Commit Graph

621 Commits

Author SHA1 Message Date
Paul Fox
01f67987e0 applying fix for:
0000260: udhcpc doesn't validate client hardware address
2005-07-20 19:13:21 +00:00
Paul Fox
5dc0ceeb9e applying fix for:
0000203: 'ip route flush cache' not implemented
2005-07-20 19:01:05 +00:00
Paul Fox
77ee52333c applying fix for:
0000185: httpd infinite loop when piping to CGI script
2005-07-20 18:42:52 +00:00
Paul Fox
28069404a4 much more concise fix for bug #45. just align the packet... 2005-07-20 11:55:08 +00:00
Paul Fox
146e83a60e applying fix from:
0000108: busyboxy/networking/ftpgetput.c not conforming to
                    RFC 959.  ftpget and ftpput send <LF> as EOL.
2005-07-19 21:26:57 +00:00
Paul Fox
deac371690 applying fix from:
0000088: inetd chargen stream does not generate the
	    characters as recommended in RFC 864
	    Chragen service is generating garbage characters.
2005-07-19 21:19:20 +00:00
Paul Fox
b270315b21 applying fix for:
0000045: traceroute causes an alignment trap due to unaligned buffer on arm
2005-07-19 20:37:15 +00:00
Paul Fox
7b71d740b9 fix for "0000027: patch: nc will spin if stdin closed" 2005-07-18 22:23:16 +00:00
Ned Ludd
778ee6da60 - remove extra/unneeded function call. testing svn 2005-06-24 03:47:57 +00:00
Eric Andersen
3efa51d943 characters encoded as html should have a trailing semicolon
to be interpreted properly
2005-06-23 05:51:48 +00:00
Rob Landley
f3133c4149 Thus spake Brenda J. Butler:
We were seeing some timeouts when getting files with the busybox tftp
client.

With tcpdump, we saw that the tftp client was receiving blocks and
ack'ing them, but the server was failing to receive the occasional
ack.

When that happened, the server would send the last block over again,
but the tftp client was expecting the next block.

This patch allows the client to recover from this situation
(it sends an ack for the repeat block but does not write it
to the local file).

I hope it meets your approval, please don't hesitate to send
me comments for improvement.

The patch is against "head" in svn, I tested it on an older version
of busybox in our environment.  It applied cleanly to the older
version.

Credit for this goes to my co-worker John McCarthy for finding
it and me for fixing it (assuming it works for everyone else too).

cheerio,
bjb
2005-06-07 02:40:39 +00:00
Rob Landley
0b1ff5a606 Tobias Krawutschke found a bug where the DHCP client would accept packets
with the wrong ARP address, meaning we could easily get somebody else's IP.
That is a bad thing, and this is the minimal two-line fix.
2005-05-26 05:25:12 +00:00
Mike Frysinger
b662f0d58b import ether-wake applet by haveaniceday Bug 252 2005-05-11 03:59:53 +00:00
Rob Landley
00e76cb6b9 Patch from Jason Schoon to add IPV6 support to telnetd. Reworked by Rob
Landley to remove an #ifdef and move another one out of the flow of code.
2005-05-10 23:53:33 +00:00
Mike Frysinger
9c85ecdef4 use shared busybox error messages to save a few bytes 2005-05-07 06:45:29 +00:00
Mike Frysinger
7dc7f402a7 make the exec (-e) an optional feature of netcat 2005-05-06 05:00:34 +00:00
Mike Frysinger
60a5c38a4b In bug 247, haveaniceday writes:
The option "-w secs" adds a timeout for writing.
2005-05-06 04:45:38 +00:00
Rob Landley
918f2ab3d7 Revert the uptime() removal. Let the list sort it out... 2005-05-04 02:15:23 +00:00
Rob Landley
8b80c71d70 Patch from Shaun Jackman:
Replace uptime with time(NULL). time is more portable than uptime and
eliminates the need to define uptime, reducing code size slightly.
2005-05-04 00:38:15 +00:00
Rob Landley
0d38301d85 From: Shaun Jackman <sjackman@gmail.com>
To: busybox@mail.codepoet.org
  
Wrap sockaddr_in6 in a ifdef CONFIG_FEATURE_IPV6.
Include sys/types.h instead of asm/types.h.
Include netinet/if_ether.h instead of linux/if_ether.h
The ioctl request argument is an int, not an unsigned short.
2005-05-03 22:30:08 +00:00
Rob Landley
e3752e56a4 Revert Tito's patch to zcip. My bad, David Brownell had objected and I missed
it...
2005-05-03 03:28:55 +00:00
Rob Landley
8445a9ff99 On Tuesday 19 April 2005 21:10, Tito wrote and today added:
> Hi,
> this is a first attempt of size optimization for zcip taking into account all
> the hints given so far on the list.
> I've applied just the more obvious busyboxifications so maybe it could be
> optimized more.
BTW: I've ripped out  a lot of debug code and changed c++ // comments to /* */
as both were rather confusing for a newbie like me. ;-) 
Sorry to the author for that.
I know that this makes mantaining the code easier, but I'm simple minded....
2005-05-01 00:22:03 +00:00
Rob Landley
ad8071f582 David Brownell submitted a new applet, zcip, based on RFC 3927. This is
version 0418b.  It compiled.
2005-04-30 03:49:37 +00:00
Eric Andersen
70a5a1abde Do not attempt to free() the application's environment, which is was
not dynamically allocated.  Instead, use a private variable to store
the environment array, which is used when we exec applications.
2005-04-27 11:44:11 +00:00
Mike Frysinger
7202e00b4c remove unused variable and declare writepid inline 2005-04-23 01:42:29 +00:00
Mike Frysinger
91d8f0e892 touchups as suggested by Vladimir N. Oleynik 2005-04-18 18:52:15 +00:00
Mike Frysinger
fa69f110d9 import fakeidentd module started by Thomas Lundquist 2005-04-17 07:24:19 +00:00
Eric Andersen
14f5c8d764 Patch from Bernhard Fischer to make a bunch of symbols static
which were otherwise cluttering the global namespace.
2005-04-16 19:39:00 +00:00
Eric Andersen
63e5e7bf0e Fix broken macro 2005-04-16 08:04:31 +00:00
Eric Andersen
42e3b00ae5 Only define a local environ when not using the prototype from unistd.h 2005-04-16 08:02:15 +00:00
Mike Frysinger
4e5936ef95 In Bug 208, bernhardf writes:
On machines with only ANSI compliant compilers, not explitily delcaring
an empty parameter list 'void' causes failure.
2005-04-16 04:30:38 +00:00
Mike Frysinger
3cc01a80a3 In Bug 209, bernhardf writes:
struct named {
    named_field: init,
};
appear to be depraced by now; rather use C{99} format as in
struct named {
    .named_field = init,
};
2005-04-16 04:17:39 +00:00
Mike Frysinger
d824853de3 merge from udhcp module 2004-12-06 14:59:45 +00:00
Eric Andersen
9789bf1019 return failure when nslookup fails 2004-10-13 07:25:01 +00:00
Eric Andersen
abf58d6ba5 Wade Berrier writes:
Hello,

Here's a patch for a first attempt at static leases for udhcpd.
Included in the tarball are 2 files (static_leases.c, static_leases.h)
and a patch against the latest cvs.

In the config file you can configure static leases with the following
format:

static_lease 00:60:08:11:CE:4E 192.168.0.54
static_lease 00:60:08:11:CE:3E 192.168.0.44

Comments/suggestions/improvements are welcome.


Wade
2004-10-08 08:49:26 +00:00
Eric Andersen
751750e3ee Patch from Denis Vlasenko to fix a problem where
wget http://1.2.3.4/abc/ loses last '/'
2004-10-08 08:27:40 +00:00
Eric Andersen
07f2fea62c last_patch139.gz from Vladimir N. Oleynik:
>I also don't mean to disagree about leaving 30x status codes until after
>1.0.  In fact, although redirecting http://host/dir to http://host/dir/
>with a 301 is common practice (e.g. Apache, IIS), AFAIK it isn't
>actually required (or mentioned) by the HTTP specs.

Ok.
Attached patch have 302 and 408 implemented features.


--w
vodz
2004-10-08 08:03:29 +00:00
Eric Andersen
7daa076d3e egor duda writes:
Hi!

I've created a patch to busybox' build system to allow building it in
separate tree in a manner similar to kbuild from kernel version 2.6.

That is, one runs command like
'make O=/build/some/where/for/specific/target/and/options'
and everything is built in this exact directory, provided that it exists.

I understand that applyingc such invasive changes during 'release
candidates' stage of development is at best unwise. So, i'm currently
asking for comments about this patch, starting from whether such thing
is needed at all to whether it coded properly.

'make check' should work now, and one make creates Makefile in build
directory, so one can run 'make' in build directory after that.

One possible caveat is that if we build in some directory other than
source one, the source directory should be 'distclean'ed first.

egor
2004-10-08 07:46:08 +00:00
Eric Andersen
31ec93e580 Add some notes on how to make telnetd actually work 2004-09-23 20:08:46 +00:00
Glenn L McGrath
d4004ee6a9 Patch from Felipe Kellermann, remove some unnecessary dups, i declared a few extra const's also. 2004-09-14 17:24:59 +00:00
Eric Andersen
b225e2a76b Fixup some warnings 2004-08-28 00:43:07 +00:00
Eric Andersen
97a1de10e9 Vladimir N. Oleynik writes:
Ming-Ching,

>>No. Here there are no mistakes.
>>You using POST metod.
>>For get data you should read from stdin CONTENT_LENGTH bytes.

>Hower as I posted a little while ago, there is indeed a bug
>in POST method if the CONTENT_LENGTH is bigger
>than sizeof(wbuf[128]). So if your CGI script is expecting to
>read the full CONTENT_LENGTH, it might block forever,
>because it will only transfer sizeof(wbuf) to the CGI.

Ok, Ok. I should find time to understand with a problem.
Try attached patch.


--w
vodz
2004-08-26 22:22:50 +00:00
Glenn L McGrath
4014ab1c60 Set default command to list rather than get, its default behaviour now
coincides with upstream. Patch from debian diff.
2004-08-11 08:10:58 +00:00
Eric Andersen
15b588559b use SIGTERM to kill off udhcpd, not SIGKILL 2004-07-30 14:45:08 +00:00
Eric Andersen
373bc1eaee As noted by Eric Spakman, calling static_down() and then calling
bootp_down() seems redundant, esp since bootp_down was a subset
of static_down, so just use that...
2004-07-30 14:31:01 +00:00
Eric Andersen
7f8bcbefc7 add missing ; 2004-07-26 12:22:33 +00:00
Eric Andersen
b2a300590d bother. unrevert my fix. 2004-07-26 12:11:32 +00:00
Eric Andersen
ac594257c3 Make certain that udhcp shuts down the interface 2004-07-26 12:05:44 +00:00
Eric Andersen
29128cd412 oops 2004-07-26 11:46:50 +00:00
Eric Andersen
06e62fd5f0 Make certain that udhcp shuts down the interface 2004-07-26 11:45:25 +00:00
Glenn L McGrath
4d405bbc05 Patch from Manousaridis Angelos to bring dhclient down more elegently 2004-07-23 01:10:22 +00:00
Glenn L McGrath
0177ce1256 Patch from Mike Snitzer to fix return codes.
"I have a need to _really_ know if the interface was properly configured
via ifup so I made busybox's ifupdown pass the return codes through rather
than dropping them on the floor."

"All the functions in ifupdown.c return 1 on success and 0 on failure
(which happens to the opposite of standard practices but whatever).
So it is important for all these functions to not blindly return 1."

"The problem with blindly returning ret, even if it is != 1, is the
callers expect a 0 or 1 and accumulate the return codes.  So a function that
makes 3 calls to execute will have a value of 3 accumulated.  That value
of 1 (success) was almost always returned even if 1 of the commands in the
command sequence failed.  The attached patch fixes the lack of checking
to verify thar result == expected_reult."
2004-07-21 23:56:31 +00:00
Glenn L McGrath
469a1ead53 Patch from Mike Snitzer, bring down dhclient using its correct pid, fix
a grammatical error.
2004-07-21 12:21:39 +00:00
Eric Andersen
5e136f269b Prevent "bootp_down' was declared implicitly extern' and later `static'" warning 2004-07-20 06:35:54 +00:00
Eric Andersen
fe9b9cdfa5 Paul Fox writes:
hi --

working with ifupdown, i've found a couple of buglets --
the wrong string is passed to an error message.

paul
2004-06-29 00:48:30 +00:00
Eric Andersen
4872ed9737 Robin Farine writes:
Hi,

Package: BusyBox
Version: 1.0.0-pre10

When an incomplete read or write from/to a local file occurs (i.e.
not an EOF condition), the tftp client prematurely exits. This
problem can be reproduced by slowly piping data to the tftp client
like this:

  (for v in 1 2 3; do echo $v; sleep 1; done) | \
  tftp -p -l - -r output.txt <host>

The output file on the TFTP server will contain "1".

The attached patch provides a possible solution to this problem.

I can reproduce this on ARM sa1110 and ARM xscale boards, both
running Linux-2.6.4 & glibc-2.3.2. Thanks for the wonderful
program!

Robin
2004-06-22 10:18:30 +00:00
Eric Andersen
36adca81f5 Patch from Bastian Blank:
On Sat, Jun 19, 2004 at 10:57:37PM +0200, Bastian Blank wrote:
> The following patch changes klogd to use openlog/syslog themself
> instead of calling syslog_msg which always calls the triple
> openlog/syslog/closelog.

Updated patch: get rid of syslog_msg entirely. Request from Erik Andersen.

Bastian
2004-06-22 10:07:17 +00:00
Eric Andersen
78a5ddeff0 Robin Farine writes:
Package: BusyBox
Version: 1.0.0-pre10

Passing the -q <integer> option to inetd causes it to dereference an
invalid pointer (optarg). The attached patch provides a fix to this
problem.

Robin
2004-06-22 08:40:54 +00:00
Russ Dill
5c9323f4e6 use busybox sysinfo struct 2004-05-19 09:18:04 +00:00
Eric Andersen
28885c3f20 Fix a compile problem 2004-05-19 08:54:28 +00:00
Russ Dill
309c7b71e6 fix timewarp in client (server fix later) 2004-05-19 08:29:05 +00:00
Russ Dill
91e006c1ad remove uneccessary check (already done in pidfile.c) 2004-05-19 07:46:23 +00:00
Russ Dill
57f49d3185 fix memory leak caused by switch to vfork 2004-05-19 07:45:47 +00:00
Eric Andersen
6c8161d69f Steve Grubb writes:
Hello,

Last November a bug was found in iproute. CAN-2003-0856 has more information.
Basically, netlink packets can come from any user. If a program performs action
based on netlink packets, they must be examined to make sure they came from the
place they are expected (the kernel).

Attached is a patch against pre8. Please apply this before releasing 1.00 final.
All users of busy box may be vulnerable to local attacks without it.

Best Regards,
Steve Grubb
2004-05-05 07:05:32 +00:00
Glenn L McGrath
5ec58285c3 Fix size command, safe_strtoul gives and error if the \r is left in, the
RFC spec says the \r should be there.
This fix is the same as a recent wget fix
2004-05-04 10:43:34 +00:00
Eric Andersen
f71ad6c9e4 Thomas Koeller writes:
Hi,

    the following output is from BusyBox 1.0.0-pre10:

    ~ # ip link help
    ip: Command "help" is unknown, try "ip link help".

    tk

This patch fixes it by removing the advertisements for
the "ip blah help" stuff that is not implemented.
2004-04-26 19:32:49 +00:00
Glenn L McGrath
c6992feee3 Update my email address, document some of my tasks in the AUTHORS file 2004-04-25 05:11:19 +00:00
Eric Andersen
aff114c33d Larry Doolittle writes:
This is a bulk spelling fix patch against busybox-1.00-pre10.
If anyone gets a corrupted copy (and cares), let me know and
I will make alternate arrangements.

Erik - please apply.

Authors - please check that I didn't corrupt any meaning.

Package importers - see if any of these changes should be
passed to the upstream authors.

I glossed over lots of sloppy capitalizations, missing apostrophes,
mixed American/British spellings, and German-style compound words.

What is "pretect redefined for test" in cmdedit.c?

Good luck on the 1.00 release!

      - Larry
2004-04-14 17:51:38 +00:00
Eric Andersen
a4375047d3 slightly clean the whacked out formatting 2004-04-13 19:25:57 +00:00
Eric Andersen
238e354b58 Eric Spakman noticed that ifdown' will attempt to run 'ifconfig'
even if built with CONFIG_FEATURE_IFUPDOWN_IP when shutting down
a dhcp connection.
2004-04-12 20:57:17 +00:00
Glenn L McGrath
19efb3dc59 Fix compile error if CONFIG_FEATURE_IP_ADDR isnt enabled 2004-04-12 02:35:44 +00:00
Glenn L McGrath
36c7478992 Fix up conditional compile of files needed by ip applets 2004-04-12 02:22:39 +00:00
Glenn L McGrath
32da885a91 Fix ftp resume
Terminate returned message at <CRLF> so strtoul returns without error
2004-04-08 10:27:11 +00:00
Eric Andersen
7b5bb51f6a Fix indenting 2004-04-06 16:56:00 +00:00
Eric Andersen
c11a6a887b Patch from Thomas Winkler:
ifconfig did not look up hostnames, so
	ifconfig lo localhost
would not work, you have to do
	ifconfig lo 127.0.0.1
2004-03-31 11:30:08 +00:00
Eric Andersen
70060d25d2 s/fileno\(stdin\)/STDIN_FILENO/g
s/fileno\(stdout\)/STDOUT_FILENO/g
2004-03-27 10:02:48 +00:00
Manuel Novoa III
539fa95e0d Oops.. got a bit to aggressive with size optimization and global replace. :-( 2004-03-19 23:27:08 +00:00
Eric Andersen
ca65ca7d45 Oops. Using the wrong variable was a rather stupid
thing for me to do.
2004-03-15 08:46:37 +00:00
Eric Andersen
c7bda1ce65 Remove trailing whitespace. Update copyright to include 2004. 2004-03-15 08:29:22 +00:00
Manuel Novoa III
7d0c51919c In spite of the feature freeze, check in a complete rework of route which
fixes some bugs, adds some error checking, and removes _lots_ of bloat.
Text size on i386...
              old     new
   ipv6      5425    3523
   no ipv6   3143    2193
2004-03-10 07:42:38 +00:00
Eric Andersen
2479445562 Fix/eliminate use of atol 2004-03-06 22:11:45 +00:00
Glenn L McGrath
3f79300e37 Patch by Andrew Victor,
In arpping.h, fix structure alignment of "struct arpMsg".
GCC can insert padding in the structure which causes udhcpd to send an
invalid ARP packet on the network.  It will then not receive a valid
reply, which can cause it to assign an IP address that's already in use
on the network.
(With kernels before 2.4.20, the "struct ethhdr" in linux/if_ether.h
wasn't marked as packed.  This is also an issue if your toolchain was
built with a pre-2.4.20 kernel).
2004-03-05 14:25:49 +00:00
Glenn L McGrath
0226596dcb Fix a typo, patch by Andrew Victor 2004-03-05 14:23:16 +00:00
Glenn L McGrath
fbe984e1c9 Fix debugging output, patch by Hideki IWAMOTO 2004-03-05 13:04:39 +00:00
Glenn L McGrath
3d752f7ab2 Patch from Steven Scholz to fix compiler warnings 2004-03-05 09:38:16 +00:00
Glenn L McGrath
d5d5e54290 Quick fix for tftp truncation bug 2004-02-26 07:47:20 +00:00
Eric Andersen
d8746cdc40 Joe.C, joe at numa dot com dot tw writes:
Hi,

When downloading files over slow network (e.g. wireless/
internet) using IE, sometimes it will stop downloading and
show error message 'connection closed' when the download
is almost complete. This is because IE can't handle server
close connection properly.

Apache http_main.c fix this problem by close the connection
after client close the connection. This patch do exactly the
same thing. Please consider include this patch.

Joe.C
2004-02-24 07:28:38 +00:00
Eric Andersen
539ffc9129 Fernando Silveira writes:
Hi,

  Well, I made this patch a long time ago (08/2002) because it was a
  need of a project, but had no time to send it to you. It adds support
  to `autologin' option of the telnet protocol. It has been used since
  made with busybox 0.60.3 at production and I had no problems with it.
  I have ported it to the HEAD revision of the CVS server (20040211) and
  I hope you enjoy and apply it to the official sources. :)

Thanks a lot!
2004-02-22 12:25:47 +00:00
Glenn L McGrath
df7d84cf25 Patch from Vodz, cleanup memory usage, send strdup error messages to
syslog.
2004-02-22 11:25:13 +00:00
Glenn L McGrath
90ed9a0eb6 Patch from James Zhu, telnetd window resizing support. 2004-02-22 09:45:57 +00:00
Glenn L McGrath
d33278dea5 Patch from Hideki IWAMOTO, output debugging messages to stderr 2004-02-22 07:20:25 +00:00
Glenn L McGrath
34e1469f24 remove duplicate header declarations 2004-02-22 04:58:36 +00:00
Glenn L McGrath
c699778fbb Ptch by Hideki IWAMOTO, fix a bug preventing tftp from getting or
putting more than 0xffff blocks.
2004-02-22 03:33:53 +00:00
Glenn L McGrath
f1c4b11b24 No need to check proxy env variable twice, ignore proxy env variable if
its set to 0
2004-02-22 00:27:34 +00:00
Glenn L McGrath
03a0643fbc Dont use same variable and struct name 2004-02-18 13:19:58 +00:00
Glenn L McGrath
82d42dbb57 Formatting 2004-02-18 13:12:53 +00:00
Glenn L McGrath
aac2a19e50 remove debugging 2004-02-18 12:58:00 +00:00
Eric Andersen
37aac6489e Remove the unused CONFIG_FEATURE_HTTPD_SET_CGI_VARS_TO_ENV option. 2004-02-17 20:08:11 +00:00
Eric Andersen
60bb3f31af Mark Lord writes:
The config file processing for inetd in busybox-1.00-pre7 and newer
is broken -- the saved command argv[] values overwrite each other.

Patch to fix it is attached.

Cheers
--
Mark Lord
Real-Time Remedies Inc.
2004-02-17 20:04:34 +00:00
Eric Andersen
ef43749e83 Joe.C writes:
Hi,

   When httpd connection is closed, bosybox httpd will
not stop reading from CGI program. This patch fix this
problem. It check the return value of bb_full_write and
stop reading from CGI if the connection is closed.
Please apply this patch.

Joe.C
2004-02-04 11:10:28 +00:00
Glenn L McGrath
24cb17f9be Fix http proxy use, bytes were swapped 2004-01-31 08:08:57 +00:00
Eric Andersen
ad95373efc Use standard C99 types 2004-01-30 23:45:53 +00:00
Eric Andersen
1a834be1ce Use proper C99 types 2004-01-30 22:59:50 +00:00
Eric Andersen
39cdf4e2ab Use proper C99 types 2004-01-30 22:40:05 +00:00
Eric Andersen
f2ec37902a Pascal Brisset writes:
uuencode fails to encode binary data because it right-shifts
bytes as signed chars and keeps the duplicated sign bits.

The original base64_encode() from wget/http.c is broken as well,
but it is only used to encode ascii data.

-- Pascal
2004-01-26 07:17:30 +00:00
Glenn L McGrath
eaf5bc0038 Redo getconfigent, save 150 bytes, still small memory leak when
parsing invalid entries.
2004-01-20 15:32:39 +00:00
Glenn L McGrath
53766c4063 Fix up a couple of bugs i introduced in yesterdays cleanup. 2004-01-18 08:58:06 +00:00
Glenn L McGrath
58a2e0e262 Patch from Leif Lindholm (slightly modified by me), to fix http
redirection.
Example of incorrect behaviour was the following url, busybox wget didnt
get redirected to the busybox url as it should.
http://freshmeat.net/redir/busybox/953/url_homepage/www.busybox.net
2004-01-17 23:07:14 +00:00
Glenn L McGrath
036dbaa082 Modify bb_lookup_port to allow the protocol to be specified, allowing
/etc/services support for inetd, netcat and tftp.
2004-01-17 05:03:31 +00:00
Glenn L McGrath
a277e02663 The functions setconfig, enter and bump_nofile were only called once, marge them into the calling
function.
2004-01-17 03:20:46 +00:00
Glenn L McGrath
ff6ec8a2ae Use 1 line for function name and return value,
remove dofork define/variable,
dont check pid value is < or > than 0 if we know it is 0.
2004-01-17 02:47:45 +00:00
Glenn L McGrath
3e77b4e954 Remove some defined statements 2004-01-17 01:44:32 +00:00
Glenn L McGrath
c3b134f3b7 Changed #define names for common features (superficial) 2004-01-17 01:26:53 +00:00
Glenn L McGrath
2faf306c73 Use bb_get_chomped_line_from_file 2004-01-17 00:34:31 +00:00
Glenn L McGrath
f980bd5848 Fix a bug of mine, identified by Stephane Billiart 2003-12-27 00:21:47 +00:00
Russ Dill
6caa073760 it should work even if you don't assign a pidfile 2003-12-26 23:41:28 +00:00
Russ Dill
d242e49c89 fix a long standing underallocation bug 2003-12-24 19:57:13 +00:00
Russ Dill
a8992635b1 move debugging to safe place (before vfork) 2003-12-24 19:31:08 +00:00
Glenn L McGrath
236e93d133 Allow recieving file to stdout, sending files from stdin, use the '-'
filename. Save a variable.
2003-12-20 05:43:34 +00:00
Glenn L McGrath
266c1f5eff display the port number number correctly, other minor optimisations 2003-12-20 03:19:27 +00:00
Glenn L McGrath
ffccf6eb5d Change interface to bb_lookup_host, dont try and set port inside this
function as there is no gracefull way of handling failures.
Rename bb_getport to bb_lookup_port, allow a default port to be
specified so it always returns a correct value.
Modify ftpgetput/rdate/wget to use the new interface.
wget/rdate now use etc/services with a falback default value.
2003-12-20 01:47:18 +00:00
Glenn L McGrath
514aeabc36 Use getopt_ulflags 2003-12-19 12:08:56 +00:00
Eric Andersen
3752d337b3 Patch from Fillod Stephane:
* While I'm at it, there's also a "telnetd.patch" which maps CRLF to CR,
  like netkit-telnet does, required by the loosy Windows telnet clients.
2003-12-19 11:30:13 +00:00
Eric Andersen
769a3ef08d Patch from Stephane Billiart:
This removes references to config->remoteuser when
CONFIG_FEATURE_HTTPD_CGI=y but CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
2003-12-19 11:23:47 +00:00
Eric Andersen
1a773a656e Manousaridis Angelos writes:
Another issue I found was with the iproute utility. While using another
program I found that it failed because the "ip route del" command was
not found. I looked at the full iproute implementation and this command
exists. The busybox version has the "ip route delete" command. I have
created a patch which makes the "ip route del" command an alias to the
"ip route delete" command.
2003-12-19 10:47:40 +00:00
Eric Andersen
658f8b1d1a Manousaridis Angelos writes:
Hello,

I have been using busybox for some time now, for an ARM based platform.
I was very pleased when I tried the 1.00preX series, with all the new
utilities and daemons.

I found out that the ifupdown in busybox does not behave exaclty like
the debian version. Then the pre-up script fails, the interface is
getting up. Also when the post-up script fails the return value is
ignored. Actually everything is always run and the return value is
always true. I looked at the original implementation from debian and
fixed the busybox version to do the same. A patch is attached if anyone
is interested.
2003-12-19 10:46:00 +00:00
Eric Andersen
b8d2cd44a6 don't use kernel headers 2003-12-19 10:40:56 +00:00
Glenn L McGrath
b51eb26568 Use getopt_ulflags 2003-12-19 10:37:52 +00:00
Russ Dill
4e864a36b6 Finish remerging busybox udhcp and udhcp. Some cleanups as well. 2003-12-18 22:25:38 +00:00
Russ Dill
e30495654d clean up some bad, bad formatting 2003-12-16 22:46:33 +00:00
Russ Dill
76729b8c69 include headers with prototypes to make sure prototypes match 2003-12-16 20:44:15 +00:00
Eric Andersen
5f46f1c241 remove reference to missing header file which is breaking the build 2003-12-16 12:04:01 +00:00
Russ Dill
6b3f757053 revert removal of define 2003-12-16 02:38:09 +00:00
Russ Dill
4040d3d712 forgotten include 2003-12-16 02:34:28 +00:00
Russ Dill
8b3845106a why the complication of a static string rather than a define? gcc isn't dumb 2003-12-16 02:30:53 +00:00
Russ Dill
4b77acafa6 start attempting to bring udhcp in busybox back to the state where it is (ideally) an exact copy of udhcp outside of busybox so that its easy to merge back and forth 2003-12-16 02:28:20 +00:00
Russ Dill
7becf5987a when compiled standalone, udhcp needs these headers 2003-12-16 01:42:18 +00:00
Russ Dill
a3170d5aab whoops 2003-12-16 01:33:38 +00:00
Russ Dill
8f43126934 not sure who made this change, but it certainly mucks things up (note 'fwrite(leases, ...'), adds a bit more code, and some stack overhead. Anywho, this fixes it, and retains the spirit of what the submitter of this change was attempting to acheive (the entire lease is written at once in a struct) 2003-12-16 01:29:40 +00:00
Russ Dill
62419df95c make udhcp work under uclinux, to an extent 2003-12-15 22:11:26 +00:00
Russ Dill
4a9e34c148 options is a pretty common symbol, bad idea to use as a global in udhcp when compiling into busybox 2003-12-15 22:09:36 +00:00
Glenn L McGrath
9adcf73152 Stop sending data to the client after the first failure.
Patch by Joe.C
2003-12-08 20:21:53 +00:00
Glenn L McGrath
7ffe133864 As we no longer use function pointers for read in common archiving code
archive_xread can be replaced with bb_full_read, and archive_copy_file
with bb_copyfd*
bb_copyfd is split into two functions bb_copyfd_size and bb_copyfd_eof,
they share a common backend.
2003-11-21 22:24:57 +00:00
Eric Andersen
b6e58d2b9a Michael Smith writes:
I noticed a problem with ifconfig in busybox 0.60.5. The matching code
seems to exist in busybox CVS as well, so I'll paste in the patch that
fixed it.

I was running:
 # ifconfig wan0 1.2.3.4 pointopoint 1.2.3.5 netmask 255.255.255.255

I was seeing the inet addr and P-t-P addr both being set to 1.2.3.5
(the pointopoint address).

wan0      Link encap:Point-Point Protocol
          inet addr:1.2.3.5  P-t-P:1.2.3.5  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
          ...

The patch below seems to fix it.
2003-11-14 03:04:08 +00:00
Eric Andersen
c16686c1e2 Ulrich Marx writes:
hello

i had some trouble with the filedescriptor in udhcp.
Two things happened on my device:
1.) broken or not connected cable (no dhcp-server)
2.) daemonizing (starting with option -b)

i got a filedescriptor fd=0 from function raw_socket,
after daemonizing (daemon call) the fd is closed.
Client can't recieve data's anymore.

i fixed this problem (like pidfile handling):
2003-11-14 03:00:04 +00:00
Eric Andersen
04d055f4e1 Fix rdate and ftpget/ftpput so they compile with the new xconnect.
I have checked rdate.  Someone should also check ftpget/ftpput to
be sure they still work.
2003-11-03 21:20:18 +00:00
Eric Andersen
e6dc439b3a Rework wget, the xconnect interface, and its various clients
in order to fix the problems with round robin DNS reported
by Andrew Flegg:
    http://busybox.net/lists/busybox/2003-October/009579.html

This removes the ipv6 specific xconnect dns lookups.  I do
not see why that would need to be special cased for ipv6 as
was done, but that will just have to be tested.

So IPV6 people -- please test this change!

 -Erik
2003-10-31 09:31:46 +00:00
Eric Andersen
88c916bdec Andreas Mohr writes:
the busybox menuconfig triggered my "inacceptable number of spelling mistakes"
upper level, so I decided to make a patch ;-)

I also improved some wording to describe some things in a better way.

Many thanks for an incredible piece of software!

Andreas Mohr, random OSS developer
2003-10-22 09:58:56 +00:00
Glenn L McGrath
9d1a33c690 Vodz last_patch_105 without his xargs patch which doenst apply cleanly 2003-10-06 13:23:06 +00:00
Glenn L McGrath
1dc0ccafdd Vodz, last_patch_114
- env vars CONTENT_TYPE, CONTENT_LENGTH, HTTPD_REFERER, REMOTE_USER and
AUTH_TYPE(Basic always).
- POST data pipied now (previous version have loading into memory may be
big size data and reducing with hardcoded limit)
- removed $CGI_foo environment variables, else my have rubbish
enviroment if POST data have big binary file
2003-10-03 10:50:56 +00:00