116 lines
2.8 KiB
Plaintext
116 lines
2.8 KiB
Plaintext
# Sample udhcpd configuration file (/etc/udhcpd.conf)
|
|
|
|
# The start and end of the IP lease block
|
|
|
|
start 192.168.0.20 #default: 192.168.0.20
|
|
end 192.168.0.254 #default: 192.168.0.254
|
|
|
|
|
|
# The interface that udhcpd will use
|
|
|
|
interface eth0 #default: eth0
|
|
|
|
|
|
# The maximim number of leases (includes addressesd reserved
|
|
# by OFFER's, DECLINE's, and ARP conficts
|
|
|
|
#max_leases 254 #default: 254
|
|
|
|
|
|
# If remaining is true (default), udhcpd will store the time
|
|
# remaining for each lease in the udhcpd leases file. This is
|
|
# for embedded systems that cannot keep time between reboots.
|
|
# If you set remaining to no, the absolute time that the lease
|
|
# expires at will be stored in the dhcpd.leases file.
|
|
|
|
#remaining yes #default: yes
|
|
|
|
|
|
# The time period at which udhcpd will write out a dhcpd.leases
|
|
# file. If this is 0, udhcpd will never automatically write a
|
|
# lease file. (specified in seconds)
|
|
|
|
#auto_time 7200 #default: 7200 (2 hours)
|
|
|
|
|
|
# The amount of time that an IP will be reserved (leased) for if a
|
|
# DHCP decline message is received (seconds).
|
|
|
|
#decline_time 3600 #default: 3600 (1 hour)
|
|
|
|
|
|
# The amount of time that an IP will be reserved (leased) for if an
|
|
# ARP conflct occurs. (seconds
|
|
|
|
#conflict_time 3600 #default: 3600 (1 hour)
|
|
|
|
|
|
# How long an offered address is reserved (leased) in seconds
|
|
|
|
#offer_time 60 #default: 60 (1 minute)
|
|
|
|
# If a lease to be given is below this value, the full lease time is
|
|
# instead used (seconds).
|
|
|
|
#min_lease 60 #defult: 60
|
|
|
|
|
|
# The location of the leases file
|
|
|
|
#lease_file /var/lib/misc/udhcpd.leases #defualt: /var/lib/misc/udhcpd.leases
|
|
|
|
# The location of the pid file
|
|
#pidfile /var/run/udhcpd.pid #default: /var/run/udhcpd.pid
|
|
|
|
# Everytime udhcpd writes a leases file, the below script will be called.
|
|
# Useful for writing the lease file to flash every few hours.
|
|
|
|
#notify_file #default: (no script)
|
|
|
|
#notify_file dumpleases # <--- usefull for debugging
|
|
|
|
# The following are bootp specific options, setable by udhcpd.
|
|
|
|
#siaddr 192.168.0.22 #default: 0.0.0.0
|
|
|
|
#sname zorak #default: (none)
|
|
|
|
#boot_file /var/nfs_root #default: (none)
|
|
|
|
# The remainer of options are DHCP options and can be specifed with the
|
|
# keyword 'opt' or 'option'. If an option can take multiple items, such
|
|
# as the dns option, they can be listed on the same line, or multiple
|
|
# lines. The only option with a default is 'lease'.
|
|
|
|
#Examles
|
|
opt dns 192.168.10.2 192.168.10.10
|
|
option subnet 255.255.255.0
|
|
opt router 192.168.10.2
|
|
opt wins 192.168.10.10
|
|
option dns 129.219.13.81 # appened to above DNS servers for a total of 3
|
|
option domain local
|
|
option lease 864000 # 10 days of seconds
|
|
|
|
|
|
# Currently supported options, for more info, see options.c
|
|
#subnet
|
|
#timezone
|
|
#router
|
|
#timesvr
|
|
#namesvr
|
|
#dns
|
|
#logsvr
|
|
#cookiesvr
|
|
#lprsvr
|
|
#bootsize
|
|
#domain
|
|
#swapsvr
|
|
#rootpath
|
|
#ipttl
|
|
#mtu
|
|
#broadcast
|
|
#wins
|
|
#lease
|
|
#ntpsrv
|
|
#tftp
|
|
#bootfile |