR/lib/ld-linux.so a shell, hardlink to
a setuid binary, chroot to DIR, execute it and get root shell).
function old new delta
ftpd_main 2160 2180 +20
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Allows using an alternate path for config files.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Christoph J. Thompson <cjsthompson@gmail.com>
Signed-off-by: Michael Bestas <mikeioannina@gmail.com>
When a static interface with explicit gateway and metric in /etc/network/interfaces
is enabled using 'ifup', and further, the BusyBox 'ip' applet is enabled, the
following error message appears at the console (and no default route is added):
ip: either "to" is duplicate, or "prio" is garbage
Tracing ifup reveals that it is attempting to run the following shell command:
ip route add default via <GW> dev <DEVICE> prio <METRIC>
'ip' does not understand the 'prio' argument, causing this error. With 'metric',
it works fine.
Signed-off-by: Alex Dowad <alexinbeijing@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
While RFC1035 recommends a label not to start with a number, there is
actually no such limitation in dns. One may buy a domain name like
0x1.net and use it.
This commit remove this check and allow a user to use such domains.
Signed-off-by: Arthur Gautier <baloo@gandi.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Introduce a library routine to package the idiom:
p = xmalloc(b, n);
memcpy(p, b, n);
and use it where possible. The example in traceroute used xzalloc
but it didn't need to.
function old new delta
xmemdup - 32 +32
last_main 834 826 -8
make_device 2321 2311 -10
common_traceroute_main 3698 3685 -13
readtoken1 3182 3168 -14
procps_scan 1222 1206 -16
forkchild 655 638 -17
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/6 up/down: 32/-78) Total: -46 bytes
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit "zcip: fix link-local IP conflict detection" has introduced
wrong comparsion of source IP with our IP. This leads to a new IP
being picked unnecessarily on every incoming ARP packet.
Signed-off-by: Vladislav Grishenko <themiron@mail.ru>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When 'if -a' runs into an failure on an interface all further
interfaces won't be correctly updated in ifstate. This patch
inserts a new variable that only tracks the current interfaces
failure so that the write to ifstate can rely on this and not
the one for the functions return value.
Fixes https://bugs.busybox.net/show_bug.cgi?id=6212
Signed-off-by: Frank Bergmann <frank.frajasalo@googlemail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
arping: interface eth0 not found: No such device
^^^^
This is because error template is formed before parsing command line arguments,
so it always uses default interface name "eth0".
Signed-off-by: Alexander Korolkov <alexander.korolkov@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Based on the patch by Zheng Junling <zhengjunling@huawei.com>
and Chen Gang <cg.chen@huawei.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
(re-sending this as it got ignored completey and the format of the
previous mail was probably not correct - please let me know if there's
anything else I can do to get this trivial fix applied)
for telnetd to work, we only need CONFIG_UNIX98_PTYS to be enabled
in the Linux kernel - DEVPTS_FS has been obsolete for some time
Signed-off-by: Martin Kaiser <lists@kaiser.cx>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This speeds up syncing - now happens only just
two replies from a peer. Especially useful for "ntpd -q".
Shouldn't have ill effects: if we chose a bad peer,
we will discover it later and switch to another one.
The code is even smaller this way.
Suggested by Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
We wanted to detect when tv_sec = unsigned1 - unsigned2
underflows by looking at tv_sec's sign. But if tv_sec
is long and it is wider than unsigned, we get unsigned -> long
conversion which is in this case never negative.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
OpenNTPd is licensed under ISC-style license so it's good idea to keep
ntpd applet under same license to avoid mess, instead of having
our changes to be under GPL.
Names of original code's authors are added.
Signed-off-by: Adam Tkac <vonsch@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Prevent nasty surprises if script runs longer than lease time / 2.
Signed-off-by: John Schroeder <jschroed@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Based on the following user report:
I ran into an issue where I was seeing a long delay in the scripts called
in udhcp_run_script. I was using an old version of OpenWrt (kamikaze)
and a satellite modem. An NTP script was being called and the modem
would sometimes take a long time to respond to the DNS lookup when
it was offline.
This delay started affecting my lease time. The lease that I would
get from my satellite modem before it was online would be short:
only 60 seconds. The delay with NTP and the modem would typically
be about 18 seconds. This would cause the first DHCP renew request
from dhcpc to be a little late. Under certain circumstances,
I could even see the first DHCP renew to occur after the lease
had expired!
function old new delta
udhcpc_main 2816 2837 +21
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Busybox already uses sendfile in httpd. This patch proposes to use it
globally to copy data between file descriptors.
It speeds up the copying on slow systems a lot - below are the times needed
to copy a 450Mb file with and without this option enabled on a BeagleBone
Black:
sendfile:
user 0m0.000s
sys 0m8.170s
read/write 4k:
user 0m0.470s
sys 0m16.300s
function old new delta
bb_full_fd_action 394 474 +80
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
169.254 may already be used by a local network. This patch allows
specifying your own IP range.
Our particular use case is a mesh network, in which the nodes partaking
were using an IP range specifically assigned for the meshing purpose.
As the LAN side of the mesh node could use 169.254, this default range
was not an option.
function old new delta
zcip_main 1342 1426 +84
pick_nip - 40 +40
packed_usage 29974 29969 -5
pick 34 - -34
------------------------------------------------------------------------------
(add/remove: 1/1 grow/shrink: 1/1 up/down: 124/-39) Total: 85 bytes
Signed-off-by: Michel Stam <m.stam@fugro.nl>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some clients have a very short timeout for sending the DHCP
DISCOVER, shorter than the arpping timeout of 2000 milliseconds
that udhcpd uses by default.
This patch allows tweaking the timeout, or disabling of arpping
altogether, at the risk of handing out addresses which are
already in use.
function old new delta
udhcpd_main 1460 1501 +41
udhcpc_main 2814 2851 +37
packed_usage 29957 29974 +17
arpping 477 493 +16
find_free_or_expired_nip 161 174 +13
send_offer 285 292 +7
nobody_responds_to_arp 85 89 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 7/0 up/down: 135/0) Total: 135 bytes
Signed-off-by: Michel Stam <m.stam@fugro.nl>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The offset to jitter ratio is now calculated before updating
jitter to make the test more sensitive.
function old new delta
ntp_init 460 474 +14
update_local_clock 752 764 +12
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 26/0) Total: 26 bytes
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
To avoid polling servers frequently slowly increase the interval up
to BIGPOLL when
- no replies are received from a peer
- no source can be selected
- peer claims to be unsynchronized (e.g. we are polling it too
frequently)
When recv() returns with an error, drop code to try to continue
on network errors: I'm not convinced those cases happen in real life.
function old new delta
recv_and_process_peer_pkt 919 838 -81
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
* on step, poll interval drops to 8.5 mins instead of 32 seconds
* on total loss of all replies (no replies from any peer
for last 8 requests), also drop poll interval to 8.5 mins
instead of 32 seconds
* on send abd recv errors, RETRY_INTERVAL is now 32 seconds,
not 5 seconds
* on timing out listening to reply, instead of unconditional
shortening poll interval by x4, clamp it to NOREPLY_INTERVAL
(512 seconds)
* if a largish offset is seen, clamp nexp poll interval
to 128 seconds, not 64 seconds
function old new delta
clamp_pollexp_and_set_MAXSTRAT - 37 +37
recv_and_process_peer_pkt 861 869 +8
poll_interval 52 48 -4
update_local_clock 762 752 -10
ntpd_main 1063 1050 -13
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/3 up/down: 45/-27) Total: 18 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The burst mode needs to be stopped even when no replies are received.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some HP PA-RISC firmware always sends fixed 512-byte requests,
with trailing garbage.
function old new delta
tftpd_main 578 572 -6
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
During link-local IP resolution, if a regular ARP request is received
during the ARP probe period, it will incorrectly cause a target IP
conflict. This then leads to a new IP being picked unnecessarily.
Per RFC 3927, section 2.2.1, we should flag a target IP conflict only if
the source IP is null, the target IP matches our IP, and the source
hw addr does not match our hw addr.
function old new delta
zcip_main 1354 1322 -32
Signed-off-by: Ken Sharp <ken.sharp@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
