busybox/networking/route.c
James Byrne 6937487be7 libbb: reduce the overhead of single parameter bb_error_msg() calls
Back in 2007, commit 0c97c9d437 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().

This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.

Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.

This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.

The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):

Arm:     -92 bytes
MIPS:    -52 bytes
PPC:   -1836 bytes
x86_64: -938 bytes

Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 11:35:03 +02:00

727 lines
18 KiB
C

/* vi: set sw=4 ts=4: */
/*
* route
*
* Similar to the standard Unix route, but with only the necessary
* parts for AF_INET and AF_INET6
*
* Bjorn Wesen, Axis Communications AB
*
* Author of the original route:
* Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
* (derived from FvK's 'route.c 1.70 01/04/94')
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*
*
* displayroute() code added by Vladimir N. Oleynik <dzo@simtreas.ru>
* adjustments by Larry Doolittle <LRDoolittle@lbl.gov>
*
* IPV6 support added by Bart Visscher <magick@linux-fan.com>
*/
/* 2004/03/09 Manuel Novoa III <mjn3@codepoet.org>
*
* Rewritten to fix several bugs, add additional error checking, and
* remove ridiculous amounts of bloat.
*/
//config:config ROUTE
//config: bool "route (8.7 kb)"
//config: default y
//config: select PLATFORM_LINUX
//config: help
//config: Route displays or manipulates the kernel's IP routing tables.
//applet:IF_ROUTE(APPLET(route, BB_DIR_SBIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_ROUTE) += route.o
//usage:#define route_trivial_usage
//usage: "[{add|del|delete}]"
//usage:#define route_full_usage "\n\n"
//usage: "Edit kernel routing tables\n"
//usage: "\n -n Don't resolve names"
//usage: "\n -e Display other/more information"
//usage: "\n -A inet" IF_FEATURE_IPV6("{6}") " Select address family"
#include <net/route.h>
#include <net/if.h>
#include "libbb.h"
#include "inet_common.h"
#ifndef RTF_UP
/* Keep this in sync with /usr/src/linux/include/linux/route.h */
#define RTF_UP 0x0001 /* route usable */
#define RTF_GATEWAY 0x0002 /* destination is a gateway */
#define RTF_HOST 0x0004 /* host entry (net otherwise) */
#define RTF_REINSTATE 0x0008 /* reinstate route after tmout */
#define RTF_DYNAMIC 0x0010 /* created dyn. (by redirect) */
#define RTF_MODIFIED 0x0020 /* modified dyn. (by redirect) */
#define RTF_MTU 0x0040 /* specific MTU for this route */
#ifndef RTF_MSS
#define RTF_MSS RTF_MTU /* Compatibility :-( */
#endif
#define RTF_WINDOW 0x0080 /* per route window clamping */
#define RTF_IRTT 0x0100 /* Initial round trip time */
#define RTF_REJECT 0x0200 /* Reject route */
#define RTF_NONEXTHOP 0x00200000 /* route with no nexthop */
#endif
#if defined(SIOCADDRTOLD) || defined(RTF_IRTT) /* route */
#define HAVE_NEW_ADDRT 1
#endif
#if HAVE_NEW_ADDRT
#define mask_in_addr(x) (((struct sockaddr_in *)&((x).rt_genmask))->sin_addr.s_addr)
#define full_mask(x) (x)
#else
#define mask_in_addr(x) ((x).rt_genmask)
#define full_mask(x) (((struct sockaddr_in *)&(x))->sin_addr.s_addr)
#endif
/* The RTACTION entries must agree with tbl_verb[] below! */
#define RTACTION_ADD 1
#define RTACTION_DEL 2
/* For the various tbl_*[] arrays, the 1st byte is the offset to
* the next entry and the 2nd byte is return value. */
#define NET_FLAG 1
#define HOST_FLAG 2
/* We remap '-' to '#' to avoid problems with getopt. */
static const char tbl_hash_net_host[] ALIGN1 =
"\007\001#net\0"
/* "\010\002#host\0" */
"\007\002#host" /* Since last, we can save a byte. */
;
#define KW_TAKES_ARG 020
#define KW_SETS_FLAG 040
#define KW_IPVx_METRIC 020
#define KW_IPVx_NETMASK 021
#define KW_IPVx_GATEWAY 022
#define KW_IPVx_MSS 023
#define KW_IPVx_WINDOW 024
#define KW_IPVx_IRTT 025
#define KW_IPVx_DEVICE 026
#define KW_IPVx_FLAG_ONLY 040
#define KW_IPVx_REJECT 040
#define KW_IPVx_MOD 041
#define KW_IPVx_DYN 042
#define KW_IPVx_REINSTATE 043
static const char tbl_ipvx[] ALIGN1 =
/* 020 is the "takes an arg" bit */
#if HAVE_NEW_ADDRT
"\011\020metric\0"
#endif
"\012\021netmask\0"
"\005\022gw\0"
"\012\022gateway\0"
"\006\023mss\0"
"\011\024window\0"
#ifdef RTF_IRTT
"\007\025irtt\0"
#endif
"\006\026dev\0"
"\011\026device\0"
/* 040 is the "sets a flag" bit - MUST match flags_ipvx[] values below. */
#ifdef RTF_REJECT
"\011\040reject\0"
#endif
"\006\041mod\0"
"\006\042dyn\0"
/* "\014\043reinstate\0" */
"\013\043reinstate" /* Since last, we can save a byte. */
;
static const uint16_t flags_ipvx[] = { /* MUST match tbl_ipvx[] values above. */
#ifdef RTF_REJECT
RTF_REJECT,
#endif
RTF_MODIFIED,
RTF_DYNAMIC,
RTF_REINSTATE
};
static int kw_lookup(const char *kwtbl, char ***pargs)
{
if (**pargs) {
do {
if (strcmp(kwtbl+2, **pargs) == 0) { /* Found a match. */
*pargs += 1;
if (kwtbl[1] & KW_TAKES_ARG) {
if (!**pargs) { /* No more args! */
bb_show_usage();
}
*pargs += 1; /* Calling routine will use args[-1]. */
}
return kwtbl[1];
}
kwtbl += *kwtbl;
} while (*kwtbl);
}
return 0;
}
/* Add or delete a route, depending on action. */
static NOINLINE void INET_setroute(int action, char **args)
{
/* char buffer instead of bona-fide struct avoids aliasing warning */
char rt_buf[sizeof(struct rtentry)];
struct rtentry *const rt = (void *)rt_buf;
const char *netmask = NULL;
int skfd, isnet, xflag;
/* Grab the -net or -host options. Remember they were transformed. */
xflag = kw_lookup(tbl_hash_net_host, &args);
/* If we did grab -net or -host, make sure we still have an arg left. */
if (*args == NULL) {
bb_show_usage();
}
/* Clean out the RTREQ structure. */
memset(rt, 0, sizeof(*rt));
{
const char *target = *args++;
char *prefix;
/* recognize x.x.x.x/mask format. */
prefix = strchr(target, '/');
if (prefix) {
int prefix_len;
prefix_len = xatoul_range(prefix+1, 0, 32);
mask_in_addr(*rt) = htonl( ~(0xffffffffUL >> prefix_len));
*prefix = '\0';
#if HAVE_NEW_ADDRT
rt->rt_genmask.sa_family = AF_INET;
#endif
} else {
/* Default netmask. */
netmask = "default";
}
/* Prefer hostname lookup is -host flag (xflag==1) was given. */
isnet = INET_resolve(target, (struct sockaddr_in *) &rt->rt_dst,
(xflag & HOST_FLAG));
if (isnet < 0) {
bb_error_msg_and_die("resolving %s", target);
}
if (prefix) {
/* do not destroy prefix for process args */
*prefix = '/';
}
}
if (xflag) { /* Reinit isnet if -net or -host was specified. */
isnet = (xflag & NET_FLAG);
}
/* Fill in the other fields. */
rt->rt_flags = ((isnet) ? RTF_UP : (RTF_UP | RTF_HOST));
while (*args) {
int k = kw_lookup(tbl_ipvx, &args);
const char *args_m1 = args[-1];
if (k & KW_IPVx_FLAG_ONLY) {
rt->rt_flags |= flags_ipvx[k & 3];
continue;
}
#if HAVE_NEW_ADDRT
if (k == KW_IPVx_METRIC) {
rt->rt_metric = xatoul(args_m1) + 1;
continue;
}
#endif
if (k == KW_IPVx_NETMASK) {
struct sockaddr mask;
if (mask_in_addr(*rt)) {
bb_show_usage();
}
netmask = args_m1;
isnet = INET_resolve(netmask, (struct sockaddr_in *) &mask, 0);
if (isnet < 0) {
bb_error_msg_and_die("resolving %s", netmask);
}
rt->rt_genmask = full_mask(mask);
continue;
}
if (k == KW_IPVx_GATEWAY) {
if (rt->rt_flags & RTF_GATEWAY) {
bb_show_usage();
}
isnet = INET_resolve(args_m1,
(struct sockaddr_in *) &rt->rt_gateway, 1);
rt->rt_flags |= RTF_GATEWAY;
if (isnet) {
if (isnet < 0) {
bb_error_msg_and_die("resolving %s", args_m1);
}
bb_error_msg_and_die("gateway %s is a NETWORK", args_m1);
}
continue;
}
if (k == KW_IPVx_MSS) { /* Check valid MSS bounds. */
rt->rt_flags |= RTF_MSS;
rt->rt_mss = xatoul_range(args_m1, 64, 32768);
continue;
}
if (k == KW_IPVx_WINDOW) { /* Check valid window bounds. */
rt->rt_flags |= RTF_WINDOW;
rt->rt_window = xatoul_range(args_m1, 128, INT_MAX);
continue;
}
#ifdef RTF_IRTT
if (k == KW_IPVx_IRTT) {
rt->rt_flags |= RTF_IRTT;
rt->rt_irtt = xatoul(args_m1);
rt->rt_irtt *= (bb_clk_tck() / 100); /* FIXME */
#if 0 /* FIXME: do we need to check anything of this? */
if (rt->rt_irtt < 1 || rt->rt_irtt > (120 * HZ)) {
bb_error_msg_and_die("bad irtt");
}
#endif
continue;
}
#endif
/* Device is special in that it can be the last arg specified
* and doesn't require the dev/device keyword in that case. */
if (!rt->rt_dev && ((k == KW_IPVx_DEVICE) || (!k && !*++args))) {
/* Don't use args_m1 here since args may have changed! */
rt->rt_dev = args[-1];
continue;
}
/* Nothing matched. */
bb_show_usage();
}
#ifdef RTF_REJECT
if ((rt->rt_flags & RTF_REJECT) && !rt->rt_dev) {
rt->rt_dev = (char*)"lo";
}
#endif
/* sanity checks.. */
if (mask_in_addr(*rt)) {
uint32_t mask = mask_in_addr(*rt);
mask = ~ntohl(mask);
if ((rt->rt_flags & RTF_HOST) && mask != 0xffffffff) {
bb_error_msg_and_die("netmask %.8x and host route conflict",
(unsigned int) mask);
}
if (mask & (mask + 1)) {
bb_error_msg_and_die("bogus netmask %s", netmask);
}
mask = ((struct sockaddr_in *) &rt->rt_dst)->sin_addr.s_addr;
if (mask & ~(uint32_t)mask_in_addr(*rt)) {
bb_simple_error_msg_and_die("netmask and route address conflict");
}
}
/* Fill out netmask if still unset */
if ((action == RTACTION_ADD) && (rt->rt_flags & RTF_HOST)) {
mask_in_addr(*rt) = 0xffffffff;
}
/* Create a socket to the INET kernel. */
skfd = xsocket(AF_INET, SOCK_DGRAM, 0);
if (action == RTACTION_ADD)
xioctl(skfd, SIOCADDRT, rt);
else
xioctl(skfd, SIOCDELRT, rt);
if (ENABLE_FEATURE_CLEAN_UP) close(skfd);
}
#if ENABLE_FEATURE_IPV6
static NOINLINE void INET6_setroute(int action, char **args)
{
struct sockaddr_in6 sa6;
struct in6_rtmsg rt;
int prefix_len, skfd;
const char *devname;
/* We know args isn't NULL from the check in route_main. */
const char *target = *args++;
if (strcmp(target, "default") == 0) {
prefix_len = 0;
memset(&sa6, 0, sizeof(sa6));
} else {
char *cp;
cp = strchr(target, '/'); /* Yes... const to non is ok. */
if (cp) {
*cp = '\0';
prefix_len = xatoul_range(cp + 1, 0, 128);
} else {
prefix_len = 128;
}
if (INET6_resolve(target, (struct sockaddr_in6 *) &sa6) < 0) {
bb_error_msg_and_die("resolving %s", target);
}
}
/* Clean out the RTREQ structure. */
memset(&rt, 0, sizeof(rt));
memcpy(&rt.rtmsg_dst, sa6.sin6_addr.s6_addr, sizeof(struct in6_addr));
/* Fill in the other fields. */
rt.rtmsg_dst_len = prefix_len;
rt.rtmsg_flags = ((prefix_len == 128) ? (RTF_UP|RTF_HOST) : RTF_UP);
rt.rtmsg_metric = 1;
devname = NULL;
while (*args) {
int k = kw_lookup(tbl_ipvx, &args);
const char *args_m1 = args[-1];
if ((k == KW_IPVx_MOD) || (k == KW_IPVx_DYN)) {
rt.rtmsg_flags |= flags_ipvx[k & 3];
continue;
}
if (k == KW_IPVx_METRIC) {
rt.rtmsg_metric = xatoul(args_m1);
continue;
}
if (k == KW_IPVx_GATEWAY) {
if (rt.rtmsg_flags & RTF_GATEWAY) {
bb_show_usage();
}
if (INET6_resolve(args_m1, (struct sockaddr_in6 *) &sa6) < 0) {
bb_error_msg_and_die("resolving %s", args_m1);
}
memcpy(&rt.rtmsg_gateway, sa6.sin6_addr.s6_addr,
sizeof(struct in6_addr));
rt.rtmsg_flags |= RTF_GATEWAY;
continue;
}
/* Device is special in that it can be the last arg specified
* and doesn't require the dev/device keyword in that case. */
if (!devname && ((k == KW_IPVx_DEVICE) || (!k && !*++args))) {
/* Don't use args_m1 here since args may have changed! */
devname = args[-1];
continue;
}
/* Nothing matched. */
bb_show_usage();
}
/* Create a socket to the INET6 kernel. */
skfd = xsocket(AF_INET6, SOCK_DGRAM, 0);
rt.rtmsg_ifindex = 0;
if (devname) {
struct ifreq ifr;
/*memset(&ifr, 0, sizeof(ifr)); - SIOCGIFINDEX does not need to clear all */
strncpy_IFNAMSIZ(ifr.ifr_name, devname);
xioctl(skfd, SIOCGIFINDEX, &ifr);
rt.rtmsg_ifindex = ifr.ifr_ifindex;
}
/* Tell the kernel to accept this route. */
if (action == RTACTION_ADD)
xioctl(skfd, SIOCADDRT, &rt);
else
xioctl(skfd, SIOCDELRT, &rt);
if (ENABLE_FEATURE_CLEAN_UP) close(skfd);
}
#endif
static const
IF_NOT_FEATURE_IPV6(uint16_t)
IF_FEATURE_IPV6(unsigned)
flagvals[] = { /* Must agree with flagchars[]. */
RTF_UP,
RTF_GATEWAY,
RTF_HOST,
RTF_REINSTATE,
RTF_DYNAMIC,
RTF_MODIFIED,
#if ENABLE_FEATURE_IPV6
RTF_DEFAULT,
RTF_ADDRCONF,
RTF_CACHE,
RTF_REJECT,
RTF_NONEXTHOP, /* this one doesn't fit into 16 bits */
#endif
};
/* Must agree with flagvals[]. */
static const char flagchars[] ALIGN1 =
"UGHRDM"
#if ENABLE_FEATURE_IPV6
"DAC!n"
#endif
;
#define IPV4_MASK (RTF_UP|RTF_GATEWAY|RTF_HOST|RTF_REINSTATE|RTF_DYNAMIC|RTF_MODIFIED)
#define IPV6_MASK (RTF_UP|RTF_GATEWAY|RTF_HOST|RTF_DEFAULT|RTF_ADDRCONF|RTF_CACHE|RTF_REJECT|RTF_NONEXTHOP)
static void set_flags(char *flagstr, int flags)
{
int i;
for (i = 0; (*flagstr = flagchars[i]) != 0; i++) {
if (flags & flagvals[i]) {
++flagstr;
}
}
}
/* also used in netstat */
void FAST_FUNC bb_displayroutes(int noresolve, int netstatfmt)
{
char devname[64], flags[16], *sdest, *sgw;
unsigned long d, g, m;
int r;
int flgs, ref, use, metric, mtu, win, ir;
struct sockaddr_in s_addr;
struct in_addr mask;
FILE *fp = xfopen_for_read("/proc/net/route");
printf("Kernel IP routing table\n"
"Destination Gateway Genmask Flags %s Iface\n",
netstatfmt ? " MSS Window irtt" : "Metric Ref Use");
/* Skip the first line. */
r = fscanf(fp, "%*[^\n]\n");
if (r < 0) {
/* Empty line, read error, or EOF. Yes, if routing table
* is completely empty, /proc/net/route has no header.
*/
goto ERROR;
}
while (1) {
r = fscanf(fp, "%63s%lx%lx%X%d%d%d%lx%d%d%d\n",
devname, &d, &g, &flgs, &ref, &use, &metric, &m,
&mtu, &win, &ir);
if (r != 11) {
ERROR:
if ((r < 0) && feof(fp)) { /* EOF with no (nonspace) chars read. */
break;
}
bb_simple_perror_msg_and_die(bb_msg_read_error);
}
if (!(flgs & RTF_UP)) { /* Skip interfaces that are down. */
continue;
}
set_flags(flags, (flgs & IPV4_MASK));
#ifdef RTF_REJECT
if (flgs & RTF_REJECT) {
flags[0] = '!';
}
#endif
memset(&s_addr, 0, sizeof(struct sockaddr_in));
s_addr.sin_family = AF_INET;
s_addr.sin_addr.s_addr = d;
sdest = INET_rresolve(&s_addr, (noresolve | 0x8000), m); /* 'default' instead of '*' */
s_addr.sin_addr.s_addr = g;
sgw = INET_rresolve(&s_addr, (noresolve | 0x4000), m); /* Host instead of net */
mask.s_addr = m;
/* "%15.15s" truncates hostnames, do we really want that? */
printf("%-15.15s %-15.15s %-16s%-6s", sdest, sgw, inet_ntoa(mask), flags);
free(sdest);
free(sgw);
if (netstatfmt) {
printf("%5d %-5d %6d %s\n", mtu, win, ir, devname);
} else {
printf("%-6d %-2d %7d %s\n", metric, ref, use, devname);
}
}
fclose(fp);
}
#if ENABLE_FEATURE_IPV6
static void INET6_displayroutes(void)
{
char addr6[128], *naddr6;
/* In addr6x, we store both 40-byte ':'-delimited ipv6 addresses.
* We read the non-delimited strings into the tail of the buffer
* using fscanf and then modify the buffer by shifting forward
* while inserting ':'s and the nul terminator for the first string.
* Hence the strings are at addr6x and addr6x+40. This generates
* _much_ less code than the previous (upstream) approach. */
char addr6x[80];
char iface[16], flags[16];
int iflags, metric, refcnt, use, prefix_len, slen;
struct sockaddr_in6 snaddr6;
FILE *fp = xfopen_for_read("/proc/net/ipv6_route");
printf("Kernel IPv6 routing table\n%-44s%-40s"
"Flags Metric Ref Use Iface\n",
"Destination", "Next Hop");
while (1) {
int r;
r = fscanf(fp, "%32s%x%*s%x%32s%x%x%x%x%s\n",
addr6x+14, &prefix_len, &slen, addr6x+40+7,
&metric, &refcnt, &use, &iflags, iface);
if (r != 9) {
if ((r < 0) && feof(fp)) { /* EOF with no (nonspace) chars read. */
break;
}
ERROR:
bb_simple_perror_msg_and_die(bb_msg_read_error);
}
/* Do the addr6x shift-and-insert changes to ':'-delimit addresses.
* For now, always do this to validate the proc route format, even
* if the interface is down. */
{
int i = 0;
char *p = addr6x+14;
do {
if (!*p) {
if (i == 40) { /* nul terminator for 1st address? */
addr6x[39] = 0; /* Fixup... need 0 instead of ':'. */
++p; /* Skip and continue. */
continue;
}
goto ERROR;
}
addr6x[i++] = *p++;
if (!((i+1) % 5)) {
addr6x[i++] = ':';
}
} while (i < 40+28+7);
}
set_flags(flags, (iflags & IPV6_MASK));
r = 0;
while (1) {
inet_pton(AF_INET6, addr6x + r,
(struct sockaddr *) &snaddr6.sin6_addr);
snaddr6.sin6_family = AF_INET6;
naddr6 = INET6_rresolve((struct sockaddr_in6 *) &snaddr6,
0x0fff /* Apparently, upstream never resolves. */
);
if (!r) { /* 1st pass */
snprintf(addr6, sizeof(addr6), "%s/%d", naddr6, prefix_len);
r += 40;
free(naddr6);
} else { /* 2nd pass */
/* Print the info. */
printf("%-43s %-39s %-5s %-6d %-2d %7d %-8s\n",
addr6, naddr6, flags, metric, refcnt, use, iface);
free(naddr6);
break;
}
}
}
fclose(fp);
}
#endif
#define ROUTE_OPT_A 0x01
#define ROUTE_OPT_n 0x02
#define ROUTE_OPT_e 0x04
#define ROUTE_OPT_INET6 0x08 /* Not an actual option. See below. */
/* 1st byte is offset to next entry offset. 2nd byte is return value. */
/* 2nd byte matches RTACTION_* code */
static const char tbl_verb[] ALIGN1 =
"\006\001add\0"
"\006\002del\0"
/* "\011\002delete\0" */
"\010\002delete" /* Since it's last, we can save a byte. */
;
int route_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int route_main(int argc UNUSED_PARAM, char **argv)
{
unsigned opt;
int what;
char *family;
char **p;
/* First, remap '-net' and '-host' to avoid getopt problems. */
p = argv;
while (*++p) {
if (strcmp(*p, "-net") == 0 || strcmp(*p, "-host") == 0) {
p[0][0] = '#';
}
}
opt = getopt32(argv, "A:ne", &family);
if ((opt & ROUTE_OPT_A) && strcmp(family, "inet") != 0) {
#if ENABLE_FEATURE_IPV6
if (strcmp(family, "inet6") == 0) {
opt |= ROUTE_OPT_INET6; /* Set flag for ipv6. */
} else
#endif
bb_show_usage();
}
argv += optind;
/* No more args means display the routing table. */
if (!*argv) {
int noresolve = (opt & ROUTE_OPT_n) ? 0x0fff : 0;
#if ENABLE_FEATURE_IPV6
if (opt & ROUTE_OPT_INET6)
INET6_displayroutes();
else
#endif
bb_displayroutes(noresolve, opt & ROUTE_OPT_e);
fflush_stdout_and_exit(EXIT_SUCCESS);
}
/* Check verb. At the moment, must be add, del, or delete. */
what = kw_lookup(tbl_verb, &argv);
if (!what || !*argv) { /* Unknown verb or no more args. */
bb_show_usage();
}
#if ENABLE_FEATURE_IPV6
if (opt & ROUTE_OPT_INET6)
INET6_setroute(what, argv);
else
#endif
INET_setroute(what, argv);
return EXIT_SUCCESS;
}