> The following patch adds support for the -S and -b flags to `ln'. These
> flags [especially -b] are used extensively in Debian pre and post
> installation scripts.
Comments from Vladimir Oleynik influenced the final patch, and I also ripped
out the in-file changelog since it belongs here. At the time, it said:
/* Apr 15, 2004 Matthew S. Wood (mwood@realmsys.com)
*
* Implement '-b' (backup) flag.
* Implement '-S' (backup suffix) flag.
*
*
* Mar 16, 2003 Manuel Novoa III (mjn3@codepoet.org)
*
* Fixed bug involving -n option. Essentially, -n was always in effect.
*/
Hi!
I've created a patch to busybox' build system to allow building it in
separate tree in a manner similar to kbuild from kernel version 2.6.
That is, one runs command like
'make O=/build/some/where/for/specific/target/and/options'
and everything is built in this exact directory, provided that it exists.
I understand that applyingc such invasive changes during 'release
candidates' stage of development is at best unwise. So, i'm currently
asking for comments about this patch, starting from whether such thing
is needed at all to whether it coded properly.
'make check' should work now, and one make creates Makefile in build
directory, so one can run 'make' in build directory after that.
One possible caveat is that if we build in some directory other than
source one, the source directory should be 'distclean'ed first.
egor
Hi Erik,
Hi to all,
This is part five of the my_get*id story.
I've tweaked a bit this two functions to make them more flexible,
but this changes will not affect existing code.
Now they work so:
1) my_getpwuid( char *user, uid_t uid, int bufsize)
if bufsize is > 0 char *user cannot be set to NULL
on success username is written on static allocated buffer
on failure uid as string is written to buffer and NULL is returned
if bufsize is = 0 char *user can be set to NULL
on success username is returned
on failure NULL is returned
if bufsize is < 0 char *user can be set to NULL
on success username is returned
on failure an error message is printed and the program exits
2) 1) my_getgrgid( char *group, uid_t uid, int bufsize)
if bufsize is > 0 char *group cannot be set to NULL
on success groupname is written on static allocated buffer
on failure gid as string is written to buffer and NULL is returned
if bufsize is = 0 char *group can be set to NULL
on success groupname is returned
on failure NULL is returned
if bufsize is < 0 char *group can be set to nULL
on success groupname is returned
on failure an error message is printed and the program exits
This changes were needed mainly for my new id applet.
It is somewhat bigger then the previous but matches the behaviour of GNU id
and is capable to handle usernames of whatever length.
BTW: at a first look it seems to me that it will integrate well (with just a few changes)
with the pending patch in patches/id_groups_alias.patch.
The increase in size is balanced by the removal of my_getpwnamegid.c
from libbb as this was used only in previous id applet and by size optimizations
made possible in whoami.c and in passwd.c.
I know that we are in feature freeze but I think that i've tested it enough
(at least I hope so.......).
Hi,
I've fixed also the issue of whoami cutting down usernames.
This time I cannot send a diff because i don't know if my previous patches will be applied
or not, so I send in the whole file.
The changes I've made don't affect size but ensure that usernames of whatever lenght
are correctly displayed.
root@localhost:/dev/pts/3:/root/Desktop/busybox/coreutils# size whoami_orig.o
text data bss dec hex filename
102 0 0 102 66 whoami_orig.o
root@localhost:/dev/pts/3:/root/Desktop/busybox/coreutils# size whoami.o
text data bss dec hex filename
93 0 0 93 5d whoami.o
This should be applied even if the other patches aren't as this matches the behaviour of the GNU whoami.
Thanks in advance,
Ciao,
Tito
Hi,
I've spent the half night staring at the devilish my_getpwuid and my_getgrgid functions
trying to find out a way to avoid actual and future potential buffer overflow problems
without breaking existing code.
Finally I've found a not intrusive way to do this that surely doesn't break existing code
and fixes a couple of problems too.
The attached patch:
1) changes the behaviour of my_getpwuid and my_getgrgid to avoid potetntial buffer overflows
2) fixes all occurences of this function calls in tar.c , id.c , ls.c, whoami.c, logger.c, libbb.h.
3) The behaviour of tar, ls and logger is unchanged.
4) The behavior of ps with somewhat longer usernames messing up output is fixed.
5) The only bigger change was the increasing of size of the buffers in id.c to avoid
false negatives (unknown user: xxxxxx) with usernames longer than 8 chars.
The value i used ( 32 chars ) was taken from the tar header ( see gname and uname).
Maybe this buffers can be reduced a bit ( to 16 or whatever ), this is up to you.
6) The increase of size of the binary is not so dramatic:
size busybox
text data bss dec hex filename
239568 2300 36816 278684 4409c busybox
size busybox_fixed
text data bss dec hex filename
239616 2300 36816 278732 440cc busybox
7) The behaviour of whoami changed:
actually it prints out an username cut down to the size of the buffer.
This could be fixed by increasing the size of the buffer as in id.c or
avoid the use of my_getpwuid and use getpwuid directly instead.
Maybe this colud be also remain unchanged......
Please apply if you think it is ok to do so.
The diff applies on today's cvs tarball (2004-08-25).
Thanks in advance,
Ciao,
Tito
Hi to all,
This patch is useful for:
1) remove an unused var from extern char *find_real_root_device_name(const char* name)
changing it to extern char *find_real_root_device_name(void).
2) fixes include/libbb.h, coreutils/df.c, util-linux/mount.c and util-linux/umount.c accordingly.
3) fixes a bug, really a false positive, in find_real_root_device_name() that happens if
in the /dev directory exists a link named root (/dev/root) that should be skipped but
is not. This affects applets like df that display wrong results
dev_t. This is especially important now that the user space concept of a dev_t
and the kernel concept of a dev_t are divergant. The only bit of user space
allowed to know the number of major and minor bits is include/sys/sysmacros.h
(i.e. part of libc). When used with a current C library and a 2.6.x kernel,
this fix should allow BusyBox to support wide device major/minor numbers.
-Erik
"As noticed today by Steven Scholz, the od's `-v' was broken.
I've fixed that and now both the flags `-v' and `-a' are OK"
Fixes a segfault in
echo "uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu\02bar\4"| ./busybox od -av
Run this test, against both busybox and a non-busybox version of "tee".
while true; do i=$[$i+1]; echo "hello $i"; sleep 1; done | ./busybox tee
Now run the busybox one again with the following small patch applied:
Hi,
I just re-reviewed the patch I just sent...and it needed to be BUFSIZ-3 in
dos2unix.c . tempFn is BUFSIZ so the last addressable spot it BUFSIZ-1. The loop
increments by 2. That's why it should be BUFSIZ-3.
Best Regards,
Steve Grubb
Hello,
I found and patched 2 more bugs. The first is a misplaced semi-colon. The second
one is a buffer overflow. I doubt the buffer overflow is triggered in real life.
But you never know what those wily hackers are up to.
Thanks,
Steve Grubb
This is a bulk spelling fix patch against busybox-1.00-pre10.
If anyone gets a corrupted copy (and cares), let me know and
I will make alternate arrangements.
Erik - please apply.
Authors - please check that I didn't corrupt any meaning.
Package importers - see if any of these changes should be
passed to the upstream authors.
I glossed over lots of sloppy capitalizations, missing apostrophes,
mixed American/British spellings, and German-style compound words.
What is "pretect redefined for test" in cmdedit.c?
Good luck on the 1.00 release!
- Larry
I've noticed a bug in the "autowidth" feature more, and is probably in
others. The call to the function get_terminal_width_height() passes
in a file descriptor but that file descriptor is never used, instead
the ioctl() is called with 0. In more_main() the call to
get_terminal_width_height() passes 0 as the file descriptor instead of
fileno(cin). This isn't a problem when you more a file (e.g. "more
/etc/passwd") but when you pipe a file to it (e.g. "cat /etc/passwd |
more") the size of the terminal cannot be determined because file
descriptor 0 is not a terminal. The fix is simple, I've attached a
patch for more.c and get_terminal_width_height.c.
BAPper
Current `tr' implementation has a problem, if `plain char' is signed.
[current cvs version]
>echo a | _install/usr/bin/tr '\0' '\377'
Segmentation fault (core dumped)
[patched version]
>echo a | _install/usr/bin/tr '\0' '\377'
a
Hello,
when calling seq with
seq 1 1
it generates an "endless" list of numbers until the counter wraps and
reaches 1 again. The follwoing small patch should introduce the
expected behavior (output of 1 and termination):
regards,
Jean
uuencode fails to encode binary data because it right-shifts
bytes as signed chars and keeps the duplicated sign bits.
The original base64_encode() from wget/http.c is broken as well,
but it is only used to encode ascii data.
-- Pascal
archive_xread can be replaced with bb_full_read, and archive_copy_file
with bb_copyfd*
bb_copyfd is split into two functions bb_copyfd_size and bb_copyfd_eof,
they share a common backend.
the busybox menuconfig triggered my "inacceptable number of spelling mistakes"
upper level, so I decided to make a patch ;-)
I also improved some wording to describe some things in a better way.
Many thanks for an incredible piece of software!
Andreas Mohr, random OSS developer
Denis,
># ./busybox env - echo zzz
>zzz
># ./busybox echo -n zzz
>zzz
># ./busybox env - echo -n zzz
>env: invalid option -- n
>
> obviously, env tried to understand -n as env's option
> instead of blindly passing it to echo...
>
>BusyBox v1.00-pre1 (2003.07.16-07:53+0000) multi-call binary
>
>Usage: env [-iu] [-] [name=value]... [command]
Ah, you found very old problem.
Last patch also have:
- multiple "-u unsetenv" support
- GNU long option support
- save errno after exec failed before bb_perror_msg()
--w
vodz
Hello all,
This patch adds more "Help" text to the config system. Almost
all applets now have a help entry. Also, I cleaned up the spacing of
the existing text so that things are consistent. This patch is against
this morning's CVS.
Thomas Cameron
CEI Systems, Inc.
Latest BusyBox from CVS (Jul 7 2003).
File coreutils/ls.c
"if" at line 970 should be enclosed in #ifdef CONFIG_FEATURE_LS_SORTFILES
"if" at line 976 should be enclosed in #ifdef CONFIG_FEATURE_LS_TIMESTAMPS
"rootfs" entry as well as the traditional "/dev/root" entry. This caused
applets such as mount and df to display two root filesystem entries....
This teaches the relevant utilities to ignore the "rootfs" entry.
-Erik
Manuel,
I rewrite bb_getopt_ulflags() function for more universal usage.
My version support now:
- options with arguments (optional arg as GNU extension also)
- complementaly and/or incomplementaly and/or incongruously and/or list
options
- long_opt (all applets may have long option, add supporting is trivial)
This realisation full compatibile from your version.
Code size grow 480 bytes, but only coreutils/* over compensate this size
after using new function. Last patch reduced over 800 bytes and not full
applied to all. "mkdir" and "mv" applets have long_opt now for demonstrate
trivial addition support long_opt with usage new bb_getopt_ulflags().
Complementaly and/or incomplementaly and/or incongruously and/or list options
logic is not trivial, but new "cut" and "grep" applets using this logic
for examples with full demostrating. New "grep" applet reduced over 300
bytes.
Mark,
Also. I removed bug from "grep" applet.
$ echo a b | busybox grep -e a b
a b
a b
But right is printing one only.
--w
vodz
