The current standard (RFC 3542) is for IPV6_RECVPKTINFO to be given to
setsockopt, and IPV6_PKTINFO to be used as the packet type. Previously,
RFC 2292 required IPV6_PKTINFO to be used for both, but RFC 3542
re-purposed IPV6_PKTINFO when given to setsockopt. The special
Linux-specific IPV6_2292PKTINFO has the same semantics as IPV6_PKTINFO
in RFC 2292, but was introduced at the same time as IPV6_RECVPKTINFO.
Therefore, if we have IPV6_RECVPKTINFO available, we can use the RFC
3542 style, and if not, we assume that only the RFC 2292 API is
available, using IPV6_PKTINFO for both.
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bad case: send request to server1good.com; then try to resolve server2bad.com -
this fails, and failure takes ~5 secs; then receive server1's
response 5 seconds later. We'll never sync up in this case...
function old new delta
ntpd_main 1079 1106 +27
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
iproute.c: In function 'print_route':
iproute.c:85:9: error: 'RTA_TABLE' undeclared (first use in this function)
iproute.c:85:9: note: each undeclared identifier is reported only once for each function it appears in
iproute.c: In function 'iproute_modify':
iproute.c:467:36: error: 'RTA_TABLE' undeclared (first use in this function)
Fix it by partially #ifdef'ing the code added in b42107f215
Signed-off-by: Eugene Rudoy <gene.devel@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
With new code, we request that target IP (server ID) must be directly reachable.
If it's not, this happens:
udhcpc: waiting 2000 seconds
udhcpc: entering listen mode: kernel
udhcpc: opening listen socket on *:68 wlan0
udhcpc: entering renew state
udhcpc: sending renew to 1.1.1.1
udhcpc: send: Network is unreachable
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1.1.1.1 needs routing, this is fishy!
udhcpc: entering rebinding state
udhcpc: entering listen mode: raw
udhcpc: created raw socket
udhcpc: sending renew to 0.0.0.0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ going to use broadcast
which is the desired behavior. Before the patch, packet to 1.1.1.1 was routed
over eth0 (!) and maybe even into Internet (!!!).
function old new delta
udhcpc_main 2752 2763 +11
udhcp_send_kernel_packet 295 301 +6
send_renew 82 84 +2
send_packet 166 168 +2
bcast_or_ucast 23 25 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/0 up/down: 23/0) Total: 23 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
I see random field values like sll_hatype=0x267 when I strace.
They seem to not matter, but just in case they sometimes do,
let's at least have deterministic values (via memset(0)).
function old new delta
change_listen_mode 308 322 +14
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
FEATURE_GETOPT_LONG made dependent on LONG_OPTS.
The folloving options are removed, now LONG_OPTS enables long options
for affected applets:
FEATURE_ENV_LONG_OPTIONS FEATURE_EXPAND_LONG_OPTIONS
FEATURE_UNEXPAND_LONG_OPTIONS FEATURE_MKDIR_LONG_OPTIONS
FEATURE_MV_LONG_OPTIONS FEATURE_RMDIR_LONG_OPTIONS
FEATURE_ADDGROUP_LONG_OPTIONS FEATURE_ADDUSER_LONG_OPTIONS
FEATURE_HWCLOCK_LONG_OPTIONS FEATURE_NSENTER_LONG_OPTS
FEATURE_CHCON_LONG_OPTIONS FEATURE_RUNCON_LONG_OPTIONS
They either had a small number of long options, or their long options are
essential.
Example: upstream addgroup and adduser have ONLY longopts,
we should probably go further and get rid
of non-standard short options.
To this end, make addgroup and adduser "select LONG_OPTS".
We had this breakage caused by us even in our own package!
#if ENABLE_LONG_OPTS || !ENABLE_ADDGROUP
/* We try to use --gid, not -g, because "standard" addgroup
* has no short option -g, it has only long --gid.
*/
argv[1] = (char*)"--gid";
#else
/* Breaks if system in fact does NOT use busybox addgroup */
argv[1] = (char*)"-g";
#endif
xargs: its lone longopt no longer depends on DESKTOP, only on LONG_OPTS.
hwclock TODO: get rid of incompatible -t, -l aliases to --systz, --localtime
Shorten help texts by omitting long option when short opt alternative exists.
Reduction of size comes from the fact that store of an immediate
(an address of longopts) to a fixed address (global variable)
is a longer insn than pushing that immediate or passing it in a register.
This effect is CPU-agnostic.
function old new delta
getopt32 1350 22 -1328
vgetopt32 - 1318 +1318
getopt32long - 24 +24
tftpd_main 562 567 +5
scan_recursive 376 380 +4
collect_cpu 545 546 +1
date_main 1096 1095 -1
hostname_main 262 259 -3
uname_main 259 255 -4
setpriv_main 362 358 -4
rmdir_main 191 187 -4
mv_main 562 558 -4
ipcalc_main 548 544 -4
ifenslave_main 641 637 -4
gzip_main 192 188 -4
gunzip_main 77 73 -4
fsfreeze_main 81 77 -4
flock_main 318 314 -4
deluser_main 337 333 -4
cp_main 374 370 -4
chown_main 175 171 -4
applet_long_options 4 - -4
xargs_main 894 889 -5
wget_main 2540 2535 -5
udhcpc_main 2767 2762 -5
touch_main 436 431 -5
tar_main 1014 1009 -5
start_stop_daemon_main 1033 1028 -5
sed_main 682 677 -5
script_main 1082 1077 -5
run_parts_main 330 325 -5
rtcwake_main 459 454 -5
od_main 2169 2164 -5
nl_main 201 196 -5
modprobe_main 773 768 -5
mkdir_main 160 155 -5
ls_main 568 563 -5
install_main 773 768 -5
hwclock_main 411 406 -5
getopt_main 622 617 -5
fstrim_main 256 251 -5
env_main 198 193 -5
dumpleases_main 635 630 -5
dpkg_main 3991 3986 -5
diff_main 1355 1350 -5
cryptpw_main 233 228 -5
cpio_main 593 588 -5
conspy_main 1135 1130 -5
chpasswd_main 313 308 -5
adduser_main 887 882 -5
addgroup_main 416 411 -5
ftpgetput_main 351 345 -6
get_terminal_width_height 242 234 -8
expand_main 690 680 -10
static.expand_longopts 18 - -18
static.unexpand_longopts 27 - -27
mkdir_longopts 28 - -28
env_longopts 30 - -30
static.ifenslave_longopts 34 - -34
mv_longopts 46 - -46
static.rmdir_longopts 48 - -48
packed_usage 31739 31687 -52
------------------------------------------------------------------------------
(add/remove: 2/8 grow/shrink: 3/49 up/down: 1352/-1840) Total: -488 bytes
text data bss dec hex filename
915681 485 6880 923046 e15a6 busybox_old
915428 485 6876 922789 e14a5 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Move first two messages to log2 level:
08:46:32.23824 udhcpc: opening raw socket on ifindex 2
08:46:32.23825 udhcpc: got raw socket fd
08:46:32.26354 udhcpc: created raw socket
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Basedon patch by Bernd Holzmüller <bernd.holzmueller@tiggerswelt.net>
function old new delta
option_to_env 504 580 +76
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This patch adds filtering by and printing of 'scope' to the
ip route command, taken from the upstream ip command.
x86_64:
function old new delta
iproute_list_or_flush 1548 1674 +126
print_route 2394 2469 +75
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 201/0) Total: 201 bytes
mipsel:
iproute_list_or_flush 1952 2096 +144
print_route 2580 2696 +116
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 2/0 up/down: 260/0) Total: 260 bytes
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Patch is based on work by tiggerswelt.net. They say:
"
We wanted udhcpc6 to release its IPv6-Addresses on
quit (-R-commandline-option) which turned out to generate once again
kind of garbage on the network-link.
We tracked this down to two issues:
- udhcpc6 uses a variable called "srv6_buf" to send packets to
the dhcp6-server, but this variable is never initialized correctly
and contained kind of a garbage-address
- The address of the dhcp6-server is usually a link-local-address,
that requires an interface-index when using connect() on an AF_INET6-
socket
We added an
additional parameter for ifindex to d6_send_kernel_packet() and made
d6_recv_raw_packet() to capture the address of the dhcp6-server and
forward it to its callee.
"
Three last patches together:
function old new delta
d6_read_interface - 454 +454
d6_recv_raw_packet - 283 +283
option_to_env 249 504 +255
.rodata 165226 165371 +145
send_d6_discover 195 237 +42
send_d6_select 118 159 +41
send_d6_renew 173 186 +13
send_d6_release 162 173 +11
opt_req - 10 +10
d6_send_kernel_packet 304 312 +8
opt_fqdn_req - 6 +6
d6_mcast_from_client_config_ifindex 48 51 +3
d6_find_option 63 61 -2
udhcpc6_main 2416 2411 -5
static.d6_recv_raw_packet 266 - -266
------------------------------------------------------------------------------
(add/remove: 5/1 grow/shrink: 8/2 up/down: 1271/-273) Total: 998 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Patch is based on work by tiggerswelt.net. They say:
"
But when we tried to use dnsmasq on server-side, udhcpc6 was unable to
forward the acquired address to its setup-script although the
IPv6-Address had been assigned by the server as we could see via
tcpdump. We traced this issue down to a problem on how udhcpc6 parses
DHCPv6-Options: When moving to next option, a pointer-address is
increased and a length buffer is decreased by the length of the option.
The problem is that it is done in this order:
option += 4 + option[3];
len_m4 -= 4 + option[3];
But this has to be switched as the length is decreased by the length of
the *next* option, not the current one. This affected both - internal
checks if a required option is present and the function to expose
options to the environment of the setup-script.
There was also a bug parsing D6_OPT_STATUS_CODE Options, that made
dnsmasq not work as udhcpc6 thought it is receiving a non-positive
status-code (because it did not parse the status-code as required in RFC
3315).
In addition we introduced basic support for RFC 3646 (OPTION_DNS_SERVERS
and OPTION_DOMAIN_LIST) and RFC 4704 (OPTION_CLIENT_FQDN).
"
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Patch is based on work by tiggerswelt.net. They say:
"Using this patch it was no problem to acquire an IPv6-Address via DHCPv6
using ISC DHCPD6 on server-side."
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
We were strdup'ing "Cookie: foo" every time we saw it.
function old new delta
handle_incoming_and_exit 2733 2821 +88
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Anonymous ftpd login is useful even when ftpd authentication feature
is enabled. Anonymous logins provide simple password-less connection
for FTP clients.
To allow password-less connection user command line option '-a USER' is
added. This option specifies the system user to use when
'anonymous' username is given in USER command. No password is required
in this case.
function old new delta
ftpd_main 2164 2232 +68
packed_usage 31015 31046 +31
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 99/0) Total: 99 bytes
Signed-off-by: Andrey Mozzhuhin <amozzhuhin@yandex.ru>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Good news that TLS_RSA_WITH_AES_256_CBC_SHA256 still works with new code ;)
This change adds inevitable extension to have different sized hashes and AES key sizes.
In libbb, md5_end() and shaX_end() are extended to return result size instead of void -
this helps *a lot* in tls (the cost is ~5 bytes per _end() function).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Hoped this can make cdn.kernel.org to like us more. Nope.
While at it, made error reporting more useful.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
A new applet, ssl_client, is the TLS debug thing now.
It doubles as wget's NOMMU helper.
In MMU mode, wget still forks, but then directly calls TLS code,
without execing.
This can also be applied to sendmail/popmail (SMTPS / SMTP+starttls support)
and nc --ssl (ncat, nmap's nc clone, has such option).
function old new delta
tls_handshake - 1691 +1691
tls_run_copy_loop - 443 +443
ssl_client_main - 128 +128
packed_usage 30978 31007 +29
wget_main 2508 2535 +27
applet_names 2553 2560 +7
...
xwrite_encrypted 360 342 -18
tls_main 2127 - -2127
------------------------------------------------------------------------------
(add/remove: 4/1 grow/shrink: 13/8 up/down: 2351/-2195) Total: 156 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Was:
Usage: ip [OPTIONS] address|route|link|tunnel|neigh|rule [COMMAND]
ip [OPTIONS] OBJECT [COMMAND]
where OBJECT := address|route|link|tunnel|neigh|rule
OPTIONS := -f[amily] inet|inet6|link | -o[neline]
User: instead of repeating list of OBJECTs twice, you could at least
show available COMMANDs...
Now:
Usage: ip [OPTIONS] address|route|link|tunnel|neigh|rule [COMMAND]
OPTIONS := -f[amily] inet|inet6|link | -o[neline]
COMMAND :=
ip addr add|del IFADDR dev IFACE | show|flush [dev IFACE] [to PREFIX]
ip route list|flush|add|del|change|append|replace|test ROUTE
ip link set IFACE [up|down] [arp on|off] | show [IFACE]
ip tunnel add|change|del|show [NAME]
[mode ipip|gre|sit]
[remote ADDR] [local ADDR] [ttl TTL]
ip neigh show|flush [to PREFIX] [dev DEV] [nud STATE]
ip rule [list] | add|del SELECTOR ACTION
While at it, tweak tc --help too (it stays disabled, thus no effect)
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
As it turns out, it goes only up to "inbuf_size:4608"
for kernel.org - fixed 18kb buffer was x4 larger than necessary.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
With tls_has_buffered_record(), entire kernel.org response
is printed at once, without 6 second pause to see its delayed EOF.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
For the first time
printf "GET / HTTP/1.1\r\nHost: kernel.org\r\n\r\n" | ./busybox tls kernel.org
successfully reads entire server response and TLS shutdown.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This is particularly useful if hostname resolution is triggered by
host non-reachability: I saw this in real-life, without the message
it is not at all obvious that IP that we use for a specific host
has changed.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Successfully finishes handshake with test servers using NULL-SHA256
cipher.
The "only" thing remaining before there is a chance
this can actually work with real servers is AES encrypt/decrypt.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
$ ./busybox tls kernel.org
insize:0 tail:0
got block len:74
got HANDSHAKE
got SERVER_HELLO
insize:79 tail:4406
got block len:4392
got HANDSHAKE
got CERTIFICATE
entered der @0x8f7e723:0x30 len:1452 inner_byte @0x8f7e727:0x30
entered der @0x8f7e727:0x30 len:1172 inner_byte @0x8f7e72b:0xa0
skipped der 0xa0, next byte 0x02
skipped der 0x02, next byte 0x30
skipped der 0x30, next byte 0x30
skipped der 0x30, next byte 0x30
skipped der 0x30, next byte 0x30
skipped der 0x30, next byte 0x30
entered der @0x8f7e830:0x30 len:418 inner_byte @0x8f7e834:0x30
skipped der 0x30, next byte 0x03
entered der @0x8f7e843:0x03 len:399 inner_byte @0x8f7e847:0x00
copying key bytes:399, first:0x00
insize:4397 tail:9
got block len:4
got SERVER_HELLO_DONE
Now need to teach it to send ClientKeyExchange...
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
write(3, "GET / HTTP/1.1\r\nUser-Agent: Wget\r\nConnection: close\r\n\r\n", 74) = 74
shutdown(3, SHUT_WR) = 0
alarm(900) = 900
read(3, "", 1024) = 0
write(2, "wget: error getting response\n", 29) = 29
exit(1)
The peer simply does not return anything. It closes its connection.
Probably it detects wget closing its writing end: shutdown(3, SHUT_WR).
The point it, closing write side of the socket is _valid_ for HTTP.
wget sent the full request, it won't be sending anything more:
it will only receive the response, and that's it.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Redundant help texts (one which only repeats the description)
are deleted.
Descriptions and help texts are trimmed.
Some config options are moved, even across menus.
No config option _names_ are changed.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When httpd proxies a request to another server, it first creates
an AF_INET socket, then resolves the server name to a sockaddr,
then connects to it. This fails if the server name resolves to
an IPv6 address.
This patch ensures that the socket is created with the correct
address family (AF_INET6 if the server resolves to an IPv6 address
and AF_INET otherwise).
Signed-off-by: Laurent Bercot <ska-dietlibc@skarnet.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Run the namelookup from the main loop so a misspelled first ntp server
name does not block everything forever.
This fixes the following situation which would block forever:
$ sudo ./busybox ntpd -dn -p foobar -p pool.ntp.org
ntpd: bad address 'foobar'
ntpd: bad address 'foobar'
ntpd: bad address 'foobar'
...
New behavior:
ntpd: bad address 'foobar'
ntpd: sending query to 137.190.2.4
ntpd: reply from 137.190.2.4: offset:-1.009775 delay:0.175550 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x01
ntpd: sending query to 137.190.2.4
ntpd: reply from 137.190.2.4: offset:-1.009605 delay:0.175461 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x03
ntpd: sending query to 137.190.2.4
ntpd: reply from 137.190.2.4: offset:-1.005327 delay:0.167027 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x07
ntpd: sending query to 137.190.2.4
ntpd: bad address 'foobar'
ntpd: reply from 137.190.2.4: offset:-1.046349 delay:0.248705 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x0f
This patch is based on Kaarle Ritvanens work.
http://lists.busybox.net/pipermail/busybox/2016-May/084197.html
function old new delta
ntpd_main 1061 1079 +18
ntp_init 556 560 +4
resolve_peer_hostname 81 75 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 22/-6) Total: 16 bytes
Signed-off-by: Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
All other applets are listed simply by their name, no reason why
dumpleases doesn't do that.
Group all udhcpd feature options directly after it.
Put "NOT READY" into udhcpc6 item (some users actually tried to use it,
and complained).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit a8c696bf09 makes ifup and ifdown
individually selectable, but forgets to update the dependency to
IFUPDOWN_UDHCPC_CMD_OPTIONS, so it is not selectable anymore.
This patch fixes the dependency by checking for IFUP or IFDOWN, instead
of the obsolete IFUPDOWN.
Also, it drops dependency on UDHCPC: udhcpc on the target system
does not have to come from the _same_ binary.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
musl does not like including linux/netfilter_ipv4.h
(enum / #define collision in two headers, resulting in "3 = 3"
type situation in enum definition).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
They merely enable ip or ifconfig/route. There is already a way to do this
on the same menuconfig page.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Linux kernel, starting from 2.6.19 allows ip table ids to have 32-bit values.
In order to preserve compatibility, the old 8-bit field: rtm_table is still
in use when table id is lower than 256.
Add support for the 32-bit table id (RTA_TABLE attribute) in:
- ip route print
- ip route modify
- ip rule print
- ip rule modify
Add printing of table ids to ip route.
Changes are compatible with the mainline iproute2 utilities.
These changes are required for compatibility with ConnMan, which by default
uses table ids greater than 255.
function old new delta
print_route 1588 1637 +49
do_iproute 2187 2222 +35
do_iprule 955 987 +32
print_rule 617 630 +13
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/0 up/down: 129/0) Total: 129 bytes
Signed-off-by: Lukasz Nowak <lnowak@tycoint.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
While at it, fix a pathological case where it is not fine:
-r REALM with some 8-kbyte long REALM would overflow the buffer.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
function old new delta
udhcp_get_option 215 220 +5
udhcp_run_script 802 803 +1
Signed-off-by: Brian Foley <bpfoley@google.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Here, not handling the error is would just eat one input 0xff char.
Correct handling would need even more corner case handling,
as-is buggy handling corrupts the buffer.
Since we just been told by kernel that pty is ready,
EAGAIN should not be happening here anyway.
function old new delta
telnetd_main 1798 1785 -13
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
put_iac2(w,c) is mostly used with constants, fold them into one arg
function old new delta
put_iac2_merged - 46 +46
telnet_main 1603 1583 -20
con_escape 285 257 -28
put_iac2 50 - -50
------------------------------------------------------------------------------
(add/remove: 1/1 grow/shrink: 0/2 up/down: 46/-98) Total: -52 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
A bit of future-proofing. Some of them can stand just being ignored.
function old new delta
telnetd_main 1791 1798 +7
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
I managed to reproduce the bug, with some difficulty.
function old new delta
telnetd_main 1780 1791 +11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If a write to pty is short, remove_iacs() can be run on a buffer repeatedly.
This, for example, can eat 0xff chars (IACs, in telnet terms).
Rework the logic to handle IACs in a special "write to pty" function.
function old new delta
telnetd_main 1662 1750 +88
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
By user's request.
Decided to not use fcntl(F_SETLKW) in lieu of problems with locking
on networked filesystems. The existence of /var/run/ifstate.new
is treated as a write lock. rename() provides atomicity.
function old new delta
ifupdown_main 1019 1122 +103
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Also, much improved help text.
function old new delta
packed_usage 30652 30851 +199
tcpudpsvd_main 1782 1784 +2
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Added NOINLINE to two function, since my version of gcc would actualy increase
code size otherwise.
I see no size changes.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Remove FEATURE_TRACEROUTE_SOURCE_ROUTE: it's off by default, and
source routing is not used in real world.
Tested that "traceroute -n ::1 100" and "traceroute -n 127.0.0.1 100"
both send 100 byte IP packets (this matches what traceroute on Fedora
Rawhide is doing).
function old new delta
common_traceroute_main 3731 3738 +7
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
User report:
or our board we setup eth0:0 on a 10.10.10.x/29 netwrok.
The problem is ip addr flush dev eth0:0 removes all ip addresses from
eth0. You can see this if you run
ip -stat -stat addr flush dev eth0:0
2: eth0 inet 172.27.105.10/22 brd 172.27.107.255 scope global eth0
valid_lft forever preferred_lft forever
2: eth0 inet 10.10.10.9/29 scope global eth0:0
valid_lft forever preferred_lft forever
2: eth0 inet6 fe80::a2f6:fdff:fe18:2b13/64 scope link
valid_lft forever preferred_lft forever
*** Round 1, deleting 3 addresses ***
*** Flush is complete after 1 round ***
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
A padding to align a message should not only be added between
different attributes of a netlink message, but also at the end of the
message to pad it to the correct size.
Without this patch the following command does not work and returns an
error code:
ip link add type nlmon
Without this ip from busybox sends this:
sendmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000},
msg_namelen=12, msg_iov=[{iov_base={{len=45, ...},
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\20\0\22\0\t\0\1nlmon"}, iov_len=45}],
msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 45
return value: 2
The normal ip utile from iproute2 sends this:
sendmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000},
msg_namelen=12, msg_iov=[{iov_base={{len=48, ...},
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\20\0\22\0\t\0\1nlmon\0\0\0"}, iov_len=48}],
msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 48
return value: 0
With this patch ip from busybox sends this:
sendmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000},
msg_namelen=12, msg_iov=[{iov_base={{len=48, ...},
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\20\0\22\0\t\0\1nlmon\0\0\0"}, iov_len=48}],
msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 48
return value: 0
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
