busybox/coreutils/test.c
James Byrne 6937487be7 libbb: reduce the overhead of single parameter bb_error_msg() calls
Back in 2007, commit 0c97c9d437 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().

This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.

Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.

This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.

The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):

Arm:     -92 bytes
MIPS:    -52 bytes
PPC:   -1836 bytes
x86_64: -938 bytes

Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 11:35:03 +02:00

948 lines
22 KiB
C

/* vi: set sw=4 ts=4: */
/*
* test implementation for busybox
*
* Copyright (c) by a whole pile of folks:
*
* test(1); version 7-like -- author Erik Baalbergen
* modified by Eric Gisin to be used as built-in.
* modified by Arnold Robbins to add SVR3 compatibility
* (-x -c -b -p -u -g -k) plus Korn's -L -nt -ot -ef and new -S (socket).
* modified by J.T. Conklin for NetBSD.
* modified by Herbert Xu to be used as built-in in ash.
* modified by Erik Andersen <andersen@codepoet.org> to be used
* in busybox.
* modified by Bernhard Reutner-Fischer to be useable (i.e. a bit less bloaty).
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*
* Original copyright notice states:
* "This program is in the Public Domain."
*/
//config:config TEST
//config: bool "test (4.1 kb)"
//config: default y
//config: help
//config: test is used to check file types and compare values,
//config: returning an appropriate exit code. The bash shell
//config: has test built in, ash can build it in optionally.
//config:
//config:config TEST1
//config: bool "test as ["
//config: default y
//config: help
//config: Provide test command in the "[ EXPR ]" form
//config:
//config:config TEST2
//config: bool "test as [["
//config: default y
//config: help
//config: Provide test command in the "[[ EXPR ]]" form
//config:
//config:config FEATURE_TEST_64
//config: bool "Extend test to 64 bit"
//config: default y
//config: depends on TEST || TEST1 || TEST2 || ASH_TEST || HUSH_TEST
//config: help
//config: Enable 64-bit support in test.
//applet:IF_TEST(APPLET_NOFORK(test, test, BB_DIR_USR_BIN, BB_SUID_DROP, test))
//applet:IF_TEST1(APPLET_NOFORK([, test, BB_DIR_USR_BIN, BB_SUID_DROP, test))
//applet:IF_TEST2(APPLET_NOFORK([[, test, BB_DIR_USR_BIN, BB_SUID_DROP, test))
//kbuild:lib-$(CONFIG_TEST) += test.o test_ptr_hack.o
//kbuild:lib-$(CONFIG_TEST1) += test.o test_ptr_hack.o
//kbuild:lib-$(CONFIG_TEST2) += test.o test_ptr_hack.o
//kbuild:lib-$(CONFIG_ASH_TEST) += test.o test_ptr_hack.o
//kbuild:lib-$(CONFIG_HUSH_TEST) += test.o test_ptr_hack.o
/* "test --help" is special-cased to ignore --help */
//usage:#define test_trivial_usage NOUSAGE_STR
//usage:#define test_full_usage ""
//usage:
//usage:#define test_example_usage
//usage: "$ test 1 -eq 2\n"
//usage: "$ echo $?\n"
//usage: "1\n"
//usage: "$ test 1 -eq 1\n"
//usage: "$ echo $?\n"
//usage: "0\n"
//usage: "$ [ -d /etc ]\n"
//usage: "$ echo $?\n"
//usage: "0\n"
//usage: "$ [ -d /junk ]\n"
//usage: "$ echo $?\n"
//usage: "1\n"
#include "libbb.h"
/* This is a NOFORK applet. Be very careful! */
/* test_main() is called from shells, and we need to be extra careful here.
* This is true regardless of PREFER_APPLETS and SH_STANDALONE
* state. */
/* test(1) accepts the following grammar:
oexpr ::= aexpr | aexpr "-o" oexpr ;
aexpr ::= nexpr | nexpr "-a" aexpr ;
nexpr ::= primary | "!" primary
primary ::= unary-operator operand
| operand binary-operator operand
| operand
| "(" oexpr ")"
;
unary-operator ::= "-r"|"-w"|"-x"|"-f"|"-d"|"-c"|"-b"|"-p"|
"-u"|"-g"|"-k"|"-s"|"-t"|"-z"|"-n"|"-o"|"-O"|"-G"|"-L"|"-S";
binary-operator ::= "="|"=="|"!="|"-eq"|"-ne"|"-ge"|"-gt"|"-le"|"-lt"|
"-nt"|"-ot"|"-ef";
operand ::= <any legal UNIX file name>
*/
/* TODO: handle [[ expr ]] bashism bash-compatibly.
* [[ ]] is meant to be a "better [ ]", with less weird syntax
* and without the risk of variables and quoted strings misinterpreted
* as operators.
* This will require support from shells - we need to know quote status
* of each parameter (see below).
*
* Word splitting and pathname expansion should NOT be performed:
* # a="a b"; [[ $a = "a b" ]] && echo YES
* YES
* # [[ /bin/m* ]] && echo YES
* YES
*
* =~ should do regexp match
* = and == should do pattern match against right side:
* # [[ *a* == bab ]] && echo YES
* # [[ bab == *a* ]] && echo YES
* YES
* != does the negated == (i.e., also with pattern matching).
* Pattern matching is quotation-sensitive:
* # [[ bab == "b"a* ]] && echo YES
* YES
* # [[ bab == b"a*" ]] && echo YES
*
* Conditional operators such as -f must be unquoted literals to be recognized:
* # [[ -e /bin ]] && echo YES
* YES
* # [[ '-e' /bin ]] && echo YES
* bash: conditional binary operator expected...
* # A='-e'; [[ $A /bin ]] && echo YES
* bash: conditional binary operator expected...
*
* || and && should work as -o and -a work in [ ]
* -a and -o aren't recognized (&& and || are to be used instead)
* ( and ) do not need to be quoted unlike in [ ]:
* # [[ ( abc ) && '' ]] && echo YES
* # [[ ( abc ) || '' ]] && echo YES
* YES
* # [[ ( abc ) -o '' ]] && echo YES
* bash: syntax error in conditional expression...
*
* Apart from the above, [[ expr ]] should work as [ expr ]
*/
#define TEST_DEBUG 0
enum token {
EOI,
FILRD, /* file access */
FILWR,
FILEX,
FILEXIST,
FILREG, /* file type */
FILDIR,
FILCDEV,
FILBDEV,
FILFIFO,
FILSOCK,
FILSYM,
FILGZ,
FILTT,
FILSUID, /* file bit */
FILSGID,
FILSTCK,
FILNT, /* file ops */
FILOT,
FILEQ,
FILUID,
FILGID,
STREZ, /* str ops */
STRNZ,
STREQ,
STRNE,
STRLT,
STRGT,
INTEQ, /* int ops */
INTNE,
INTGE,
INTGT,
INTLE,
INTLT,
UNOT,
BAND,
BOR,
LPAREN,
RPAREN,
OPERAND
};
#define is_int_op(a) (((unsigned char)((a) - INTEQ)) <= 5)
#define is_str_op(a) (((unsigned char)((a) - STREZ)) <= 5)
#define is_file_op(a) (((unsigned char)((a) - FILNT)) <= 2)
#define is_file_access(a) (((unsigned char)((a) - FILRD)) <= 2)
#define is_file_type(a) (((unsigned char)((a) - FILREG)) <= 5)
#define is_file_bit(a) (((unsigned char)((a) - FILSUID)) <= 2)
#if TEST_DEBUG
int depth;
#define nest_msg(...) do { \
depth++; \
fprintf(stderr, "%*s", depth*2, ""); \
fprintf(stderr, __VA_ARGS__); \
} while (0)
#define unnest_msg(...) do { \
fprintf(stderr, "%*s", depth*2, ""); \
fprintf(stderr, __VA_ARGS__); \
depth--; \
} while (0)
#define dbg_msg(...) do { \
fprintf(stderr, "%*s", depth*2, ""); \
fprintf(stderr, __VA_ARGS__); \
} while (0)
#define unnest_msg_and_return(expr, ...) do { \
number_t __res = (expr); \
fprintf(stderr, "%*s", depth*2, ""); \
fprintf(stderr, __VA_ARGS__, res); \
depth--; \
return __res; \
} while (0)
static const char *const TOKSTR[] = {
"EOI",
"FILRD",
"FILWR",
"FILEX",
"FILEXIST",
"FILREG",
"FILDIR",
"FILCDEV",
"FILBDEV",
"FILFIFO",
"FILSOCK",
"FILSYM",
"FILGZ",
"FILTT",
"FILSUID",
"FILSGID",
"FILSTCK",
"FILNT",
"FILOT",
"FILEQ",
"FILUID",
"FILGID",
"STREZ",
"STRNZ",
"STREQ",
"STRNE",
"STRLT",
"STRGT",
"INTEQ",
"INTNE",
"INTGE",
"INTGT",
"INTLE",
"INTLT",
"UNOT",
"BAND",
"BOR",
"LPAREN",
"RPAREN",
"OPERAND"
};
#else
#define nest_msg(...) ((void)0)
#define unnest_msg(...) ((void)0)
#define dbg_msg(...) ((void)0)
#define unnest_msg_and_return(expr, ...) return expr
#endif
enum {
UNOP,
BINOP,
BUNOP,
BBINOP,
PAREN
};
struct operator_t {
unsigned char op_num, op_type;
};
static const struct operator_t ops_table[] = {
{ /* "-r" */ FILRD , UNOP },
{ /* "-w" */ FILWR , UNOP },
{ /* "-x" */ FILEX , UNOP },
{ /* "-e" */ FILEXIST, UNOP },
{ /* "-f" */ FILREG , UNOP },
{ /* "-d" */ FILDIR , UNOP },
{ /* "-c" */ FILCDEV , UNOP },
{ /* "-b" */ FILBDEV , UNOP },
{ /* "-p" */ FILFIFO , UNOP },
{ /* "-u" */ FILSUID , UNOP },
{ /* "-g" */ FILSGID , UNOP },
{ /* "-k" */ FILSTCK , UNOP },
{ /* "-s" */ FILGZ , UNOP },
{ /* "-t" */ FILTT , UNOP },
{ /* "-z" */ STREZ , UNOP },
{ /* "-n" */ STRNZ , UNOP },
{ /* "-h" */ FILSYM , UNOP }, /* for backwards compat */
{ /* "-O" */ FILUID , UNOP },
{ /* "-G" */ FILGID , UNOP },
{ /* "-L" */ FILSYM , UNOP },
{ /* "-S" */ FILSOCK , UNOP },
{ /* "=" */ STREQ , BINOP },
/* "==" is bashism, http://pubs.opengroup.org/onlinepubs/9699919799/utilities/test.html
* lists only "=" as comparison operator.
*/
{ /* "==" */ STREQ , BINOP },
{ /* "!=" */ STRNE , BINOP },
{ /* "<" */ STRLT , BINOP },
{ /* ">" */ STRGT , BINOP },
{ /* "-eq"*/ INTEQ , BINOP },
{ /* "-ne"*/ INTNE , BINOP },
{ /* "-ge"*/ INTGE , BINOP },
{ /* "-gt"*/ INTGT , BINOP },
{ /* "-le"*/ INTLE , BINOP },
{ /* "-lt"*/ INTLT , BINOP },
{ /* "-nt"*/ FILNT , BINOP },
{ /* "-ot"*/ FILOT , BINOP },
{ /* "-ef"*/ FILEQ , BINOP },
{ /* "!" */ UNOT , BUNOP },
{ /* "-a" */ BAND , BBINOP },
{ /* "-o" */ BOR , BBINOP },
{ /* "(" */ LPAREN , PAREN },
{ /* ")" */ RPAREN , PAREN },
};
/* Please keep these two tables in sync */
static const char ops_texts[] ALIGN1 =
"-r" "\0"
"-w" "\0"
"-x" "\0"
"-e" "\0"
"-f" "\0"
"-d" "\0"
"-c" "\0"
"-b" "\0"
"-p" "\0"
"-u" "\0"
"-g" "\0"
"-k" "\0"
"-s" "\0"
"-t" "\0"
"-z" "\0"
"-n" "\0"
"-h" "\0"
"-O" "\0"
"-G" "\0"
"-L" "\0"
"-S" "\0"
"=" "\0"
/* "==" is bashism */
"==" "\0"
"!=" "\0"
"<" "\0"
">" "\0"
"-eq" "\0"
"-ne" "\0"
"-ge" "\0"
"-gt" "\0"
"-le" "\0"
"-lt" "\0"
"-nt" "\0"
"-ot" "\0"
"-ef" "\0"
"!" "\0"
"-a" "\0"
"-o" "\0"
"(" "\0"
")" "\0"
;
#if ENABLE_FEATURE_TEST_64
typedef int64_t number_t;
#else
typedef int number_t;
#endif
/* We try to minimize both static and stack usage. */
struct test_statics {
char **args;
/* set only by check_operator(), either to bogus struct
* or points to matching operator_t struct. Never NULL. */
const struct operator_t *last_operator;
gid_t *group_array;
int ngroups;
jmp_buf leaving;
};
/* See test_ptr_hack.c */
extern struct test_statics *const test_ptr_to_statics;
#define S (*test_ptr_to_statics)
#define args (S.args )
#define last_operator (S.last_operator)
#define group_array (S.group_array )
#define ngroups (S.ngroups )
#define leaving (S.leaving )
#define INIT_S() do { \
(*(struct test_statics**)&test_ptr_to_statics) = xzalloc(sizeof(S)); \
barrier(); \
} while (0)
#define DEINIT_S() do { \
free(group_array); \
free(test_ptr_to_statics); \
} while (0)
static number_t primary(enum token n);
static void syntax(const char *op, const char *msg) NORETURN;
static void syntax(const char *op, const char *msg)
{
if (op && *op) {
bb_error_msg("%s: %s", op, msg);
} else {
bb_error_msg("%s: %s"+4, msg);
}
longjmp(leaving, 2);
}
/* atoi with error detection */
//XXX: FIXME: duplicate of existing libbb function?
static number_t getn(const char *s)
{
char *p;
#if ENABLE_FEATURE_TEST_64
long long r;
#else
long r;
#endif
errno = 0;
#if ENABLE_FEATURE_TEST_64
r = strtoll(s, &p, 10);
#else
r = strtol(s, &p, 10);
#endif
if (errno != 0)
syntax(s, "out of range");
if (p == s || *(skip_whitespace(p)) != '\0')
syntax(s, "bad number");
return r;
}
/* UNUSED
static int newerf(const char *f1, const char *f2)
{
struct stat b1, b2;
return (stat(f1, &b1) == 0 &&
stat(f2, &b2) == 0 && b1.st_mtime > b2.st_mtime);
}
static int olderf(const char *f1, const char *f2)
{
struct stat b1, b2;
return (stat(f1, &b1) == 0 &&
stat(f2, &b2) == 0 && b1.st_mtime < b2.st_mtime);
}
static int equalf(const char *f1, const char *f2)
{
struct stat b1, b2;
return (stat(f1, &b1) == 0 &&
stat(f2, &b2) == 0 &&
b1.st_dev == b2.st_dev && b1.st_ino == b2.st_ino);
}
*/
static enum token check_operator(const char *s)
{
static const struct operator_t no_op = {
.op_num = -1,
.op_type = -1
};
int n;
last_operator = &no_op;
if (s == NULL)
return EOI;
n = index_in_strings(ops_texts, s);
if (n < 0)
return OPERAND;
last_operator = &ops_table[n];
return ops_table[n].op_num;
}
static int binop(void)
{
const char *opnd1, *opnd2;
const struct operator_t *op;
number_t val1, val2;
opnd1 = *args;
check_operator(*++args);
op = last_operator;
opnd2 = *++args;
if (opnd2 == NULL)
syntax(args[-1], "argument expected");
if (is_int_op(op->op_num)) {
val1 = getn(opnd1);
val2 = getn(opnd2);
if (op->op_num == INTEQ)
return val1 == val2;
if (op->op_num == INTNE)
return val1 != val2;
if (op->op_num == INTGE)
return val1 >= val2;
if (op->op_num == INTGT)
return val1 > val2;
if (op->op_num == INTLE)
return val1 <= val2;
/*if (op->op_num == INTLT)*/
return val1 < val2;
}
if (is_str_op(op->op_num)) {
val1 = strcmp(opnd1, opnd2);
if (op->op_num == STREQ)
return val1 == 0;
if (op->op_num == STRNE)
return val1 != 0;
if (op->op_num == STRLT)
return val1 < 0;
/*if (op->op_num == STRGT)*/
return val1 > 0;
}
/* We are sure that these three are by now the only binops we didn't check
* yet, so we do not check if the class is correct:
*/
/* if (is_file_op(op->op_num)) */
{
struct stat b1, b2;
if (stat(opnd1, &b1) || stat(opnd2, &b2))
return 0; /* false, since at least one stat failed */
if (op->op_num == FILNT)
return b1.st_mtime > b2.st_mtime;
if (op->op_num == FILOT)
return b1.st_mtime < b2.st_mtime;
/*if (op->op_num == FILEQ)*/
return b1.st_dev == b2.st_dev && b1.st_ino == b2.st_ino;
}
/*return 1; - NOTREACHED */
}
static void initialize_group_array(void)
{
group_array = bb_getgroups(&ngroups, NULL);
}
/* Return non-zero if GID is one that we have in our groups list. */
//XXX: FIXME: duplicate of existing libbb function?
// see toplevel TODO file:
// possible code duplication ingroup() and is_a_group_member()
static int is_a_group_member(gid_t gid)
{
int i;
/* Short-circuit if possible, maybe saving a call to getgroups(). */
if (gid == getgid() || gid == getegid())
return 1;
if (ngroups == 0)
initialize_group_array();
/* Search through the list looking for GID. */
for (i = 0; i < ngroups; i++)
if (gid == group_array[i])
return 1;
return 0;
}
/* Do the same thing access(2) does, but use the effective uid and gid,
and don't make the mistake of telling root that any file is
executable. */
static int test_eaccess(struct stat *st, int mode)
{
unsigned int euid = geteuid();
if (euid == 0) {
/* Root can read or write any file. */
if (mode != X_OK)
return 0;
/* Root can execute any file that has any one of the execute
* bits set. */
if (st->st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))
return 0;
}
if (st->st_uid == euid) /* owner */
mode <<= 6;
else if (is_a_group_member(st->st_gid))
mode <<= 3;
if (st->st_mode & mode)
return 0;
return -1;
}
static int filstat(char *nm, enum token mode)
{
struct stat s;
unsigned i = i; /* gcc 3.x thinks it can be used uninitialized */
if (mode == FILSYM) {
#ifdef S_IFLNK
if (lstat(nm, &s) == 0) {
i = S_IFLNK;
goto filetype;
}
#endif
return 0;
}
if (stat(nm, &s) != 0)
return 0;
if (mode == FILEXIST)
return 1;
if (is_file_access(mode)) {
if (mode == FILRD)
i = R_OK;
if (mode == FILWR)
i = W_OK;
if (mode == FILEX)
i = X_OK;
return test_eaccess(&s, i) == 0;
}
if (is_file_type(mode)) {
if (mode == FILREG)
i = S_IFREG;
if (mode == FILDIR)
i = S_IFDIR;
if (mode == FILCDEV)
i = S_IFCHR;
if (mode == FILBDEV)
i = S_IFBLK;
if (mode == FILFIFO) {
#ifdef S_IFIFO
i = S_IFIFO;
#else
return 0;
#endif
}
if (mode == FILSOCK) {
#ifdef S_IFSOCK
i = S_IFSOCK;
#else
return 0;
#endif
}
filetype:
return ((s.st_mode & S_IFMT) == i);
}
if (is_file_bit(mode)) {
if (mode == FILSUID)
i = S_ISUID;
if (mode == FILSGID)
i = S_ISGID;
if (mode == FILSTCK)
i = S_ISVTX;
return ((s.st_mode & i) != 0);
}
if (mode == FILGZ)
return s.st_size > 0L;
if (mode == FILUID)
return s.st_uid == geteuid();
if (mode == FILGID)
return s.st_gid == getegid();
return 1; /* NOTREACHED */
}
static number_t nexpr(enum token n)
{
number_t res;
nest_msg(">nexpr(%s)\n", TOKSTR[n]);
if (n == UNOT) {
n = check_operator(*++args);
if (n == EOI) {
/* special case: [ ! ], [ a -a ! ] are valid */
/* IOW, "! ARG" may miss ARG */
args--;
unnest_msg("<nexpr:1 (!EOI), args:%s(%p)\n", args[0], &args[0]);
return 1;
}
res = !nexpr(n);
unnest_msg("<nexpr:%lld\n", res);
return res;
}
res = primary(n);
unnest_msg("<nexpr:%lld\n", res);
return res;
}
static number_t aexpr(enum token n)
{
number_t res;
nest_msg(">aexpr(%s)\n", TOKSTR[n]);
res = nexpr(n);
dbg_msg("aexpr: nexpr:%lld, next args:%s(%p)\n", res, args[1], &args[1]);
if (check_operator(*++args) == BAND) {
dbg_msg("aexpr: arg is AND, next args:%s(%p)\n", args[1], &args[1]);
res = aexpr(check_operator(*++args)) && res;
unnest_msg("<aexpr:%lld\n", res);
return res;
}
args--;
unnest_msg("<aexpr:%lld, args:%s(%p)\n", res, args[0], &args[0]);
return res;
}
static number_t oexpr(enum token n)
{
number_t res;
nest_msg(">oexpr(%s)\n", TOKSTR[n]);
res = aexpr(n);
dbg_msg("oexpr: aexpr:%lld, next args:%s(%p)\n", res, args[1], &args[1]);
if (check_operator(*++args) == BOR) {
dbg_msg("oexpr: next arg is OR, next args:%s(%p)\n", args[1], &args[1]);
res = oexpr(check_operator(*++args)) || res;
unnest_msg("<oexpr:%lld\n", res);
return res;
}
args--;
unnest_msg("<oexpr:%lld, args:%s(%p)\n", res, args[0], &args[0]);
return res;
}
static number_t primary(enum token n)
{
#if TEST_DEBUG
number_t res = res; /* for compiler */
#else
number_t res;
#endif
const struct operator_t *args0_op;
nest_msg(">primary(%s)\n", TOKSTR[n]);
if (n == EOI) {
syntax(NULL, "argument expected");
}
if (n == LPAREN) {
res = oexpr(check_operator(*++args));
if (check_operator(*++args) != RPAREN)
syntax(NULL, "closing paren expected");
unnest_msg("<primary:%lld\n", res);
return res;
}
/* coreutils 6.9 checks "is args[1] binop and args[2] exist?" first,
* do the same */
args0_op = last_operator;
/* last_operator = operator at args[1] */
if (check_operator(args[1]) != EOI) { /* if args[1] != NULL */
if (args[2]) {
// coreutils also does this:
// if (args[3] && args[0]="-l" && args[2] is BINOP)
// return binop(1 /* prepended by -l */);
if (last_operator->op_type == BINOP)
unnest_msg_and_return(binop(), "<primary: binop:%lld\n");
}
}
/* check "is args[0] unop?" second */
if (args0_op->op_type == UNOP) {
/* unary expression */
if (args[1] == NULL)
// syntax(args0_op->op_text, "argument expected");
goto check_emptiness;
args++;
if (n == STREZ)
unnest_msg_and_return(args[0][0] == '\0', "<primary:%lld\n");
if (n == STRNZ)
unnest_msg_and_return(args[0][0] != '\0', "<primary:%lld\n");
if (n == FILTT)
unnest_msg_and_return(isatty(getn(*args)), "<primary: isatty(%s)%lld\n", *args);
unnest_msg_and_return(filstat(*args, n), "<primary: filstat(%s):%lld\n", *args);
}
/*check_operator(args[1]); - already done */
if (last_operator->op_type == BINOP) {
/* args[2] is known to be NULL, isn't it bound to fail? */
unnest_msg_and_return(binop(), "<primary:%lld\n");
}
check_emptiness:
unnest_msg_and_return(args[0][0] != '\0', "<primary:%lld\n");
}
int test_main(int argc, char **argv)
{
int res;
const char *arg0;
arg0 = bb_basename(argv[0]);
if ((ENABLE_TEST1 || ENABLE_TEST2 || ENABLE_ASH_TEST || ENABLE_HUSH_TEST)
&& (arg0[0] == '[')
) {
--argc;
if (!arg0[1]) { /* "[" ? */
if (NOT_LONE_CHAR(argv[argc], ']')) {
bb_simple_error_msg("missing ]");
return 2;
}
} else { /* assuming "[[" */
if (strcmp(argv[argc], "]]") != 0) {
bb_simple_error_msg("missing ]]");
return 2;
}
}
argv[argc] = NULL;
}
/* argc is unused after this point */
/* We must do DEINIT_S() prior to returning */
INIT_S();
res = setjmp(leaving);
if (res)
goto ret;
/* resetting ngroups is probably unnecessary. it will
* force a new call to getgroups(), which prevents using
* group data fetched during a previous call. but the
* only way the group data could be stale is if there's
* been an intervening call to setgroups(), and this
* isn't likely in the case of a shell. paranoia
* prevails...
*/
/*ngroups = 0; - done by INIT_S() */
argv++;
args = argv;
/* Implement special cases from POSIX.2, section 4.62.4.
* Testcase: "test '(' = '('"
* The general parser would misinterpret '(' as group start.
*/
if (1) {
int negate = 0;
again:
if (!argv[0]) {
/* "test" */
res = 1;
goto ret_special;
}
if (!argv[1]) {
/* "test [!] arg" */
res = (argv[0][0] == '\0');
goto ret_special;
}
if (argv[2]) {
if (!argv[3]) {
/*
* http://pubs.opengroup.org/onlinepubs/009695399/utilities/test.html
* """ 3 arguments:
* If $2 is a binary primary, perform the binary test of $1 and $3.
* """
*/
check_operator(argv[1]);
if (last_operator->op_type == BINOP) {
/* "test [!] arg1 <binary_op> arg2" */
args = argv;
res = (binop() == 0);
ret_special:
/* If there was leading "!" op... */
res ^= negate;
goto ret;
}
/* """If $1 is '(' and $3 is ')', perform the unary test of $2."""
* Looks like this works without additional coding.
*/
goto check_negate;
}
/* argv[3] exists (at least 4 args), is it exactly 4 args? */
if (!argv[4]) {
/*
* """ 4 arguments:
* If $1 is '!', negate the three-argument test of $2, $3, and $4.
* If $1 is '(' and $4 is ')', perform the two-argument test of $2 and $3.
* """
* Example why code below is necessary: test '(' ! -e ')'
*/
if (LONE_CHAR(argv[0], '(')
&& LONE_CHAR(argv[3], ')')
) {
/* "test [!] ( x y )" */
argv[3] = NULL;
argv++;
}
}
}
check_negate:
if (LONE_CHAR(argv[0], '!')) {
argv++;
negate ^= 1;
goto again;
}
}
res = !oexpr(check_operator(*args));
if (*args != NULL && *++args != NULL) {
/* Examples:
* test 3 -lt 5 6
* test -t 1 2
*/
bb_error_msg("%s: unknown operand", *args);
res = 2;
}
ret:
DEINIT_S();
return res;
}