Convert telnet to it. Now this works:
telnetd -b [::1]:1234 - bind to IPv6 non-standard port
telnet [::1]:1234 - connect to IPv6 non-standard port
telnet ::1 1234 - same
This does not require ANY ipv6-specific code in applets
(no struct sockaddr_in6. In fact, no sockaddr_in, too).
uidgid_get -> get_uidgid, add additional param
(numeric_ok). Make chown use it.
chown: fix "chown user: ...."
install: fix incorrect use of bb_xget[pw/gr]nam
* unpack: handle tar header fields which are not NUL terminated
* pack: handle 4+GB files correctly
* pack: refuse to store 101+ softlinks (was truncating link
target name)
* pack: mask mode with 07777
Use it where appropriate.
Stop scanning /etc/passwd *for every process*!!! (uid->username)
top: reduce memory usage - we won't save unneeded fields
from /proc info anymore. Downside: ~+250 bytes of code
It is impossible to formulate sane ABI based on
size of ulong because it can be 32-bit or 64-bit.
Basically it means that you cannot portably use
more that 32 option chars in one call anyway...
Make it explicit.
generated binaries, to make copyright enforcement easier. Our liason with
them (Bradley Kuhn) suggested the following text:
> Copyright (C) YEAR-2006 Erik Andersen, Rob Landley, and others.
> Licensed under GPLv2. See source distribution for full notice.
And the busybox help message seems the least offensive place to put it. (At
some point in the future, I need to strip 128 bytes from the binary to feel
good about this, though. :)
Minor header file cleanup while I was there, since libbb.h already #includes
most of that stuff...
We've had -Werror in the tree for quite a while, so adding #warning
somewhat counterproductve way to make comments on the code that belong on the
mailing list anyway.
option - it was going to return a special flag back to caller and
expecting caller to call it again with special parameter! Also
caller was charged with calling mount() syscall...
mount: mtab support was non-functional. Enabling it revealed serious bug
which is not fixed yet.
few new (unfinished) config options, which I intend to make hidden (but
enabled) when CONFIG_NITPICK is disabled. Getting the .config infrastructure
to do that is non-obvious, it seems...
were using "1" as one of the arguments anyway, and as for the rest a multiply
and a push isn't noticeably bigger than pushing two arguments on the stack.
things like xasprintf() into xfuncs.c, remove xprint_file_by_name() (it only
had one user), clean up lots of #includes... General cleanup pass. What I've
been doing for the last couple days.
And it conflicts! I've removed httpd.c from this checkin due to somebody else
touching that file. It builds for me. I have to catch a bus. (Now you know
why I'm looking forward to Mercurial.)
untangle them:
Rewrite u_signal_names() into get_signum() and get_signame(), plus trim the
signal list to that required by posix (they can specify the numbers for
the rest if they really need them). (This is preparatory cleanup for adding
a timeout applet like Roberto Foglietta wants.)
Export the itoa (added due to Denis Vlasenko, although it's not quite his
preferred implementation) from xfuncs.c so it's actually used, and remove
several other redundant implementations of itoa and utoa() in the tree.
what to exec. Add -f mode and a brief explanation of how to use it to replace
minicom. Add -l -l mode so you can turn any command into a server. And group
all of netcat's command line options under two CONFIG entries, so if you
disable both it doesn't use getopt at all.
the start of the path. (This should be under the same config option as
the standalone shell, but right now that's buried in the shell menu.)
Also add the ability to specify CONFIG_BUSYBOX_EXEC_PATH with /proc/self/exe
as an overrideable default.
moved the contents of libbb/bb_echo.c back into coreutils/echo.c,
which is a more reasonable place for them than libbb. this
forces anyone who wants echo and test to be builtin to ash to
also have them available as applets. their cost is very small,
and the number of people who wouldn't want them as applets is
also very small.
added warning about shell builtins vs. CONFIG_FEATURE_SH_STANDALONE_SHELL,
which conflicts with their use.
thanks to nathanael copa for debugging help.
some string size optimization in test.c may have been lost with
this commit, but this is a good new baseline.
can figure out what header files to include, and override stuff that comes
later. But applets shouldn't include platform.h directly, they should include
busybox.h or libbb.h. Since busybox.h already includes libbb.h, move libbb.h
to the top of busybox.h and platform.h near the top of libbb.h (right after
bbconfig.h, which is something platform.h also needs access to).
While we're at it, move some stuff from busybox.h to libbb.h so we have one
big file to audit/clean up/try to make sense of instead of many.
This needs a second pass to:
+ add bb_daemon(unsigned char no_chdir, unsigned char no_close, const char*flag)
+ eventually globally export argc and argv, so we don't need to pass it to
bb_daemon().
another... This adds bb_xspawn() support, which does vfork/exec. (I don't
know why using a static instead of a local adds ~40 bytes, but using
the local doesn't work...)
handle packets out of sequence if some data goes through the buffer and
some doesn't, B) it works on systems that can't handle aligned access,
C) we just have one code path to worry about.
While we're at it, sizeof() and RESERVE_CONFIG_BUFFER() really don't combine
well, which is why md5sum has been reading and processing data 4 bytes at a
time. I suspect that the existence of CONFIG_MD5_SIZE_VS_SPEED to do loop
unrolling and such in the algorithm was an attempt to work around that bug.
Somehow while applying the bb_do_delay patch a change slipped
in libbb.h that broke compilation.
libbb.h Line 355
extern char bb_path_mtab_file[];
This conflicts with mtab_file.c
#if defined(CONFIG_FEATURE_MTAB_SUPPORT)
const char bb_path_mtab_file[] = "/etc/mtab";
#else
const char bb_path_mtab_file[] = "/proc/mounts";
#endif
messages, C) can show the current association (if any) when called
with only one argument. Update the documentation a lot too.
Remind me to add a test suite for this thing. I think I've figured out
how to handle root-only testsuites...
- change llist_add_to_end as proposed by vodz in http://busybox.net/lists/busybox/2005-September/016411.html
- remove unneeded includes, add short boilerplate and copyright to llist.c
- move COMM_LEN from find_pid_by_name to libbb.h and use it in procps_status_t
- add reverse_pidlist() to find_pid_by_name. Will be needed for pidof.
the result of the ioctl so callers can tell if we have a tty. (0 means
we have a tty, nonzero means the ioctl couldn't find size info and we
fake 80x24. Really we should fake 80x25, but oh well...)
things down a bit, fixed a number of funky corner cases, added support for
several new features (things like mount --move, mount --bind, lazy unounts,
automatic detection of loop mounts, and so on). Probably broke several
other things, but it's fixable. (Bang on it, tell me what doesn't work for
you...)
Note: you no longer need to say "-o loop". It does that for you when
necessary.
Still need to add "user mount" support, which involves making mount suid. Not
too hard to do under the new infrastructure, just haven't done it yet...
The previous code had the following notes, that belong in the version
control comments:
- * 3/21/1999 Charles P. Wright <cpwright@cpwright.com>
- * searches through fstab when -a is passed
- * will try mounting stuff with all fses when passed -t auto
- *
- * 1999-04-17 Dave Cinege...Rewrote -t auto. Fixed ro mtab.
- *
- * 1999-10-07 Erik Andersen <andersen@codepoet.org>.
- * Rewrite of a lot of code. Removed mtab usage (I plan on
- * putting it back as a compile-time option some time),
- * major adjustments to option parsing, and some serious
- * dieting all around.
- *
- * 1999-11-06 mtab support is back - andersee
- *
- * 2000-01-12 Ben Collins <bcollins@debian.org>, Borrowed utils-linux's
- * mount to add loop support.
- *
- * 2000-04-30 Dave Cinege <dcinege@psychosis.com>
- * Rewrote fstab while loop and lower mount section. Can now do
- * single mounts from fstab. Can override fstab options for single
- * mount. Common mount_one call for single mounts and 'all'. Fixed
- * mtab updating and stale entries. Removed 'remount' default.
- *
Rob Landley, and others.
Currently CONFIG options are defined or undefined, so we chop out code with
#ifdefs, ala:
#ifdef CONFIG_THING
stuff();
#endif
This creates a new header file, bb_config.h, which sets the CONFIG entry to 1
or 0, and lets us do:
if(CONFIG_THING) stuff();
And let the compiler do dead code elimination to get rid of it. (Note: #ifdef
will still work because for the 1 case it's a static const int, not a #define.)
> Hi,
> this is a first attempt of size optimization for zcip taking into account all
> the hints given so far on the list.
> I've applied just the more obvious busyboxifications so maybe it could be
> optimized more.
BTW: I've ripped out a lot of debug code and changed c++ // comments to /* */
as both were rather confusing for a newbie like me. ;-)
Sorry to the author for that.
I know that this makes mantaining the code easier, but I'm simple minded....
Hi Erik,
Hi to all,
This is part five of the my_get*id story.
I've tweaked a bit this two functions to make them more flexible,
but this changes will not affect existing code.
Now they work so:
1) my_getpwuid( char *user, uid_t uid, int bufsize)
if bufsize is > 0 char *user cannot be set to NULL
on success username is written on static allocated buffer
on failure uid as string is written to buffer and NULL is returned
if bufsize is = 0 char *user can be set to NULL
on success username is returned
on failure NULL is returned
if bufsize is < 0 char *user can be set to NULL
on success username is returned
on failure an error message is printed and the program exits
2) 1) my_getgrgid( char *group, uid_t uid, int bufsize)
if bufsize is > 0 char *group cannot be set to NULL
on success groupname is written on static allocated buffer
on failure gid as string is written to buffer and NULL is returned
if bufsize is = 0 char *group can be set to NULL
on success groupname is returned
on failure NULL is returned
if bufsize is < 0 char *group can be set to nULL
on success groupname is returned
on failure an error message is printed and the program exits
This changes were needed mainly for my new id applet.
It is somewhat bigger then the previous but matches the behaviour of GNU id
and is capable to handle usernames of whatever length.
BTW: at a first look it seems to me that it will integrate well (with just a few changes)
with the pending patch in patches/id_groups_alias.patch.
The increase in size is balanced by the removal of my_getpwnamegid.c
from libbb as this was used only in previous id applet and by size optimizations
made possible in whoami.c and in passwd.c.
I know that we are in feature freeze but I think that i've tested it enough
(at least I hope so.......).
Hi,
I've spent the half night staring at the devilish my_getpwuid and my_getgrgid functions
trying to find out a way to avoid actual and future potential buffer overflow problems
without breaking existing code.
Finally I've found a not intrusive way to do this that surely doesn't break existing code
and fixes a couple of problems too.
The attached patch:
1) changes the behaviour of my_getpwuid and my_getgrgid to avoid potetntial buffer overflows
2) fixes all occurences of this function calls in tar.c , id.c , ls.c, whoami.c, logger.c, libbb.h.
3) The behaviour of tar, ls and logger is unchanged.
4) The behavior of ps with somewhat longer usernames messing up output is fixed.
5) The only bigger change was the increasing of size of the buffers in id.c to avoid
false negatives (unknown user: xxxxxx) with usernames longer than 8 chars.
The value i used ( 32 chars ) was taken from the tar header ( see gname and uname).
Maybe this buffers can be reduced a bit ( to 16 or whatever ), this is up to you.
6) The increase of size of the binary is not so dramatic:
size busybox
text data bss dec hex filename
239568 2300 36816 278684 4409c busybox
size busybox_fixed
text data bss dec hex filename
239616 2300 36816 278732 440cc busybox
7) The behaviour of whoami changed:
actually it prints out an username cut down to the size of the buffer.
This could be fixed by increasing the size of the buffer as in id.c or
avoid the use of my_getpwuid and use getpwuid directly instead.
Maybe this colud be also remain unchanged......
Please apply if you think it is ok to do so.
The diff applies on today's cvs tarball (2004-08-25).
Thanks in advance,
Ciao,
Tito
Hi to all,
This patch is useful for:
1) remove an unused var from extern char *find_real_root_device_name(const char* name)
changing it to extern char *find_real_root_device_name(void).
2) fixes include/libbb.h, coreutils/df.c, util-linux/mount.c and util-linux/umount.c accordingly.
3) fixes a bug, really a false positive, in find_real_root_device_name() that happens if
in the /dev directory exists a link named root (/dev/root) that should be skipped but
is not. This affects applets like df that display wrong results
On Sat, Jun 19, 2004 at 10:57:37PM +0200, Bastian Blank wrote:
> The following patch changes klogd to use openlog/syslog themself
> instead of calling syslog_msg which always calls the triple
> openlog/syslog/closelog.
Updated patch: get rid of syslog_msg entirely. Request from Erik Andersen.
Bastian
The updated patch adds a config option to explicitely enable 64 bit
arithmetic.
Also it removes the arith prototype from libbb.h as it is not used
outside of ash.
Bastian
this patch has been slightly modified by Erik for cleanliness.
function as there is no gracefull way of handling failures.
Rename bb_getport to bb_lookup_port, allow a default port to be
specified so it always returns a correct value.
Modify ftpgetput/rdate/wget to use the new interface.
wget/rdate now use etc/services with a falback default value.
archive_xread can be replaced with bb_full_read, and archive_copy_file
with bb_copyfd*
bb_copyfd is split into two functions bb_copyfd_size and bb_copyfd_eof,
they share a common backend.
in order to fix the problems with round robin DNS reported
by Andrew Flegg:
http://busybox.net/lists/busybox/2003-October/009579.html
This removes the ipv6 specific xconnect dns lookups. I do
not see why that would need to be special cased for ipv6 as
was done, but that will just have to be tested.
So IPV6 people -- please test this change!
-Erik
In BusyBox v1.00-pre2,
commands like ls, df with -h option report a wrong file size for files larger than 4GBtye!!
For example,
when I execute 'ls -l', it reports
-rw-r--r-- 1 root root 5368709120 Aug 17 2003 large_stream.tp
when I execute 'ls -lh', I expect that
-rw-r--r-- 1 root root 5.0G Aug 17 2003 large_stream.tp
but it reports
-rw-r--r-- 1 root root 1.0G Aug 17 2003 large_stream.tp
I fixed this bug that...
Line 31 in libbb/human_readable.c and line 275 include/libbb.h
const char *make_human_readable_str(unsigned long size
=> const char *make_human_readable_str(unsigned long long size
It's OK!
this patch fixes run_parts when it's called by ifupdown. 1) argv has to be a
NULL terminated char* array, not just a string. 2) run_parts now explicitly
sets the environment. this environment is populated from the
/etc/network/interfaces config file and is needed by the scripts in
/etc/network/if-pre-up.d/. when run-parts is called from the command line the
environment is taken from the current process.
Vladimir Oleynik then wrote:
You can simplify this if use:
+ bb_xasprintf(&buf[0], "/etc/network/if-%s.d", opt);
+ buf[1] = NULL;
+
+ run_parts(&buf, 2, environ);
+ free(buf[0]);
--w
vodz
Hi.
Last patch have new libbb function
vfork_rexec() for can use daemon() to uClinux system.
This patched daemons: syslog, klogd, inetd, crond.
This not tested! I havn`t this systems.
Also. Previous patch for feature request MD5 crypt password for
httpd don`t sended to this mailist on 07/15/03
(mailist have Pytom module problem?).
The previous patch included, and have testing.
--w
vodz
The current SC_x references automatically assume that everyone uses ttyS/tts
as their naming scheme for their serial ports. This isn't the case for quite
a few architectures, including sh, sh64, h8, arm, etc.
Hello, I think the test for an unconfigured httpd is wrong in
the CVS (busybox-unstable-20030620.tar.bz2)
flg_deny_all is default 0
vodz then wrote:
Oops. You are right.
Also, this mistake haved from two place.
Last patch rewroted to my new get_ularg() function for overcompensate size
from this error found ;-)
Manuel,
I rewrite bb_getopt_ulflags() function for more universal usage.
My version support now:
- options with arguments (optional arg as GNU extension also)
- complementaly and/or incomplementaly and/or incongruously and/or list
options
- long_opt (all applets may have long option, add supporting is trivial)
This realisation full compatibile from your version.
Code size grow 480 bytes, but only coreutils/* over compensate this size
after using new function. Last patch reduced over 800 bytes and not full
applied to all. "mkdir" and "mv" applets have long_opt now for demonstrate
trivial addition support long_opt with usage new bb_getopt_ulflags().
Complementaly and/or incomplementaly and/or incongruously and/or list options
logic is not trivial, but new "cut" and "grep" applets using this logic
for examples with full demostrating. New "grep" applet reduced over 300
bytes.
Mark,
Also. I removed bug from "grep" applet.
$ echo a b | busybox grep -e a b
a b
a b
But right is printing one only.
--w
vodz
Hi, Erik.
my_getpw(uid/gid) and applets used it have problem:
if username for uid not found, applets can`t detect it
(but code pessent). Also "%8ld " format is bad:
spaces not required (applets have self format
or spec format (tar applet) and overflow for "id" applet...)
This problem also pressent in stable version.
Patch for unstable in attach.
--w
vodz
#49: I found one memory overflow and memory leak in "ln" applet.
Last patch reduced also 54 bytes. ;)
#50: I found bug in loginutils/Makefile.in.
New patch have also new function to libbb and
aplied this to applets and other cosmetic changes.
IPV6 support to busybox. This patch does the following:
* Add IPv6 support to libbb
* Enable IPv6 interface address display
* Add IPv6 config option
* Adds ping6, an adaptation of the ping applet for IPv6
* Adds support routines for ping6:
- xgethostbyname2
- create_icmp6_socket
* Adds ifconfig support for IPv6
* Add support IPv6 to netstat
* Add IPv6 support to route
Thanks Bart!
1) tinylogin like with compile time selection and a chown root.root
2) Runtime configurable via /etc/busybox.conf (docu is in the works)
[Parts of this patch may overlap with my other two patches]
that into a pid_t, which is unsigned on a number archs. Furthermore,
find_pid_by_name() would _never_ return an error if the intended proces
was "init", but instead would return 1, meaning we would fail to work
on 2.4.x kernels running an initrd...
-Erik
math suport, cleaner math syntax error checking, moves redundant signal
string tables (from kill and ash) into libbb and provides a few
cleanups elsewhere.
was written by Aaron Lehmann <aaronl@vitelus.com> for busybox. This
patch makes a few trivial changes to Aaron's code so that it can be
used (in theory) by the other shells as well...
-Erik
1) fixed a bug that could crash df, mount, and umount applets if the root
device name was longer then the word "root" (/dev/loop1 vs /dev/root) -
2) severl functions needed static declaration in the umount applet
3) update declaration for function in last_char_is() in libbb
was only being used by insmod these days.
Also, I spent a minute adjusting insmod so that it first searches
/lib/modules/`uname -r` and then (if that fails) searches /lib/modules,
which makes bb insmod behave much more like the real insmod, and should
avoid nasty surprises (such as the recent "Modutils vs. Busybox..."
thread).
-Erik
This way, we can new get rid of all that tedious #define rubbish we used to
need to enable specific messages. This way is enormously simpler, and as a
bonus also ends up saving us 96 bytes.
-Erik
