$ ./busybox tls kernel.org
insize:0 tail:0
got block len:74
got HANDSHAKE
got SERVER_HELLO
insize:79 tail:4406
got block len:4392
got HANDSHAKE
got CERTIFICATE
entered der @0x8f7e723:0x30 len:1452 inner_byte @0x8f7e727:0x30
entered der @0x8f7e727:0x30 len:1172 inner_byte @0x8f7e72b:0xa0
skipped der 0xa0, next byte 0x02
skipped der 0x02, next byte 0x30
skipped der 0x30, next byte 0x30
skipped der 0x30, next byte 0x30
skipped der 0x30, next byte 0x30
skipped der 0x30, next byte 0x30
entered der @0x8f7e830:0x30 len:418 inner_byte @0x8f7e834:0x30
skipped der 0x30, next byte 0x03
entered der @0x8f7e843:0x03 len:399 inner_byte @0x8f7e847:0x00
copying key bytes:399, first:0x00
insize:4397 tail:9
got block len:4
got SERVER_HELLO_DONE
Now need to teach it to send ClientKeyExchange...
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
write(3, "GET / HTTP/1.1\r\nUser-Agent: Wget\r\nConnection: close\r\n\r\n", 74) = 74
shutdown(3, SHUT_WR) = 0
alarm(900) = 900
read(3, "", 1024) = 0
write(2, "wget: error getting response\n", 29) = 29
exit(1)
The peer simply does not return anything. It closes its connection.
Probably it detects wget closing its writing end: shutdown(3, SHUT_WR).
The point it, closing write side of the socket is _valid_ for HTTP.
wget sent the full request, it won't be sending anything more:
it will only receive the response, and that's it.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Redundant help texts (one which only repeats the description)
are deleted.
Descriptions and help texts are trimmed.
Some config options are moved, even across menus.
No config option _names_ are changed.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When httpd proxies a request to another server, it first creates
an AF_INET socket, then resolves the server name to a sockaddr,
then connects to it. This fails if the server name resolves to
an IPv6 address.
This patch ensures that the socket is created with the correct
address family (AF_INET6 if the server resolves to an IPv6 address
and AF_INET otherwise).
Signed-off-by: Laurent Bercot <ska-dietlibc@skarnet.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Run the namelookup from the main loop so a misspelled first ntp server
name does not block everything forever.
This fixes the following situation which would block forever:
$ sudo ./busybox ntpd -dn -p foobar -p pool.ntp.org
ntpd: bad address 'foobar'
ntpd: bad address 'foobar'
ntpd: bad address 'foobar'
...
New behavior:
ntpd: bad address 'foobar'
ntpd: sending query to 137.190.2.4
ntpd: reply from 137.190.2.4: offset:-1.009775 delay:0.175550 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x01
ntpd: sending query to 137.190.2.4
ntpd: reply from 137.190.2.4: offset:-1.009605 delay:0.175461 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x03
ntpd: sending query to 137.190.2.4
ntpd: reply from 137.190.2.4: offset:-1.005327 delay:0.167027 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x07
ntpd: sending query to 137.190.2.4
ntpd: bad address 'foobar'
ntpd: reply from 137.190.2.4: offset:-1.046349 delay:0.248705 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x0f
This patch is based on Kaarle Ritvanens work.
http://lists.busybox.net/pipermail/busybox/2016-May/084197.html
function old new delta
ntpd_main 1061 1079 +18
ntp_init 556 560 +4
resolve_peer_hostname 81 75 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 22/-6) Total: 16 bytes
Signed-off-by: Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
All other applets are listed simply by their name, no reason why
dumpleases doesn't do that.
Group all udhcpd feature options directly after it.
Put "NOT READY" into udhcpc6 item (some users actually tried to use it,
and complained).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit a8c696bf09 makes ifup and ifdown
individually selectable, but forgets to update the dependency to
IFUPDOWN_UDHCPC_CMD_OPTIONS, so it is not selectable anymore.
This patch fixes the dependency by checking for IFUP or IFDOWN, instead
of the obsolete IFUPDOWN.
Also, it drops dependency on UDHCPC: udhcpc on the target system
does not have to come from the _same_ binary.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
musl does not like including linux/netfilter_ipv4.h
(enum / #define collision in two headers, resulting in "3 = 3"
type situation in enum definition).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
They merely enable ip or ifconfig/route. There is already a way to do this
on the same menuconfig page.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Linux kernel, starting from 2.6.19 allows ip table ids to have 32-bit values.
In order to preserve compatibility, the old 8-bit field: rtm_table is still
in use when table id is lower than 256.
Add support for the 32-bit table id (RTA_TABLE attribute) in:
- ip route print
- ip route modify
- ip rule print
- ip rule modify
Add printing of table ids to ip route.
Changes are compatible with the mainline iproute2 utilities.
These changes are required for compatibility with ConnMan, which by default
uses table ids greater than 255.
function old new delta
print_route 1588 1637 +49
do_iproute 2187 2222 +35
do_iprule 955 987 +32
print_rule 617 630 +13
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/0 up/down: 129/0) Total: 129 bytes
Signed-off-by: Lukasz Nowak <lnowak@tycoint.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
While at it, fix a pathological case where it is not fine:
-r REALM with some 8-kbyte long REALM would overflow the buffer.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
function old new delta
udhcp_get_option 215 220 +5
udhcp_run_script 802 803 +1
Signed-off-by: Brian Foley <bpfoley@google.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Here, not handling the error is would just eat one input 0xff char.
Correct handling would need even more corner case handling,
as-is buggy handling corrupts the buffer.
Since we just been told by kernel that pty is ready,
EAGAIN should not be happening here anyway.
function old new delta
telnetd_main 1798 1785 -13
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
put_iac2(w,c) is mostly used with constants, fold them into one arg
function old new delta
put_iac2_merged - 46 +46
telnet_main 1603 1583 -20
con_escape 285 257 -28
put_iac2 50 - -50
------------------------------------------------------------------------------
(add/remove: 1/1 grow/shrink: 0/2 up/down: 46/-98) Total: -52 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
A bit of future-proofing. Some of them can stand just being ignored.
function old new delta
telnetd_main 1791 1798 +7
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
I managed to reproduce the bug, with some difficulty.
function old new delta
telnetd_main 1780 1791 +11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If a write to pty is short, remove_iacs() can be run on a buffer repeatedly.
This, for example, can eat 0xff chars (IACs, in telnet terms).
Rework the logic to handle IACs in a special "write to pty" function.
function old new delta
telnetd_main 1662 1750 +88
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
By user's request.
Decided to not use fcntl(F_SETLKW) in lieu of problems with locking
on networked filesystems. The existence of /var/run/ifstate.new
is treated as a write lock. rename() provides atomicity.
function old new delta
ifupdown_main 1019 1122 +103
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Also, much improved help text.
function old new delta
packed_usage 30652 30851 +199
tcpudpsvd_main 1782 1784 +2
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Added NOINLINE to two function, since my version of gcc would actualy increase
code size otherwise.
I see no size changes.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
