busybox/archival/bbunzip.c
Aaro Koskinen cddc98eab7 gzip: add support for --no-name long option
Add support for --no-name long option. Just silently ignore it
like the short -n option.

This allows to use busybox gzip with Lynx browser.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-27 21:30:43 +01:00

560 lines
17 KiB
C

/* vi: set sw=4 ts=4: */
/*
* Common code for gunzip-like applets
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/
#include "libbb.h"
#include "bb_archive.h"
/* lzop_main() uses bbunpack(), need this: */
//kbuild:lib-$(CONFIG_LZOP) += bbunzip.o
/* Note: must be kept in sync with archival/lzop.c */
enum {
OPT_STDOUT = 1 << 0,
OPT_FORCE = 1 << 1,
/* only some decompressors: */
OPT_VERBOSE = 1 << 2,
OPT_QUIET = 1 << 3,
OPT_DECOMPRESS = 1 << 4,
OPT_TEST = 1 << 5,
SEAMLESS_MAGIC = (1 << 31) * SEAMLESS_COMPRESSION,
};
static
int open_to_or_warn(int to_fd, const char *filename, int flags, int mode)
{
int fd = open3_or_warn(filename, flags, mode);
if (fd < 0) {
return 1;
}
xmove_fd(fd, to_fd);
return 0;
}
char* FAST_FUNC append_ext(char *filename, const char *expected_ext)
{
return xasprintf("%s.%s", filename, expected_ext);
}
int FAST_FUNC bbunpack(char **argv,
IF_DESKTOP(long long) int FAST_FUNC (*unpacker)(transformer_state_t *xstate),
char* FAST_FUNC (*make_new_name)(char *filename, const char *expected_ext),
const char *expected_ext
)
{
struct stat stat_buf;
IF_DESKTOP(long long) int status = 0;
char *filename, *new_name;
smallint exitcode = 0;
transformer_state_t xstate;
do {
/* NB: new_name is *maybe* malloc'ed! */
new_name = NULL;
filename = *argv; /* can be NULL - 'streaming' bunzip2 */
if (filename && LONE_DASH(filename))
filename = NULL;
/* Open src */
if (filename) {
if (!(option_mask32 & SEAMLESS_MAGIC)) {
if (stat(filename, &stat_buf) != 0) {
err_name:
bb_simple_perror_msg(filename);
err:
exitcode = 1;
goto free_name;
}
if (open_to_or_warn(STDIN_FILENO, filename, O_RDONLY, 0))
goto err;
} else {
/* "clever zcat" with FILE */
/* fail_if_not_compressed because zcat refuses uncompressed input */
int fd = open_zipped(filename, /*fail_if_not_compressed:*/ 1);
if (fd < 0)
goto err_name;
xmove_fd(fd, STDIN_FILENO);
}
} else
if (option_mask32 & SEAMLESS_MAGIC) {
/* "clever zcat" on stdin */
if (setup_unzip_on_fd(STDIN_FILENO, /*fail_if_not_compressed*/ 1))
goto err;
}
/* Special cases: test, stdout */
if (option_mask32 & (OPT_STDOUT|OPT_TEST)) {
if (option_mask32 & OPT_TEST)
if (open_to_or_warn(STDOUT_FILENO, bb_dev_null, O_WRONLY, 0))
xfunc_die();
filename = NULL;
}
/* Open dst if we are going to unpack to file */
if (filename) {
new_name = make_new_name(filename, expected_ext);
if (!new_name) {
bb_error_msg("%s: unknown suffix - ignored", filename);
goto err;
}
/* -f: overwrite existing output files */
if (option_mask32 & OPT_FORCE) {
unlink(new_name);
}
/* O_EXCL: "real" bunzip2 doesn't overwrite files */
/* GNU gunzip does not bail out, but goes to next file */
if (open_to_or_warn(STDOUT_FILENO, new_name, O_WRONLY | O_CREAT | O_EXCL,
stat_buf.st_mode))
goto err;
}
/* Check that the input is sane */
if (!(option_mask32 & OPT_FORCE) && isatty(STDIN_FILENO)) {
bb_error_msg_and_die("compressed data not read from terminal, "
"use -f to force it");
}
if (!(option_mask32 & SEAMLESS_MAGIC)) {
init_transformer_state(&xstate);
xstate.check_signature = 1;
/*xstate.src_fd = STDIN_FILENO; - already is */
xstate.dst_fd = STDOUT_FILENO;
status = unpacker(&xstate);
if (status < 0)
exitcode = 1;
} else {
if (bb_copyfd_eof(STDIN_FILENO, STDOUT_FILENO) < 0)
/* Disk full, tty closed, etc. No point in continuing */
xfunc_die();
}
if (!(option_mask32 & OPT_STDOUT))
xclose(STDOUT_FILENO); /* with error check! */
if (filename) {
char *del = new_name;
if (status >= 0) {
unsigned new_name_len;
/* TODO: restore other things? */
if (xstate.mtime != 0) {
struct timeval times[2];
times[1].tv_sec = times[0].tv_sec = xstate.mtime;
times[1].tv_usec = times[0].tv_usec = 0;
/* Note: we closed it first.
* On some systems calling utimes
* then closing resets the mtime
* back to current time. */
utimes(new_name, times); /* ignoring errors */
}
if (ENABLE_DESKTOP)
new_name_len = strlen(new_name);
/* Restore source filename (unless tgz -> tar case) */
if (new_name == filename) {
new_name_len = strlen(filename);
filename[new_name_len] = '.';
}
/* Extreme bloat for gunzip compat */
/* Some users do want this info... */
if (ENABLE_DESKTOP && (option_mask32 & OPT_VERBOSE)) {
unsigned percent = status
? ((uoff_t)stat_buf.st_size * 100u / (unsigned long long)status)
: 0;
fprintf(stderr, "%s: %u%% - replaced with %.*s\n",
filename,
100u - percent,
new_name_len, new_name
);
}
/* Delete _source_ file */
del = filename;
}
xunlink(del);
free_name:
if (new_name != filename)
free(new_name);
}
} while (*argv && *++argv);
if (option_mask32 & OPT_STDOUT)
xclose(STDOUT_FILENO); /* with error check! */
return exitcode;
}
#if ENABLE_UNCOMPRESS || ENABLE_BUNZIP2 || ENABLE_UNLZMA || ENABLE_UNXZ
static
char* FAST_FUNC make_new_name_generic(char *filename, const char *expected_ext)
{
char *extension = strrchr(filename, '.');
if (!extension || strcmp(extension + 1, expected_ext) != 0) {
/* Mimic GNU gunzip - "real" bunzip2 tries to */
/* unpack file anyway, to file.out */
return NULL;
}
*extension = '\0';
return filename;
}
#endif
/*
* Uncompress applet for busybox (c) 2002 Glenn McGrath
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/
//usage:#define uncompress_trivial_usage
//usage: "[-cf] [FILE]..."
//usage:#define uncompress_full_usage "\n\n"
//usage: "Decompress .Z file[s]\n"
//usage: "\n -c Write to stdout"
//usage: "\n -f Overwrite"
//config:config UNCOMPRESS
//config: bool "uncompress"
//config: default n # ancient
//config: help
//config: uncompress is used to decompress archives created by compress.
//config: Not much used anymore, replaced by gzip/gunzip.
//applet:IF_UNCOMPRESS(APPLET(uncompress, BB_DIR_BIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_UNCOMPRESS) += bbunzip.o
#if ENABLE_UNCOMPRESS
int uncompress_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int uncompress_main(int argc UNUSED_PARAM, char **argv)
{
getopt32(argv, "cf");
argv += optind;
return bbunpack(argv, unpack_Z_stream, make_new_name_generic, "Z");
}
#endif
/*
* Gzip implementation for busybox
*
* Based on GNU gzip v1.2.4 Copyright (C) 1992-1993 Jean-loup Gailly.
*
* Originally adjusted for busybox by Sven Rudolph <sr1@inf.tu-dresden.de>
* based on gzip sources
*
* Adjusted further by Erik Andersen <andersen@codepoet.org> to support files as
* well as stdin/stdout, and to generally behave itself wrt command line
* handling.
*
* General cleanup to better adhere to the style guide and make use of standard
* busybox functions by Glenn McGrath
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*
* gzip (GNU zip) -- compress files with zip algorithm and 'compress' interface
* Copyright (C) 1992-1993 Jean-loup Gailly
* The unzip code was written and put in the public domain by Mark Adler.
* Portions of the lzw code are derived from the public domain 'compress'
* written by Spencer Thomas, Joe Orost, James Woods, Jim McKie, Steve Davies,
* Ken Turkowski, Dave Mack and Peter Jannesen.
*/
//usage:#define gunzip_trivial_usage
//usage: "[-cft] [FILE]..."
//usage:#define gunzip_full_usage "\n\n"
//usage: "Decompress FILEs (or stdin)\n"
//usage: "\n -c Write to stdout"
//usage: "\n -f Force"
//usage: "\n -t Test file integrity"
//usage:
//usage:#define gunzip_example_usage
//usage: "$ ls -la /tmp/BusyBox*\n"
//usage: "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n"
//usage: "$ gunzip /tmp/BusyBox-0.43.tar.gz\n"
//usage: "$ ls -la /tmp/BusyBox*\n"
//usage: "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
//usage:
//usage:#define zcat_trivial_usage
//usage: "[FILE]..."
//usage:#define zcat_full_usage "\n\n"
//usage: "Decompress to stdout"
//config:config GUNZIP
//config: bool "gunzip"
//config: default y
//config: help
//config: gunzip is used to decompress archives created by gzip.
//config: You can use the `-t' option to test the integrity of
//config: an archive, without decompressing it.
//config:
//config:config FEATURE_GUNZIP_LONG_OPTIONS
//config: bool "Enable long options"
//config: default y
//config: depends on GUNZIP && LONG_OPTS
//config: help
//config: Enable use of long options.
//applet:IF_GUNZIP(APPLET(gunzip, BB_DIR_BIN, BB_SUID_DROP))
//applet:IF_GUNZIP(APPLET_ODDNAME(zcat, gunzip, BB_DIR_BIN, BB_SUID_DROP, zcat))
//kbuild:lib-$(CONFIG_GZIP) += bbunzip.o
//kbuild:lib-$(CONFIG_GUNZIP) += bbunzip.o
#if ENABLE_GUNZIP
static
char* FAST_FUNC make_new_name_gunzip(char *filename, const char *expected_ext UNUSED_PARAM)
{
char *extension = strrchr(filename, '.');
if (!extension)
return NULL;
extension++;
if (strcmp(extension, "tgz" + 1) == 0
#if ENABLE_FEATURE_SEAMLESS_Z
|| (extension[0] == 'Z' && extension[1] == '\0')
#endif
) {
extension[-1] = '\0';
} else if (strcmp(extension, "tgz") == 0) {
filename = xstrdup(filename);
extension = strrchr(filename, '.');
extension[2] = 'a';
extension[3] = 'r';
} else {
return NULL;
}
return filename;
}
#if ENABLE_FEATURE_GUNZIP_LONG_OPTIONS
static const char gunzip_longopts[] ALIGN1 =
"stdout\0" No_argument "c"
"to-stdout\0" No_argument "c"
"force\0" No_argument "f"
"test\0" No_argument "t"
"no-name\0" No_argument "n"
;
#endif
/*
* Linux kernel build uses gzip -d -n. We accept and ignore it.
* Man page says:
* -n --no-name
* gzip: do not save the original file name and time stamp.
* (The original name is always saved if the name had to be truncated.)
* gunzip: do not restore the original file name/time even if present
* (remove only the gzip suffix from the compressed file name).
* This option is the default when decompressing.
* -N --name
* gzip: always save the original file name and time stamp (this is the default)
* gunzip: restore the original file name and time stamp if present.
*/
int gunzip_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int gunzip_main(int argc UNUSED_PARAM, char **argv)
{
#if ENABLE_FEATURE_GUNZIP_LONG_OPTIONS
applet_long_options = gunzip_longopts;
#endif
getopt32(argv, "cfvqdtn");
argv += optind;
/* If called as zcat...
* Normally, "zcat" is just "gunzip -c".
* But if seamless magic is enabled, then we are much more clever.
*/
if (applet_name[1] == 'c')
option_mask32 |= OPT_STDOUT | SEAMLESS_MAGIC;
return bbunpack(argv, unpack_gz_stream, make_new_name_gunzip, /*unused:*/ NULL);
}
#endif
/*
* Modified for busybox by Glenn McGrath
* Added support output to stdout by Thomas Lundquist <thomasez@zelow.no>
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/
//usage:#define bunzip2_trivial_usage
//usage: "[-cf] [FILE]..."
//usage:#define bunzip2_full_usage "\n\n"
//usage: "Decompress FILEs (or stdin)\n"
//usage: "\n -c Write to stdout"
//usage: "\n -f Force"
//usage:#define bzcat_trivial_usage
//usage: "[FILE]..."
//usage:#define bzcat_full_usage "\n\n"
//usage: "Decompress to stdout"
//config:config BUNZIP2
//config: bool "bunzip2"
//config: default y
//config: help
//config: bunzip2 is a compression utility using the Burrows-Wheeler block
//config: sorting text compression algorithm, and Huffman coding. Compression
//config: is generally considerably better than that achieved by more
//config: conventional LZ77/LZ78-based compressors, and approaches the
//config: performance of the PPM family of statistical compressors.
//config:
//config: Unless you have a specific application which requires bunzip2, you
//config: should probably say N here.
//applet:IF_BUNZIP2(APPLET(bunzip2, BB_DIR_USR_BIN, BB_SUID_DROP))
//applet:IF_BUNZIP2(APPLET_ODDNAME(bzcat, bunzip2, BB_DIR_USR_BIN, BB_SUID_DROP, bzcat))
//kbuild:lib-$(CONFIG_BZIP2) += bbunzip.o
//kbuild:lib-$(CONFIG_BUNZIP2) += bbunzip.o
#if ENABLE_BUNZIP2
int bunzip2_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int bunzip2_main(int argc UNUSED_PARAM, char **argv)
{
getopt32(argv, "cfvqdt");
argv += optind;
if (applet_name[2] == 'c') /* bzcat */
option_mask32 |= OPT_STDOUT;
return bbunpack(argv, unpack_bz2_stream, make_new_name_generic, "bz2");
}
#endif
/*
* Small lzma deflate implementation.
* Copyright (C) 2006 Aurelien Jacobs <aurel@gnuage.org>
*
* Based on bunzip.c from busybox
*
* Licensed under GPLv2, see file LICENSE in this source tree.
*/
//usage:#define unlzma_trivial_usage
//usage: "[-cf] [FILE]..."
//usage:#define unlzma_full_usage "\n\n"
//usage: "Decompress FILE (or stdin)\n"
//usage: "\n -c Write to stdout"
//usage: "\n -f Force"
//usage:
//usage:#define lzma_trivial_usage
//usage: "-d [-cf] [FILE]..."
//usage:#define lzma_full_usage "\n\n"
//usage: "Decompress FILE (or stdin)\n"
//usage: "\n -d Decompress"
//usage: "\n -c Write to stdout"
//usage: "\n -f Force"
//usage:
//usage:#define lzcat_trivial_usage
//usage: "[FILE]..."
//usage:#define lzcat_full_usage "\n\n"
//usage: "Decompress to stdout"
//usage:
//usage:#define unxz_trivial_usage
//usage: "[-cf] [FILE]..."
//usage:#define unxz_full_usage "\n\n"
//usage: "Decompress FILE (or stdin)\n"
//usage: "\n -c Write to stdout"
//usage: "\n -f Force"
//usage:
//usage:#define xz_trivial_usage
//usage: "-d [-cf] [FILE]..."
//usage:#define xz_full_usage "\n\n"
//usage: "Decompress FILE (or stdin)\n"
//usage: "\n -d Decompress"
//usage: "\n -c Write to stdout"
//usage: "\n -f Force"
//usage:
//usage:#define xzcat_trivial_usage
//usage: "[FILE]..."
//usage:#define xzcat_full_usage "\n\n"
//usage: "Decompress to stdout"
//config:config UNLZMA
//config: bool "unlzma"
//config: default y
//config: help
//config: unlzma is a compression utility using the Lempel-Ziv-Markov chain
//config: compression algorithm, and range coding. Compression
//config: is generally considerably better than that achieved by the bzip2
//config: compressors.
//config:
//config: The BusyBox unlzma applet is limited to decompression only.
//config: On an x86 system, this applet adds about 4K.
//config:
//config:config FEATURE_LZMA_FAST
//config: bool "Optimize unlzma for speed"
//config: default n
//config: depends on UNLZMA
//config: help
//config: This option reduces decompression time by about 25% at the cost of
//config: a 1K bigger binary.
//config:
//config:config LZMA
//config: bool "Provide lzma alias which supports only unpacking"
//config: default y
//config: depends on UNLZMA
//config: help
//config: Enable this option if you want commands like "lzma -d" to work.
//config: IOW: you'll get lzma applet, but it will always require -d option.
//applet:IF_UNLZMA(APPLET(unlzma, BB_DIR_USR_BIN, BB_SUID_DROP))
//applet:IF_UNLZMA(APPLET_ODDNAME(lzcat, unlzma, BB_DIR_USR_BIN, BB_SUID_DROP, lzcat))
//applet:IF_LZMA(APPLET_ODDNAME(lzma, unlzma, BB_DIR_USR_BIN, BB_SUID_DROP, lzma))
//kbuild:lib-$(CONFIG_UNLZMA) += bbunzip.o
#if ENABLE_UNLZMA
int unlzma_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int unlzma_main(int argc UNUSED_PARAM, char **argv)
{
IF_LZMA(int opts =) getopt32(argv, "cfvqdt");
# if ENABLE_LZMA
/* lzma without -d or -t? */
if (applet_name[2] == 'm' && !(opts & (OPT_DECOMPRESS|OPT_TEST)))
bb_show_usage();
# endif
/* lzcat? */
if (applet_name[2] == 'c')
option_mask32 |= OPT_STDOUT;
argv += optind;
return bbunpack(argv, unpack_lzma_stream, make_new_name_generic, "lzma");
}
#endif
//config:config UNXZ
//config: bool "unxz"
//config: default y
//config: help
//config: unxz is a unlzma successor.
//config:
//config:config XZ
//config: bool "Provide xz alias which supports only unpacking"
//config: default y
//config: depends on UNXZ
//config: help
//config: Enable this option if you want commands like "xz -d" to work.
//config: IOW: you'll get xz applet, but it will always require -d option.
//applet:IF_UNXZ(APPLET(unxz, BB_DIR_USR_BIN, BB_SUID_DROP))
//applet:IF_UNXZ(APPLET_ODDNAME(xzcat, unxz, BB_DIR_USR_BIN, BB_SUID_DROP, xzcat))
//applet:IF_XZ(APPLET_ODDNAME(xz, unxz, BB_DIR_USR_BIN, BB_SUID_DROP, xz))
//kbuild:lib-$(CONFIG_UNXZ) += bbunzip.o
#if ENABLE_UNXZ
int unxz_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int unxz_main(int argc UNUSED_PARAM, char **argv)
{
IF_XZ(int opts =) getopt32(argv, "cfvqdt");
# if ENABLE_XZ
/* xz without -d or -t? */
if (applet_name[2] == '\0' && !(opts & (OPT_DECOMPRESS|OPT_TEST)))
bb_show_usage();
# endif
/* xzcat? */
if (applet_name[2] == 'c')
option_mask32 |= OPT_STDOUT;
argv += optind;
return bbunpack(argv, unpack_xz_stream, make_new_name_generic, "xz");
}
#endif