busybox/include/usage.src.h
Denys Vlasenko b1560000c7 tweak udhcpd help text
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
2010-09-06 13:39:59 +02:00

4841 lines
171 KiB
C

/* vi: set sw=8 ts=8: */
/*
* This file suffers from chronically incorrect tabification
* of messages. Before editing this file:
* 1. Switch you editor to 8-space tab mode.
* 2. Do not use \t in messages, use real tab character.
* 3. Start each source line with message as follows:
* |<7 spaces>"text with tabs"....
* or
* |<5 spaces>"\ntext with tabs"....
*/
#ifndef BB_USAGE_H
#define BB_USAGE_H 1
#define NOUSAGE_STR "\b"
INSERT
#define acpid_trivial_usage \
"[-d] [-c CONFDIR] [-l LOGFILE] [-e PROC_EVENT_FILE] [EVDEV_EVENT_FILE]..."
#define acpid_full_usage "\n\n" \
"Listen to ACPI events and spawn specific helpers on event arrival\n" \
"\nOptions:" \
"\n -d Don't daemonize, log to stderr" \
"\n -c DIR Config directory [/etc/acpi]" \
"\n -e FILE /proc event file [/proc/acpi/event]" \
"\n -l FILE Log file [/var/log/acpid]" \
IF_FEATURE_ACPID_COMPAT( \
"\n\nAccept and ignore compatibility options -g -m -s -S -v" \
)
#define acpid_example_usage \
"# acpid -l /var/log/my-acpi-log\n" \
"# acpid -d /dev/input/event*\n"
#define addgroup_trivial_usage \
"[-g GID] " IF_FEATURE_ADDUSER_TO_GROUP("[USER] ") "GROUP"
#define addgroup_full_usage "\n\n" \
"Add a group " IF_FEATURE_ADDUSER_TO_GROUP("or add a user to a group") "\n" \
"\nOptions:" \
"\n -g GID Group id" \
"\n -S Create a system group" \
#define adduser_trivial_usage \
"[OPTIONS] USER"
#define adduser_full_usage "\n\n" \
"Add a user\n" \
"\nOptions:" \
"\n -h DIR Home directory" \
"\n -g GECOS GECOS field" \
"\n -s SHELL Login shell" \
"\n -G GRP Add user to existing group" \
"\n -S Create a system user" \
"\n -D Don't assign a password" \
"\n -H Don't create home directory" \
"\n -u UID User id" \
#define adjtimex_trivial_usage \
"[-q] [-o OFF] [-f FREQ] [-p TCONST] [-t TICK]"
#define adjtimex_full_usage "\n\n" \
"Read and optionally set system timebase parameters. See adjtimex(2)\n" \
"\nOptions:" \
"\n -q Quiet" \
"\n -o OFF Time offset, microseconds" \
"\n -f FREQ Frequency adjust, integer kernel units (65536 is 1ppm)" \
"\n (positive values make clock run faster)" \
"\n -t TICK Microseconds per tick, usually 10000" \
"\n -p TCONST" \
#define ar_trivial_usage \
"[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
#define ar_full_usage "\n\n" \
"Extract or list FILES from an ar archive\n" \
"\nOptions:" \
"\n -o Preserve original dates" \
"\n -p Extract to stdout" \
"\n -t List" \
"\n -x Extract" \
"\n -v Verbose" \
#define arp_trivial_usage \
"\n[-vn] [-H HWTYPE] [-i IF] -a [HOSTNAME]" \
"\n[-v] [-i IF] -d HOSTNAME [pub]" \
"\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [temp]" \
"\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [netmask MASK] pub" \
"\n[-v] [-H HWTYPE] [-i IF] -Ds HOSTNAME IFACE [netmask MASK] pub"
#define arp_full_usage "\n\n" \
"Manipulate ARP cache\n" \
"\nOptions:" \
"\n -a Display (all) hosts" \
"\n -s Set new ARP entry" \
"\n -d Delete a specified entry" \
"\n -v Verbose" \
"\n -n Don't resolve names" \
"\n -i IF Network interface" \
"\n -D Read <hwaddr> from given device" \
"\n -A, -p AF Protocol family" \
"\n -H HWTYPE Hardware address type" \
#define arping_trivial_usage \
"[-fqbDUA] [-c CNT] [-w TIMEOUT] [-I IFACE] [-s SRC_IP] DST_IP"
#define arping_full_usage "\n\n" \
"Send ARP requests/replies\n" \
"\nOptions:" \
"\n -f Quit on first ARP reply" \
"\n -q Quiet" \
"\n -b Keep broadcasting, don't go unicast" \
"\n -D Duplicated address detection mode" \
"\n -U Unsolicited ARP mode, update your neighbors" \
"\n -A ARP answer mode, update your neighbors" \
"\n -c N Stop after sending N ARP requests" \
"\n -w TIMEOUT Time to wait for ARP reply, seconds" \
"\n -I IFACE Interface to use (default eth0)" \
"\n -s SRC_IP Sender IP address" \
"\n DST_IP Target IP address" \
#define awk_trivial_usage \
"[OPTIONS] [AWK_PROGRAM] [FILE]..."
#define awk_full_usage "\n\n" \
"Options:" \
"\n -v VAR=VAL Set variable" \
"\n -F SEP Use SEP as field separator" \
"\n -f FILE Read program from FILE" \
#define basename_trivial_usage \
"FILE [SUFFIX]"
#define basename_full_usage "\n\n" \
"Strip directory path and .SUFFIX from FILE\n"
#define basename_example_usage \
"$ basename /usr/local/bin/foo\n" \
"foo\n" \
"$ basename /usr/local/bin/\n" \
"bin\n" \
"$ basename /foo/bar.txt .txt\n" \
"bar"
#define beep_trivial_usage \
"-f FREQ -l LEN -d DELAY -r COUNT -n"
#define beep_full_usage "\n\n" \
"Options:" \
"\n -f Frequency in Hz" \
"\n -l Length in ms" \
"\n -d Delay in ms" \
"\n -r Repetitions" \
"\n -n Start new tone" \
#define blkid_trivial_usage \
""
#define blkid_full_usage "\n\n" \
"Print UUIDs of all filesystems"
#define brctl_trivial_usage \
"COMMAND [BRIDGE [INTERFACE]]"
#define brctl_full_usage "\n\n" \
"Manage ethernet bridges\n" \
"\nCommands:" \
IF_FEATURE_BRCTL_SHOW( \
"\n show Show a list of bridges" \
) \
"\n addbr BRIDGE Create BRIDGE" \
"\n delbr BRIDGE Delete BRIDGE" \
"\n addif BRIDGE IFACE Add IFACE to BRIDGE" \
"\n delif BRIDGE IFACE Delete IFACE from BRIDGE" \
IF_FEATURE_BRCTL_FANCY( \
"\n setageing BRIDGE TIME Set ageing time" \
"\n setfd BRIDGE TIME Set bridge forward delay" \
"\n sethello BRIDGE TIME Set hello time" \
"\n setmaxage BRIDGE TIME Set max message age" \
"\n setpathcost BRIDGE COST Set path cost" \
"\n setportprio BRIDGE PRIO Set port priority" \
"\n setbridgeprio BRIDGE PRIO Set bridge priority" \
"\n stp BRIDGE [1/yes/on|0/no/off] STP on/off" \
) \
#define bzip2_trivial_usage \
"[OPTIONS] [FILE]..."
#define bzip2_full_usage "\n\n" \
"Compress FILEs (or stdin) with bzip2 algorithm\n" \
"\nOptions:" \
"\n -1..9 Compression level" \
"\n -d Decompress" \
"\n -c Write to stdout" \
"\n -f Force" \
#define busybox_notes_usage \
"Hello world!\n"
#define lzop_trivial_usage \
"[-cfvd123456789CF] [FILE]..."
#define lzop_full_usage "\n\n" \
"Options:" \
"\n -1..9 Compression level" \
"\n -d Decompress" \
"\n -c Write to stdout" \
"\n -f Force" \
"\n -v Verbose" \
"\n -F Don't store or verify checksum" \
"\n -C Also write checksum of compressed block" \
#define lzopcat_trivial_usage \
"[-vCF] [FILE]..."
#define lzopcat_full_usage "\n\n" \
" -v Verbose" \
"\n -F Don't store or verify checksum" \
#define unlzop_trivial_usage \
"[-cfvCF] [FILE]..."
#define unlzop_full_usage "\n\n" \
"Options:" \
"\n -c Write to stdout" \
"\n -f Force" \
"\n -v Verbose" \
"\n -F Don't store or verify checksum" \
#define unlzma_trivial_usage \
"[OPTIONS] [FILE]..."
#define unlzma_full_usage "\n\n" \
"Decompress FILE (or stdin)\n" \
"\nOptions:" \
"\n -c Write to stdout" \
"\n -f Force" \
#define lzma_trivial_usage \
"-d [OPTIONS] [FILE]..."
#define lzma_full_usage "\n\n" \
"Decompress FILE (or stdin)\n" \
"\nOptions:" \
"\n -d Decompress" \
"\n -c Write to stdout" \
"\n -f Force" \
#define lzcat_trivial_usage \
"FILE"
#define lzcat_full_usage "\n\n" \
"Decompress to stdout"
#define unxz_trivial_usage \
"[OPTIONS] [FILE]..."
#define unxz_full_usage "\n\n" \
"Decompress FILE (or stdin)\n" \
"\nOptions:" \
"\n -c Write to stdout" \
"\n -f Force" \
#define xz_trivial_usage \
"-d [OPTIONS] [FILE]..."
#define xz_full_usage "\n\n" \
"Decompress FILE (or stdin)\n" \
"\nOptions:" \
"\n -d Decompress" \
"\n -c Write to stdout" \
"\n -f Force" \
#define xzcat_trivial_usage \
"FILE"
#define xzcat_full_usage "\n\n" \
"Decompress to stdout"
#define cal_trivial_usage \
"[-jy] [[MONTH] YEAR]"
#define cal_full_usage "\n\n" \
"Display a calendar\n" \
"\nOptions:" \
"\n -j Use julian dates" \
"\n -y Display the entire year" \
#define cat_trivial_usage \
"[FILE]..."
#define cat_full_usage "\n\n" \
"Concatenate FILEs and print them to stdout" \
#define cat_example_usage \
"$ cat /proc/uptime\n" \
"110716.72 17.67"
#define catv_trivial_usage \
"[-etv] [FILE]..."
#define catv_full_usage "\n\n" \
"Display nonprinting characters as ^x or M-x\n" \
"\nOptions:" \
"\n -e End each line with $" \
"\n -t Show tabs as ^I" \
"\n -v Don't use ^x or M-x escapes" \
#define chat_trivial_usage \
"EXPECT [SEND [EXPECT [SEND...]]]"
#define chat_full_usage "\n\n" \
"Useful for interacting with a modem connected to stdin/stdout.\n" \
"A script consists of one or more \"expect-send\" pairs of strings,\n" \
"each pair is a pair of arguments. Example:\n" \
"chat '' ATZ OK ATD123456 CONNECT '' ogin: pppuser word: ppppass '~'" \
#define chattr_trivial_usage \
"[-R] [-+=AacDdijsStTu] [-v VERSION] [FILE]..."
#define chattr_full_usage "\n\n" \
"Change file attributes on an ext2 fs\n" \
"\nModifiers:" \
"\n - Remove attributes" \
"\n + Add attributes" \
"\n = Set attributes" \
"\nAttributes:" \
"\n A Don't track atime" \
"\n a Append mode only" \
"\n c Enable compress" \
"\n D Write dir contents synchronously" \
"\n d Don't backup with dump" \
"\n i Cannot be modified (immutable)" \
"\n j Write all data to journal first" \
"\n s Zero disk storage when deleted" \
"\n S Write file contents synchronously" \
"\n t Disable tail-merging of partial blocks with other files" \
"\n u Allow file to be undeleted" \
"\nOptions:" \
"\n -R Recurse" \
"\n -v Set the file's version/generation number" \
#define chcon_trivial_usage \
"[OPTIONS] CONTEXT FILE..." \
"\n chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE..." \
IF_FEATURE_CHCON_LONG_OPTIONS( \
"\n chcon [OPTIONS] --reference=RFILE FILE..." \
)
#define chcon_full_usage "\n\n" \
"Change the security context of each FILE to CONTEXT\n" \
IF_FEATURE_CHCON_LONG_OPTIONS( \
"\n -v,--verbose Verbose" \
"\n -c,--changes Report changes made" \
"\n -h,--no-dereference Affect symlinks instead of their targets" \
"\n -f,--silent,--quiet Suppress most error messages" \
"\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \
"\n -u,--user=USER Set user/role/type/range in the target" \
"\n -r,--role=ROLE security context" \
"\n -t,--type=TYPE" \
"\n -l,--range=RANGE" \
"\n -R,--recursive Recurse" \
) \
IF_NOT_FEATURE_CHCON_LONG_OPTIONS( \
"\n -v Verbose" \
"\n -c Report changes made" \
"\n -h Affect symlinks instead of their targets" \
"\n -f Suppress most error messages" \
"\n -u USER Set user/role/type/range in the target security context" \
"\n -r ROLE" \
"\n -t TYPE" \
"\n -l RNG" \
"\n -R Recurse" \
)
#define chmod_trivial_usage \
"[-R"IF_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
#define chmod_full_usage "\n\n" \
"Each MODE is one or more of the letters ugoa, one of the\n" \
"symbols +-= and one or more of the letters rwxst\n" \
"\nOptions:" \
"\n -R Recurse" \
IF_DESKTOP( \
"\n -c List changed files" \
"\n -v List all files" \
"\n -f Hide errors" \
)
#define chmod_example_usage \
"$ ls -l /tmp/foo\n" \
"-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
"$ chmod u+x /tmp/foo\n" \
"$ ls -l /tmp/foo\n" \
"-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \
"$ chmod 444 /tmp/foo\n" \
"$ ls -l /tmp/foo\n" \
"-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
#define chgrp_trivial_usage \
"[-RhLHP"IF_DESKTOP("cvf")"]... GROUP FILE..."
#define chgrp_full_usage "\n\n" \
"Change the group membership of each FILE to GROUP\n" \
"\nOptions:" \
"\n -R Recurse" \
"\n -h Affect symlinks instead of symlink targets" \
"\n -L Traverse all symlinks to directories" \
"\n -H Traverse symlinks on command line only" \
"\n -P Don't traverse symlinks (default)" \
IF_DESKTOP( \
"\n -c List changed files" \
"\n -v Verbose" \
"\n -f Hide errors" \
)
#define chgrp_example_usage \
"$ ls -l /tmp/foo\n" \
"-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
"$ chgrp root /tmp/foo\n" \
"$ ls -l /tmp/foo\n" \
"-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
#define chown_trivial_usage \
"[-RhLHP"IF_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
#define chown_full_usage "\n\n" \
"Change the owner and/or group of each FILE to OWNER and/or GROUP\n" \
"\nOptions:" \
"\n -R Recurse" \
"\n -h Affect symlinks instead of symlink targets" \
"\n -L Traverse all symlinks to directories" \
"\n -H Traverse symlinks on command line only" \
"\n -P Don't traverse symlinks (default)" \
IF_DESKTOP( \
"\n -c List changed files" \
"\n -v List all files" \
"\n -f Hide errors" \
)
#define chown_example_usage \
"$ ls -l /tmp/foo\n" \
"-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
"$ chown root /tmp/foo\n" \
"$ ls -l /tmp/foo\n" \
"-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \
"$ chown root.root /tmp/foo\n" \
"ls -l /tmp/foo\n" \
"-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
#define chpst_trivial_usage \
"[-vP012] [-u USER[:GRP]] [-U USER[:GRP]] [-e DIR]\n" \
" [-/ DIR] [-n NICE] [-m BYTES] [-d BYTES] [-o N]\n" \
" [-p N] [-f BYTES] [-c BYTES] PROG ARGS"
#define chpst_full_usage "\n\n" \
"Change the process state, run PROG\n" \
"\nOptions:" \
"\n -u USER[:GRP] Set uid and gid" \
"\n -U USER[:GRP] Set $UID and $GID in environment" \
"\n -e DIR Set environment variables as specified by files" \
"\n in DIR: file=1st_line_of_file" \
"\n -/ DIR Chroot to DIR" \
"\n -n NICE Add NICE to nice value" \
"\n -m BYTES Same as -d BYTES -s BYTES -l BYTES" \
"\n -d BYTES Limit data segment" \
"\n -o N Limit number of open files per process" \
"\n -p N Limit number of processes per uid" \
"\n -f BYTES Limit output file sizes" \
"\n -c BYTES Limit core file size" \
"\n -v Verbose" \
"\n -P Create new process group" \
"\n -0 Close stdin" \
"\n -1 Close stdout" \
"\n -2 Close stderr" \
#define setuidgid_trivial_usage \
"USER PROG ARGS"
#define setuidgid_full_usage "\n\n" \
"Set uid and gid to USER's uid and gid, drop supplementary group ids,\n" \
"run PROG"
#define envuidgid_trivial_usage \
"USER PROG ARGS"
#define envuidgid_full_usage "\n\n" \
"Set $UID to USER's uid and $GID to USER's gid, run PROG"
#define envdir_trivial_usage \
"DIR PROG ARGS"
#define envdir_full_usage "\n\n" \
"Set various environment variables as specified by files\n" \
"in the directory DIR, run PROG"
#define softlimit_trivial_usage \
"[-a BYTES] [-m BYTES] [-d BYTES] [-s BYTES] [-l BYTES]\n" \
" [-f BYTES] [-c BYTES] [-r BYTES] [-o N] [-p N] [-t N]\n" \
" PROG ARGS"
#define softlimit_full_usage "\n\n" \
"Set soft resource limits, then run PROG\n" \
"\nOptions:" \
"\n -a BYTES Limit total size of all segments" \
"\n -m BYTES Same as -d BYTES -s BYTES -l BYTES -a BYTES" \
"\n -d BYTES Limit data segment" \
"\n -s BYTES Limit stack segment" \
"\n -l BYTES Limit locked memory size" \
"\n -o N Limit number of open files per process" \
"\n -p N Limit number of processes per uid" \
"\nOptions controlling file sizes:" \
"\n -f BYTES Limit output file sizes" \
"\n -c BYTES Limit core file size" \
"\nEfficiency opts:" \
"\n -r BYTES Limit resident set size" \
"\n -t N Limit CPU time, process receives" \
"\n a SIGXCPU after N seconds" \
#define chroot_trivial_usage \
"NEWROOT [PROG ARGS]"
#define chroot_full_usage "\n\n" \
"Run PROG with root directory set to NEWROOT"
#define chroot_example_usage \
"$ ls -l /bin/ls\n" \
"lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
"# mount /dev/hdc1 /mnt -t minix\n" \
"# chroot /mnt\n" \
"# ls -l /bin/ls\n" \
"-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
#define chvt_trivial_usage \
"N"
#define chvt_full_usage "\n\n" \
"Change the foreground virtual terminal to /dev/ttyN"
#define cksum_trivial_usage \
"FILES..."
#define cksum_full_usage "\n\n" \
"Calculate the CRC32 checksums of FILES"
#define clear_trivial_usage \
""
#define clear_full_usage "\n\n" \
"Clear screen"
#define cmp_trivial_usage \
"[-l] [-s] FILE1 [FILE2" IF_DESKTOP(" [SKIP1 [SKIP2]]") "]"
#define cmp_full_usage "\n\n" \
"Compare FILE1 with FILE2 (or stdin)\n" \
"\nOptions:" \
"\n -l Write the byte numbers (decimal) and values (octal)" \
"\n for all differing bytes" \
"\n -s Quiet" \
#define comm_trivial_usage \
"[-123] FILE1 FILE2"
#define comm_full_usage "\n\n" \
"Compare FILE1 with FILE2\n" \
"\nOptions:" \
"\n -1 Suppress lines unique to FILE1" \
"\n -2 Suppress lines unique to FILE2" \
"\n -3 Suppress lines common to both files" \
#define bbconfig_trivial_usage \
""
#define bbconfig_full_usage "\n\n" \
"Print the config file used by busybox build"
#define chrt_trivial_usage \
"[OPTIONS] [PRIO] [PID | PROG ARGS]"
#define chrt_full_usage "\n\n" \
"Change scheduling priority and class for a process\n" \
"\nOptions:" \
"\n -p Operate on PID" \
"\n -r Set SCHED_RR class" \
"\n -f Set SCHED_FIFO class" \
"\n -o Set SCHED_OTHER class" \
"\n -m Show min/max priorities" \
#define chrt_example_usage \
"$ chrt -r 4 sleep 900; x=$!\n" \
"$ chrt -f -p 3 $x\n" \
"You need CAP_SYS_NICE privileges to set scheduling attributes of a process"
#define nice_trivial_usage \
"[-n ADJUST] [PROG ARGS]"
#define nice_full_usage "\n\n" \
"Change scheduling priority, run PROG\n" \
"\nOptions:" \
"\n -n ADJUST Adjust priority by ADJUST" \
#define renice_trivial_usage \
"{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]"
#define renice_full_usage "\n\n" \
"Change scheduling priority for a running process\n" \
"\nOptions:" \
"\n -n Adjust current nice value (smaller is faster)" \
"\n -p Process id(s) (default)" \
"\n -g Process group id(s)" \
"\n -u Process user name(s) and/or id(s)" \
#define ionice_trivial_usage \
"[-c 1-3] [-n 0-7] [-p PID] [PROG]"
#define ionice_full_usage "\n\n" \
"Change I/O priority and class\n" \
"\nOptions:" \
"\n -c Class. 1:realtime 2:best-effort 3:idle" \
"\n -n Priority" \
#define cp_trivial_usage \
"[OPTIONS] SOURCE DEST"
#define cp_full_usage "\n\n" \
"Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY\n" \
"\nOptions:" \
"\n -a Same as -dpR" \
IF_SELINUX( \
"\n -c Preserve security context" \
) \
"\n -R,-r Recurse" \
"\n -d,-P Preserve symlinks (default if -R)" \
"\n -L Follow all symlinks" \
"\n -H Follow symlinks on command line" \
"\n -p Preserve file attributes if possible" \
"\n -f Overwrite" \
"\n -i Prompt before overwrite" \
"\n -l,-s Create (sym)links" \
#define cpio_trivial_usage \
"[-dmvu] [-F FILE]" IF_FEATURE_CPIO_O(" [-H newc]") \
" [-ti"IF_FEATURE_CPIO_O("o")"]" IF_FEATURE_CPIO_P(" [-p DIR]")
#define cpio_full_usage "\n\n" \
"Extract or list files from a cpio archive" \
IF_FEATURE_CPIO_O(", or" \
"\ncreate an archive" IF_FEATURE_CPIO_P(" (-o) or copy files (-p)") \
" using file list on stdin" \
) \
"\n" \
"\nMain operation mode:" \
"\n -t List" \
"\n -i Extract" \
IF_FEATURE_CPIO_O( \
"\n -o Create (requires -H newc)" \
) \
IF_FEATURE_CPIO_P( \
"\n -p DIR Copy files to DIR" \
) \
"\nOptions:" \
"\n -d Make leading directories" \
"\n -m Preserve mtime" \
"\n -v Verbose" \
"\n -u Overwrite" \
"\n -F FILE Input (-t,-i,-p) or output (-o) file" \
IF_FEATURE_CPIO_O( \
"\n -H newc Archive format" \
) \
#define crond_trivial_usage \
"-fbS -l N " IF_FEATURE_CROND_D("-d N ") "-L LOGFILE -c DIR"
#define crond_full_usage "\n\n" \
" -f Foreground" \
"\n -b Background (default)" \
"\n -S Log to syslog (default)" \
"\n -l Set log level. 0 is the most verbose, default 8" \
IF_FEATURE_CROND_D( \
"\n -d Set log level, log to stderr" \
) \
"\n -L Log to file" \
"\n -c Working dir" \
#define crontab_trivial_usage \
"[-c DIR] [-u USER] [-ler]|[FILE]"
#define crontab_full_usage "\n\n" \
" -c Crontab directory" \
"\n -u User" \
"\n -l List crontab" \
"\n -e Edit crontab" \
"\n -r Delete crontab" \
"\n FILE Replace crontab by FILE ('-': stdin)" \
#define cryptpw_trivial_usage \
"[OPTIONS] [PASSWORD] [SALT]"
/* We do support -s, we just don't mention it */
#define cryptpw_full_usage "\n\n" \
"Crypt the PASSWORD using crypt(3)\n" \
"\nOptions:" \
IF_LONG_OPTS( \
"\n -P,--password-fd=N Read password from fd N" \
/* "\n -s,--stdin Use stdin; like -P0" */ \
"\n -m,--method=TYPE Encryption method TYPE" \
"\n -S,--salt=SALT" \
) \
IF_NOT_LONG_OPTS( \
"\n -P N Read password from fd N" \
/* "\n -s Use stdin; like -P0" */ \
"\n -m TYPE Encryption method TYPE" \
"\n -S SALT" \
) \
/* mkpasswd is an alias to cryptpw */
#define mkpasswd_trivial_usage \
"[OPTIONS] [PASSWORD] [SALT]"
/* We do support -s, we just don't mention it */
#define mkpasswd_full_usage "\n\n" \
"Crypt the PASSWORD using crypt(3)\n" \
"\nOptions:" \
IF_LONG_OPTS( \
"\n -P,--password-fd=N Read password from fd N" \
/* "\n -s,--stdin Use stdin; like -P0" */ \
"\n -m,--method=TYPE Encryption method TYPE" \
"\n -S,--salt=SALT" \
) \
IF_NOT_LONG_OPTS( \
"\n -P N Read password from fd N" \
/* "\n -s Use stdin; like -P0" */ \
"\n -m TYPE Encryption method TYPE" \
"\n -S SALT" \
) \
#define cut_trivial_usage \
"[OPTIONS] [FILE]..."
#define cut_full_usage "\n\n" \
"Print selected fields from each input FILE to stdout\n" \
"\nOptions:" \
"\n -b LIST Output only bytes from LIST" \
"\n -c LIST Output only characters from LIST" \
"\n -d CHAR Use CHAR instead of tab as the field delimiter" \
"\n -s Output only the lines containing delimiter" \
"\n -f N Print only these fields" \
"\n -n Ignored" \
#define cut_example_usage \
"$ echo \"Hello world\" | cut -f 1 -d ' '\n" \
"Hello\n" \
"$ echo \"Hello world\" | cut -f 2 -d ' '\n" \
"world\n"
#define date_trivial_usage \
"[OPTIONS] [+FMT] [TIME]"
#define date_full_usage "\n\n" \
"Display time (using +FMT), or set time\n" \
"\nOptions:" \
IF_NOT_LONG_OPTS( \
"\n [-s] TIME Set time to TIME" \
"\n -u Work in UTC (don't convert to local time)" \
"\n -R Output RFC-2822 compliant date string" \
) IF_LONG_OPTS( \
"\n [-s,--set] TIME Set time to TIME" \
"\n -u,--utc Work in UTC (don't convert to local time)" \
"\n -R,--rfc-2822 Output RFC-2822 compliant date string" \
) \
IF_FEATURE_DATE_ISOFMT( \
"\n -I[SPEC] Output ISO-8601 compliant date string" \
"\n SPEC='date' (default) for date only," \
"\n 'hours', 'minutes', or 'seconds' for date and" \
"\n time to the indicated precision" \
) IF_NOT_LONG_OPTS( \
"\n -r FILE Display last modification time of FILE" \
"\n -d TIME Display TIME, not 'now'" \
) IF_LONG_OPTS( \
"\n -r,--reference FILE Display last modification time of FILE" \
"\n -d,--date TIME Display TIME, not 'now'" \
) \
IF_FEATURE_DATE_ISOFMT( \
"\n -D FMT Use FMT for -d TIME conversion" \
) \
"\n" \
"\nRecognized TIME formats:" \
"\n hh:mm[:ss]" \
"\n [YYYY.]MM.DD-hh:mm[:ss]" \
"\n YYYY-MM-DD hh:mm[:ss]" \
"\n [[[[[YY]YY]MM]DD]hh]mm[.ss]" \
#define date_example_usage \
"$ date\n" \
"Wed Apr 12 18:52:41 MDT 2000\n"
#define dd_trivial_usage \
"[if=FILE] [of=FILE] " IF_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
" [seek=N]" IF_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync|fsync]")
#define dd_full_usage "\n\n" \
"Copy a file with converting and formatting\n" \
"\nOptions:" \
"\n if=FILE Read from FILE instead of stdin" \
"\n of=FILE Write to FILE instead of stdout" \
"\n bs=N Read and write N bytes at a time" \
IF_FEATURE_DD_IBS_OBS( \
"\n ibs=N Read N bytes at a time" \
) \
IF_FEATURE_DD_IBS_OBS( \
"\n obs=N Write N bytes at a time" \
) \
"\n count=N Copy only N input blocks" \
"\n skip=N Skip N input blocks" \
"\n seek=N Skip N output blocks" \
IF_FEATURE_DD_IBS_OBS( \
"\n conv=notrunc Don't truncate output file" \
"\n conv=noerror Continue after read errors" \
"\n conv=sync Pad blocks with zeros" \
"\n conv=fsync Physically write data out before finishing" \
) \
"\n" \
"\nNumbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024)," \
"\nMD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" \
#define dd_example_usage \
"$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
"4+0 records in\n" \
"4+0 records out\n"
#define deallocvt_trivial_usage \
"[N]"
#define deallocvt_full_usage "\n\n" \
"Deallocate unused virtual terminal /dev/ttyN"
#define delgroup_trivial_usage \
IF_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP"
#define delgroup_full_usage "\n\n" \
"Delete group GROUP from the system" \
IF_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP")
#define deluser_trivial_usage \
"USER"
#define deluser_full_usage "\n\n" \
"Delete USER from the system"
#define depmod_trivial_usage NOUSAGE_STR
#define depmod_full_usage ""
#define devmem_trivial_usage \
"ADDRESS [WIDTH [VALUE]]"
#define devmem_full_usage "\n\n" \
"Read/write from physical address\n" \
"\n ADDRESS Address to act upon" \
"\n WIDTH Width (8/16/...)" \
"\n VALUE Data to be written" \
#define devfsd_trivial_usage \
"mntpnt [-v]" IF_DEVFSD_FG_NP("[-fg][-np]")
#define devfsd_full_usage "\n\n" \
"Manage devfs permissions and old device name symlinks\n" \
"\nOptions:" \
"\n mntpnt The mount point where devfs is mounted" \
"\n -v Print the protocol version numbers for devfsd" \
"\n and the kernel-side protocol version and exit" \
IF_DEVFSD_FG_NP( \
"\n -fg Run in foreground" \
"\n -np Exit after parsing the configuration file" \
"\n and processing synthetic REGISTER events," \
"\n don't poll for events" \
)
#define df_trivial_usage \
"[-Pk" \
IF_FEATURE_HUMAN_READABLE("mh") \
IF_FEATURE_DF_FANCY("ai] [-B SIZE") \
"] [FILESYSTEM]..."
#define df_full_usage "\n\n" \
"Print filesystem usage statistics\n" \
"\nOptions:" \
"\n -P POSIX output format" \
"\n -k 1024-byte blocks (default)" \
IF_FEATURE_HUMAN_READABLE( \
"\n -m 1M-byte blocks" \
"\n -h Human readable (e.g. 1K 243M 2G)" \
) \
IF_FEATURE_DF_FANCY( \
"\n -a Show all filesystems" \
"\n -i Inodes" \
"\n -B SIZE Blocksize" \
) \
#define df_example_usage \
"$ df\n" \
"Filesystem 1K-blocks Used Available Use% Mounted on\n" \
"/dev/sda3 8690864 8553540 137324 98% /\n" \
"/dev/sda1 64216 36364 27852 57% /boot\n" \
"$ df /dev/sda3\n" \
"Filesystem 1K-blocks Used Available Use% Mounted on\n" \
"/dev/sda3 8690864 8553540 137324 98% /\n" \
"$ POSIXLY_CORRECT=sure df /dev/sda3\n" \
"Filesystem 512B-blocks Used Available Use% Mounted on\n" \
"/dev/sda3 17381728 17107080 274648 98% /\n" \
"$ POSIXLY_CORRECT=yep df -P /dev/sda3\n" \
"Filesystem 512-blocks Used Available Capacity Mounted on\n" \
"/dev/sda3 17381728 17107080 274648 98% /\n"
#define dhcprelay_trivial_usage \
"CLIENT_IFACE[,CLIENT_IFACE2]... SERVER_IFACE [SERVER_IP]"
#define dhcprelay_full_usage "\n\n" \
"Relay DHCP requests between clients and server" \
#define diff_trivial_usage \
"[-abBdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
#define diff_full_usage "\n\n" \
"Compare files line by line and output the differences between them.\n" \
"This implementation supports unified diffs only.\n" \
"\nOptions:" \
"\n -a Treat all files as text" \
"\n -b Ignore changes in the amount of whitespace" \
"\n -B Ignore changes whose lines are all blank" \
"\n -d Try hard to find a smaller set of changes" \
"\n -i Ignore case differences" \
"\n -L Use LABEL instead of the filename in the unified header" \
"\n -N Treat absent files as empty" \
"\n -q Output only whether files differ" \
"\n -r Recurse" \
"\n -S Start with FILE when comparing directories" \
"\n -T Make tabs line up by prefixing a tab when necessary" \
"\n -s Report when two files are the same" \
"\n -t Expand tabs to spaces in output" \
"\n -U Output LINES lines of context" \
"\n -w Ignore all whitespace" \
#define dirname_trivial_usage \
"FILENAME"
#define dirname_full_usage "\n\n" \
"Strip non-directory suffix from FILENAME"
#define dirname_example_usage \
"$ dirname /tmp/foo\n" \
"/tmp\n" \
"$ dirname /tmp/foo/\n" \
"/tmp\n"
#define dmesg_trivial_usage \
"[-c] [-n LEVEL] [-s SIZE]"
#define dmesg_full_usage "\n\n" \
"Print or control the kernel ring buffer\n" \
"\nOptions:" \
"\n -c Clear ring buffer after printing" \
"\n -n LEVEL Set console logging level" \
"\n -s SIZE Buffer size" \
#define dnsd_trivial_usage \
"[-dvs] [-c CONFFILE] [-t TTL_SEC] [-p PORT] [-i ADDR]"
#define dnsd_full_usage "\n\n" \
"Small static DNS server daemon\n" \
"\nOptions:" \
"\n -c FILE Config file" \
"\n -t SEC TTL" \
"\n -p PORT Listen on PORT" \
"\n -i ADDR Listen on ADDR" \
"\n -d Daemonize" \
"\n -v Verbose" \
"\n -s Send successful replies only. Use this if you want" \
"\n to use /etc/resolv.conf with two nameserver lines:" \
"\n nameserver DNSD_SERVER" \
"\n nameserver NORNAL_DNS_SERVER" \
#define dos2unix_trivial_usage \
"[OPTIONS] [FILE]"
#define dos2unix_full_usage "\n\n" \
"Convert FILE in-place from DOS to Unix format.\n" \
"When no file is given, use stdin/stdout.\n" \
"\nOptions:" \
"\n -u dos2unix" \
"\n -d unix2dos" \
#define unix2dos_trivial_usage \
"[OPTIONS] [FILE]"
#define unix2dos_full_usage "\n\n" \
"Convert FILE in-place from Unix to DOS format.\n" \
"When no file is given, use stdin/stdout.\n" \
"\nOptions:" \
"\n -u dos2unix" \
"\n -d unix2dos" \
#define dpkg_trivial_usage \
"[-ilCPru] [-F OPT] PACKAGE"
#define dpkg_full_usage "\n\n" \
"Install, remove and manage Debian packages\n" \
"\nOptions:" \
IF_LONG_OPTS( \
"\n -i,--install Install the package" \
"\n -l,--list List of installed packages" \
"\n --configure Configure an unpackaged package" \
"\n -P,--purge Purge all files of a package" \
"\n -r,--remove Remove all but the configuration files for a package" \
"\n --unpack Unpack a package, but don't configure it" \
"\n --force-depends Ignore dependency problems" \
"\n --force-confnew Overwrite existing config files when installing" \
"\n --force-confold Keep old config files when installing" \
) \
IF_NOT_LONG_OPTS( \
"\n -i Install the package" \
"\n -l List of installed packages" \
"\n -C Configure an unpackaged package" \
"\n -P Purge all files of a package" \
"\n -r Remove all but the configuration files for a package" \
"\n -u Unpack a package, but don't configure it" \
"\n -F depends Ignore dependency problems" \
"\n -F confnew Overwrite existing config files when installing" \
"\n -F confold Keep old config files when installing" \
)
#define dpkg_deb_trivial_usage \
"[-cefxX] FILE [argument]"
#define dpkg_deb_full_usage "\n\n" \
"Perform actions on Debian packages (.debs)\n" \
"\nOptions:" \
"\n -c List contents of filesystem tree" \
"\n -e Extract control files to [argument] directory" \
"\n -f Display control field name starting with [argument]" \
"\n -x Extract packages filesystem tree to directory" \
"\n -X Verbose extract" \
#define dpkg_deb_example_usage \
"$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
#define du_trivial_usage \
"[-aHLdclsx" IF_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..."
#define du_full_usage "\n\n" \
"Summarize disk space used for each FILE and/or directory.\n" \
"Disk space is printed in units of " \
IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
IF_NOT_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
" bytes.\n" \
"\nOptions:" \
"\n -a Show file sizes too" \
"\n -L Follow all symlinks" \
"\n -H Follow symlinks on command line" \
"\n -d N Limit output to directories (and files with -a) of depth < N" \
"\n -c Show grand total" \
"\n -l Count sizes many times if hard linked" \
"\n -s Display only a total for each argument" \
"\n -x Skip directories on different filesystems" \
IF_FEATURE_HUMAN_READABLE( \
"\n -h Sizes in human readable format (e.g., 1K 243M 2G )" \
"\n -m Sizes in megabytes" \
) \
"\n -k Sizes in kilobytes" \
IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K(" (default)") \
#define du_example_usage \
"$ du\n" \
"16 ./CVS\n" \
"12 ./kernel-patches/CVS\n" \
"80 ./kernel-patches\n" \
"12 ./tests/CVS\n" \
"36 ./tests\n" \
"12 ./scripts/CVS\n" \
"16 ./scripts\n" \
"12 ./docs/CVS\n" \
"104 ./docs\n" \
"2417 .\n"
#define dumpkmap_trivial_usage \
"> keymap"
#define dumpkmap_full_usage "\n\n" \
"Print a binary keyboard translation table to stdout"
#define dumpkmap_example_usage \
"$ dumpkmap > keymap\n"
#define dumpleases_trivial_usage \
"[-r|-a] [-f LEASEFILE]"
#define dumpleases_full_usage "\n\n" \
"Display DHCP leases granted by udhcpd\n" \
"\nOptions:" \
IF_LONG_OPTS( \
"\n -f,--file=FILE Lease file" \
"\n -r,--remaining Show remaining time" \
"\n -a,--absolute Show expiration time" \
) \
IF_NOT_LONG_OPTS( \
"\n -f FILE Lease file" \
"\n -r Show remaining time" \
"\n -a Show expiration time" \
)
/*
#define e2fsck_trivial_usage \
"[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \
"[-I inode_buffer_blocks] [-P process_inode_size] " \
"[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
"[-E extended-options] device"
#define e2fsck_full_usage "\n\n" \
"Check ext2/ext3 file system\n" \
"\nOptions:" \
"\n -p Automatic repair (no questions)" \
"\n -n Make no changes to the filesystem" \
"\n -y Assume 'yes' to all questions" \
"\n -c Check for bad blocks and add them to the badblock list" \
"\n -f Force checking even if filesystem is marked clean" \
"\n -v Verbose" \
"\n -b superblock Use alternative superblock" \
"\n -B blocksize Force blocksize when looking for superblock" \
"\n -j journal Set location of the external journal" \
"\n -l file Add to badblocks list" \
"\n -L file Set badblocks list" \
*/
#define echo_trivial_usage \
IF_FEATURE_FANCY_ECHO("[-neE] ") "[ARG]..."
#define echo_full_usage "\n\n" \
"Print the specified ARGs to stdout" \
IF_FEATURE_FANCY_ECHO( "\n" \
"\nOptions:" \
"\n -n Suppress trailing newline" \
"\n -e Interpret backslash escapes (i.e., \\t=tab)" \
"\n -E Don't interpret backslash escapes (default)" \
)
#define echo_example_usage \
"$ echo \"Erik is cool\"\n" \
"Erik is cool\n" \
IF_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \
"Erik\n" \
"is\n" \
"cool\n" \
"$ echo \"Erik\\nis\\ncool\"\n" \
"Erik\\nis\\ncool\n")
#define eject_trivial_usage \
"[-t] [-T] [DEVICE]"
#define eject_full_usage "\n\n" \
"Eject DEVICE or default /dev/cdrom\n" \
"\nOptions:" \
IF_FEATURE_EJECT_SCSI( \
"\n -s SCSI device" \
) \
"\n -t Close tray" \
"\n -T Open/close tray (toggle)" \
#define ed_trivial_usage ""
#define ed_full_usage ""
#define env_trivial_usage \
"[-iu] [-] [name=value]... [PROG ARGS]"
#define env_full_usage "\n\n" \
"Print the current environment or run PROG after setting up\n" \
"the specified environment\n" \
"\nOptions:" \
"\n -, -i Start with an empty environment" \
"\n -u Remove variable from the environment" \
#define ether_wake_trivial_usage \
"[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
#define ether_wake_full_usage "\n\n" \
"Send a magic packet to wake up sleeping machines.\n" \
"MAC must be a station address (00:11:22:33:44:55) or\n" \
"a hostname with a known 'ethers' entry.\n" \
"\nOptions:" \
"\n -b Send wake-up packet to the broadcast address" \
"\n -i iface Interface to use (default eth0)" \
"\n -p pass Append four or six byte password PW to the packet" \
#define expand_trivial_usage \
"[-i] [-t N] [FILE]..."
#define expand_full_usage "\n\n" \
"Convert tabs to spaces, writing to stdout\n" \
"\nOptions:" \
IF_FEATURE_EXPAND_LONG_OPTIONS( \
"\n -i,--initial Don't convert tabs after non blanks" \
"\n -t,--tabs=N Tabstops every N chars" \
) \
IF_NOT_FEATURE_EXPAND_LONG_OPTIONS( \
"\n -i Don't convert tabs after non blanks" \
"\n -t Tabstops every N chars" \
)
#define expr_trivial_usage \
"EXPRESSION"
#define expr_full_usage "\n\n" \
"Print the value of EXPRESSION to stdout\n" \
"\n" \
"EXPRESSION may be:\n" \
" ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
" ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
" ARG1 < ARG2 1 if ARG1 is less than ARG2, else 0. Similarly:\n" \
" ARG1 <= ARG2\n" \
" ARG1 = ARG2\n" \
" ARG1 != ARG2\n" \
" ARG1 >= ARG2\n" \
" ARG1 > ARG2\n" \
" ARG1 + ARG2 Sum of ARG1 and ARG2. Similarly:\n" \
" ARG1 - ARG2\n" \
" ARG1 * ARG2\n" \
" ARG1 / ARG2\n" \
" ARG1 % ARG2\n" \
" STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \
" match STRING REGEXP Same as STRING : REGEXP\n" \
" substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \
" index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \
" length STRING Length of STRING\n" \
" quote TOKEN Interpret TOKEN as a string, even if\n" \
" it is a keyword like 'match' or an\n" \
" operator like '/'\n" \
" (EXPRESSION) Value of EXPRESSION\n" \
"\n" \
"Beware that many operators need to be escaped or quoted for shells.\n" \
"Comparisons are arithmetic if both ARGs are numbers, else\n" \
"lexicographical. Pattern matches return the string matched between\n" \
"\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \
"of characters matched or 0."
#define fakeidentd_trivial_usage \
"[-fiw] [-b ADDR] [STRING]"
#define fakeidentd_full_usage "\n\n" \
"Provide fake ident (auth) service\n" \
"\nOptions:" \
"\n -f Run in foreground" \
"\n -i Inetd mode" \
"\n -w Inetd 'wait' mode" \
"\n -b ADDR Bind to specified address" \
"\n STRING Ident answer string (default: nobody)" \
#define false_trivial_usage \
""
#define false_full_usage "\n\n" \
"Return an exit code of FALSE (1)"
#define false_example_usage \
"$ false\n" \
"$ echo $?\n" \
"1\n"
#define fbsplash_trivial_usage \
"-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]"
#define fbsplash_full_usage "\n\n" \
"Options:" \
"\n -s Image" \
"\n -c Hide cursor" \
"\n -d Framebuffer device (default /dev/fb0)" \
"\n -i Config file (var=value):" \
"\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \
"\n BAR_R,BAR_G,BAR_B" \
"\n -f Control pipe (else exit after drawing image)" \
"\n commands: 'NN' (% for progress bar) or 'exit'" \
#define fbset_trivial_usage \
"[OPTIONS] [MODE]"
#define fbset_full_usage "\n\n" \
"Show and modify frame buffer settings"
#define fbset_example_usage \
"$ fbset\n" \
"mode \"1024x768-76\"\n" \
" # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
" geometry 1024 768 1024 768 16\n" \
" timings 12714 128 32 16 4 128 4\n" \
" accel false\n" \
" rgba 5/11,6/5,5/0,0/0\n" \
"endmode\n"
#define fdflush_trivial_usage \
"DEVICE"
#define fdflush_full_usage "\n\n" \
"Force floppy disk drive to detect disk change"
#define fdformat_trivial_usage \
"[-n] DEVICE"
#define fdformat_full_usage "\n\n" \
"Format floppy disk\n" \
"\nOptions:" \
"\n -n Don't verify after format" \
/* Looks like someone forgot to add this to config system */
#ifndef ENABLE_FEATURE_FDISK_BLKSIZE
# define ENABLE_FEATURE_FDISK_BLKSIZE 0
# define IF_FEATURE_FDISK_BLKSIZE(a)
#endif
#define fdisk_trivial_usage \
"[-ul" IF_FEATURE_FDISK_BLKSIZE("s") "] " \
"[-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
#define fdisk_full_usage "\n\n" \
"Change partition table\n" \
"\nOptions:" \
"\n -u Start and End are in sectors (instead of cylinders)" \
"\n -l Show partition table for each DISK, then exit" \
IF_FEATURE_FDISK_BLKSIZE( \
"\n -s Show partition sizes in kb for each DISK, then exit" \
) \
"\n -b 2048 (for certain MO disks) use 2048-byte sectors" \
"\n -C CYLINDERS Set number of cylinders/heads/sectors" \
"\n -H HEADS" \
"\n -S SECTORS" \
#define fgconsole_trivial_usage \
""
#define fgconsole_full_usage "\n\n" \
"Get active console"
#define findfs_trivial_usage \
"LABEL=label or UUID=uuid"
#define findfs_full_usage "\n\n" \
"Find a filesystem device based on a label or UUID"
#define findfs_example_usage \
"$ findfs LABEL=MyDevice"
#define flash_lock_trivial_usage \
"MTD_DEVICE OFFSET SECTORS"
#define flash_lock_full_usage "\n\n" \
"Lock part or all of an MTD device. If SECTORS is -1, then all sectors\n" \
"will be locked, regardless of the value of OFFSET"
#define flash_unlock_trivial_usage \
"MTD_DEVICE"
#define flash_unlock_full_usage "\n\n" \
"Unlock an MTD device"
#define flash_eraseall_trivial_usage \
"[-jq] MTD_DEVICE"
#define flash_eraseall_full_usage "\n\n" \
"Erase an MTD device\n" \
"\nOptions:" \
"\n -j Format the device for jffs2" \
"\n -q Don't display progress messages" \
#define flashcp_trivial_usage \
"-v FILE MTD_DEVICE"
#define flashcp_full_usage "\n\n" \
"Copy an image to MTD device\n" \
"\nOptions:" \
"\n -v Verbose" \
#define flock_trivial_usage \
"[-sxun] FD|{FILE [-c] PROG ARGS}"
#define flock_full_usage "\n\n" \
"[Un]lock file descriptor, or lock FILE, run PROG\n" \
"\nOptions:" \
"\n -s Shared lock" \
"\n -x Exclusive lock (default)" \
"\n -u Unlock FD" \
"\n -n Fail rather than wait" \
#define fold_trivial_usage \
"[-bs] [-w WIDTH] [FILE]..."
#define fold_full_usage "\n\n" \
"Wrap input lines in each FILE (or stdin), writing to stdout\n" \
"\nOptions:" \
"\n -b Count bytes rather than columns" \
"\n -s Break at spaces" \
"\n -w Use WIDTH columns instead of 80" \
#define free_trivial_usage \
""
#define free_full_usage "\n\n" \
"Display the amount of free and used system memory"
#define free_example_usage \
"$ free\n" \
" total used free shared buffers\n" \
" Mem: 257628 248724 8904 59644 93124\n" \
" Swap: 128516 8404 120112\n" \
"Total: 386144 257128 129016\n" \
#define freeramdisk_trivial_usage \
"DEVICE"
#define freeramdisk_full_usage "\n\n" \
"Free all memory used by the specified ramdisk"
#define freeramdisk_example_usage \
"$ freeramdisk /dev/ram2\n"
#define fsck_trivial_usage \
"[-ANPRTV] [-C FD] [-t FSTYPE] [FS_OPTS] [BLOCKDEV]..."
#define fsck_full_usage "\n\n" \
"Check and repair filesystems\n" \
"\nOptions:" \
"\n -A Walk /etc/fstab and check all filesystems" \
"\n -N Don't execute, just show what would be done" \
"\n -P With -A, check filesystems in parallel" \
"\n -R With -A, skip the root filesystem" \
"\n -T Don't show title on startup" \
"\n -V Verbose" \
"\n -C n Write status information to specified filedescriptor" \
"\n -t TYPE List of filesystem types to check" \
#define fsck_minix_trivial_usage \
"[-larvsmf] BLOCKDEV"
#define fsck_minix_full_usage "\n\n" \
"Check MINIX filesystem\n" \
"\nOptions:" \
"\n -l List all filenames" \
"\n -r Perform interactive repairs" \
"\n -a Perform automatic repairs" \
"\n -v Verbose" \
"\n -s Output superblock information" \
"\n -m Show \"mode not cleared\" warnings" \
"\n -f Force file system check" \
#define ftpd_trivial_usage \
"[-wvS] [-t N] [-T N] [DIR]"
#define ftpd_full_usage "\n\n" \
"Anonymous FTP server\n" \
"\n" \
"ftpd should be used as an inetd service.\n" \
"ftpd's line for inetd.conf:\n" \
" 21 stream tcp nowait root ftpd ftpd /files/to/serve\n" \
"It also can be ran from tcpsvd:\n" \
" tcpsvd -vE 0.0.0.0 21 ftpd /files/to/serve\n" \
"\nOptions:" \
"\n -w Allow upload" \
"\n -v Log to stderr" \
"\n -S Log to syslog" \
"\n -t,-T Idle and absolute timeouts" \
"\n DIR Change root to this directory" \
#define ftpget_trivial_usage \
"[OPTIONS] HOST [LOCAL_FILE] REMOTE_FILE"
#define ftpget_full_usage "\n\n" \
"Retrieve a remote file via FTP\n" \
"\nOptions:" \
IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
"\n -c,--continue Continue previous transfer" \
"\n -v,--verbose Verbose" \
"\n -u,--username Username" \
"\n -p,--password Password" \
"\n -P,--port Port number" \
) \
IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
"\n -c Continue previous transfer" \
"\n -v Verbose" \
"\n -u Username" \
"\n -p Password" \
"\n -P Port number" \
)
#define ftpput_trivial_usage \
"[OPTIONS] HOST [REMOTE_FILE] LOCAL_FILE"
#define ftpput_full_usage "\n\n" \
"Store a local file on a remote machine via FTP\n" \
"\nOptions:" \
IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
"\n -v,--verbose Verbose" \
"\n -u,--username Username" \
"\n -p,--password Password" \
"\n -P,--port Port number" \
) \
IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
"\n -v Verbose" \
"\n -u Username" \
"\n -p Password" \
"\n -P Port number" \
)
#define fuser_trivial_usage \
"[OPTIONS] FILE or PORT/PROTO"
#define fuser_full_usage "\n\n" \
"Find processes which use FILEs or PORTs\n" \
"\nOptions:" \
"\n -m Find processes which use same fs as FILEs" \
"\n -4 Search only IPv4 space" \
"\n -6 Search only IPv6 space" \
"\n -s Don't display PIDs" \
"\n -k Kill found processes" \
"\n -SIGNAL Signal to send (default: KILL)" \
#define getenforce_trivial_usage NOUSAGE_STR
#define getenforce_full_usage ""
#define getopt_trivial_usage \
"[OPTIONS]"
#define getopt_full_usage "\n\n" \
"Options:" \
IF_LONG_OPTS( \
"\n -a,--alternative Allow long options starting with single -" \
"\n -l,--longoptions=longopts Long options to be recognized" \
"\n -n,--name=progname The name under which errors are reported" \
"\n -o,--options=optstring Short options to be recognized" \
"\n -q,--quiet Disable error reporting by getopt(3)" \
"\n -Q,--quiet-output No normal output" \
"\n -s,--shell=shell Set shell quoting conventions" \
"\n -T,--test Test for getopt(1) version" \
"\n -u,--unquoted Don't quote the output" \
) \
IF_NOT_LONG_OPTS( \
"\n -a Allow long options starting with single -" \
"\n -l longopts Long options to be recognized" \
"\n -n progname The name under which errors are reported" \
"\n -o optstring Short options to be recognized" \
"\n -q Disable error reporting by getopt(3)" \
"\n -Q No normal output" \
"\n -s shell Set shell quoting conventions" \
"\n -T Test for getopt(1) version" \
"\n -u Don't quote the output" \
)
#define getopt_example_usage \
"$ cat getopt.test\n" \
"#!/bin/sh\n" \
"GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
" -n 'example.busybox' -- \"$@\"`\n" \
"if [ $? != 0 ]; then exit 1; fi\n" \
"eval set -- \"$GETOPT\"\n" \
"while true; do\n" \
" case $1 in\n" \
" -a|--a-long) echo \"Option a\"; shift;;\n" \
" -b|--b-long) echo \"Option b, argument '$2'\"; shift 2;;\n" \
" -c|--c-long)\n" \
" case \"$2\" in\n" \
" \"\") echo \"Option c, no argument\"; shift 2;;\n" \
" *) echo \"Option c, argument '$2'\"; shift 2;;\n" \
" esac;;\n" \
" --) shift; break;;\n" \
" *) echo \"Internal error!\"; exit 1;;\n" \
" esac\n" \
"done\n"
#define getsebool_trivial_usage \
"-a or getsebool boolean..."
#define getsebool_full_usage "\n\n" \
" -a Show all selinux booleans"
#define getty_trivial_usage \
"[OPTIONS] BAUD_RATE TTY [TERMTYPE]"
#define getty_full_usage "\n\n" \
"Open a tty, prompt for a login name, then invoke /bin/login\n" \
"\nOptions:" \
"\n -h Enable hardware (RTS/CTS) flow control" \
"\n -i Don't display /etc/issue before running login" \
"\n -L Local line, don't do carrier detect" \
"\n -m Get baud rate from modem's CONNECT status message" \
"\n -w Wait for a CR or LF before sending /etc/issue" \
"\n -n Don't prompt the user for a login name" \
"\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \
"\n -l LOGIN Invoke LOGIN instead of /bin/login" \
"\n -t SEC Terminate after SEC if no username is read" \
"\n -I INITSTR Send INITSTR before anything else" \
"\n -H HOST Log HOST into the utmp file as the hostname" \
#define gunzip_trivial_usage \
"[OPTIONS] [FILE]..."
#define gunzip_full_usage "\n\n" \
"Decompress FILEs (or stdin)\n" \
"\nOptions:" \
"\n -c Write to stdout" \
"\n -f Force" \
"\n -t Test file integrity" \
#define gunzip_example_usage \
"$ ls -la /tmp/BusyBox*\n" \
"-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
"$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
"$ ls -la /tmp/BusyBox*\n" \
"-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
#define gzip_trivial_usage \
"[OPTIONS] [FILE]..."
#define gzip_full_usage "\n\n" \
"Compress FILEs (or stdin)\n" \
"\nOptions:" \
"\n -d Decompress" \
"\n -c Write to stdout" \
"\n -f Force" \
#define gzip_example_usage \
"$ ls -la /tmp/busybox*\n" \
"-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
"$ gzip /tmp/busybox.tar\n" \
"$ ls -la /tmp/busybox*\n" \
"-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
#define halt_trivial_usage \
"[-d DELAY] [-n] [-f]" IF_FEATURE_WTMP(" [-w]")
#define halt_full_usage "\n\n" \
"Halt the system\n" \
"\nOptions:" \
"\n -d Delay interval for halting" \
"\n -n No call to sync()" \
"\n -f Force halt (don't go through init)" \
IF_FEATURE_WTMP( \
"\n -w Only write a wtmp record" \
)
#define hdparm_trivial_usage \
"[OPTIONS] [DEVICE]"
#define hdparm_full_usage "\n\n" \
"Options:" \
"\n -a Get/set fs readahead" \
"\n -A Set drive read-lookahead flag (0/1)" \
"\n -b Get/set bus state (0 == off, 1 == on, 2 == tristate)" \
"\n -B Set Advanced Power Management setting (1-255)" \
"\n -c Get/set IDE 32-bit IO setting" \
"\n -C Check IDE power mode status" \
IF_FEATURE_HDPARM_HDIO_GETSET_DMA( \
"\n -d Get/set using_dma flag") \
"\n -D Enable/disable drive defect-mgmt" \
"\n -f Flush buffer cache for device on exit" \
"\n -g Display drive geometry" \
"\n -h Display terse usage information" \
IF_FEATURE_HDPARM_GET_IDENTITY( \
"\n -i Display drive identification") \
IF_FEATURE_HDPARM_GET_IDENTITY( \
"\n -I Detailed/current information directly from drive") \
"\n -k Get/set keep_settings_over_reset flag (0/1)" \
"\n -K Set drive keep_features_over_reset flag (0/1)" \
"\n -L Set drive doorlock (0/1) (removable harddisks only)" \
"\n -m Get/set multiple sector count" \
"\n -n Get/set ignore-write-errors flag (0/1)" \
"\n -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)" \
"\n -P Set drive prefetch count" \
/* "\n -q Change next setting quietly" - not supported ib bbox */ \
"\n -Q Get/set DMA tagged-queuing depth (if supported)" \
"\n -r Get/set readonly flag (DANGEROUS to set)" \
IF_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
"\n -R Register an IDE interface (DANGEROUS)") \
"\n -S Set standby (spindown) timeout" \
"\n -t Perform device read timings" \
"\n -T Perform cache read timings" \
"\n -u Get/set unmaskirq flag (0/1)" \
IF_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
"\n -U Unregister an IDE interface (DANGEROUS)") \
"\n -v Defaults; same as -mcudkrag for IDE drives" \
"\n -V Display program version and exit immediately" \
IF_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
"\n -w Perform device reset (DANGEROUS)") \
"\n -W Set drive write-caching flag (0/1) (DANGEROUS)" \
IF_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
"\n -x Tristate device for hotswap (0/1) (DANGEROUS)") \
"\n -X Set IDE xfer mode (DANGEROUS)" \
"\n -y Put IDE drive in standby mode" \
"\n -Y Put IDE drive to sleep" \
"\n -Z Disable Seagate auto-powersaving mode" \
"\n -z Reread partition table" \
#define head_trivial_usage \
"[OPTIONS] [FILE]..."
#define head_full_usage "\n\n" \
"Print first 10 lines of each FILE (or stdin) to stdout.\n" \
"With more than one FILE, precede each with a filename header.\n" \
"\nOptions:" \
"\n -n N[kbm] Print first N lines" \
IF_FEATURE_FANCY_HEAD( \
"\n -c N[kbm] Print first N bytes" \
"\n -q Never print headers" \
"\n -v Always print headers" \
) \
"\n" \
"\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
#define head_example_usage \
"$ head -n 2 /etc/passwd\n" \
"root:x:0:0:root:/root:/bin/bash\n" \
"daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
#define tail_trivial_usage \
"[OPTIONS] [FILE]..."
#define tail_full_usage "\n\n" \
"Print last 10 lines of each FILE (or stdin) to stdout.\n" \
"With more than one FILE, precede each with a filename header.\n" \
"\nOptions:" \
"\n -f Print data as file grows" \
IF_FEATURE_FANCY_TAIL( \
"\n -s SECONDS Wait SECONDS between reads with -f" \
) \
"\n -n N[kbm] Print last N lines" \
IF_FEATURE_FANCY_TAIL( \
"\n -c N[kbm] Print last N bytes" \
"\n -q Never print headers" \
"\n -v Always print headers" \
"\n" \
"\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
"\nIf N starts with a '+', output begins with the Nth item from the start" \
"\nof each file, not from the end." \
) \
#define tail_example_usage \
"$ tail -n 1 /etc/resolv.conf\n" \
"nameserver 10.0.0.1\n"
#define hexdump_trivial_usage \
"[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] [FILE]..."
#define hexdump_full_usage "\n\n" \
"Display FILEs (or stdin) in a user specified format\n" \
"\nOptions:" \
"\n -b One-byte octal display" \
"\n -c One-byte character display" \
"\n -C Canonical hex+ASCII, 16 bytes per line" \
"\n -d Two-byte decimal display" \
"\n -e FORMAT STRING" \
"\n -f FORMAT FILE" \
"\n -n LENGTH Interpret only LENGTH bytes of input" \
"\n -o Two-byte octal display" \
"\n -s OFFSET Skip OFFSET bytes" \
"\n -v Display all input data" \
"\n -x Two-byte hexadecimal display" \
IF_FEATURE_HEXDUMP_REVERSE( \
"\n -R Reverse of 'hexdump -Cv'") \
#define hd_trivial_usage \
"FILE..."
#define hd_full_usage "\n\n" \
"hd is an alias for hexdump -C"
#define hostid_trivial_usage \
""
#define hostid_full_usage "\n\n" \
"Print out a unique 32-bit identifier for the machine"
#define hostname_trivial_usage \
"[OPTIONS] [HOSTNAME | -F FILE]"
#define hostname_full_usage "\n\n" \
"Get or set hostname or DNS domain name\n" \
"\nOptions:" \
"\n -s Short" \
"\n -i Addresses for the hostname" \
"\n -d DNS domain name" \
"\n -f Fully qualified domain name" \
"\n -F FILE Use FILE's content as hostname" \
#define hostname_example_usage \
"$ hostname\n" \
"sage\n"
#define dnsdomainname_trivial_usage NOUSAGE_STR
#define dnsdomainname_full_usage ""
#define httpd_trivial_usage \
"[-ifv[v]]" \
" [-c CONFFILE]" \
" [-p [IP:]PORT]" \
IF_FEATURE_HTTPD_SETUID(" [-u USER[:GRP]]") \
IF_FEATURE_HTTPD_BASIC_AUTH(" [-r REALM]") \
" [-h HOME]\n" \
"or httpd -d/-e" IF_FEATURE_HTTPD_AUTH_MD5("/-m") " STRING"
#define httpd_full_usage "\n\n" \
"Listen for incoming HTTP requests\n" \
"\nOptions:" \
"\n -i Inetd mode" \
"\n -f Don't daemonize" \
"\n -v[v] Verbose" \
"\n -p [IP:]PORT Bind to ip:port (default *:80)" \
IF_FEATURE_HTTPD_SETUID( \
"\n -u USER[:GRP] Set uid/gid after binding to port") \
IF_FEATURE_HTTPD_BASIC_AUTH( \
"\n -r REALM Authentication Realm for Basic Authentication") \
"\n -h HOME Home directory (default .)" \
"\n -c FILE Configuration file (default {/etc,HOME}/httpd.conf)" \
IF_FEATURE_HTTPD_AUTH_MD5( \
"\n -m STRING MD5 crypt STRING") \
"\n -e STRING HTML encode STRING" \
"\n -d STRING URL decode STRING" \
#define hwclock_trivial_usage \
IF_FEATURE_HWCLOCK_LONG_OPTIONS( \
"[-r|--show] [-s|--hctosys] [-w|--systohc]" \
" [-l|--localtime] [-u|--utc]" \
" [-f FILE]" \
) \
IF_NOT_FEATURE_HWCLOCK_LONG_OPTIONS( \
"[-r] [-s] [-w] [-l] [-u] [-f FILE]" \
)
#define hwclock_full_usage "\n\n" \
"Query and set hardware clock (RTC)\n" \
"\nOptions:" \
"\n -r Show hardware clock time" \
"\n -s Set system time from hardware clock" \
"\n -w Set hardware clock to system time" \
"\n -u Hardware clock is in UTC" \
"\n -l Hardware clock is in local time" \
"\n -f FILE Use specified device (e.g. /dev/rtc2)" \
#define id_trivial_usage \
"[OPTIONS] [USER]"
#define id_full_usage "\n\n" \
"Print information about USER or the current user\n" \
"\nOptions:" \
IF_SELINUX( \
"\n -Z Print the security context" \
) \
"\n -u Print user ID" \
"\n -g Print group ID" \
"\n -G Print supplementary group IDs" \
"\n -n Print name instead of a number" \
"\n -r Print real user ID instead of effective ID" \
#define id_example_usage \
"$ id\n" \
"uid=1000(andersen) gid=1000(andersen)\n"
#define ifconfig_trivial_usage \
IF_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]"
#define ifconfig_full_usage "\n\n" \
"Configure a network interface\n" \
"\nOptions:" \
"\n" \
IF_FEATURE_IPV6( \
" [add ADDRESS[/PREFIXLEN]]\n") \
IF_FEATURE_IPV6( \
" [del ADDRESS[/PREFIXLEN]]\n") \
" [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n" \
" [netmask ADDRESS] [dstaddr ADDRESS]\n" \
IF_FEATURE_IFCONFIG_SLIP( \
" [outfill NN] [keepalive NN]\n") \
" " IF_FEATURE_IFCONFIG_HW("[hw ether" IF_FEATURE_HWIB("|infiniband")" ADDRESS] ") "[metric NN] [mtu NN]\n" \
" [[-]trailers] [[-]arp] [[-]allmulti]\n" \
" [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n" \
IF_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \
" [mem_start NN] [io_addr NN] [irq NN]\n") \
" [up|down] ..."
#define ifenslave_trivial_usage \
"[-cdf] MASTER_IFACE SLAVE_IFACE..."
#define ifenslave_full_usage "\n\n" \
"Configure network interfaces for parallel routing\n" \
"\nOptions:" \
"\n -c, --change-active Change active slave" \
"\n -d, --detach Remove slave interface from bonding device" \
"\n -f, --force Force, even if interface is not Ethernet" \
/* "\n -r, --receive-slave Create a receive-only slave" */
#define ifenslave_example_usage \
"To create a bond device, simply follow these three steps:\n" \
"- ensure that the required drivers are properly loaded:\n" \
" # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n" \
"- assign an IP address to the bond device:\n" \
" # ifconfig bond0 <addr> netmask <mask> broadcast <bcast>\n" \
"- attach all the interfaces you need to the bond device:\n" \
" # ifenslave bond0 eth0 eth1 eth2\n" \
" If bond0 didn't have a MAC address, it will take eth0's. Then, all\n" \
" interfaces attached AFTER this assignment will get the same MAC addr.\n\n" \
" To detach a dead interface without setting the bond device down:\n" \
" # ifenslave -d bond0 eth1\n\n" \
" To set the bond device down and automatically release all the slaves:\n" \
" # ifconfig bond0 down\n\n" \
" To change active slave:\n" \
" # ifenslave -c bond0 eth0\n" \
#define ifplugd_trivial_usage \
"[OPTIONS]"
#define ifplugd_full_usage "\n\n" \
"Network interface plug detection daemon\n" \
"\nOptions:" \
"\n -n Don't daemonize" \
"\n -s Don't log to syslog" \
"\n -i IFACE Interface" \
"\n -f/-F Treat link detection error as link down/link up" \
"\n (otherwise exit on error)" \
"\n -a Don't up interface at each link probe" \
"\n -M Monitor creation/destruction of interface" \
"\n (otherwise it must exist)" \
"\n -r PROG Script to run" \
"\n -x ARG Extra argument for script" \
"\n -I Don't exit on nonzero exit code from script" \
"\n -p Don't run script on daemon startup" \
"\n -q Don't run script on daemon quit" \
"\n -l Run script on startup even if no cable is detected" \
"\n -t SECS Poll time in seconds" \
"\n -u SECS Delay before running script after link up" \
"\n -d SECS Delay after link down" \
"\n -m MODE API mode (mii, priv, ethtool, wlan, iff, auto)" \
"\n -k Kill running daemon" \
#define ifup_trivial_usage \
"[-ain"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] IFACE..."
#define ifup_full_usage "\n\n" \
"Options:" \
"\n -a De/configure all interfaces automatically" \
"\n -i FILE Use FILE for interface definitions" \
"\n -n Print out what would happen, but don't do it" \
IF_FEATURE_IFUPDOWN_MAPPING( \
"\n (note: doesn't disable mappings)" \
"\n -m Don't run any mappings" \
) \
"\n -v Print out what would happen before doing it" \
"\n -f Force de/configuration" \
#define ifdown_trivial_usage \
"[-ain"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] ifaces..."
#define ifdown_full_usage "\n\n" \
"Options:" \
"\n -a De/configure all interfaces automatically" \
"\n -i FILE Use FILE for interface definitions" \
"\n -n Print out what would happen, but don't do it" \
IF_FEATURE_IFUPDOWN_MAPPING( \
"\n (note: doesn't disable mappings)" \
"\n -m Don't run any mappings" \
) \
"\n -v Print out what would happen before doing it" \
"\n -f Force de/configuration" \
#define inetd_trivial_usage \
"[-fe] [-q N] [-R N] [CONFFILE]"
#define inetd_full_usage "\n\n" \
"Listen for network connections and launch programs\n" \
"\nOptions:" \
"\n -f Run in foreground" \
"\n -e Log to stderr" \
"\n -q N Socket listen queue (default: 128)" \
"\n -R N Pause services after N connects/min" \
"\n (default: 0 - disabled)" \
#define init_trivial_usage \
""
#define init_full_usage "\n\n" \
"Init is the parent of all processes"
#define init_notes_usage \
"This version of init is designed to be run only by the kernel.\n" \
"\n" \
"BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \
"the /etc/inittab file is completely ignored by BusyBox init. If you want\n" \
"runlevels, use sysvinit.\n" \
"\n" \
"BusyBox init works just fine without an inittab. If no inittab is found,\n" \
"it has the following default behavior:\n" \
"\n" \
" ::sysinit:/etc/init.d/rcS\n" \
" ::askfirst:/bin/sh\n" \
" ::ctrlaltdel:/sbin/reboot\n" \
" ::shutdown:/sbin/swapoff -a\n" \
" ::shutdown:/bin/umount -a -r\n" \
" ::restart:/sbin/init\n" \
"\n" \
"if it detects that /dev/console is _not_ a serial console, it will also run:\n" \
"\n" \
" tty2::askfirst:/bin/sh\n" \
" tty3::askfirst:/bin/sh\n" \
" tty4::askfirst:/bin/sh\n" \
"\n" \
"If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \
"\n" \
" <id>:<runlevels>:<action>:<process>\n" \
"\n" \
" <id>:\n" \
"\n" \
" WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
" The id field is used by BusyBox init to specify the controlling tty for\n" \
" the specified process to run on. The contents of this field are\n" \
" appended to \"/dev/\" and used as-is. There is no need for this field to\n" \
" be unique, although if it isn't you may have strange results. If this\n" \
" field is left blank, the controlling tty is set to the console. Also\n" \
" note that if BusyBox detects that a serial console is in use, then only\n" \
" entries whose controlling tty is either the serial console or /dev/null\n" \
" will be run. BusyBox init does nothing with utmp. We don't need no\n" \
" stinkin' utmp.\n" \
"\n" \
" <runlevels>:\n" \
"\n" \
" The runlevels field is completely ignored.\n" \
"\n" \
" <action>:\n" \
"\n" \
" Valid actions include: sysinit, respawn, askfirst, wait,\n" \
" once, restart, ctrlaltdel, and shutdown.\n" \
"\n" \
" The available actions can be classified into two groups: actions\n" \
" that are run only once, and actions that are re-run when the specified\n" \
" process exits.\n" \
"\n" \
" Run only-once actions:\n" \
"\n" \
" 'sysinit' is the first item run on boot. init waits until all\n" \
" sysinit actions are completed before continuing. Following the\n" \
" completion of all sysinit actions, all 'wait' actions are run.\n" \
" 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
" the specified task completes. 'once' actions are asynchronous,\n" \
" therefore, init does not wait for them to complete. 'restart' is\n" \
" the action taken to restart the init process. By default this should\n" \
" simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
" can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
" actions are run when the system detects that someone on the system\n" \
" console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
" wants to run 'reboot' at this point to cause the system to reboot.\n" \
" Finally the 'shutdown' action specifies the actions to taken when\n" \
" init is told to reboot. Unmounting filesystems and disabling swap\n" \
" is a very good here.\n" \
"\n" \
" Run repeatedly actions:\n" \
"\n" \
" 'respawn' actions are run after the 'once' actions. When a process\n" \
" started with a 'respawn' action exits, init automatically restarts\n" \
" it. Unlike sysvinit, BusyBox init does not stop processes from\n" \
" respawning out of control. The 'askfirst' actions acts just like\n" \
" respawn, except that before running the specified process it\n" \
" displays the line \"Please press Enter to activate this console.\"\n" \
" and then waits for the user to press enter before starting the\n" \
" specified process.\n" \
"\n" \
" Unrecognized actions (like initdefault) will cause init to emit an\n" \
" error message, and then go along with its business. All actions are\n" \
" run in the order they appear in /etc/inittab.\n" \
"\n" \
" <process>:\n" \
"\n" \
" Specifies the process to be executed and its command line.\n" \
"\n" \
"Example /etc/inittab file:\n" \
"\n" \
" # This is run first except when booting in single-user mode\n" \
" #\n" \
" ::sysinit:/etc/init.d/rcS\n" \
" \n" \
" # /bin/sh invocations on selected ttys\n" \
" #\n" \
" # Start an \"askfirst\" shell on the console (whatever that may be)\n" \
" ::askfirst:-/bin/sh\n" \
" # Start an \"askfirst\" shell on /dev/tty2-4\n" \
" tty2::askfirst:-/bin/sh\n" \
" tty3::askfirst:-/bin/sh\n" \
" tty4::askfirst:-/bin/sh\n" \
" \n" \
" # /sbin/getty invocations for selected ttys\n" \
" #\n" \
" tty4::respawn:/sbin/getty 38400 tty4\n" \
" tty5::respawn:/sbin/getty 38400 tty5\n" \
" \n" \
" \n" \
" # Example of how to put a getty on a serial line (for a terminal)\n" \
" #\n" \
" #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \
" #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \
" #\n" \
" # Example how to put a getty on a modem line\n" \
" #::respawn:/sbin/getty 57600 ttyS2\n" \
" \n" \
" # Stuff to do when restarting the init process\n" \
" ::restart:/sbin/init\n" \
" \n" \
" # Stuff to do before rebooting\n" \
" ::ctrlaltdel:/sbin/reboot\n" \
" ::shutdown:/bin/umount -a -r\n" \
" ::shutdown:/sbin/swapoff -a\n"
#define inotifyd_trivial_usage \
"PROG FILE1[:MASK]..."
#define inotifyd_full_usage "\n\n" \
"Run PROG on filesystem changes." \
"\nWhen a filesystem event matching MASK occurs on FILEn," \
"\nPROG ACTUAL_EVENTS FILEn [SUBFILE] is run." \
"\nEvents:" \
"\n a File is accessed" \
"\n c File is modified" \
"\n e Metadata changed" \
"\n w Writable file is closed" \
"\n 0 Unwritable file is closed" \
"\n r File is opened" \
"\n D File is deleted" \
"\n M File is moved" \
"\n u Backing fs is unmounted" \
"\n o Event queue overflowed" \
"\n x File can't be watched anymore" \
"\nIf watching a directory:" \
"\n m Subfile is moved into dir" \
"\n y Subfile is moved out of dir" \
"\n n Subfile is created" \
"\n d Subfile is deleted" \
"\n" \
"\ninotifyd waits for PROG to exit." \
"\nWhen x event happens for all FILEs, inotifyd exits." \
/* -v, -b, -c are ignored */
#define install_trivial_usage \
"[-cdDsp] [-o USER] [-g GRP] [-m MODE] [SOURCE]... DEST"
#define install_full_usage "\n\n" \
"Copy files and set attributes\n" \
"\nOptions:" \
"\n -c Just copy (default)" \
"\n -d Create directories" \
"\n -D Create leading target directories" \
"\n -s Strip symbol table" \
"\n -p Preserve date" \
"\n -o USER Set ownership" \
"\n -g GRP Set group ownership" \
"\n -m MODE Set permissions" \
IF_SELINUX( \
"\n -Z Set security context" \
)
/* would need to make the " | " optional depending on more than one selected: */
#define ip_trivial_usage \
"[OPTIONS] {" \
IF_FEATURE_IP_ADDRESS("address | ") \
IF_FEATURE_IP_ROUTE("route | ") \
IF_FEATURE_IP_LINK("link | ") \
IF_FEATURE_IP_TUNNEL("tunnel | ") \
IF_FEATURE_IP_RULE("rule") \
"} {COMMAND}"
#define ip_full_usage "\n\n" \
"ip [OPTIONS] OBJECT {COMMAND}\n" \
"where OBJECT := {" \
IF_FEATURE_IP_ADDRESS("address | ") \
IF_FEATURE_IP_ROUTE("route | ") \
IF_FEATURE_IP_LINK("link | ") \
IF_FEATURE_IP_TUNNEL("tunnel | ") \
IF_FEATURE_IP_RULE("rule") \
"}\n" \
"OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" \
#define ipaddr_trivial_usage \
"{ {add|del} IFADDR dev STRING | {show|flush}\n" \
" [dev STRING] [to PREFIX] }"
#define ipaddr_full_usage "\n\n" \
"ipaddr {add|delete} IFADDR dev STRING\n" \
"ipaddr {show|flush} [dev STRING] [scope SCOPE-ID]\n" \
" [to PREFIX] [label PATTERN]\n" \
" IFADDR := PREFIX | ADDR peer PREFIX\n" \
" [broadcast ADDR] [anycast ADDR]\n" \
" [label STRING] [scope SCOPE-ID]\n" \
" SCOPE-ID := [host | link | global | NUMBER]" \
#define ipcalc_trivial_usage \
"[OPTIONS] ADDRESS[[/]NETMASK] [NETMASK]"
#define ipcalc_full_usage "\n\n" \
"Calculate IP network settings from a IP address\n" \
"\nOptions:" \
IF_FEATURE_IPCALC_LONG_OPTIONS( \
"\n -b,--broadcast Display calculated broadcast address" \
"\n -n,--network Display calculated network address" \
"\n -m,--netmask Display default netmask for IP" \
IF_FEATURE_IPCALC_FANCY( \
"\n -p,--prefix Display the prefix for IP/NETMASK" \
"\n -h,--hostname Display first resolved host name" \
"\n -s,--silent Don't ever display error messages" \
) \
) \
IF_NOT_FEATURE_IPCALC_LONG_OPTIONS( \
"\n -b Display calculated broadcast address" \
"\n -n Display calculated network address" \
"\n -m Display default netmask for IP" \
IF_FEATURE_IPCALC_FANCY( \
"\n -p Display the prefix for IP/NETMASK" \
"\n -h Display first resolved host name" \
"\n -s Don't ever display error messages" \
) \
)
#define ipcrm_trivial_usage \
"[-MQS key] [-mqs id]"
#define ipcrm_full_usage "\n\n" \
"Upper-case options MQS remove an object by shmkey value.\n" \
"Lower-case options remove an object by shmid value.\n" \
"\nOptions:" \
"\n -mM Remove memory segment after last detach" \
"\n -qQ Remove message queue" \
"\n -sS Remove semaphore" \
#define ipcs_trivial_usage \
"[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
#define ipcs_full_usage "\n\n" \
" -i Show specific resource" \
"\nResource specification:" \
"\n -m Shared memory segments" \
"\n -q Message queues" \
"\n -s Semaphore arrays" \
"\n -a All (default)" \
"\nOutput format:" \
"\n -t Time" \
"\n -c Creator" \
"\n -p Pid" \
"\n -l Limits" \
"\n -u Summary" \
#define iplink_trivial_usage \
"{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }"
#define iplink_full_usage "\n\n" \
"iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \
" dynamic { on | off } |\n" \
" mtu MTU }\n" \
"iplink show [DEVICE]" \
#define iproute_trivial_usage \
"{ list | flush | { add | del | change | append |\n" \
" replace | monitor } ROUTE }"
#define iproute_full_usage "\n\n" \
"iproute { list | flush } SELECTOR\n" \
"iproute get ADDRESS [from ADDRESS iif STRING]\n" \
" [oif STRING] [tos TOS]\n" \
"iproute { add | del | change | append | replace | monitor } ROUTE\n" \
" SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \
" ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]\n" \
" [metric METRIC]" \
#define iprule_trivial_usage \
"{[list | add | del] RULE}"
#define iprule_full_usage "\n\n" \
"iprule [list | add | del] SELECTOR ACTION\n" \
" SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK]\n" \
" [dev STRING] [pref NUMBER]\n" \
" ACTION := [table TABLE_ID] [nat ADDRESS]\n" \
" [prohibit | reject | unreachable]\n" \
" [realms [SRCREALM/]DSTREALM]\n" \
" TABLE_ID := [local | main | default | NUMBER]" \
#define iptunnel_trivial_usage \
"{ add | change | del | show } [NAME]\n" \
" [mode { ipip | gre | sit }]\n" \
" [remote ADDR] [local ADDR] [ttl TTL]"
#define iptunnel_full_usage "\n\n" \
"iptunnel { add | change | del | show } [NAME]\n" \
" [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \
" [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \
" [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" \
#define kbd_mode_trivial_usage \
"[-a|k|s|u] [-C TTY]"
#define kbd_mode_full_usage "\n\n" \
"Report or set the keyboard mode\n" \
"\nOptions:" \
"\n -a Default (ASCII)" \
"\n -k Medium-raw (keyboard)" \
"\n -s Raw (scancode)" \
"\n -u Unicode (utf-8)" \
"\n -C TTY Affect TTY instead of /dev/tty" \
#define kill_trivial_usage \
"[-l] [-SIG] PID..."
#define kill_full_usage "\n\n" \
"Send a signal (default: TERM) to given PIDs\n" \
"\nOptions:" \
"\n -l List all signal names and numbers" \
/* "\n -s SIG Yet another way of specifying SIG" */ \
#define kill_example_usage \
"$ ps | grep apache\n" \
"252 root root S [apache]\n" \
"263 www-data www-data S [apache]\n" \
"264 www-data www-data S [apache]\n" \
"265 www-data www-data S [apache]\n" \
"266 www-data www-data S [apache]\n" \
"267 www-data www-data S [apache]\n" \
"$ kill 252\n"
#define killall_trivial_usage \
"[-l] [-q] [-SIG] PROCESS_NAME..."
#define killall_full_usage "\n\n" \
"Send a signal (default: TERM) to given processes\n" \
"\nOptions:" \
"\n -l List all signal names and numbers" \
/* "\n -s SIG Yet another way of specifying SIG" */ \
"\n -q Don't complain if no processes were killed" \
#define killall_example_usage \
"$ killall apache\n"
#define killall5_trivial_usage \
"[-l] [-SIG] [-o PID]..."
#define killall5_full_usage "\n\n" \
"Send a signal (default: TERM) to all processes outside current session\n" \
"\nOptions:" \
"\n -l List all signal names and numbers" \
"\n -o PID Don't signal this PID" \
/* "\n -s SIG Yet another way of specifying SIG" */ \
#define klogd_trivial_usage \
"[-c N] [-n]"
#define klogd_full_usage "\n\n" \
"Kernel logger\n" \
"\nOptions:" \
"\n -c N Only messages with level < N are printed to console" \
"\n -n Run in foreground" \
#define length_trivial_usage \
"STRING"
#define length_full_usage "\n\n" \
"Print STRING's length"
#define length_example_usage \
"$ length Hello\n" \
"5\n"
#define less_trivial_usage \
"[-EMNmh~I?] [FILE]..."
#define less_full_usage "\n\n" \
"View FILE (or stdin) one screenful at a time\n" \
"\nOptions:" \
"\n -E Quit once the end of a file is reached" \
"\n -M,-m Display status line with line numbers" \
"\n and percentage through the file" \
"\n -N Prefix line number to each line" \
"\n -I Ignore case in all searches" \
"\n -~ Suppress ~s displayed past the end of the file" \
#define linux32_trivial_usage NOUSAGE_STR
#define linux32_full_usage ""
#define linux64_trivial_usage NOUSAGE_STR
#define linux64_full_usage ""
#define linuxrc_trivial_usage NOUSAGE_STR
#define linuxrc_full_usage ""
#define setarch_trivial_usage \
"personality PROG ARGS"
#define setarch_full_usage "\n\n" \
"Personality may be:\n" \
" linux32 Set 32bit uname emulation\n" \
" linux64 Set 64bit uname emulation" \
#define ln_trivial_usage \
"[OPTIONS] TARGET... LINK|DIR"
#define ln_full_usage "\n\n" \
"Create a link LINK or DIR/TARGET to the specified TARGET(s)\n" \
"\nOptions:" \
"\n -s Make symlinks instead of hardlinks" \
"\n -f Remove existing destinations" \
"\n -n Don't dereference symlinks - treat like normal file" \
"\n -b Make a backup of the target (if exists) before link operation" \
"\n -S suf Use suffix instead of ~ when making backup files" \
#define ln_example_usage \
"$ ln -s BusyBox /tmp/ls\n" \
"$ ls -l /tmp/ls\n" \
"lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
#define load_policy_trivial_usage NOUSAGE_STR
#define load_policy_full_usage ""
#define loadfont_trivial_usage \
"< font"
#define loadfont_full_usage "\n\n" \
"Load a console font from stdin" \
/* "\n -C TTY Affect TTY instead of /dev/tty" */ \
#define loadfont_example_usage \
"$ loadfont < /etc/i18n/fontname\n"
#define loadkmap_trivial_usage \
"< keymap"
#define loadkmap_full_usage "\n\n" \
"Load a binary keyboard translation table from stdin\n" \
/* "\n -C TTY Affect TTY instead of /dev/tty" */ \
#define loadkmap_example_usage \
"$ loadkmap < /etc/i18n/lang-keymap\n"
#define logger_trivial_usage \
"[OPTIONS] [MESSAGE]"
#define logger_full_usage "\n\n" \
"Write MESSAGE (or stdin) to syslog\n" \
"\nOptions:" \
"\n -s Log to stderr as well as the system log" \
"\n -t TAG Log using the specified tag (defaults to user name)" \
"\n -p PRIO Priority (numeric or facility.level pair)" \
#define logger_example_usage \
"$ logger \"hello\"\n"
#define login_trivial_usage \
"[-p] [-h HOST] [[-f] USER]"
#define login_full_usage "\n\n" \
"Begin a new session on the system\n" \
"\nOptions:" \
"\n -f Don't authenticate (user already authenticated)" \
"\n -h Name of the remote host" \
"\n -p Preserve environment" \
#define logname_trivial_usage \
""
#define logname_full_usage "\n\n" \
"Print the name of the current user"
#define logname_example_usage \
"$ logname\n" \
"root\n"
#define logread_trivial_usage \
"[OPTIONS]"
#define logread_full_usage "\n\n" \
"Show messages in syslogd's circular buffer\n" \
"\nOptions:" \
"\n -f Output data as log grows" \
#define losetup_trivial_usage \
"[-o OFS] LOOPDEV FILE - associate loop devices\n" \
" losetup -d LOOPDEV - disassociate\n" \
" losetup [-f] - show"
#define losetup_full_usage "\n\n" \
"Options:" \
"\n -o OFS Start OFS bytes into FILE" \
"\n -f Show first free loop device" \
#define losetup_notes_usage \
"No arguments will display all current associations.\n" \
"One argument (losetup /dev/loop1) will display the current association\n" \
"(if any), or disassociate it (with -d). The display shows the offset\n" \
"and filename of the file the loop device is currently bound to.\n\n" \
"Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \
"with an optional offset (-o 12345). Encryption is not yet supported.\n" \
"losetup -f will show the first loop free loop device\n\n"
#define lpd_trivial_usage \
"SPOOLDIR [HELPER [ARGS]]"
#define lpd_full_usage "\n\n" \
"SPOOLDIR must contain (symlinks to) device nodes or directories" \
"\nwith names matching print queue names. In the first case, jobs are" \
"\nsent directly to the device. Otherwise each job is stored in queue" \
"\ndirectory and HELPER program is called. Name of file to print" \
"\nis passed in $DATAFILE variable." \
"\nExample:" \
"\n tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print" \
#define lpq_trivial_usage \
"[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID]... [-fs]"
#define lpq_full_usage "\n\n" \
"Options:" \
"\n -P lp service to connect to (else uses $PRINTER)" \
"\n -d Delete jobs" \
"\n -f Force any waiting job to be printed" \
"\n -s Short display" \
#define lpr_trivial_usage \
"-P queue[@host[:port]] -U USERNAME -J TITLE -Vmh [FILE]..."
/* -C CLASS exists too, not shown.
* CLASS is supposed to be printed on banner page, if one is requested */
#define lpr_full_usage "\n\n" \
"Options:" \
"\n -P lp service to connect to (else uses $PRINTER)"\
"\n -m Send mail on completion" \
"\n -h Print banner page too" \
"\n -V Verbose" \
#define ls_trivial_usage \
"[-1Aa" IF_FEATURE_LS_TIMESTAMPS("c") "Cd" \
IF_FEATURE_LS_TIMESTAMPS("e") IF_FEATURE_LS_FILETYPES("F") "iln" \
IF_FEATURE_LS_FILETYPES("p") IF_FEATURE_LS_FOLLOWLINKS("L") \
IF_FEATURE_LS_RECURSIVE("R") IF_FEATURE_LS_SORTFILES("rS") "s" \
IF_FEATURE_AUTOWIDTH("T") IF_FEATURE_LS_TIMESTAMPS("tu") \
IF_FEATURE_LS_SORTFILES("v") IF_FEATURE_AUTOWIDTH("w") "x" \
IF_FEATURE_LS_SORTFILES("X") IF_FEATURE_HUMAN_READABLE("h") "k" \
IF_SELINUX("K") "] [FILE]..."
#define ls_full_usage "\n\n" \
"List directory contents\n" \
"\nOptions:" \
"\n -1 List in a single column" \
"\n -A Don't list . and .." \
"\n -a Don't hide entries starting with ." \
"\n -C List by columns" \
IF_FEATURE_LS_TIMESTAMPS( \
"\n -c With -l: sort by ctime") \
IF_FEATURE_LS_COLOR( \
"\n --color[={always,never,auto}] Control coloring") \
"\n -d List directory entries instead of contents" \
IF_FEATURE_LS_TIMESTAMPS( \
"\n -e List full date and time") \
IF_FEATURE_LS_FILETYPES( \
"\n -F Append indicator (one of */=@|) to entries") \
"\n -i List inode numbers" \
"\n -l Long listing format" \
"\n -n List numeric UIDs and GIDs instead of names" \
IF_FEATURE_LS_FILETYPES( \
"\n -p Append indicator (one of /=@|) to entries") \
IF_FEATURE_LS_FOLLOWLINKS( \
"\n -L List entries pointed to by symlinks") \
IF_FEATURE_LS_RECURSIVE( \
"\n -R Recurse") \
IF_FEATURE_LS_SORTFILES( \
"\n -r Sort in reverse order") \
IF_FEATURE_LS_SORTFILES( \
"\n -S Sort by file size") \
"\n -s List the size of each file, in blocks" \
IF_FEATURE_AUTOWIDTH( \
"\n -T N Assume tabstop every N columns") \
IF_FEATURE_LS_TIMESTAMPS( \
"\n -t With -l: sort by modification time") \
IF_FEATURE_LS_TIMESTAMPS( \
"\n -u With -l: sort by access time") \
IF_FEATURE_LS_SORTFILES( \
"\n -v Sort by version") \
IF_FEATURE_AUTOWIDTH( \
"\n -w N Assume the terminal is N columns wide") \
"\n -x List by lines" \
IF_FEATURE_LS_SORTFILES( \
"\n -X Sort by extension") \
IF_FEATURE_HUMAN_READABLE( \
"\n -h List sizes in human readable format (1K 243M 2G)") \
IF_SELINUX( \
"\n -k List security context") \
IF_SELINUX( \
"\n -K List security context in long format") \
IF_SELINUX( \
"\n -Z List security context and permission") \
#define lsattr_trivial_usage \
"[-Radlv] [FILE]..."
#define lsattr_full_usage "\n\n" \
"List file attributes on an ext2 fs\n" \
"\nOptions:" \
"\n -R Recurse" \
"\n -a Don't hide entries starting with ." \
"\n -d List directory entries instead of contents" \
"\n -l List long flag names" \
"\n -v List the file's version/generation number" \
#define lsmod_trivial_usage \
""
#define lsmod_full_usage "\n\n" \
"List the currently loaded kernel modules"
#define lspci_trivial_usage \
"[-mk]"
#define lspci_full_usage "\n\n" \
"List all PCI devices" \
"\n" \
"\n -m Parseable output" \
"\n -k Show driver" \
#define lsusb_trivial_usage NOUSAGE_STR
#define lsusb_full_usage ""
#if ENABLE_FEATURE_MAKEDEVS_LEAF
#define makedevs_trivial_usage \
"NAME TYPE MAJOR MINOR FIRST LAST [s]"
#define makedevs_full_usage "\n\n" \
"Create a range of block or character special files" \
"\n" \
"\nTYPE is:" \
"\n b Block device" \
"\n c Character device" \
"\n f FIFO, MAJOR and MINOR are ignored" \
"\n" \
"\nFIRST..LAST specify numbers appended to NAME." \
"\nIf 's' is the last argument, the base device is created as well." \
"\n" \
"\nExamples:" \
"\n makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63" \
"\n makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
#define makedevs_example_usage \
"# makedevs /dev/ttyS c 4 66 2 63\n" \
"[creates ttyS2-ttyS63]\n" \
"# makedevs /dev/hda b 3 0 0 8 s\n" \
"[creates hda,hda1-hda8]\n"
#endif
#if ENABLE_FEATURE_MAKEDEVS_TABLE
#define makedevs_trivial_usage \
"[-d device_table] rootdir"
#define makedevs_full_usage "\n\n" \
"Create a range of special files as specified in a device table.\n" \
"Device table entries take the form of:\n" \
"<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \
"Where name is the file name, type can be one of:\n" \
" f Regular file\n" \
" d Directory\n" \
" c Character device\n" \
" b Block device\n" \
" p Fifo (named pipe)\n" \
"uid is the user id for the target file, gid is the group id for the\n" \
"target file. The rest of the entries (major, minor, etc) apply to\n" \
"to device special files. A '-' may be used for blank entries."
#define makedevs_example_usage \
"For example:\n" \
"<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \
"/dev d 755 0 0 - - - - -\n" \
"/dev/console c 666 0 0 5 1 - - -\n" \
"/dev/null c 666 0 0 1 3 0 0 -\n" \
"/dev/zero c 666 0 0 1 5 0 0 -\n" \
"/dev/hda b 640 0 0 3 0 0 0 -\n" \
"/dev/hda b 640 0 0 3 1 1 1 15\n\n" \
"Will Produce:\n" \
"/dev\n" \
"/dev/console\n" \
"/dev/null\n" \
"/dev/zero\n" \
"/dev/hda\n" \
"/dev/hda[0-15]\n"
#endif
#define makemime_trivial_usage \
"[OPTIONS] [FILE]..."
#define makemime_full_usage "\n\n" \
"Create multipart MIME-encoded message from FILEs\n" \
/* "Transfer encoding is base64, disposition is inline (not attachment)\n" */ \
"\nOptions:" \
"\n -o FILE Output. Default: stdout" \
"\n -a HDR Add header. Examples:" \
"\n \"From: user@host.org\", \"Date: `date -R`\"" \
"\n -c CT Content type. Default: text/plain" \
"\n -C CS Charset. Default: " CONFIG_FEATURE_MIME_CHARSET \
/* "\n -e ENC Transfer encoding. Ignored. base64 is assumed" */ \
"\n" \
"\nOther options are silently ignored" \
#define man_trivial_usage \
"[OPTIONS] [MANPAGE]..."
#define man_full_usage "\n\n" \
"Format and display manual page\n" \
"\nOptions:" \
"\n -a Display all pages" \
"\n -w Show page locations" \
#define matchpathcon_trivial_usage \
"[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]"
#define matchpathcon_full_usage "\n\n" \
" -n Don't display path" \
"\n -N Don't use translations" \
"\n -f Use alternate file_context file" \
"\n -p Use prefix to speed translations" \
"\n -V Verify file context on disk matches defaults" \
#define md5sum_trivial_usage \
"[OPTIONS] [FILE]..." \
IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTIONS] -c [FILE]")
#define md5sum_full_usage "\n\n" \
"Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \
IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
"\nOptions:" \
"\n -c Check sums against given list" \
"\n -s Don't output anything, status code shows success" \
"\n -w Warn about improperly formatted checksum lines" \
)
#define md5sum_example_usage \
"$ md5sum < busybox\n" \
"6fd11e98b98a58f64ff3398d7b324003\n" \
"$ md5sum busybox\n" \
"6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
"$ md5sum -c -\n" \
"6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
"busybox: OK\n" \
"^D\n"
#define sha1sum_trivial_usage \
"[OPTIONS] [FILE]..." \
IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTIONS] -c [FILE]")
#define sha1sum_full_usage "\n\n" \
"Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums" \
IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
"\nOptions:" \
"\n -c Check sums against given list" \
"\n -s Don't output anything, status code shows success" \
"\n -w Warn about improperly formatted checksum lines" \
)
#define sha256sum_trivial_usage \
"[OPTIONS] [FILE]..." \
IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha256sum [OPTIONS] -c [FILE]")
#define sha256sum_full_usage "\n\n" \
"Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA256 checksums" \
IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
"\nOptions:" \
"\n -c Check sums against given list" \
"\n -s Don't output anything, status code shows success" \
"\n -w Warn about improperly formatted checksum lines" \
)
#define sha512sum_trivial_usage \
"[OPTIONS] [FILE]..." \
IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha512sum [OPTIONS] -c [FILE]")
#define sha512sum_full_usage "\n\n" \
"Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA512 checksums" \
IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
"\nOptions:" \
"\n -c Check sums against given list" \
"\n -s Don't output anything, status code shows success" \
"\n -w Warn about improperly formatted checksum lines" \
)
#define mdev_trivial_usage \
"[-s]"
#define mdev_full_usage "\n\n" \
" -s Scan /sys and populate /dev during system boot\n" \
"\n" \
"It can be run by kernel as a hotplug helper. To activate it:\n" \
" echo /sbin/mdev > /proc/sys/kernel/hotplug\n" \
IF_FEATURE_MDEV_CONF( \
"It uses /etc/mdev.conf with lines\n" \
"[-]DEVNAME UID:GID PERM" \
IF_FEATURE_MDEV_RENAME(" [>|=PATH]") \
IF_FEATURE_MDEV_EXEC(" [@|$|*PROG]") \
) \
#define mdev_notes_usage "" \
IF_FEATURE_MDEV_CONFIG( \
"The mdev config file contains lines that look like:\n" \
" hd[a-z][0-9]* 0:3 660\n\n" \
"That's device name (with regex match), uid:gid, and permissions.\n\n" \
IF_FEATURE_MDEV_EXEC( \
"Optionally, that can be followed (on the same line) by a special character\n" \
"and a command line to run after creating/before deleting the corresponding\n" \
"device(s). The environment variable $MDEV indicates the active device node\n" \
"(which is useful if it's a regex match). For example:\n\n" \
" hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \
"The special characters are @ (run after creating), $ (run before deleting),\n" \
"and * (run both after creating and before deleting). The commands run in\n" \
"the /dev directory, and use system() which calls /bin/sh.\n\n" \
) \
"Config file parsing stops on the first matching line. If no config\n" \
"entry is matched, devices are created with default 0:0 660. (Make\n" \
"the last line match .* to override this.)\n\n" \
)
#define mesg_trivial_usage \
"[y|n]"
#define mesg_full_usage "\n\n" \
"Control write access to your terminal\n" \
" y Allow write access to your terminal\n" \
" n Disallow write access to your terminal"
#define microcom_trivial_usage \
"[-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY"
#define microcom_full_usage "\n\n" \
"Copy bytes for stdin to TTY and from TTY to stdout\n" \
"\nOptions:" \
"\n -d Wait up to DELAY ms for TTY output before sending every" \
"\n next byte to it" \
"\n -t Exit if both stdin and TTY are silent for TIMEOUT ms" \
"\n -s Set serial line to SPEED" \
"\n -X Disable special meaning of NUL and Ctrl-X from stdin" \
#define mkdir_trivial_usage \
"[OPTIONS] DIRECTORY..."
#define mkdir_full_usage "\n\n" \
"Create DIRECTORY\n" \
"\nOptions:" \
"\n -m Mode" \
"\n -p No error if exists; make parent directories as needed" \
IF_SELINUX( \
"\n -Z Set security context" \
)
#define mkdir_example_usage \
"$ mkdir /tmp/foo\n" \
"$ mkdir /tmp/foo\n" \
"/tmp/foo: File exists\n" \
"$ mkdir /tmp/foo/bar/baz\n" \
"/tmp/foo/bar/baz: No such file or directory\n" \
"$ mkdir -p /tmp/foo/bar/baz\n"
#define mkfifo_trivial_usage \
"[OPTIONS] name"
#define mkfifo_full_usage "\n\n" \
"Create named pipe (identical to 'mknod name p')\n" \
"\nOptions:" \
"\n -m MODE Mode (default a=rw)" \
IF_SELINUX( \
"\n -Z Set security context" \
)
#define mkfs_ext2_trivial_usage \
"[-Fn] " \
/* "[-c|-l filename] " */ \
"[-b BLK_SIZE] " \
/* "[-f fragment-size] [-g blocks-per-group] " */ \
"[-i INODE_RATIO] [-I INODE_SIZE] " \
/* "[-j] [-J journal-options] [-N number-of-inodes] " */ \
"[-m RESERVED_PERCENT] " \
/* "[-o creator-os] [-O feature[,...]] [-q] " */ \
/* "[r fs-revision-level] [-E extended-options] [-v] [-F] " */ \
"[-L LABEL] " \
/* "[-M last-mounted-directory] [-S] [-T filesystem-type] " */ \
"BLOCKDEV [KBYTES]"
#define mkfs_ext2_full_usage "\n\n" \
" -b BLK_SIZE Block size, bytes" \
/* "\n -c Check device for bad blocks" */ \
/* "\n -E opts Set extended options" */ \
/* "\n -f size Fragment size in bytes" */ \
"\n -F Force" \
/* "\n -g N Number of blocks in a block group" */ \
"\n -i RATIO Max number of files is filesystem_size / RATIO" \
"\n -I BYTES Inode size (min 128)" \
/* "\n -j Create a journal (ext3)" */ \
/* "\n -J opts Set journal options (size/device)" */ \
/* "\n -l file Read bad blocks list from file" */ \
"\n -L LBL Volume label" \
"\n -m PERCENT Percent of blocks to reserve for admin" \
/* "\n -M dir Set last mounted directory" */ \
"\n -n Dry run" \
/* "\n -N N Number of inodes to create" */ \
/* "\n -o os Set the 'creator os' field" */ \
/* "\n -O features Dir_index/filetype/has_journal/journal_dev/sparse_super" */ \
/* "\n -q Quiet" */ \
/* "\n -r rev Set filesystem revision" */ \
/* "\n -S Write superblock and group descriptors only" */ \
/* "\n -T fs-type Set usage type (news/largefile/largefile4)" */ \
/* "\n -v Verbose" */ \
#define mkfs_minix_trivial_usage \
"[-c | -l FILE] [-nXX] [-iXX] BLOCKDEV [KBYTES]"
#define mkfs_minix_full_usage "\n\n" \
"Make a MINIX filesystem\n" \
"\nOptions:" \
"\n -c Check device for bad blocks" \
"\n -n [14|30] Maximum length of filenames" \
"\n -i INODES Number of inodes for the filesystem" \
"\n -l FILE Read bad blocks list from FILE" \
"\n -v Make version 2 filesystem" \
#define mkfs_reiser_trivial_usage \
"[-f] [-l LABEL] BLOCKDEV [4K-BLOCKS]"
#define mkfs_reiser_full_usage "\n\n" \
"Make a ReiserFS V3 filesystem\n" \
"\nOptions:" \
"\n -f Force" \
"\n -l LBL Volume label" \
#define mkfs_vfat_trivial_usage \
"[-v] [-n LABEL] BLOCKDEV [KBYTES]"
/* Accepted but ignored:
"[-c] [-C] [-I] [-l bad-block-file] [-b backup-boot-sector] "
"[-m boot-msg-file] [-i volume-id] "
"[-s sectors-per-cluster] [-S logical-sector-size] [-f number-of-FATs] "
"[-h hidden-sectors] [-F fat-size] [-r root-dir-entries] [-R reserved-sectors] "
*/
#define mkfs_vfat_full_usage "\n\n" \
"Make a FAT32 filesystem\n" \
"\nOptions:" \
/* "\n -c Check device for bad blocks" */ \
"\n -v Verbose" \
/* "\n -I Allow to use entire disk device (e.g. /dev/hda)" */ \
"\n -n LBL Volume label" \
#define mknod_trivial_usage \
"[OPTIONS] NAME TYPE MAJOR MINOR"
#define mknod_full_usage "\n\n" \
"Create a special file (block, character, or pipe)\n" \
"\nOptions:" \
"\n -m Create the special file using the specified mode (default a=rw)" \
"\nTYPEs include:" \
"\n b: Make a block device" \
"\n c or u: Make a character device" \
"\n p: Make a named pipe (MAJOR and MINOR are ignored)" \
IF_SELINUX( \
"\n -Z Set security context" \
)
#define mknod_example_usage \
"$ mknod /dev/fd0 b 2 0\n" \
"$ mknod -m 644 /tmp/pipe p\n"
#define mkswap_trivial_usage \
"[OPTIONS] BLOCKDEV [KBYTES]"
#define mkswap_full_usage "\n\n" \
"Prepare BLOCKDEV to be used as swap partition\n" \
"\nOptions:" \
"\n -L LBL Label" \
#define mktemp_trivial_usage \
"[-dt] [-p DIR] [TEMPLATE]"
#define mktemp_full_usage "\n\n" \
"Create a temporary file with name based on TEMPLATE and print its name.\n" \
"TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).\n" \
"\nOptions:" \
"\n -d Make a directory instead of a file" \
/* "\n -q Fail silently if an error occurs" - we ignore it */ \
"\n -t Generate a path rooted in temporary directory" \
"\n -p DIR Use DIR as a temporary directory (implies -t)" \
"\n" \
"\nFor -t or -p, directory is chosen as follows:" \
"\n$TMPDIR if set, else -p DIR, else /tmp" \
#define mktemp_example_usage \
"$ mktemp /tmp/temp.XXXXXX\n" \
"/tmp/temp.mWiLjM\n" \
"$ ls -la /tmp/temp.mWiLjM\n" \
"-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
#define more_trivial_usage \
"[FILE]..."
#define more_full_usage "\n\n" \
"View FILE (or stdin) one screenful at a time"
#define more_example_usage \
"$ dmesg | more\n"
#define mount_trivial_usage \
"[OPTIONS] [-o OPTS] DEVICE NODE"
#define mount_full_usage "\n\n" \
"Mount a filesystem. Filesystem autodetection requires /proc.\n" \
"\nOptions:" \
"\n -a Mount all filesystems in fstab" \
IF_FEATURE_MOUNT_FAKE( \
IF_FEATURE_MTAB_SUPPORT( \
"\n -f Update /etc/mtab, but don't mount" \
) \
IF_NOT_FEATURE_MTAB_SUPPORT( \
"\n -f Dry run" \
) \
) \
IF_FEATURE_MOUNT_HELPERS( \
"\n -i Don't run mount helper" \
) \
IF_FEATURE_MTAB_SUPPORT( \
"\n -n Don't update /etc/mtab" \
) \
"\n -r Read-only mount" \
"\n -w Read-write mount (default)" \
"\n -t FSTYPE Filesystem type" \
"\n -O OPT Mount only filesystems with option OPT (-a only)" \
"\n-o OPT:" \
IF_FEATURE_MOUNT_LOOP( \
"\n loop Ignored (loop devices are autodetected)" \
) \
IF_FEATURE_MOUNT_FLAGS( \
"\n [a]sync Writes are [a]synchronous" \
"\n [no]atime Disable/enable updates to inode access times" \
"\n [no]diratime Disable/enable atime updates to directories" \
"\n [no]relatime Disable/enable atime updates relative to modification time" \
"\n [no]dev (Dis)allow use of special device files" \
"\n [no]exec (Dis)allow use of executable files" \
"\n [no]suid (Dis)allow set-user-id-root programs" \
"\n [r]shared Convert [recursively] to a shared subtree" \
"\n [r]slave Convert [recursively] to a slave subtree" \
"\n [r]private Convert [recursively] to a private subtree" \
"\n [un]bindable Make mount point [un]able to be bind mounted" \
"\n bind Bind a file or directory to another location" \
"\n move Relocate an existing mount point" \
) \
"\n remount Remount a mounted filesystem, changing flags" \
"\n ro/rw Same as -r/-w" \
"\n" \
"\nThere are filesystem-specific -o flags." \
#define mount_example_usage \
"$ mount\n" \
"/dev/hda3 on / type minix (rw)\n" \
"proc on /proc type proc (rw)\n" \
"devpts on /dev/pts type devpts (rw)\n" \
"$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
"$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \
"$ mount cd_image.iso mydir\n"
#define mount_notes_usage \
"Returns 0 for success, number of failed mounts for -a, or errno for one mount."
#define mountpoint_trivial_usage \
"[-q] <[-dn] DIR | -x DEVICE>"
#define mountpoint_full_usage "\n\n" \
"Check if the directory is a mountpoint\n" \
"\nOptions:" \
"\n -q Quiet" \
"\n -d Print major/minor device number of the filesystem" \
"\n -n Print device name of the filesystem" \
"\n -x Print major/minor device number of the blockdevice" \
#define mountpoint_example_usage \
"$ mountpoint /proc\n" \
"/proc is not a mountpoint\n" \
"$ mountpoint /sys\n" \
"/sys is a mountpoint\n"
#define mt_trivial_usage \
"[-f device] opcode value"
#define mt_full_usage "\n\n" \
"Control magnetic tape drive operation\n" \
"\n" \
"Available Opcodes:\n" \
"\n" \
"bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
"fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
"ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
"setpart tell unload unlock weof wset" \
#define mv_trivial_usage \
"[OPTIONS] SOURCE DEST\n" \
"or: mv [OPTIONS] SOURCE... DIRECTORY"
#define mv_full_usage "\n\n" \
"Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY\n" \
"\nOptions:" \
"\n -f Don't prompt before overwriting" \
"\n -i Interactive, prompt before overwrite" \
#define mv_example_usage \
"$ mv /tmp/foo /bin/bar\n"
#define nameif_trivial_usage \
"[-s] [-c FILE] [{IFNAME MACADDR}]"
#define nameif_full_usage "\n\n" \
"Rename network interface while it in the down state\n" \
"\nOptions:" \
"\n -c FILE Use configuration file (default: /etc/mactab)" \
"\n -s Use syslog (LOCAL0 facility)" \
"\n IFNAME MACADDR new_interface_name interface_mac_address" \
#define nameif_example_usage \
"$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
" or\n" \
"$ nameif -c /etc/my_mactab_file\n" \
#define netstat_trivial_usage \
"[-laentuwxr"IF_FEATURE_NETSTAT_WIDE("W")IF_FEATURE_NETSTAT_PRG("p")"]"
#define netstat_full_usage "\n\n" \
"Display networking information\n" \
"\nOptions:" \
"\n -l Display listening server sockets" \
"\n -a Display all sockets (default: connected)" \
"\n -e Display other/more information" \
"\n -n Don't resolve names" \
"\n -t Tcp sockets" \
"\n -u Udp sockets" \
"\n -w Raw sockets" \
"\n -x Unix sockets" \
"\n -r Display routing table" \
IF_FEATURE_NETSTAT_WIDE( \
"\n -W Display with no column truncation" \
) \
IF_FEATURE_NETSTAT_PRG( \
"\n -p Display PID/Program name for sockets" \
)
#define nmeter_trivial_usage \
"format_string"
#define nmeter_full_usage "\n\n" \
"Monitor system in real time\n\n" \
"Format specifiers:\n" \
" %Nc or %[cN] Monitor CPU. N - bar size, default 10\n" \
" (displays: S:system U:user N:niced D:iowait I:irq i:softirq)\n" \
" %[niface] Monitor network interface 'iface'\n" \
" %m Monitor allocated memory\n" \
" %[mf] Monitor free memory\n" \
" %[mt] Monitor total memory\n" \
" %s Monitor allocated swap\n" \
" %f Monitor number of used file descriptors\n" \
" %Ni Monitor total/specific IRQ rate\n" \
" %x Monitor context switch rate\n" \
" %p Monitor forks\n" \
" %[pn] Monitor # of processes\n" \
" %b Monitor block io\n" \
" %Nt Show time (with N decimal points)\n" \
" %Nd Milliseconds between updates (default:1000)\n" \
" %r Print <cr> instead of <lf> at EOL" \
#define nmeter_example_usage \
"nmeter '%250d%t %20c int %i bio %b mem %m forks%p'"
#define nohup_trivial_usage \
"PROG ARGS"
#define nohup_full_usage "\n\n" \
"Run PROG immune to hangups, with output to a non-tty"
#define nohup_example_usage \
"$ nohup make &"
#define nslookup_trivial_usage \
"[HOST] [SERVER]"
#define nslookup_full_usage "\n\n" \
"Query the nameserver for the IP address of the given HOST\n" \
"optionally using a specified DNS server"
#define nslookup_example_usage \
"$ nslookup localhost\n" \
"Server: default\n" \
"Address: default\n" \
"\n" \
"Name: debian\n" \
"Address: 127.0.0.1\n"
#define ntpd_trivial_usage \
"[-dnqwl] [-S PROG] [-p PEER]..."
#define ntpd_full_usage "\n\n" \
"NTP client/server\n" \
"\nOptions:" \
"\n -d Verbose" \
"\n -n Do not daemonize" \
"\n -q Quit after clock is set" \
"\n -N Run at high priority" \
"\n -w Do not set time (only query peers), implies -n" \
"\n -l Run as server on port 123" \
"\n -S PROG Run PROG after stepping time, stratum change, and every 11 mins" \
"\n -p PEER Obtain time from PEER (may be repeated)" \
#define od_trivial_usage \
"[-aBbcDdeFfHhIiLlOovXx] " IF_DESKTOP("[-t TYPE] ") "[FILE]"
#define od_full_usage "\n\n" \
"Write an unambiguous representation, octal bytes by default, of FILE\n" \
"(or stdin) to stdout"
#define openvt_trivial_usage \
"[-c N] [-sw] [PROG ARGS]"
#define openvt_full_usage "\n\n" \
"Start PROG on a new virtual terminal\n" \
"\nOptions:" \
"\n -c N Use specified VT" \
"\n -s Switch to the VT" \
/* "\n -l Run PROG as login shell (by prepending '-')" */ \
"\n -w Wait for PROG to exit" \
#define openvt_example_usage \
"openvt 2 /bin/ash\n"
/*
#define parse_trivial_usage \
"[-n MAXTOKENS] [-m MINTOKENS] [-d DELIMS] [-f FLAGS] FILE..."
#define parse_full_usage ""
*/
#define passwd_trivial_usage \
"[OPTIONS] [USER]"
#define passwd_full_usage "\n\n" \
"Change USER's password. If no USER is specified,\n" \
"changes the password for the current user.\n" \
"\nOptions:" \
"\n -a Algorithm to use for password (des, md5)" /* ", sha1)" */ \
"\n -d Delete password for the account" \
"\n -l Lock (disable) account" \
"\n -u Unlock (re-enable) account" \
#define chpasswd_trivial_usage \
IF_LONG_OPTS("[--md5|--encrypted]") IF_NOT_LONG_OPTS("[-m|-e]")
#define chpasswd_full_usage "\n\n" \
"Read user:password from stdin and update /etc/passwd\n" \
"\nOptions:" \
IF_LONG_OPTS( \
"\n -e,--encrypted Supplied passwords are in encrypted form" \
"\n -m,--md5 Use MD5 encryption instead of DES" \
) \
IF_NOT_LONG_OPTS( \
"\n -e Supplied passwords are in encrypted form" \
"\n -m Use MD5 encryption instead of DES" \
)
#define patch_trivial_usage \
"[OPTIONS] [ORIGFILE [PATCHFILE]]"
#define patch_full_usage "\n\n" \
IF_LONG_OPTS( \
" -p,--strip N Strip N leading components from file names" \
"\n -i,--input DIFF Read DIFF instead of stdin" \
"\n -R,--reverse Reverse patch" \
"\n -N,--forward Ignore already applied patches" \
"\n --dry-run Don't actually change files" \
) \
IF_NOT_LONG_OPTS( \
" -p N Strip N leading components from file names" \
"\n -i DIFF Read DIFF instead of stdin" \
"\n -R Reverse patch" \
"\n -N Ignore already applied patches" \
)
#define patch_example_usage \
"$ patch -p1 < example.diff\n" \
"$ patch -p0 -i example.diff"
#define pgrep_trivial_usage \
"[-flnovx] [-s SID|-P PPID|PATTERN]"
#define pgrep_full_usage "\n\n" \
"Display process(es) selected by regex PATTERN\n" \
"\nOptions:" \
"\n -l Show command name too" \
"\n -f Match against entire command line" \
"\n -n Show the newest process only" \
"\n -o Show the oldest process only" \
"\n -v Negate the match" \
"\n -x Match whole name (not substring)" \
"\n -s Match session ID (0 for current)" \
"\n -P Match parent process ID" \
#if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
#define pidof_trivial_usage \
"[OPTIONS] [NAME]..."
#define USAGE_PIDOF "\n\nOptions:"
#else
#define pidof_trivial_usage \
"[NAME]..."
#define USAGE_PIDOF /* none */
#endif
#define pidof_full_usage "\n\n" \
"List PIDs of all processes with names that match NAMEs" \
USAGE_PIDOF \
IF_FEATURE_PIDOF_SINGLE( \
"\n -s Show only one PID") \
IF_FEATURE_PIDOF_OMIT( \
"\n -o PID Omit given pid" \
"\n Use %PPID to omit pid of pidof's parent") \
#define pidof_example_usage \
"$ pidof init\n" \
"1\n" \
IF_FEATURE_PIDOF_OMIT( \
"$ pidof /bin/sh\n20351 5973 5950\n") \
IF_FEATURE_PIDOF_OMIT( \
"$ pidof /bin/sh -o %PPID\n20351 5950")
#if !ENABLE_FEATURE_FANCY_PING
#define ping_trivial_usage \
"host"
#define ping_full_usage "\n\n" \
"Send ICMP ECHO_REQUEST packets to network hosts"
#define ping6_trivial_usage \
"host"
#define ping6_full_usage "\n\n" \
"Send ICMP ECHO_REQUEST packets to network hosts"
#else
#define ping_trivial_usage \
"[OPTIONS] HOST"
#define ping_full_usage "\n\n" \
"Send ICMP ECHO_REQUEST packets to network hosts\n" \
"\nOptions:" \
"\n -4, -6 Force IP or IPv6 name resolution" \
"\n -c CNT Send only CNT pings" \
"\n -s SIZE Send SIZE data bytes in packets (default:56)" \
"\n -I IFACE/IP Use interface or IP address as source" \
"\n -W SEC Seconds to wait for the first response (default:10)" \
"\n (after all -c CNT packets are sent)" \
"\n -w SEC Seconds until ping exits (default:infinite)" \
"\n (can exit earlier with -c CNT)" \
"\n -q Quiet, only displays output at start" \
"\n and when finished" \
#define ping6_trivial_usage \
"[OPTIONS] HOST"
#define ping6_full_usage "\n\n" \
"Send ICMP ECHO_REQUEST packets to network hosts\n" \
"\nOptions:" \
"\n -c CNT Send only CNT pings" \
"\n -s SIZE Send SIZE data bytes in packets (default:56)" \
"\n -I IFACE/IP Use interface or IP address as source" \
"\n -q Quiet, only displays output at start" \
"\n and when finished" \
#endif
#define ping_example_usage \
"$ ping localhost\n" \
"PING slag (127.0.0.1): 56 data bytes\n" \
"64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \
"\n" \
"--- debian ping statistics ---\n" \
"1 packets transmitted, 1 packets received, 0% packet loss\n" \
"round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
#define ping6_example_usage \
"$ ping6 ip6-localhost\n" \
"PING ip6-localhost (::1): 56 data bytes\n" \
"64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \
"\n" \
"--- ip6-localhost ping statistics ---\n" \
"1 packets transmitted, 1 packets received, 0% packet loss\n" \
"round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
#define pipe_progress_trivial_usage NOUSAGE_STR
#define pipe_progress_full_usage ""
#define pivot_root_trivial_usage \
"NEW_ROOT PUT_OLD"
#define pivot_root_full_usage "\n\n" \
"Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
"the new root file system"
#define pkill_trivial_usage \
"[-l|-SIGNAL] [-fnovx] [-s SID|-P PPID|PATTERN]"
#define pkill_full_usage "\n\n" \
"Send a signal to process(es) selected by regex PATTERN\n" \
"\nOptions:" \
"\n -l List all signals" \
"\n -f Match against entire command line" \
"\n -n Signal the newest process only" \
"\n -o Signal the oldest process only" \
"\n -v Negate the match" \
"\n -x Match whole name (not substring)" \
"\n -s Match session ID (0 for current)" \
"\n -P Match parent process ID" \
#define popmaildir_trivial_usage \
"[OPTIONS] MAILDIR [CONN_HELPER ARGS]"
#define popmaildir_full_usage "\n\n" \
"Fetch content of remote mailbox to local maildir\n" \
"\nOptions:" \
/* "\n -b Binary mode. Ignored" */ \
/* "\n -d Debug. Ignored" */ \
/* "\n -m Show used memory. Ignored" */ \
/* "\n -V Show version. Ignored" */ \
/* "\n -c Use tcpclient. Ignored" */ \
/* "\n -a Use APOP protocol. Implied. If server supports APOP -> use it" */ \
"\n -s Skip authorization" \
"\n -T Get messages with TOP instead of RETR" \
"\n -k Keep retrieved messages on the server" \
"\n -t SEC Network timeout" \
IF_FEATURE_POPMAILDIR_DELIVERY( \
"\n -F \"PROG ARGS\" Filter program (may be repeated)" \
"\n -M \"PROG ARGS\" Delivery program" \
) \
"\n" \
"\nFetch from plain POP3 server:" \
"\npopmaildir -k DIR nc pop3.server.com 110 <user_and_pass.txt" \
"\nFetch from SSLed POP3 server and delete fetched emails:" \
"\npopmaildir DIR -- openssl s_client -quiet -connect pop3.server.com:995 <user_and_pass.txt"
/* "\n -R BYTES Remove old messages on the server >= BYTES. Ignored" */
/* "\n -Z N1-N2 Remove messages from N1 to N2 (dangerous). Ignored" */
/* "\n -L BYTES Don't retrieve new messages >= BYTES. Ignored" */
/* "\n -H LINES Type first LINES of a message. Ignored" */
#define popmaildir_example_usage \
"$ popmaildir -k ~/Maildir -- nc pop.drvv.ru 110 [<password_file]\n" \
"$ popmaildir ~/Maildir -- openssl s_client -quiet -connect pop.gmail.com:995 [<password_file]\n"
#define poweroff_trivial_usage \
"[-d DELAY] [-n] [-f]"
#define poweroff_full_usage "\n\n" \
"Halt and shut off power\n" \
"\nOptions:" \
"\n -d Delay interval for halting" \
"\n -n Do not sync" \
"\n -f Force power off (don't go through init)" \
#define printenv_trivial_usage \
"[VARIABLE]..."
#define printenv_full_usage "\n\n" \
"Print environment VARIABLEs.\n" \
"If no VARIABLE specified, print all."
#define printf_trivial_usage \
"FORMAT [ARGUMENT]..."
#define printf_full_usage "\n\n" \
"Format and print ARGUMENT(s) according to FORMAT,\n" \
"where FORMAT controls the output exactly as in C printf"
#define printf_example_usage \
"$ printf \"Val=%d\\n\" 5\n" \
"Val=5\n"
#if ENABLE_DESKTOP
#define ps_trivial_usage \
"[-o COL1,COL2=HEADER]" IF_FEATURE_SHOW_THREADS(" [-T]")
#define ps_full_usage "\n\n" \
"Show list of processes\n" \
"\nOptions:" \
"\n -o COL1,COL2=HEADER Select columns for display" \
IF_FEATURE_SHOW_THREADS( \
"\n -T Show threads" \
)
#else /* !ENABLE_DESKTOP */
#if !ENABLE_SELINUX && !ENABLE_FEATURE_PS_WIDE
#define USAGE_PS "\nThis version of ps accepts no options"
#else
#define USAGE_PS "\nOptions:"
#endif
#define ps_trivial_usage \
""
#define ps_full_usage "\n\n" \
"Show list of processes\n" \
USAGE_PS \
IF_SELINUX( \
"\n -Z Show selinux context" \
) \
IF_FEATURE_PS_WIDE( \
"\n w Wide output" \
)
#endif /* ENABLE_DESKTOP */
#define ps_example_usage \
"$ ps\n" \
" PID Uid Gid State Command\n" \
" 1 root root S init\n" \
" 2 root root S [kflushd]\n" \
" 3 root root S [kupdate]\n" \
" 4 root root S [kpiod]\n" \
" 5 root root S [kswapd]\n" \
" 742 andersen andersen S [bash]\n" \
" 743 andersen andersen S -bash\n" \
" 745 root root S [getty]\n" \
" 2990 andersen andersen R ps\n" \
#define pscan_trivial_usage \
"[-cb] [-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST"
#define pscan_full_usage "\n\n" \
"Scan a host, print all open ports\n" \
"\nOptions:" \
"\n -c Show closed ports too" \
"\n -b Show blocked ports too" \
"\n -p Scan from this port (default 1)" \
"\n -P Scan up to this port (default 1024)" \
"\n -t Timeout (default 5000 ms)" \
"\n -T Minimum rtt (default 5 ms, increase for congested hosts)" \
#define pwd_trivial_usage \
""
#define pwd_full_usage "\n\n" \
"Print the full filename of the current working directory"
#define pwd_example_usage \
"$ pwd\n" \
"/root\n"
#define raidautorun_trivial_usage \
"DEVICE"
#define raidautorun_full_usage "\n\n" \
"Tell the kernel to automatically search and start RAID arrays"
#define raidautorun_example_usage \
"$ raidautorun /dev/md0"
#define rdate_trivial_usage \
"[-sp] HOST"
#define rdate_full_usage "\n\n" \
"Get and possibly set the system date and time from a remote HOST\n" \
"\nOptions:" \
"\n -s Set the system date and time (default)" \
"\n -p Print the date and time" \
#define rdev_trivial_usage \
""
#define rdev_full_usage "\n\n" \
"Print the device node associated with the filesystem mounted at '/'"
#define rdev_example_usage \
"$ rdev\n" \
"/dev/mtdblock9 /\n"
#define readahead_trivial_usage \
"[FILE]..."
#define readahead_full_usage "\n\n" \
"Preload FILEs to RAM"
#define readlink_trivial_usage \
IF_FEATURE_READLINK_FOLLOW("[-fnv] ") "FILE"
#define readlink_full_usage "\n\n" \
"Display the value of a symlink" \
IF_FEATURE_READLINK_FOLLOW( "\n" \
"\nOptions:" \
"\n -f Canonicalize by following all symlinks" \
"\n -n Don't add newline" \
"\n -v Verbose" \
) \
#define readprofile_trivial_usage \
"[OPTIONS]"
#define readprofile_full_usage "\n\n" \
"Options:" \
"\n -m mapfile (Default: /boot/System.map)" \
"\n -p profile (Default: /proc/profile)" \
"\n -M NUM Set the profiling multiplier to NUM" \
"\n -i Print only info about the sampling step" \
"\n -v Verbose" \
"\n -a Print all symbols, even if count is 0" \
"\n -b Print individual histogram-bin counts" \
"\n -s Print individual counters within functions" \
"\n -r Reset all the counters (root only)" \
"\n -n Disable byte order auto-detection" \
#define realpath_trivial_usage \
"FILE..."
#define realpath_full_usage "\n\n" \
"Return the absolute pathnames of given FILE"
#define reboot_trivial_usage \
"[-d DELAY] [-n] [-f]"
#define reboot_full_usage "\n\n" \
"Reboot the system\n" \
"\nOptions:" \
"\n -d Delay interval for rebooting" \
"\n -n No call to sync()" \
"\n -f Force reboot (don't go through init)" \
#define reformime_trivial_usage \
"[OPTIONS] [FILE]..."
#define reformime_full_usage "\n\n" \
"Parse MIME-encoded message\n" \
"\nOptions:" \
"\n -x PREFIX Extract content of MIME sections to files" \
"\n -X PROG ARGS Filter content of MIME sections through PROG" \
"\n Must be the last option" \
"\n" \
"\nOther options are silently ignored" \
#define scriptreplay_trivial_usage \
"timingfile [typescript [divisor]]"
#define scriptreplay_full_usage "\n\n" \
"Play back typescripts, using timing information"
#define reset_trivial_usage \
""
#define reset_full_usage "\n\n" \
"Reset the screen"
#define resize_trivial_usage \
""
#define resize_full_usage "\n\n" \
"Resize the screen"
#define restorecon_trivial_usage \
"[-iFnRv] [-e EXCLUDEDIR]... [-o FILE] [-f FILE]"
#define restorecon_full_usage "\n\n" \
"Reset security contexts of files in pathname\n" \
"\n -i Ignore files that don't exist" \
"\n -f FILE File with list of files to process" \
"\n -e DIR Directory to exclude" \
"\n -R,-r Recurse" \
"\n -n Don't change any file labels" \
"\n -o FILE Save list of files with incorrect context" \
"\n -v Verbose" \
"\n -vv Show changed labels" \
"\n -F Force reset of context to match file_context" \
"\n for customizable files, or the user section," \
"\n if it has changed" \
#define rfkill_trivial_usage \
"COMMAND [INDEX|TYPE]"
#define rfkill_full_usage "\n\n" \
"Enable/disable wireless devices\n" \
"\nCommands:" \
"\n list [INDEX|TYPE] List current state" \
"\n block INDEX|TYPE Disable device" \
"\n unblock INDEX|TYPE Enable device" \
"\n" \
"\n TYPE: all, wlan(wifi), bluetooth, uwb(ultrawideband)," \
"\n wimax, wwan, gps, fm" \
#define rm_trivial_usage \
"[OPTIONS] FILE..."
#define rm_full_usage "\n\n" \
"Remove (unlink) FILEs\n" \
"\nOptions:" \
"\n -i Always prompt before removing" \
"\n -f Never prompt" \
"\n -R,-r Recurse" \
#define rm_example_usage \
"$ rm -rf /tmp/foo\n"
#define rmdir_trivial_usage \
"[OPTIONS] DIRECTORY..."
#define rmdir_full_usage "\n\n" \
"Remove DIRECTORY if it is empty\n" \
"\nOptions:" \
IF_FEATURE_RMDIR_LONG_OPTIONS( \
"\n -p|--parents Include parents" \
"\n --ignore-fail-on-non-empty" \
) \
IF_NOT_FEATURE_RMDIR_LONG_OPTIONS( \
"\n -p Include parents" \
)
#define rmdir_example_usage \
"# rmdir /tmp/foo\n"
#define rmmod_trivial_usage \
"[OPTIONS] [MODULE]..."
#define rmmod_full_usage "\n\n" \
"Unload the specified kernel modules from the kernel\n" \
"\nOptions:" \
"\n -w Wait until the module is no longer used" \
"\n -f Force unloading" \
"\n -a Remove all unused modules (recursively)" \
#define rmmod_example_usage \
"$ rmmod tulip\n"
#define route_trivial_usage \
"[{add|del|delete}]"
#define route_full_usage "\n\n" \
"Edit kernel routing tables\n" \
"\nOptions:" \
"\n -n Don't resolve names" \
"\n -e Display other/more information" \
"\n -A inet" IF_FEATURE_IPV6("{6}") " Select address family" \
#define rpm_trivial_usage \
"-i PACKAGE.rpm; rpm -qp[ildc] PACKAGE.rpm"
#define rpm_full_usage "\n\n" \
"Manipulate RPM packages\n" \
"\nCommands:" \
"\n -i Install package" \
"\n -qp Query package" \
"\nOptions:" \
"\n -i Show information" \
"\n -l List contents" \
"\n -d List documents" \
"\n -c List config files" \
#define rpm2cpio_trivial_usage \
"package.rpm"
#define rpm2cpio_full_usage "\n\n" \
"Output a cpio archive of the rpm file"
#define rtcwake_trivial_usage \
"[-a | -l | -u] [-d DEV] [-m MODE] [-s SEC | -t TIME]"
#define rtcwake_full_usage "\n\n" \
"Enter a system sleep state until specified wakeup time\n" \
IF_LONG_OPTS( \
"\n -a,--auto Read clock mode from adjtime" \
"\n -l,--local Clock is set to local time" \
"\n -u,--utc Clock is set to UTC time" \
"\n -d,--device=DEV Specify the RTC device" \
"\n -m,--mode=MODE Set the sleep state (default: standby)" \
"\n -s,--seconds=SEC Set the timeout in SEC seconds from now" \
"\n -t,--time=TIME Set the timeout to TIME seconds from epoch" \
) \
IF_NOT_LONG_OPTS( \
"\n -a Read clock mode from adjtime" \
"\n -l Clock is set to local time" \
"\n -u Clock is set to UTC time" \
"\n -d DEV Specify the RTC device" \
"\n -m MODE Set the sleep state (default: standby)" \
"\n -s SEC Set the timeout in SEC seconds from now" \
"\n -t TIME Set the timeout to TIME seconds from epoch" \
)
#define runcon_trivial_usage \
"[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] PROG ARGS\n" \
"runcon CONTEXT PROG ARGS"
#define runcon_full_usage "\n\n" \
"Run PROG in a different security context\n" \
"\n CONTEXT Complete security context\n" \
IF_FEATURE_RUNCON_LONG_OPTIONS( \
"\n -c,--compute Compute process transition context before modifying" \
"\n -t,--type=TYPE Type (for same role as parent)" \
"\n -u,--user=USER User identity" \
"\n -r,--role=ROLE Role" \
"\n -l,--range=RNG Levelrange" \
) \
IF_NOT_FEATURE_RUNCON_LONG_OPTIONS( \
"\n -c Compute process transition context before modifying" \
"\n -t TYPE Type (for same role as parent)" \
"\n -u USER User identity" \
"\n -r ROLE Role" \
"\n -l RNG Levelrange" \
)
#define run_parts_trivial_usage \
"[-t] "IF_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY"
#define run_parts_full_usage "\n\n" \
"Run a bunch of scripts in DIRECTORY\n" \
"\nOptions:" \
"\n -t Print what would be run, but don't actually run anything" \
"\n -a ARG Pass ARG as argument for every program" \
"\n -u MASK Set the umask to MASK before running every program" \
IF_FEATURE_RUN_PARTS_FANCY( \
"\n -l Print names of all matching files even if they are not executable" \
)
#define run_parts_example_usage \
"$ run-parts -a start /etc/init.d\n" \
"$ run-parts -a stop=now /etc/init.d\n\n" \
"Let's assume you have a script foo/dosomething:\n" \
"#!/bin/sh\n" \
"for i in $*; do eval $i; done; unset i\n" \
"case \"$1\" in\n" \
"start*) echo starting something;;\n" \
"stop*) set -x; shutdown -h $stop;;\n" \
"esac\n\n" \
"Running this yields:\n" \
"$run-parts -a stop=+4m foo/\n" \
"+ shutdown -h +4m"
#define runlevel_trivial_usage \
"[FILE]"
#define runlevel_full_usage "\n\n" \
"Find the current and previous system runlevel\n" \
"\n" \
"If no utmp FILE exists or if no runlevel record can be found,\n" \
"print \"unknown\""
#define runlevel_example_usage \
"$ runlevel /var/run/utmp\n" \
"N 2"
#define runsv_trivial_usage \
"DIR"
#define runsv_full_usage "\n\n" \
"Start and monitor a service and optionally an appendant log service"
#define runsvdir_trivial_usage \
"[-P] [-s SCRIPT] DIR"
#define runsvdir_full_usage "\n\n" \
"Start a runsv process for each subdirectory. If it exits, restart it.\n" \
"\n -P Put each runsv in a new session" \
"\n -s SCRIPT Run SCRIPT <signo> after signal is processed" \
#define rx_trivial_usage \
"FILE"
#define rx_full_usage "\n\n" \
"Receive a file using the xmodem protocol"
#define rx_example_usage \
"$ rx /tmp/foo\n"
#define script_trivial_usage \
"[-afq" IF_SCRIPTREPLAY("t") "] [-c PROG] [OUTFILE]"
#define script_full_usage "\n\n" \
"Options:" \
"\n -a Append output" \
"\n -c PROG Run PROG, not shell" \
"\n -f Flush output after each write" \
"\n -q Quiet" \
IF_SCRIPTREPLAY( \
"\n -t Send timing to stderr" \
)
#define sed_trivial_usage \
"[-efinr] SED_CMD [FILE]..."
#define sed_full_usage "\n\n" \
"Options:" \
"\n -e CMD Add CMD to sed commands to be executed" \
"\n -f FILE Add FILE contents to sed commands to be executed" \
"\n -i Edit files in-place (else sends result to stdout)" \
"\n -n Suppress automatic printing of pattern space" \
"\n -r Use extended regex syntax" \
"\n" \
"\nIf no -e or -f, the first non-option argument is the sed command string." \
"\nRemaining arguments are input files (stdin if none)."
#define sed_example_usage \
"$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
"bar\n"
#define selinuxenabled_trivial_usage NOUSAGE_STR
#define selinuxenabled_full_usage ""
#define sendmail_trivial_usage \
"[OPTIONS] [RECIPIENT_EMAIL]..."
#define sendmail_full_usage "\n\n" \
"Read email from stdin and send it\n" \
"\nStandard options:" \
"\n -t Read additional recipients from message body" \
"\n -f sender Sender (required)" \
"\n -o options Various options. -oi implied, others are ignored" \
"\n -i -oi synonym. implied and ignored" \
"\n" \
"\nBusybox specific options:" \
"\n -w seconds Network timeout" \
"\n -H 'PROG ARGS' Run connection helper" \
"\n Examples:" \
"\n -H 'exec openssl s_client -quiet -tls1 -starttls smtp" \
"\n -connect smtp.gmail.com:25' <email.txt" \
"\n [4<username_and_passwd.txt | -au<username> -ap<password>]" \
"\n -H 'exec openssl s_client -quiet -tls1" \
"\n -connect smtp.gmail.com:465' <email.txt" \
"\n [4<username_and_passwd.txt | -au<username> -ap<password>]" \
"\n -S server[:port] Server" \
"\n -au<username> Username for AUTH LOGIN" \
"\n -ap<password> Password for AUTH LOGIN" \
"\n -am<method> Authentication method. Ignored. LOGIN is implied" \
"\n" \
"\nOther options are silently ignored; -oi -t is implied" \
IF_MAKEMIME( \
"\nUse makemime applet to create message with attachments" \
)
#define seq_trivial_usage \
"[-w] [-s SEP] [FIRST [INC]] LAST"
#define seq_full_usage "\n\n" \
"Print numbers from FIRST to LAST, in steps of INC.\n" \
"FIRST, INC default to 1.\n" \
"\nOptions:" \
"\n -w Pad to last with leading zeros" \
"\n -s SEP String separator" \
#define sestatus_trivial_usage \
"[-vb]"
#define sestatus_full_usage "\n\n" \
" -v Verbose" \
"\n -b Display current state of booleans" \
#define setconsole_trivial_usage \
"[-r" IF_FEATURE_SETCONSOLE_LONG_OPTIONS("|--reset") "] [DEVICE]"
#define setconsole_full_usage "\n\n" \
"Redirect system console output to DEVICE (default: /dev/tty)\n" \
"\nOptions:" \
"\n -r Reset output to /dev/console" \
#define setenforce_trivial_usage \
"[Enforcing | Permissive | 1 | 0]"
#define setenforce_full_usage ""
#define setfiles_trivial_usage \
"[-dnpqsvW] [-e DIR]... [-o FILE] [-r alt_root_path]" \
IF_FEATURE_SETFILES_CHECK_OPTION( \
" [-c policyfile] spec_file" \
) \
" pathname"
#define setfiles_full_usage "\n\n" \
"Reset file contexts under pathname according to spec_file\n" \
IF_FEATURE_SETFILES_CHECK_OPTION( \
"\n -c FILE Check the validity of the contexts against the specified binary policy" \
) \
"\n -d Show which specification matched each file" \
"\n -l Log changes in file labels to syslog" \
"\n -n Don't change any file labels" \
"\n -q Suppress warnings" \
"\n -r DIR Use an alternate root path" \
"\n -e DIR Exclude DIR" \
"\n -F Force reset of context to match file_context for customizable files" \
"\n -o FILE Save list of files with incorrect context" \
"\n -s Take a list of files from stdin (instead of command line)" \
"\n -v Show changes in file labels, if type or role are changing" \
"\n -vv Show changes in file labels, if type, role, or user are changing" \
"\n -W Display warnings about entries that had no matching files" \
#define setfont_trivial_usage \
"FONT [-m MAPFILE] [-C TTY]"
#define setfont_full_usage "\n\n" \
"Load a console font\n" \
"\nOptions:" \
"\n -m MAPFILE Load console screen map" \
"\n -C TTY Affect TTY instead of /dev/tty" \
#define setfont_example_usage \
"$ setfont -m koi8-r /etc/i18n/fontname\n"
#define setkeycodes_trivial_usage \
"SCANCODE KEYCODE..."
#define setkeycodes_full_usage "\n\n" \
"Set entries into the kernel's scancode-to-keycode map,\n" \
"allowing unusual keyboards to generate usable keycodes.\n\n" \
"SCANCODE may be either xx or e0xx (hexadecimal),\n" \
"and KEYCODE is given in decimal." \
#define setkeycodes_example_usage \
"$ setkeycodes e030 127\n"
#define setlogcons_trivial_usage \
"N"
#define setlogcons_full_usage "\n\n" \
"Redirect the kernel output to console N (0 for current)"
#define setsebool_trivial_usage \
"boolean value"
#define setsebool_full_usage "\n\n" \
"Change boolean setting"
#define setsid_trivial_usage \
"PROG ARGS"
#define setsid_full_usage "\n\n" \
"Run PROG in a new session. PROG will have no controlling terminal\n" \
"and will not be affected by keyboard signals (Ctrl-C etc).\n" \
"See setsid(2) for details." \
#define last_trivial_usage \
""IF_FEATURE_LAST_FANCY("[-HW] [-f FILE]")
#define last_full_usage "\n\n" \
"Show listing of the last users that logged into the system" \
IF_FEATURE_LAST_FANCY( "\n" \
"\nOptions:" \
/* "\n -H Show header line" */ \
"\n -W Display with no host column truncation" \
"\n -f FILE Read from FILE instead of /var/log/wtmp" \
)
#define showkey_trivial_usage \
"[-a | -k | -s]"
#define showkey_full_usage "\n\n" \
"Show keys pressed\n" \
"\nOptions:" \
"\n -a Display decimal/octal/hex values of the keys" \
"\n -k Display interpreted keycodes (default)" \
"\n -s Display raw scan-codes" \
#define slattach_trivial_usage \
"[-cehmLF] [-s SPEED] [-p PROTOCOL] DEVICE"
#define slattach_full_usage "\n\n" \
"Attach network interface(s) to serial line(s)\n" \
"\nOptions:" \
"\n -p PROT Set protocol (slip, cslip, slip6, clisp6 or adaptive)" \
"\n -s SPD Set line speed" \
"\n -e Exit after initializing device" \
"\n -h Exit when the carrier is lost" \
"\n -c PROG Run PROG when the line is hung up" \
"\n -m Do NOT initialize the line in raw 8 bits mode" \
"\n -L Enable 3-wire operation" \
"\n -F Disable RTS/CTS flow control" \
#define sleep_trivial_usage \
IF_FEATURE_FANCY_SLEEP("[") "N" IF_FEATURE_FANCY_SLEEP("]...")
#define sleep_full_usage "\n\n" \
IF_NOT_FEATURE_FANCY_SLEEP("Pause for N seconds") \
IF_FEATURE_FANCY_SLEEP( \
"Pause for a time equal to the total of the args given, where each arg can\n" \
"have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays")
#define sleep_example_usage \
"$ sleep 2\n" \
"[2 second delay results]\n" \
IF_FEATURE_FANCY_SLEEP( \
"$ sleep 1d 3h 22m 8s\n" \
"[98528 second delay results]\n")
#define sort_trivial_usage \
"[-nru" \
IF_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o FILE] [-k start[.offset][opts][,end[.offset][opts]] [-t CHAR") \
"] [FILE]..."
#define sort_full_usage "\n\n" \
"Sort lines of text\n" \
"\nOptions:" \
IF_FEATURE_SORT_BIG( \
"\n -b Ignore leading blanks" \
"\n -c Check whether input is sorted" \
"\n -d Dictionary order (blank or alphanumeric only)" \
"\n -f Ignore case" \
"\n -g General numerical sort" \
"\n -i Ignore unprintable characters" \
"\n -k Sort key" \
"\n -M Sort month" \
) \
"\n -n Sort numbers" \
IF_FEATURE_SORT_BIG( \
"\n -o Output to file" \
"\n -k Sort by key" \
"\n -t CHAR Key separator" \
) \
"\n -r Reverse sort order" \
IF_FEATURE_SORT_BIG( \
"\n -s Stable (don't sort ties alphabetically)" \
) \
"\n -u Suppress duplicate lines" \
IF_FEATURE_SORT_BIG( \
"\n -z Lines are terminated by NUL, not newline" \
"\n -mST Ignored for GNU compatibility") \
#define sort_example_usage \
"$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
"a\n" \
"b\n" \
"c\n" \
"d\n" \
"e\n" \
"f\n" \
IF_FEATURE_SORT_BIG( \
"$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \
"d 2\n" \
"b 2\n" \
"c 3\n" \
) \
""
#define split_trivial_usage \
"[OPTIONS] [INPUT [PREFIX]]"
#define split_full_usage "\n\n" \
"Options:" \
"\n -b n[k|m] Split by bytes" \
"\n -l n Split by lines" \
"\n -a n Use n letters as suffix" \
#define split_example_usage \
"$ split TODO foo\n" \
"$ cat TODO | split -a 2 -l 2 TODO_\n"
#define start_stop_daemon_trivial_usage \
"[OPTIONS] [-S|-K] ... [-- ARGS...]"
#define start_stop_daemon_full_usage "\n\n" \
"Search for matching processes, and then\n" \
"-K: stop all matching processes.\n" \
"-S: start a process unless a matching process is found.\n" \
IF_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \
"\nProcess matching:" \
"\n -u,--user USERNAME|UID Match only this user's processes" \
"\n -n,--name NAME Match processes with NAME" \
"\n in comm field in /proc/PID/stat" \
"\n -x,--exec EXECUTABLE Match processes with this command" \
"\n in /proc/PID/cmdline" \
"\n -p,--pidfile FILE Match a process with PID from the file" \
"\n All specified conditions must match" \
"\n-S only:" \
"\n -x,--exec EXECUTABLE Program to run" \
"\n -a,--startas NAME Zeroth argument" \
"\n -b,--background Background" \
IF_FEATURE_START_STOP_DAEMON_FANCY( \
"\n -N,--nicelevel N Change nice level" \
) \
"\n -c,--chuid USER[:[GRP]] Change to user/group" \
"\n -m,--make-pidfile Write PID to the pidfile specified by -p" \
"\n-K only:" \
"\n -s,--signal SIG Signal to send" \
"\n -t,--test Match only, exit with 0 if a process is found" \
"\nOther:" \
IF_FEATURE_START_STOP_DAEMON_FANCY( \
"\n -o,--oknodo Exit with status 0 if nothing is done" \
"\n -v,--verbose Verbose" \
) \
"\n -q,--quiet Quiet" \
) \
IF_NOT_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \
"\nProcess matching:" \
"\n -u USERNAME|UID Match only this user's processes" \
"\n -n NAME Match processes with NAME" \
"\n in comm field in /proc/PID/stat" \
"\n -x EXECUTABLE Match processes with this command" \
"\n command in /proc/PID/cmdline" \
"\n -p FILE Match a process with PID from the file" \
"\n All specified conditions must match" \
"\n-S only:" \
"\n -x EXECUTABLE Program to run" \
"\n -a NAME Zeroth argument" \
"\n -b Background" \
IF_FEATURE_START_STOP_DAEMON_FANCY( \
"\n -N N Change nice level" \
) \
"\n -c USER[:[GRP]] Change to user/group" \
"\n -m Write PID to the pidfile specified by -p" \
"\n-K only:" \
"\n -s SIG Signal to send" \
"\n -t Match only, exit with 0 if a process is found" \
"\nOther:" \
IF_FEATURE_START_STOP_DAEMON_FANCY( \
"\n -o Exit with status 0 if nothing is done" \
"\n -v Verbose" \
) \
"\n -q Quiet" \
) \
#define stat_trivial_usage \
"[OPTIONS] FILE..."
#define stat_full_usage "\n\n" \
"Display file (default) or filesystem status\n" \
"\nOptions:" \
IF_FEATURE_STAT_FORMAT( \
"\n -c fmt Use the specified format" \
) \
"\n -f Display filesystem status" \
"\n -L Follow links" \
"\n -t Display info in terse form" \
IF_SELINUX( \
"\n -Z Print security context" \
) \
IF_FEATURE_STAT_FORMAT( \
"\n\nValid format sequences for files:\n" \
" %a Access rights in octal\n" \
" %A Access rights in human readable form\n" \
" %b Number of blocks allocated (see %B)\n" \
" %B The size in bytes of each block reported by %b\n" \
" %d Device number in decimal\n" \
" %D Device number in hex\n" \
" %f Raw mode in hex\n" \
" %F File type\n" \
" %g Group ID of owner\n" \
" %G Group name of owner\n" \
" %h Number of hard links\n" \
" %i Inode number\n" \
" %n File name\n" \
" %N File name, with -> TARGET if symlink\n" \
" %o I/O block size\n" \
" %s Total size, in bytes\n" \
" %t Major device type in hex\n" \
" %T Minor device type in hex\n" \
" %u User ID of owner\n" \
" %U User name of owner\n" \
" %x Time of last access\n" \
" %X Time of last access as seconds since Epoch\n" \
" %y Time of last modification\n" \
" %Y Time of last modification as seconds since Epoch\n" \
" %z Time of last change\n" \
" %Z Time of last change as seconds since Epoch\n" \
"\nValid format sequences for file systems:\n" \
" %a Free blocks available to non-superuser\n" \
" %b Total data blocks in file system\n" \
" %c Total file nodes in file system\n" \
" %d Free file nodes in file system\n" \
" %f Free blocks in file system\n" \
IF_SELINUX( \
" %C Security context in selinux\n" \
) \
" %i File System ID in hex\n" \
" %l Maximum length of filenames\n" \
" %n File name\n" \
" %s Block size (for faster transfer)\n" \
" %S Fundamental block size (for block counts)\n" \
" %t Type in hex\n" \
" %T Type in human readable form" \
) \
#define strings_trivial_usage \
"[-afo] [-n LEN] [FILE]..."
#define strings_full_usage "\n\n" \
"Display printable strings in a binary file\n" \
"\nOptions:" \
"\n -a Scan whole file (default)" \
"\n -f Precede strings with filenames" \
"\n -n LEN At least LEN characters form a string (default 4)" \
"\n -o Precede strings with decimal offsets" \
#define stty_trivial_usage \
"[-a|g] [-F DEVICE] [SETTING]..."
#define stty_full_usage "\n\n" \
"Without arguments, prints baud rate, line discipline,\n" \
"and deviations from stty sane\n" \
"\nOptions:" \
"\n -F DEVICE Open device instead of stdin" \
"\n -a Print all current settings in human-readable form" \
"\n -g Print in stty-readable form" \
"\n [SETTING] See manpage" \
#define su_trivial_usage \
"[OPTIONS] [-] [USERNAME]"
#define su_full_usage "\n\n" \
"Change user id or become root\n" \
"\nOptions:" \
"\n -p,-m Preserve environment" \
"\n -c CMD Command to pass to 'sh -c'" \
"\n -s SH Shell to use instead of default shell" \
#define sulogin_trivial_usage \
"[-t N] [TTY]"
#define sulogin_full_usage "\n\n" \
"Single user login\n" \
"\nOptions:" \
"\n -t N Timeout" \
#define sum_trivial_usage \
"[-rs] [FILE]..."
#define sum_full_usage "\n\n" \
"Checksum and count the blocks in a file\n" \
"\nOptions:" \
"\n -r Use BSD sum algorithm (1K blocks)" \
"\n -s Use System V sum algorithm (512byte blocks)" \
#define sv_trivial_usage \
"[-v] [-w SEC] CMD SERVICE_DIR..."
#define sv_full_usage "\n\n" \
"Control services monitored by runsv supervisor.\n" \
"Commands (only first character is enough):\n" \
"\n" \
"status: query service status\n" \
"up: if service isn't running, start it. If service stops, restart it\n" \
"once: like 'up', but if service stops, don't restart it\n" \
"down: send TERM and CONT signals. If ./run exits, start ./finish\n" \
" if it exists. After it stops, don't restart service\n" \
"exit: send TERM and CONT signals to service and log service. If they exit,\n" \
" runsv exits too\n" \
"pause, cont, hup, alarm, interrupt, quit, 1, 2, term, kill: send\n" \
"STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" \
#define svlogd_trivial_usage \
"[-ttv] [-r C] [-R CHARS] [-l MATCHLEN] [-b BUFLEN] DIR..."
#define svlogd_full_usage "\n\n" \
"Continuously read log data from stdin, optionally\n" \
"filter log messages, and write the data to one or more automatically\n" \
"rotated logs" \
#define swapoff_trivial_usage \
"[-a] [DEVICE]"
#define swapoff_full_usage "\n\n" \
"Stop swapping on DEVICE\n" \
"\nOptions:" \
"\n -a Stop swapping on all swap devices" \
#define swapon_trivial_usage \
"[-a]" IF_FEATURE_SWAPON_PRI(" [-p PRI]") " [DEVICE]"
#define swapon_full_usage "\n\n" \
"Start swapping on DEVICE\n" \
"\nOptions:" \
"\n -a Start swapping on all swap devices" \
IF_FEATURE_SWAPON_PRI( \
"\n -p PRI Set swap device priority" \
) \
#define switch_root_trivial_usage \
"[-c /dev/console] NEW_ROOT NEW_INIT [ARGS]"
#define switch_root_full_usage "\n\n" \
"Free initramfs and switch to another root fs:\n" \
"chroot to NEW_ROOT, delete all in /, move NEW_ROOT to /,\n" \
"execute NEW_INIT. PID must be 1. NEW_ROOT must be a mountpoint.\n" \
"\nOptions:" \
"\n -c DEV Reopen stdio to DEV after switch" \
#define sync_trivial_usage \
""
#define sync_full_usage "\n\n" \
"Write all buffered blocks to disk"
#define fsync_trivial_usage \
"[OPTIONS] FILE..."
#define fsync_full_usage "\n\n" \
"Write files' buffered blocks to disk\n" \
"\nOptions:" \
"\n -d Avoid syncing metadata"
#define sysctl_trivial_usage \
"[OPTIONS] [VALUE]..."
#define sysctl_full_usage "\n\n" \
"Configure kernel parameters at runtime\n" \
"\nOptions:" \
"\n -n Don't print key names" \
"\n -e Don't warn about unknown keys" \
"\n -w Change sysctl setting" \
"\n -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)" \
"\n -a Display all values" \
"\n -A Display all values in table form" \
#define sysctl_example_usage \
"sysctl [-n] [-e] variable...\n" \
"sysctl [-n] [-e] -w variable=value...\n" \
"sysctl [-n] [-e] -a\n" \
"sysctl [-n] [-e] -p file (default /etc/sysctl.conf)\n" \
"sysctl [-n] [-e] -A\n"
#define syslogd_trivial_usage \
"[OPTIONS]"
#define syslogd_full_usage "\n\n" \
"System logging utility.\n" \
"This version of syslogd ignores /etc/syslog.conf\n" \
"\nOptions:" \
"\n -n Run in foreground" \
"\n -O FILE Log to given file (default:/var/log/messages)" \
"\n -l N Set local log level" \
"\n -S Smaller logging output" \
IF_FEATURE_ROTATE_LOGFILE( \
"\n -s SIZE Max size (KB) before rotate (default:200KB, 0=off)" \
"\n -b N N rotated logs to keep (default:1, max=99, 0=purge)") \
IF_FEATURE_REMOTE_LOG( \
"\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \
"\n -L Log locally and via network (default is network only if -R)") \
IF_FEATURE_SYSLOGD_DUP( \
"\n -D Drop duplicates") \
IF_FEATURE_IPC_SYSLOG( \
"\n -C[size(KiB)] Log to shared mem buffer (read it using logread)") \
/* NB: -Csize shouldn't have space (because size is optional) */
/* "\n -m MIN Minutes between MARK lines (default:20, 0=off)" */
#define syslogd_example_usage \
"$ syslogd -R masterlog:514\n" \
"$ syslogd -R 192.168.1.1:601\n"
#define tac_trivial_usage \
"[FILE]..."
#define tac_full_usage "\n\n" \
"Concatenate FILEs and print them in reverse"
#define taskset_trivial_usage \
"[-p] [MASK] [PID | PROG ARGS]"
#define taskset_full_usage "\n\n" \
"Set or get CPU affinity\n" \
"\nOptions:" \
"\n -p Operate on an existing PID" \
#define taskset_example_usage \
"$ taskset 0x7 ./dgemm_test&\n" \
"$ taskset -p 0x1 $!\n" \
"pid 4790's current affinity mask: 7\n" \
"pid 4790's new affinity mask: 1\n" \
"$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
"pid 6671's current affinity mask: 1\n" \
"pid 6671's new affinity mask: 1\n" \
"$ taskset -p 1\n" \
"pid 1's current affinity mask: 3\n"
#define tee_trivial_usage \
"[OPTIONS] [FILE]..."
#define tee_full_usage "\n\n" \
"Copy stdin to each FILE, and also to stdout\n" \
"\nOptions:" \
"\n -a Append to the given FILEs, don't overwrite" \
"\n -i Ignore interrupt signals (SIGINT)" \
#define tee_example_usage \
"$ echo \"Hello\" | tee /tmp/foo\n" \
"$ cat /tmp/foo\n" \
"Hello\n"
#if ENABLE_FEATURE_TELNET_AUTOLOGIN
#define telnet_trivial_usage \
"[-a] [-l USER] HOST [PORT]"
#define telnet_full_usage "\n\n" \
"Connect to telnet server\n" \
"\nOptions:" \
"\n -a Automatic login with $USER variable" \
"\n -l USER Automatic login as USER" \
#else
#define telnet_trivial_usage \
"HOST [PORT]"
#define telnet_full_usage "\n\n" \
"Connect to telnet server"
#endif
#define telnetd_trivial_usage \
"[OPTIONS]"
#define telnetd_full_usage "\n\n" \
"Handle incoming telnet connections" \
IF_NOT_FEATURE_TELNETD_STANDALONE(" via inetd") "\n" \
"\nOptions:" \
"\n -l LOGIN Exec LOGIN on connect" \
"\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \
"\n -K Close connection as soon as login exits" \
"\n (normally wait until all programs close slave pty)" \
IF_FEATURE_TELNETD_STANDALONE( \
"\n -p PORT Port to listen on" \
"\n -b ADDR[:PORT] Address to bind to" \
"\n -F Run in foreground" \
"\n -i Inetd mode" \
IF_FEATURE_TELNETD_INETD_WAIT( \
"\n -w SEC Inetd 'wait' mode, linger time SEC" \
"\n -S Log to syslog (implied by -i or without -F and -w)" \
) \
)
/* "test --help" does not print help (POSIX compat), only "[ --help" does.
* We display "<applet> EXPRESSION ]" here (not "<applet> EXPRESSION")
* Unfortunately, it screws up generated BusyBox.html. TODO. */
#define test_trivial_usage \
"EXPRESSION ]"
#define test_full_usage "\n\n" \
"Check file types, compare values etc. Return a 0/1 exit code\n" \
"depending on logical value of EXPRESSION"
#define test_example_usage \
"$ test 1 -eq 2\n" \
"$ echo $?\n" \
"1\n" \
"$ test 1 -eq 1\n" \
"$ echo $?\n" \
"0\n" \
"$ [ -d /etc ]\n" \
"$ echo $?\n" \
"0\n" \
"$ [ -d /junk ]\n" \
"$ echo $?\n" \
"1\n"
#define tc_trivial_usage \
/*"[OPTIONS] "*/"OBJECT CMD [dev STRING]"
#define tc_full_usage "\n\n" \
"OBJECT: {qdisc|class|filter}\n" \
"CMD: {add|del|change|replace|show}\n" \
"\n" \
"qdisc [ handle QHANDLE ] [ root |"IF_FEATURE_TC_INGRESS(" ingress |")" parent CLASSID ]\n" \
/* "[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
" [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
" QDISC_KIND := { [p|b]fifo | tbf | prio | cbq | red | etc. }\n" \
"qdisc show [ dev STRING ]"IF_FEATURE_TC_INGRESS(" [ingress]")"\n" \
"class [ classid CLASSID ] [ root | parent CLASSID ]\n" \
" [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
"class show [ dev STRING ] [ root | parent CLASSID ]\n" \
"filter [ pref PRIO ] [ protocol PROTO ]\n" \
/* "\t[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
" [ root | classid CLASSID ] [ handle FILTERID ]\n" \
" [ [ FILTER_TYPE ] [ help | OPTIONS ] ]\n" \
"filter show [ dev STRING ] [ root | parent CLASSID ]"
#define tcpsvd_trivial_usage \
"[-hEv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] IP PORT PROG"
/* with not-implemented options: */
/* "[-hpEvv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] [-i DIR|-x CDB] [-t SEC] IP PORT PROG" */
#define tcpsvd_full_usage "\n\n" \
"Create TCP socket, bind to IP:PORT and listen\n" \
"for incoming connection. Run PROG for each connection.\n" \
"\n IP IP to listen on. '0' = all" \
"\n PORT Port to listen on" \
"\n PROG ARGS Program to run" \
"\n -l NAME Local hostname (else looks up local hostname in DNS)" \
"\n -u USER[:GRP] Change to user/group after bind" \
"\n -c N Handle up to N connections simultaneously" \
"\n -b N Allow a backlog of approximately N TCP SYNs" \
"\n -C N[:MSG] Allow only up to N connections from the same IP" \
"\n New connections from this IP address are closed" \
"\n immediately. MSG is written to the peer before close" \
"\n -h Look up peer's hostname" \
"\n -E Don't set up environment variables" \
"\n -v Verbose" \
#define udpsvd_trivial_usage \
"[-hEv] [-c N] [-u USER] [-l NAME] IP PORT PROG"
#define udpsvd_full_usage "\n\n" \
"Create UDP socket, bind to IP:PORT and wait\n" \
"for incoming packets. Run PROG for each packet,\n" \
"redirecting all further packets with same peer ip:port to it.\n" \
"\n IP IP to listen on. '0' = all" \
"\n PORT Port to listen on" \
"\n PROG ARGS Program to run" \
"\n -l NAME Local hostname (else looks up local hostname in DNS)" \
"\n -u USER[:GRP] Change to user/group after bind" \
"\n -c N Handle up to N connections simultaneously" \
"\n -h Look up peer's hostname" \
"\n -E Don't set up environment variables" \
"\n -v Verbose" \
#define tftp_trivial_usage \
"[OPTIONS] HOST [PORT]"
#define tftp_full_usage "\n\n" \
"Transfer a file from/to tftp server\n" \
"\nOptions:" \
"\n -l FILE Local FILE" \
"\n -r FILE Remote FILE" \
IF_FEATURE_TFTP_GET( \
"\n -g Get file" \
) \
IF_FEATURE_TFTP_PUT( \
"\n -p Put file" \
) \
IF_FEATURE_TFTP_BLOCKSIZE( \
"\n -b SIZE Transfer blocks of SIZE octets" \
)
#define tftpd_trivial_usage \
"[-cr] [-u USER] [DIR]"
#define tftpd_full_usage "\n\n" \
"Transfer a file on tftp client's request\n" \
"\n" \
"tftpd should be used as an inetd service.\n" \
"tftpd's line for inetd.conf:\n" \
" 69 dgram udp nowait root tftpd tftpd /files/to/serve\n" \
"It also can be ran from udpsvd:\n" \
" udpsvd -vE 0.0.0.0 69 tftpd /files/to/serve\n" \
"\nOptions:" \
"\n -r Prohibit upload" \
"\n -c Allow file creation via upload" \
"\n -u Access files as USER" \
#define time_trivial_usage \
"[OPTIONS] PROG ARGS"
#define time_full_usage "\n\n" \
"Run PROG, display resource usage when it exits\n" \
"\nOptions:" \
"\n -v Verbose" \
#define timeout_trivial_usage \
"[-t SECS] [-s SIG] PROG ARGS"
#define timeout_full_usage "\n\n" \
"Runs PROG. Sends SIG to it if it is not gone in SECS seconds.\n" \
"Defaults: SECS: 10, SIG: TERM." \
#define top_trivial_usage \
"[-b] [-nCOUNT] [-dSECONDS]" IF_FEATURE_TOPMEM(" [-m]")
#define top_full_usage "\n\n" \
"Provide a view of process activity in real time.\n" \
"Read the status of all processes from /proc each SECONDS\n" \
"and display a screenful of them." \
//TODO: add options and keyboard commands
#define touch_trivial_usage \
"[-c] [-d DATE] FILE [FILE]..."
#define touch_full_usage "\n\n" \
"Update the last-modified date on the given FILE[s]\n" \
"\nOptions:" \
"\n -c Don't create files" \
"\n -d DT Date/time to use" \
#define touch_example_usage \
"$ ls -l /tmp/foo\n" \
"/bin/ls: /tmp/foo: No such file or directory\n" \
"$ touch /tmp/foo\n" \
"$ ls -l /tmp/foo\n" \
"-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n"
#define tr_trivial_usage \
"[-cds] STRING1 [STRING2]"
#define tr_full_usage "\n\n" \
"Translate, squeeze, or delete characters from stdin, writing to stdout\n" \
"\nOptions:" \
"\n -c Take complement of STRING1" \
"\n -d Delete input characters coded STRING1" \
"\n -s Squeeze multiple output characters of STRING2 into one character" \
#define tr_example_usage \
"$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \
"hello world\n"
#define traceroute_trivial_usage \
"[-"IF_TRACEROUTE6("46")"FIldnrv] [-f 1ST_TTL] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
" [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-g GATEWAY] [-i IFACE]\n" \
" [-z PAUSE_MSEC] HOST [BYTES]"
#define traceroute_full_usage "\n\n" \
"Trace the route to HOST\n" \
"\nOptions:" \
IF_TRACEROUTE6( \
"\n -4, -6 Force IP or IPv6 name resolution" \
) \
"\n -F Set the don't fragment bit" \
"\n -I Use ICMP ECHO instead of UDP datagrams" \
"\n -l Display the TTL value of the returned packet" \
"\n -d Set SO_DEBUG options to socket" \
"\n -n Print numeric addresses" \
"\n -r Bypass routing tables, send directly to HOST" \
"\n -v Verbose" \
"\n -m Max time-to-live (max number of hops)" \
"\n -p Base UDP port number used in probes" \
"\n (default 33434)" \
"\n -q Number of probes per TTL (default 3)" \
"\n -s IP address to use as the source address" \
"\n -t Type-of-service in probe packets (default 0)" \
"\n -w Time in seconds to wait for a response (default 3)" \
"\n -g Loose source route gateway (8 max)" \
#define traceroute6_trivial_usage \
"[-dnrv] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
" [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-i IFACE]\n" \
" HOST [BYTES]"
#define traceroute6_full_usage "\n\n" \
"Trace the route to HOST\n" \
"\nOptions:" \
"\n -d Set SO_DEBUG options to socket" \
"\n -n Print numeric addresses" \
"\n -r Bypass routing tables, send directly to HOST" \
"\n -v Verbose" \
"\n -m Max time-to-live (max number of hops)" \
"\n -p Base UDP port number used in probes" \
"\n (default is 33434)" \
"\n -q Number of probes per TTL (default 3)" \
"\n -s IP address to use as the source address" \
"\n -t Type-of-service in probe packets (default 0)" \
"\n -w Time in seconds to wait for a response (default 3)" \
#define true_trivial_usage \
""
#define true_full_usage "\n\n" \
"Return an exit code of TRUE (0)"
#define true_example_usage \
"$ true\n" \
"$ echo $?\n" \
"0\n"
#define tty_trivial_usage \
""
#define tty_full_usage "\n\n" \
"Print file name of stdin's terminal" \
IF_INCLUDE_SUSv2( "\n" \
"\nOptions:" \
"\n -s Print nothing, only return exit status" \
)
#define tty_example_usage \
"$ tty\n" \
"/dev/tty2\n"
#define ttysize_trivial_usage \
"[w] [h]"
#define ttysize_full_usage "\n\n" \
"Print dimension(s) of stdin's terminal, on error return 80x25"
#define tunctl_trivial_usage \
"[-f device] ([-t name] | -d name)" IF_FEATURE_TUNCTL_UG(" [-u owner] [-g group] [-b]")
#define tunctl_full_usage "\n\n" \
"Create or delete tun interfaces\n" \
"\nOptions:" \
"\n -f name tun device (/dev/net/tun)" \
"\n -t name Create iface 'name'" \
"\n -d name Delete iface 'name'" \
IF_FEATURE_TUNCTL_UG( \
"\n -u owner Set iface owner" \
"\n -g group Set iface group" \
"\n -b Brief output" \
)
#define tunctl_example_usage \
"# tunctl\n" \
"# tunctl -d tun0\n"
#define tune2fs_trivial_usage \
/* "[-c max-mounts-count] [-e errors-behavior] [-g group] " */ \
/* "[-i interval[d|m|w]] [-j] [-J journal-options] [-l] [-s sparse-flag] " */ \
/* "[-m reserved-blocks-percent] [-o [^]mount-options[,...]] " */ \
/* "[-r reserved-blocks-count] [-u user] [-C mount-count] " */ \
"[-L LABEL] " \
/* "[-M last-mounted-dir] [-O [^]feature[,...]] " */ \
/* "[-T last-check-time] [-U UUID] " */ \
"BLOCKDEV"
#define tune2fs_full_usage "\n\n" \
"Adjust filesystem options on ext[23] filesystems"
#if defined CONFIG_UDHCP_DEBUG && CONFIG_UDHCP_DEBUG >= 1
# define IF_UDHCP_VERBOSE(...) __VA_ARGS__
#else
# define IF_UDHCP_VERBOSE(...)
#endif
#define udhcpc_trivial_usage \
"[-fbnq"IF_UDHCP_VERBOSE("v")"oCR] [-i IFACE] [-r IP] [-s PROG] [-p PIDFILE]\n" \
" [-H HOSTNAME] [-c CID] [-V VENDOR] [-O DHCP_OPT]..." IF_FEATURE_UDHCP_PORT(" [-P N]")
#define udhcpc_full_usage "\n" \
IF_LONG_OPTS( \
"\n -i,--interface IFACE Interface to use (default eth0)" \
"\n -p,--pidfile FILE Create pidfile" \
"\n -r,--request IP IP address to request" \
"\n -s,--script PROG Run PROG at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
"\n -t,--retries N Send up to N discover packets" \
"\n -T,--timeout N Pause between packets (default 3 seconds)" \
"\n -A,--tryagain N Wait N seconds after failure (default 20)" \
"\n -f,--foreground Run in foreground" \
USE_FOR_MMU( \
"\n -b,--background Background if lease is not obtained" \
) \
"\n -S,--syslog Log to syslog too" \
"\n -n,--now Exit if lease is not obtained" \
"\n -q,--quit Exit after obtaining lease" \
"\n -R,--release Release IP on exit" \
IF_FEATURE_UDHCP_PORT( \
"\n -P,--client-port N Use port N (default 68)" \
) \
IF_FEATURE_UDHCPC_ARPING( \
"\n -a,--arping Use arping to validate offered address" \
) \
"\n -O,--request-option OPT Request DHCP option OPT (cumulative)" \
"\n -o,--no-default-options Don't request any options (unless -O is given)" \
"\n -x OPT:VAL Include option OPT in sent packets (cumulative)" \
"\n -F,--fqdn NAME Ask server to update DNS mapping for NAME" \
"\n -H,-h,--hostname NAME Send NAME as client hostname (default none)" \
"\n -V,--vendorclass VENDOR Vendor identifier (default 'udhcp VERSION')" \
"\n -c,--clientid CLIENTID Client identifier (default own MAC)" \
"\n -C,--clientid-none Don't send client identifier" \
IF_UDHCP_VERBOSE( \
"\n -v Verbose" \
) \
) \
IF_NOT_LONG_OPTS( \
"\n -i IFACE Interface to use (default eth0)" \
"\n -p FILE Create pidfile" \
"\n -r IP IP address to request" \
"\n -s PROG Run PROG at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
"\n -t N Send up to N discover packets" \
"\n -T N Pause between packets (default 3 seconds)" \
"\n -A N Wait N seconds (default 20) after failure" \
"\n -x OPT:VAL Include option OPT in sent packets" \
"\n -O OPT Request DHCP option OPT (cumulative)" \
"\n -o Don't request any options (unless -O is given)" \
"\n -f Run in foreground" \
USE_FOR_MMU( \
"\n -b Background if lease is not obtained" \
) \
"\n -S Log to syslog too" \
"\n -n Exit if lease is not obtained" \
"\n -q Exit after obtaining lease" \
"\n -R Release IP on exit" \
IF_FEATURE_UDHCP_PORT( \
"\n -P N Use port N (default 68)" \
) \
IF_FEATURE_UDHCPC_ARPING( \
"\n -a Use arping to validate offered address" \
) \
"\n -F NAME Ask server to update DNS mapping for NAME" \
"\n -H,-h NAME Send NAME as client hostname (default none)" \
"\n -V VENDOR Vendor identifier (default 'udhcp VERSION')" \
"\n -c CLIENTID Client identifier (default own MAC)" \
"\n -C Don't send client identifier" \
IF_UDHCP_VERBOSE( \
"\n -v Verbose" \
) \
) \
#define udhcpd_trivial_usage \
"[-fS]" IF_FEATURE_UDHCP_PORT(" [-P N]") " [CONFFILE]" \
#define udhcpd_full_usage "\n\n" \
"DHCP server\n" \
"\n -f Run in foreground" \
"\n -S Log to syslog too" \
IF_FEATURE_UDHCP_PORT( \
"\n -P N Use port N (default 67)" \
)
#define umount_trivial_usage \
"[OPTIONS] FILESYSTEM|DIRECTORY"
#define umount_full_usage "\n\n" \
"Unmount file systems\n" \
"\nOptions:" \
IF_FEATURE_UMOUNT_ALL( \
"\n -a Unmount all file systems" IF_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \
) \
IF_FEATURE_MTAB_SUPPORT( \
"\n -n Don't erase /etc/mtab entries" \
) \
"\n -r Try to remount devices as read-only if mount is busy" \
"\n -l Lazy umount (detach filesystem)" \
"\n -f Force umount (i.e., unreachable NFS server)" \
IF_FEATURE_MOUNT_LOOP( \
"\n -d Free loop device if it has been used" \
)
#define umount_example_usage \
"$ umount /dev/hdc1\n"
#define uname_trivial_usage \
"[-amnrspv]"
#define uname_full_usage "\n\n" \
"Print system information\n" \
"\nOptions:" \
"\n -a Print all" \
"\n -m The machine (hardware) type" \
"\n -n Hostname" \
"\n -r OS release" \
"\n -s OS name (default)" \
"\n -p Processor type" \
"\n -v OS version" \
#define uname_example_usage \
"$ uname -a\n" \
"Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
#define uncompress_trivial_usage \
"[-cf] [FILE]..."
#define uncompress_full_usage "\n\n" \
"Decompress .Z file[s]\n" \
"\nOptions:" \
"\n -c Write to stdout" \
"\n -f Overwrite" \
#define unexpand_trivial_usage \
"[-fa][-t N] [FILE]..."
#define unexpand_full_usage "\n\n" \
"Convert spaces to tabs, writing to stdout\n" \
"\nOptions:" \
IF_FEATURE_UNEXPAND_LONG_OPTIONS( \
"\n -a,--all Convert all blanks" \
"\n -f,--first-only Convert only leading blanks" \
"\n -t,--tabs=N Tabstops every N chars" \
) \
IF_NOT_FEATURE_UNEXPAND_LONG_OPTIONS( \
"\n -a Convert all blanks" \
"\n -f Convert only leading blanks" \
"\n -t N Tabstops every N chars" \
)
#define uniq_trivial_usage \
"[-cdu][-f,s,w N] [INPUT [OUTPUT]]"
#define uniq_full_usage "\n\n" \
"Discard duplicate lines\n" \
"\nOptions:" \
"\n -c Prefix lines by the number of occurrences" \
"\n -d Only print duplicate lines" \
"\n -u Only print unique lines" \
"\n -f N Skip first N fields" \
"\n -s N Skip first N chars (after any skipped fields)" \
"\n -w N Compare N characters in line" \
#define uniq_example_usage \
"$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
"a\n" \
"b\n" \
"c\n"
#define unzip_trivial_usage \
"[-opts[modifiers]] FILE[.zip] [LIST] [-x XLIST] [-d DIR]"
#define unzip_full_usage "\n\n" \
"Extract files from ZIP archives\n" \
"\nOptions:" \
"\n -l List archive contents (with -q for short form)" \
"\n -n Never overwrite files (default)" \
"\n -o Overwrite" \
"\n -p Send output to stdout" \
"\n -q Quiet" \
"\n -x XLST Exclude these files" \
"\n -d DIR Extract files into DIR" \
#define uptime_trivial_usage \
""
#define uptime_full_usage "\n\n" \
"Display the time since the last boot"
#define uptime_example_usage \
"$ uptime\n" \
" 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
#define usleep_trivial_usage \
"N"
#define usleep_full_usage "\n\n" \
"Pause for N microseconds"
#define usleep_example_usage \
"$ usleep 1000000\n" \
"[pauses for 1 second]\n"
#define uudecode_trivial_usage \
"[-o OUTFILE] [INFILE]"
#define uudecode_full_usage "\n\n" \
"Uudecode a file\n" \
"Finds outfile name in uuencoded source unless -o is given"
#define uudecode_example_usage \
"$ uudecode -o busybox busybox.uu\n" \
"$ ls -l busybox\n" \
"-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
#define uuencode_trivial_usage \
"[-m] [INFILE] STORED_FILENAME"
#define uuencode_full_usage "\n\n" \
"Uuencode a file to stdout\n" \
"\nOptions:" \
"\n -m Use base64 encoding per RFC1521" \
#define uuencode_example_usage \
"$ uuencode busybox busybox\n" \
"begin 755 busybox\n" \
"<encoded file snipped>\n" \
"$ uudecode busybox busybox > busybox.uu\n" \
"$\n"
#define vconfig_trivial_usage \
"COMMAND [OPTIONS]"
#define vconfig_full_usage "\n\n" \
"Create and remove virtual ethernet devices\n" \
"\nOptions:" \
"\n add [interface-name] [vlan_id]" \
"\n rem [vlan-name]" \
"\n set_flag [interface-name] [flag-num] [0 | 1]" \
"\n set_egress_map [vlan-name] [skb_priority] [vlan_qos]" \
"\n set_ingress_map [vlan-name] [skb_priority] [vlan_qos]" \
"\n set_name_type [name-type]" \
#define vi_trivial_usage \
"[OPTIONS] [FILE]..."
#define vi_full_usage "\n\n" \
"Edit FILE\n" \
"\nOptions:" \
IF_FEATURE_VI_COLON( \
"\n -c Initial command to run ($EXINIT also available)") \
IF_FEATURE_VI_READONLY( \
"\n -R Read-only") \
"\n -H Short help regarding available features" \
#define vlock_trivial_usage \
"[OPTIONS]"
#define vlock_full_usage "\n\n" \
"Lock a virtual terminal. A password is required to unlock.\n" \
"\nOptions:" \
"\n -a Lock all VTs" \
#define volname_trivial_usage \
"[DEVICE]"
#define volname_full_usage "\n\n" \
"Show CD volume name of the DEVICE (default /dev/cdrom)"
#define wall_trivial_usage \
"[FILE]"
#define wall_full_usage "\n\n" \
"Write content of FILE or stdin to all logged-in users"
#define wall_sample_usage \
"echo foo | wall\n" \
"wall ./mymessage"
#define watch_trivial_usage \
"[-n SEC] [-t] PROG ARGS"
#define watch_full_usage "\n\n" \
"Run PROG periodically\n" \
"\nOptions:" \
"\n -n Loop period in seconds (default 2)" \
"\n -t Don't print header" \
#define watch_example_usage \
"$ watch date\n" \
"Mon Dec 17 10:31:40 GMT 2000\n" \
"Mon Dec 17 10:31:42 GMT 2000\n" \
"Mon Dec 17 10:31:44 GMT 2000"
#define watchdog_trivial_usage \
"[-t N[ms]] [-T N[ms]] [-F] DEV"
#define watchdog_full_usage "\n\n" \
"Periodically write to watchdog device DEV\n" \
"\nOptions:" \
"\n -T N Reboot after N seconds if not reset (default 60)" \
"\n -t N Reset every N seconds (default 30)" \
"\n -F Run in foreground" \
"\n" \
"\nUse 500ms to specify period in milliseconds" \
#define wc_trivial_usage \
"[OPTIONS] [FILE]..."
#define wc_full_usage "\n\n" \
"Print line, word, and byte counts for each FILE (or stdin),\n" \
"and a total line if more than one FILE is specified\n" \
"\nOptions:" \
"\n -c Print the byte counts" \
"\n -l Print the newline counts" \
"\n -L Print the length of the longest line" \
"\n -w Print the word counts" \
#define wc_example_usage \
"$ wc /etc/passwd\n" \
" 31 46 1365 /etc/passwd\n"
#define wget_trivial_usage \
IF_FEATURE_WGET_LONG_OPTIONS( \
"[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document FILE]\n" \
" [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
" [--no-check-certificate] [-U|--user-agent AGENT]" \
IF_FEATURE_WGET_TIMEOUT("[-T SEC] ") " URL" \
) \
IF_NOT_FEATURE_WGET_LONG_OPTIONS( \
"[-csq] [-O FILE] [-Y on/off] [-P DIR] [-U AGENT]" \
IF_FEATURE_WGET_TIMEOUT("[-T SEC] ") " URL" \
)
#define wget_full_usage "\n\n" \
"Retrieve files via HTTP or FTP\n" \
"\nOptions:" \
"\n -s Spider mode - only check file existence" \
"\n -c Continue retrieval of aborted transfer" \
"\n -q Quiet" \
"\n -P DIR Save to DIR (default .)" \
IF_FEATURE_WGET_TIMEOUT( \
"\n -T SEC Network read timeout is SEC seconds" \
) \
"\n -O FILE Save to FILE ('-' for stdout)" \
"\n -U STR Use STR for User-Agent header" \
"\n -Y Use proxy ('on' or 'off')" \
#define which_trivial_usage \
"[COMMAND]..."
#define which_full_usage "\n\n" \
"Locate a COMMAND"
#define which_example_usage \
"$ which login\n" \
"/bin/login\n"
#define who_trivial_usage \
"[-a]"
#define who_full_usage "\n\n" \
"Show who is logged on\n" \
"\nOptions:" \
"\n -a Show all" \
#define whoami_trivial_usage \
""
#define whoami_full_usage "\n\n" \
"Print the user name associated with the current effective user id"
#define zcat_trivial_usage \
"FILE"
#define zcat_full_usage "\n\n" \
"Decompress to stdout"
#define zcip_trivial_usage \
"[OPTIONS] IFACE SCRIPT"
#define zcip_full_usage "\n\n" \
"Manage a ZeroConf IPv4 link-local address\n" \
"\nOptions:" \
"\n -f Run in foreground" \
"\n -q Quit after obtaining address" \
"\n -r 169.254.x.x Request this address first" \
"\n -v Verbose" \
"\n" \
"\nWith no -q, runs continuously monitoring for ARP conflicts," \
"\nexits only on I/O errors (link down etc)" \
#endif