The realpath utility requires all paths exist when canonicalizing
symlinks. If /etc/resolv.conf points to a tmpfs, then it might
not exist initially. Use `readlink -f` so that we follow all
symlinks that are available.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Sequential run of concurrent mdev's was too simplistic:
they waited for /dev/mdev.seq to match. This could sometimes
cause cumulative loss of time on the order of a second.
Added SIGCHLD signaling from exiting mdev to all other mdev's.
Added debugging required to see that code actually works as intended.
Example of /dev/mdev.log (with "woken up" elevated from dbg lvl 3 to 2):
mdev[1023]: first seq written
^^^^ seq, not pid
mdev[1023]: 35.022395 ACTION:add SUBSYSTEM:module DEVNAME:(null) DEVPATH:/module/lib80211
mdev[1023]: rule matched, line -1
^^^^^^^ means "default rule"
mdev[1023]: 35.022676 exiting
^^^^^^^^^ second,usec timestamp
mdev[1024]: 35.069691 ACTION:add SUBSYSTEM:vc DEVNAME:vcs9 DEVPATH:/devices/virtual/vc/vcs9
mdev[1024]: dev 7,9
mdev[1025]: 35.069889 waiting for '1024'
mdev[1026]: 35.069946 waiting for '1024'
mdev[1027]: 35.070151 waiting for '1024'
mdev[1024]: rule matched, line -1
mdev[1024]: mknod vcs9 (7,9) 20660 0:0
mdev[1024]: 35.070346 exiting
mdev[1025]: woken up
mdev[1026]: woken up
mdev[1025]: 35.071213 ACTION:add SUBSYSTEM:vc DEVNAME:vcsa9 DEVPATH:/devices/virtual/vc/vcsa9
^^^^^^^^^ took only a millisecond to start running after prev mdev exited
mdev[1025]: dev 7,137
mdev[1027]: woken up
mdev[1025]: rule matched, line -1
mdev[1025]: mknod vcsa9 (7,137) 20660 0:0
mdev[1025]: 35.072109 exiting
function old new delta
mdev_main 849 1372 +523
curtime - 59 +59
dirAction 87 134 +47
static.ts - 8 +8
keywords 19 12 -7
make_device 2189 2119 -70
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some shells (like dash) are lame and omit the POSIX increment/decrement
feature (because it is listed as optional). Tweak the shell script to
work in all POSIX variants.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Often it is desirable to have /etc/ be on read-only storage (well, the
whole rootfs) but have things like /etc/resolv.conf be symlinks to a
writable location. Tweak the simple script to support that.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
It was colliding with matching of devnames with slashes.
We need a more generic way to examine env.vars in rules anyway.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
function old new delta
udhcp_str2optset 415 532 +117
Signed-off-by: Michael McTernan <Michael.McTernan.2001@cs.bris.ac.uk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
All kernel version except for 2.4 has the same dep output format.
(Possibly related to era of kernels 3.0+)
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The environment variable containing the IP address allocated by zcip
is "ip" and not "IP".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Also added an example script to show how to compile BusyBox against
Android's bionic.
Signed-off-by: Daniel Fandrich <dan@coneharvesters.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If modules contain circular dependencies, the depmod script will follow
the circle forever. So add a simple sanity check to abort rather than
chew up the CPU.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This change retains "or later" state! No licensing _changes_ here,
only form is adjusted (article, space between "GPL" and "v2" and so on).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
requestip, vendorclass, clientid are client-side variables,
they do not make sense as udhcpd opts
dhcptype is the packet type (not interesting, it's always 5)
userclass needs parser support in order to work
function old new delta
dhcp_options 68 66 -2
read_opt 865 859 -6
dhcp_option_strings 253 203 -50
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-58) Total: -58 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The previous fix up loaded dependencies two deep, but really that was an
incomplete fix as we need to load dependencies all the way down. So change
the code to run recursively through all dependencies.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The helper script needs updating to match latest busybox modprobe behavior
in that all dependencies need to be listed, not just the immediate ones.
Along the way, fix symbol prefixed ports, optimize the output, and add
some more depmod compatible options.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This patch make depmod.pl more robust in cross environment. If native
nm did not recognize target's object, you can override it with NM
environment variable.
Erik,
Attached is a patch for the udhcpc sample scripts, to correct the order in
which routers are applied if the DHCP server provides more than one (as per
section 3.5 of RFC2132).
Apologies for not being on the mailing list and thanks for your continued
efforts.
Simon.
Hello,
Here's a patch for a first attempt at static leases for udhcpd.
Included in the tarball are 2 files (static_leases.c, static_leases.h)
and a patch against the latest cvs.
In the config file you can configure static leases with the following
format:
static_lease 00:60:08:11:CE:4E 192.168.0.54
static_lease 00:60:08:11:CE:3E 192.168.0.44
Comments/suggestions/improvements are welcome.
Wade
binary from modutils. This one, however, can be run on the _host_
system (need not be run on the target) and is fully cross platform, so
even if your target is ARM or powerpc or whatever, this will still
work. When used to support the new modprobe applet, this allows
busybox to fully supplant modutils for architectures supported by
busybox insmod.
-Erik
