The command 'nl -b n' should output no line numbers, just some
spaces as a placeholder followed by the actual file content.
Add tests for line numbering by cat and nl. The correct results
were obtained from coreutils.
function old new delta
print_numbered_lines 152 157 +5
.rodata 182456 182453 -3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 5/-3) Total: 2 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
<sys/sysmacros.h> is linux-only
FreeBSD defines makedev in sys/types.h already included in the libbb.h.
Signed-off-by: Alex Samorukov <samm@os2.kiev.ua>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If we have a square, the speedup can be extremely large
(in best case example below, it's ~40000 times faster):
$ time ./busybox_old factor 18446743988964486098
18446743988964486098: 2 3037000493 3037000493
real 0m4.246s
$ time ./busybox factor 18446743988964486098
18446743988964486098: 2 3037000493 3037000493
real 0m0.000s
function old new delta
isqrt_odd - 57 +57
print_w - 36 +36
factorize 218 236 +18
print_h - 7 +7
factorize_numstr 65 72 +7
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 2/0 up/down: 125/0) Total: 125 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
PLATFORM_LINUX is a hidden configuration option which is disabled by
default and enabled at over a hundred locations for features that are
deemed to be Linux specific.
The only effect of PLATFORM_LINUX is to control compilation of
libbb/match_fstype.c. This file is only needed by mount and umount.
Remove all references to PLATFORM_LINUX and compile match_fstype.c
if mount or umount is enabled.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Prior to the patch, both -f and --first-only are in all cases either
no-op or ignored.
Without --tabs, --first-only is the default so specifying it is a no-op.
With --tabs, --all is implied, and --first-only is intended to reset this.
function old new delta
expand_main 690 694 +4
Signed-off-by: Mark Edgar <medgar123@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
stime() has been deprecated in glibc 2.31 and replaced with
clock_settime(). Let's replace the stime() function calls with
clock_settime() in preperation.
function old new delta
rdate_main 197 224 +27
clock_settime - 27 +27
date_main 926 941 +15
stime 37 - -37
------------------------------------------------------------------------------
(add/remove: 2/2 grow/shrink: 2/0 up/down: 69/-37) Total: 32 bytes
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When IF_DESKTOP is not defined, chown and chgrp only takes option -R -h,
However the usage output of chgrp is wrong:
$ ./busybox.nosuid chown
Usage: chown [-Rh]... USER[:[GRP]] FILE...
$ ./busybox.nosuid chgrp
Usage: chgrp [-RhLHP]... GROUP FILE...
$ ./busybox.nosuid chgrp -H group dummy
chgrp: invalid option -- 'H'
Usage: chgrp [-RhLHP]... GROUP FILE...
The chgrp is now a wrapper of chown, so the recognized options shall be the same.
This is introduced by 34425389e0
I would expect the correct behavior shall be the same as chown.
So suggest the below patch, the behavior shall be:
$ ./busybox.nosuid chgrp
Usage: chgrp [-Rh]... GROUP FILE...
Signed-off-by: Shuang Liu <sliu@de.adit-jv.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some 32-bit architectures no longer have the 32-bit time_t syscalls.
Instead they have suffixed syscalls that returns a 64-bit time_t. If
the architecture doesn't have the non-suffixed syscall and is using a
64-bit time_t let's use the suffixed syscall instead.
This fixes build issues when building for RISC-V 32-bit with 5.1+ kernel
headers.
If an architecture only supports the suffixed syscalls, but is still
using a 32-bit time_t fall back to the libc call.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
GNU tee does this only with -p, which we don't have yet.
function old new delta
tee_main 306 295 -11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Back in 2007, commit 0c97c9d437 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().
This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.
Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.
This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.
The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):
Arm: -92 bytes
MIPS: -52 bytes
PPC: -1836 bytes
x86_64: -938 bytes
Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
$ dd bs=1G <sda1 of=/dev/sda1
dd: error writing '/dev/sda1': No space left on device
1+0 records in
0+0 records out
999292928 bytes (953.0MB) copied, 0.784617 seconds, 1.2GB/s
function old new delta
write_and_stats 99 102 +3
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
With FEATURE_SYNC_FANCY not set:
function old new delta
fsync_main 130 123 -7
With FEATURE_SYNC_FANCY set, should be much larger code size savings.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
sync: add O_NOCTTY
fsync: drop O_NOATIME, add O_NONBLOCK, set exitcode to 1 if fsync() fails,
update --help message to be similar to sync.
both: reformat code to minimize "diff -u sync.c fsync.c":
in particular, they use same open() flags now
function old new delta
fsync_main 126 130 +4
packed_usage 33316 33317 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 5/0) Total: 5 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Thanks to Cristian Ionescu-Idbohrn for noticing.
Also fix "%d" ' 42' to skip leading whitespace.
function old new delta
print_direc 435 454 +19
bb_strtoll 99 103 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 23/0) Total: 23 bytes
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Kconfig-language.txt was deleted in commit 4fa499a17b back in 2006.
Move to docs/ as suggested by Xabier Oneca:
http://lists.busybox.net/pipermail/busybox/2014-May/080914.html
Also update references to it everywhere.
Signed-off-by: Kartik Agaram <akkartik@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
On sorting all kernel/linux/arch/ *.[ch] files,
this reduces memory usage by 6%.
yes | head -99999999 | sort
goes down from 1900Mb to 380 Mb.
function old new delta
sort_main 862 1098 +236
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This also makes OPT_STR reused:
text data bss dec hex filename
930979 481 6852 938312 e5148 busybox_old
930954 481 6852 938287 e512f busybox_unstripped
^^^^^^
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
the patch getopt32: remove opt_complementary 22542eca18
introduced a regressed in the cp command since it removed all aliases of arguments
if long_opts is not configured.
Patch by Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Implement "cp -T". Some Linux kernel Makefiles started using this recently,
so allow also building on systems using busybox cp.
function old new delta
cp_main 360 428 +68
copy_file 1678 1676 -2
packed_usage 32290 32259 -31
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/2 up/down: 76/-39) Total: 35 bytes
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Adds a fullblock iflag for improved compatibility with GNU dd.
The new iflag can be used to ensure that dd calls retrieve the
expected amount of data when reading from pipes or unusual
filesystems.
function old new delta
packed_usage 32249 32334 +85
dd_main 1582 1632 +50
static.iflag_words 12 22 +10
------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 145/0) Total: 145 bytes
Signed-off-by: Nicholas Clark <nicholas.clark@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
$ busybox dd if=/dev/zero of=/dev/loop0 bs=100M count=8; echo $?
8+0 records in
7+0 records out <=========== FIXED, was 7+1
805220352 bytes (767.9MB) copied, 0.464010 seconds, 1.6GB/s
1
function old new delta
write_and_stats 97 99 +2
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The -u option is supposed to be allowed to appear multiple times; the
option string supplied to getopt32long requires it to be followed by a
nonnegative integer.
Reported-by: Keith Maxwell <keith.maxwell@gmail.com>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
