busybox/networking/udhcp/dhcpd.h
2003-06-10 17:22:49 +00:00

131 lines
3.8 KiB
C

/* dhcpd.h */
#ifndef _DHCPD_H
#define _DHCPD_H
#include <netinet/ip.h>
#include <netinet/udp.h>
#include "leases.h"
/************************************/
/* Defaults _you_ may want to tweak */
/************************************/
/* the period of time the client is allowed to use that address */
#define LEASE_TIME (60*60*24*10) /* 10 days of seconds */
/* where to find the DHCP server configuration file */
#define DHCPD_CONF_FILE "/etc/udhcpd.conf"
/*****************************************************************/
/* Do not modify below here unless you know what you are doing!! */
/*****************************************************************/
/* DHCP protocol -- see RFC 2131 */
#define SERVER_PORT 67
#define CLIENT_PORT 68
#define DHCP_MAGIC 0x63825363
/* DHCP option codes (partial list) */
#define DHCP_PADDING 0x00
#define DHCP_SUBNET 0x01
#define DHCP_TIME_OFFSET 0x02
#define DHCP_ROUTER 0x03
#define DHCP_TIME_SERVER 0x04
#define DHCP_NAME_SERVER 0x05
#define DHCP_DNS_SERVER 0x06
#define DHCP_LOG_SERVER 0x07
#define DHCP_COOKIE_SERVER 0x08
#define DHCP_LPR_SERVER 0x09
#define DHCP_HOST_NAME 0x0c
#define DHCP_BOOT_SIZE 0x0d
#define DHCP_DOMAIN_NAME 0x0f
#define DHCP_SWAP_SERVER 0x10
#define DHCP_ROOT_PATH 0x11
#define DHCP_IP_TTL 0x17
#define DHCP_MTU 0x1a
#define DHCP_BROADCAST 0x1c
#define DHCP_NTP_SERVER 0x2a
#define DHCP_WINS_SERVER 0x2c
#define DHCP_REQUESTED_IP 0x32
#define DHCP_LEASE_TIME 0x33
#define DHCP_OPTION_OVER 0x34
#define DHCP_MESSAGE_TYPE 0x35
#define DHCP_SERVER_ID 0x36
#define DHCP_PARAM_REQ 0x37
#define DHCP_MESSAGE 0x38
#define DHCP_MAX_SIZE 0x39
#define DHCP_T1 0x3a
#define DHCP_T2 0x3b
#define DHCP_VENDOR 0x3c
#define DHCP_CLIENT_ID 0x3d
#define DHCP_END 0xFF
#define BOOTREQUEST 1
#define BOOTREPLY 2
#define ETH_10MB 1
#define ETH_10MB_LEN 6
#define DHCPDISCOVER 1
#define DHCPOFFER 2
#define DHCPREQUEST 3
#define DHCPDECLINE 4
#define DHCPACK 5
#define DHCPNAK 6
#define DHCPRELEASE 7
#define DHCPINFORM 8
#define BROADCAST_FLAG 0x8000
#define OPTION_FIELD 0
#define FILE_FIELD 1
#define SNAME_FIELD 2
/* miscellaneous defines */
#define MAC_BCAST_ADDR (unsigned char *) "\xff\xff\xff\xff\xff\xff"
#define OPT_CODE 0
#define OPT_LEN 1
#define OPT_DATA 2
struct option_set {
unsigned char *data;
struct option_set *next;
};
struct server_config_t {
u_int32_t server; /* Our IP, in network order */
u_int32_t start; /* Start address of leases, network order */
u_int32_t end; /* End of leases, network order */
struct option_set *options; /* List of DHCP options loaded from the config file */
char *interface; /* The name of the interface to use */
int ifindex; /* Index number of the interface to use */
unsigned char arp[6]; /* Our arp address */
unsigned long lease; /* lease time in seconds (host order) */
unsigned long max_leases; /* maximum number of leases (including reserved address) */
char remaining; /* should the lease file be interpreted as lease time remaining, or
* as the time the lease expires */
unsigned long auto_time; /* how long should udhcpd wait before writing a config file.
* if this is zero, it will only write one on SIGUSR1 */
unsigned long decline_time; /* how long an address is reserved if a client returns a
* decline message */
unsigned long conflict_time; /* how long an arp conflict offender is leased for */
unsigned long offer_time; /* how long an offered address is reserved */
unsigned long min_lease; /* minimum lease a client can request*/
char *lease_file;
char *pidfile;
char *notify_file; /* What to run whenever leases are written */
u_int32_t siaddr; /* next server bootp option */
char *sname; /* bootp server name */
char *boot_file; /* bootp boot file option */
};
extern struct server_config_t server_config;
extern struct dhcpOfferedAddr *leases;
#endif