fb79a2e2cf
function old new delta do_iptunnel 203 977 +774 process_dev 5328 5494 +166 ioctl_or_perror - 54 +54 ioctl_or_perror_and_die - 51 +51 ioctl_alt_func - 49 +49 bb_ioctl_or_warn - 47 +47 do_add_ioctl 102 145 +43 bb_xioctl - 39 +39 print_value_on_off - 31 +31 get_lcm 105 123 +18 arp_main 2155 2167 +12 .................. zcip_main 1576 1566 -10 setlogcons_main 92 82 -10 dumpkmap_main 263 253 -10 do_get_ioctl 85 75 -10 setkeycodes_main 165 154 -11 write_table 244 232 -12 vconfig_main 318 306 -12 do_del_ioctl 93 81 -12 set_address 75 62 -13 maybe_set_utc 30 16 -14 loadfont_main 495 479 -16 slattach_main 712 695 -17 do_loadfont 191 174 -17 do_iplink 1155 1136 -19 getty_main 2583 2562 -21 fbset_main 2058 2035 -23 do_time 588 565 -23 xioctl 25 - -25 read_rtc 186 160 -26 parse_conf 1299 1270 -29 udhcp_read_interface 269 239 -30 bb_ioctl 45 - -45 bb_ioctl_alt 70 - -70 bb_ioctl_on_off 78 - -78 .rodata 129370 129018 -352 do_show 799 - -799 ------------------------------------------------------------------------------ (add/remove: 6/5 grow/shrink: 13/49 up/down: 1316/-1864) Total: -548 bytes text data bss dec hex filename 675352 2740 13968 692060 a8f5c busybox_old 674804 2740 13968 691512 a8d38 busybox_unstripped
536 lines
14 KiB
C
536 lines
14 KiB
C
/* vi: set sw=4 ts=4: */
|
|
/*
|
|
* RFC3927 ZeroConf IPv4 Link-Local addressing
|
|
* (see <http://www.zeroconf.org/>)
|
|
*
|
|
* Copyright (C) 2003 by Arthur van Hoff (avh@strangeberry.com)
|
|
* Copyright (C) 2004 by David Brownell
|
|
*
|
|
* Licensed under the GPL v2 or later, see the file LICENSE in this tarball.
|
|
*/
|
|
|
|
/*
|
|
* ZCIP just manages the 169.254.*.* addresses. That network is not
|
|
* routed at the IP level, though various proxies or bridges can
|
|
* certainly be used. Its naming is built over multicast DNS.
|
|
*/
|
|
|
|
//#define DEBUG
|
|
|
|
// TODO:
|
|
// - more real-world usage/testing, especially daemon mode
|
|
// - kernel packet filters to reduce scheduling noise
|
|
// - avoid silent script failures, especially under load...
|
|
// - link status monitoring (restart on link-up; stop on link-down)
|
|
|
|
#include <syslog.h>
|
|
#include <poll.h>
|
|
#include <sys/wait.h>
|
|
#include <netinet/ether.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <linux/if_packet.h>
|
|
#include <linux/sockios.h>
|
|
|
|
#include "libbb.h"
|
|
|
|
/* We don't need more than 32 bits of the counter */
|
|
#define MONOTONIC_US() ((unsigned)monotonic_us())
|
|
|
|
struct arp_packet {
|
|
struct ether_header hdr;
|
|
struct ether_arp arp;
|
|
} ATTRIBUTE_PACKED;
|
|
|
|
enum {
|
|
/* 169.254.0.0 */
|
|
LINKLOCAL_ADDR = 0xa9fe0000,
|
|
|
|
/* protocol timeout parameters, specified in seconds */
|
|
PROBE_WAIT = 1,
|
|
PROBE_MIN = 1,
|
|
PROBE_MAX = 2,
|
|
PROBE_NUM = 3,
|
|
MAX_CONFLICTS = 10,
|
|
RATE_LIMIT_INTERVAL = 60,
|
|
ANNOUNCE_WAIT = 2,
|
|
ANNOUNCE_NUM = 2,
|
|
ANNOUNCE_INTERVAL = 2,
|
|
DEFEND_INTERVAL = 10
|
|
};
|
|
|
|
/* States during the configuration process. */
|
|
enum {
|
|
PROBE = 0,
|
|
RATE_LIMIT_PROBE,
|
|
ANNOUNCE,
|
|
MONITOR,
|
|
DEFEND
|
|
};
|
|
|
|
#define VDBG(fmt,args...) \
|
|
do { } while (0)
|
|
|
|
/**
|
|
* Pick a random link local IP address on 169.254/16, except that
|
|
* the first and last 256 addresses are reserved.
|
|
*/
|
|
static void pick(struct in_addr *ip)
|
|
{
|
|
unsigned tmp;
|
|
|
|
do {
|
|
tmp = rand() & IN_CLASSB_HOST;
|
|
} while (tmp > (IN_CLASSB_HOST - 0x0200));
|
|
ip->s_addr = htonl((LINKLOCAL_ADDR + 0x0100) + tmp);
|
|
}
|
|
|
|
/**
|
|
* Broadcast an ARP packet.
|
|
*/
|
|
static void arp(int fd, struct sockaddr *saddr, int op,
|
|
const struct ether_addr *source_addr, struct in_addr source_ip,
|
|
const struct ether_addr *target_addr, struct in_addr target_ip)
|
|
{
|
|
struct arp_packet p;
|
|
memset(&p, 0, sizeof(p));
|
|
|
|
// ether header
|
|
p.hdr.ether_type = htons(ETHERTYPE_ARP);
|
|
memcpy(p.hdr.ether_shost, source_addr, ETH_ALEN);
|
|
memset(p.hdr.ether_dhost, 0xff, ETH_ALEN);
|
|
|
|
// arp request
|
|
p.arp.arp_hrd = htons(ARPHRD_ETHER);
|
|
p.arp.arp_pro = htons(ETHERTYPE_IP);
|
|
p.arp.arp_hln = ETH_ALEN;
|
|
p.arp.arp_pln = 4;
|
|
p.arp.arp_op = htons(op);
|
|
memcpy(&p.arp.arp_sha, source_addr, ETH_ALEN);
|
|
memcpy(&p.arp.arp_spa, &source_ip, sizeof(p.arp.arp_spa));
|
|
memcpy(&p.arp.arp_tha, target_addr, ETH_ALEN);
|
|
memcpy(&p.arp.arp_tpa, &target_ip, sizeof(p.arp.arp_tpa));
|
|
|
|
// send it
|
|
xsendto(fd, &p, sizeof(p), saddr, sizeof(*saddr));
|
|
|
|
// Currently all callers ignore errors, that's why returns are
|
|
// commented out...
|
|
//return 0;
|
|
}
|
|
|
|
/**
|
|
* Run a script. argv[2] is already NULL.
|
|
*/
|
|
static int run(char *argv[3], const char *intf, struct in_addr *ip)
|
|
{
|
|
int status;
|
|
|
|
VDBG("%s run %s %s\n", intf, argv[0], argv[1]);
|
|
|
|
if (ip) {
|
|
char *addr = inet_ntoa(*ip);
|
|
setenv("ip", addr, 1);
|
|
bb_info_msg("%s %s %s", argv[1], intf, addr);
|
|
}
|
|
|
|
status = wait4pid(spawn(argv));
|
|
if (status < 0) {
|
|
bb_perror_msg("%s %s", argv[1], intf);
|
|
return -errno;
|
|
}
|
|
if (status != 0)
|
|
bb_error_msg("script %s %s failed, exitcode=%d", argv[0], argv[1], status);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* Return milliseconds of random delay, up to "secs" seconds.
|
|
*/
|
|
static unsigned ALWAYS_INLINE ms_rdelay(unsigned secs)
|
|
{
|
|
return rand() % (secs * 1000);
|
|
}
|
|
|
|
/**
|
|
* main program
|
|
*/
|
|
int zcip_main(int argc, char **argv);
|
|
int zcip_main(int argc, char **argv)
|
|
{
|
|
int state = PROBE;
|
|
struct ether_addr eth_addr;
|
|
const char *why;
|
|
int fd;
|
|
char *r_opt;
|
|
unsigned opts;
|
|
|
|
/* Ugly trick, but I want these zeroed in one go */
|
|
struct {
|
|
const struct in_addr null_ip;
|
|
const struct ether_addr null_addr;
|
|
struct sockaddr saddr;
|
|
struct in_addr ip;
|
|
struct ifreq ifr;
|
|
char *intf;
|
|
char *script_av[3];
|
|
int timeout_ms; /* must be signed */
|
|
unsigned conflicts;
|
|
unsigned nprobes;
|
|
unsigned nclaims;
|
|
int ready;
|
|
int verbose;
|
|
} L;
|
|
#define null_ip (L.null_ip )
|
|
#define null_addr (L.null_addr )
|
|
#define saddr (L.saddr )
|
|
#define ip (L.ip )
|
|
#define ifr (L.ifr )
|
|
#define intf (L.intf )
|
|
#define script_av (L.script_av )
|
|
#define timeout_ms (L.timeout_ms)
|
|
#define conflicts (L.conflicts )
|
|
#define nprobes (L.nprobes )
|
|
#define nclaims (L.nclaims )
|
|
#define ready (L.ready )
|
|
#define verbose (L.verbose )
|
|
|
|
memset(&L, 0, sizeof(L));
|
|
|
|
srand(MONOTONIC_US());
|
|
|
|
#define FOREGROUND (opts & 1)
|
|
#define QUIT (opts & 2)
|
|
// parse commandline: prog [options] ifname script
|
|
// exactly 2 args; -v accumulates and implies -f
|
|
opt_complementary = "=2:vv:vf";
|
|
opts = getopt32(argc, argv, "fqr:v", &r_opt, &verbose);
|
|
if (!FOREGROUND) {
|
|
/* Do it early, before all bb_xx_msg calls */
|
|
openlog(applet_name, 0, LOG_DAEMON);
|
|
logmode |= LOGMODE_SYSLOG;
|
|
}
|
|
if (opts & 4) { // -r n.n.n.n
|
|
if (inet_aton(r_opt, &ip) == 0
|
|
|| (ntohl(ip.s_addr) & IN_CLASSB_NET) != LINKLOCAL_ADDR
|
|
) {
|
|
bb_error_msg_and_die("invalid link address");
|
|
}
|
|
}
|
|
// On NOMMU reexec early (or else we will rerun things twice)
|
|
#if !BB_MMU
|
|
if (!FOREGROUND)
|
|
bb_daemonize_or_rexec(DAEMON_CHDIR_ROOT, argv);
|
|
#endif
|
|
argc -= optind;
|
|
argv += optind;
|
|
|
|
intf = argv[0];
|
|
script_av[0] = argv[1];
|
|
setenv("interface", intf, 1);
|
|
|
|
// initialize the interface (modprobe, ifup, etc)
|
|
script_av[1] = (char*)"init";
|
|
if (run(script_av, intf, NULL))
|
|
return EXIT_FAILURE;
|
|
|
|
// initialize saddr
|
|
//memset(&saddr, 0, sizeof(saddr));
|
|
safe_strncpy(saddr.sa_data, intf, sizeof(saddr.sa_data));
|
|
|
|
// open an ARP socket
|
|
fd = xsocket(PF_PACKET, SOCK_PACKET, htons(ETH_P_ARP));
|
|
// bind to the interface's ARP socket
|
|
xbind(fd, &saddr, sizeof(saddr));
|
|
|
|
// get the interface's ethernet address
|
|
//memset(&ifr, 0, sizeof(ifr));
|
|
strncpy(ifr.ifr_name, intf, sizeof(ifr.ifr_name));
|
|
xioctl(fd, SIOCGIFHWADDR, &ifr);
|
|
memcpy(ð_addr, &ifr.ifr_hwaddr.sa_data, ETH_ALEN);
|
|
|
|
// start with some stable ip address, either a function of
|
|
// the hardware address or else the last address we used.
|
|
// NOTE: the sequence of addresses we try changes only
|
|
// depending on when we detect conflicts.
|
|
// (SVID 3 bogon: who says that "short" is always 16 bits?)
|
|
seed48( (unsigned short*)&ifr.ifr_hwaddr.sa_data );
|
|
if (ip.s_addr == 0)
|
|
pick(&ip);
|
|
|
|
// FIXME cases to handle:
|
|
// - zcip already running!
|
|
// - link already has local address... just defend/update
|
|
|
|
// daemonize now; don't delay system startup
|
|
if (!FOREGROUND) {
|
|
#if BB_MMU
|
|
bb_daemonize(DAEMON_CHDIR_ROOT);
|
|
#endif
|
|
bb_info_msg("start, interface %s", intf);
|
|
}
|
|
|
|
// run the dynamic address negotiation protocol,
|
|
// restarting after address conflicts:
|
|
// - start with some address we want to try
|
|
// - short random delay
|
|
// - arp probes to see if another host else uses it
|
|
// - arp announcements that we're claiming it
|
|
// - use it
|
|
// - defend it, within limits
|
|
while (1) {
|
|
struct pollfd fds[1];
|
|
unsigned deadline_us;
|
|
struct arp_packet p;
|
|
|
|
int source_ip_conflict = 0;
|
|
int target_ip_conflict = 0;
|
|
|
|
fds[0].fd = fd;
|
|
fds[0].events = POLLIN;
|
|
fds[0].revents = 0;
|
|
|
|
// poll, being ready to adjust current timeout
|
|
if (!timeout_ms) {
|
|
timeout_ms = ms_rdelay(PROBE_WAIT);
|
|
// FIXME setsockopt(fd, SO_ATTACH_FILTER, ...) to
|
|
// make the kernel filter out all packets except
|
|
// ones we'd care about.
|
|
}
|
|
// set deadline_us to the point in time when we timeout
|
|
deadline_us = MONOTONIC_US() + timeout_ms * 1000;
|
|
|
|
VDBG("...wait %d %s nprobes=%u, nclaims=%u\n",
|
|
timeout_ms, intf, nprobes, nclaims);
|
|
switch (poll(fds, 1, timeout_ms)) {
|
|
|
|
// timeout
|
|
case 0:
|
|
VDBG("state = %d\n", state);
|
|
switch (state) {
|
|
case PROBE:
|
|
// timeouts in the PROBE state mean no conflicting ARP packets
|
|
// have been received, so we can progress through the states
|
|
if (nprobes < PROBE_NUM) {
|
|
nprobes++;
|
|
VDBG("probe/%u %s@%s\n",
|
|
nprobes, intf, inet_ntoa(ip));
|
|
arp(fd, &saddr, ARPOP_REQUEST,
|
|
ð_addr, null_ip,
|
|
&null_addr, ip);
|
|
timeout_ms = PROBE_MIN * 1000;
|
|
timeout_ms += ms_rdelay(PROBE_MAX - PROBE_MIN);
|
|
}
|
|
else {
|
|
// Switch to announce state.
|
|
state = ANNOUNCE;
|
|
nclaims = 0;
|
|
VDBG("announce/%u %s@%s\n",
|
|
nclaims, intf, inet_ntoa(ip));
|
|
arp(fd, &saddr, ARPOP_REQUEST,
|
|
ð_addr, ip,
|
|
ð_addr, ip);
|
|
timeout_ms = ANNOUNCE_INTERVAL * 1000;
|
|
}
|
|
break;
|
|
case RATE_LIMIT_PROBE:
|
|
// timeouts in the RATE_LIMIT_PROBE state mean no conflicting ARP packets
|
|
// have been received, so we can move immediately to the announce state
|
|
state = ANNOUNCE;
|
|
nclaims = 0;
|
|
VDBG("announce/%u %s@%s\n",
|
|
nclaims, intf, inet_ntoa(ip));
|
|
arp(fd, &saddr, ARPOP_REQUEST,
|
|
ð_addr, ip,
|
|
ð_addr, ip);
|
|
timeout_ms = ANNOUNCE_INTERVAL * 1000;
|
|
break;
|
|
case ANNOUNCE:
|
|
// timeouts in the ANNOUNCE state mean no conflicting ARP packets
|
|
// have been received, so we can progress through the states
|
|
if (nclaims < ANNOUNCE_NUM) {
|
|
nclaims++;
|
|
VDBG("announce/%u %s@%s\n",
|
|
nclaims, intf, inet_ntoa(ip));
|
|
arp(fd, &saddr, ARPOP_REQUEST,
|
|
ð_addr, ip,
|
|
ð_addr, ip);
|
|
timeout_ms = ANNOUNCE_INTERVAL * 1000;
|
|
}
|
|
else {
|
|
// Switch to monitor state.
|
|
state = MONITOR;
|
|
// link is ok to use earlier
|
|
// FIXME update filters
|
|
script_av[1] = (char*)"config";
|
|
run(script_av, intf, &ip);
|
|
ready = 1;
|
|
conflicts = 0;
|
|
timeout_ms = -1; // Never timeout in the monitor state.
|
|
|
|
// NOTE: all other exit paths
|
|
// should deconfig ...
|
|
if (QUIT)
|
|
return EXIT_SUCCESS;
|
|
}
|
|
break;
|
|
case DEFEND:
|
|
// We won! No ARP replies, so just go back to monitor.
|
|
state = MONITOR;
|
|
timeout_ms = -1;
|
|
conflicts = 0;
|
|
break;
|
|
default:
|
|
// Invalid, should never happen. Restart the whole protocol.
|
|
state = PROBE;
|
|
pick(&ip);
|
|
timeout_ms = 0;
|
|
nprobes = 0;
|
|
nclaims = 0;
|
|
break;
|
|
} // switch (state)
|
|
break; // case 0 (timeout)
|
|
// packets arriving
|
|
case 1:
|
|
// We need to adjust the timeout in case we didn't receive
|
|
// a conflicting packet.
|
|
if (timeout_ms > 0) {
|
|
unsigned diff = deadline_us - MONOTONIC_US();
|
|
if ((int)(diff) < 0) {
|
|
// Current time is greater than the expected timeout time.
|
|
// Should never happen.
|
|
VDBG("missed an expected timeout\n");
|
|
timeout_ms = 0;
|
|
} else {
|
|
VDBG("adjusting timeout\n");
|
|
timeout_ms = diff / 1000;
|
|
if (!timeout_ms) timeout_ms = 1;
|
|
}
|
|
}
|
|
|
|
if ((fds[0].revents & POLLIN) == 0) {
|
|
if (fds[0].revents & POLLERR) {
|
|
// FIXME: links routinely go down;
|
|
// this shouldn't necessarily exit.
|
|
bb_error_msg("%s: poll error", intf);
|
|
if (ready) {
|
|
script_av[1] = (char*)"deconfig";
|
|
run(script_av, intf, &ip);
|
|
}
|
|
return EXIT_FAILURE;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
// read ARP packet
|
|
if (recv(fd, &p, sizeof(p), 0) < 0) {
|
|
why = "recv";
|
|
goto bad;
|
|
}
|
|
if (p.hdr.ether_type != htons(ETHERTYPE_ARP))
|
|
continue;
|
|
|
|
#ifdef DEBUG
|
|
{
|
|
struct ether_addr * sha = (struct ether_addr *) p.arp.arp_sha;
|
|
struct ether_addr * tha = (struct ether_addr *) p.arp.arp_tha;
|
|
struct in_addr * spa = (struct in_addr *) p.arp.arp_spa;
|
|
struct in_addr * tpa = (struct in_addr *) p.arp.arp_tpa;
|
|
VDBG("%s recv arp type=%d, op=%d,\n",
|
|
intf, ntohs(p.hdr.ether_type),
|
|
ntohs(p.arp.arp_op));
|
|
VDBG("\tsource=%s %s\n",
|
|
ether_ntoa(sha),
|
|
inet_ntoa(*spa));
|
|
VDBG("\ttarget=%s %s\n",
|
|
ether_ntoa(tha),
|
|
inet_ntoa(*tpa));
|
|
}
|
|
#endif
|
|
if (p.arp.arp_op != htons(ARPOP_REQUEST)
|
|
&& p.arp.arp_op != htons(ARPOP_REPLY))
|
|
continue;
|
|
|
|
if (memcmp(p.arp.arp_spa, &ip.s_addr, sizeof(struct in_addr)) == 0 &&
|
|
memcmp(ð_addr, &p.arp.arp_sha, ETH_ALEN) != 0) {
|
|
source_ip_conflict = 1;
|
|
}
|
|
if (memcmp(p.arp.arp_tpa, &ip.s_addr, sizeof(struct in_addr)) == 0 &&
|
|
p.arp.arp_op == htons(ARPOP_REQUEST) &&
|
|
memcmp(ð_addr, &p.arp.arp_tha, ETH_ALEN) != 0) {
|
|
target_ip_conflict = 1;
|
|
}
|
|
|
|
VDBG("state = %d, source ip conflict = %d, target ip conflict = %d\n",
|
|
state, source_ip_conflict, target_ip_conflict);
|
|
switch (state) {
|
|
case PROBE:
|
|
case ANNOUNCE:
|
|
// When probing or announcing, check for source IP conflicts
|
|
// and other hosts doing ARP probes (target IP conflicts).
|
|
if (source_ip_conflict || target_ip_conflict) {
|
|
conflicts++;
|
|
if (conflicts >= MAX_CONFLICTS) {
|
|
VDBG("%s ratelimit\n", intf);
|
|
timeout_ms = RATE_LIMIT_INTERVAL * 1000;
|
|
state = RATE_LIMIT_PROBE;
|
|
}
|
|
|
|
// restart the whole protocol
|
|
pick(&ip);
|
|
timeout_ms = 0;
|
|
nprobes = 0;
|
|
nclaims = 0;
|
|
}
|
|
break;
|
|
case MONITOR:
|
|
// If a conflict, we try to defend with a single ARP probe.
|
|
if (source_ip_conflict) {
|
|
VDBG("monitor conflict -- defending\n");
|
|
state = DEFEND;
|
|
timeout_ms = DEFEND_INTERVAL * 1000;
|
|
arp(fd, &saddr,
|
|
ARPOP_REQUEST,
|
|
ð_addr, ip,
|
|
ð_addr, ip);
|
|
}
|
|
break;
|
|
case DEFEND:
|
|
// Well, we tried. Start over (on conflict).
|
|
if (source_ip_conflict) {
|
|
state = PROBE;
|
|
VDBG("defend conflict -- starting over\n");
|
|
ready = 0;
|
|
script_av[1] = (char*)"deconfig";
|
|
run(script_av, intf, &ip);
|
|
|
|
// restart the whole protocol
|
|
pick(&ip);
|
|
timeout_ms = 0;
|
|
nprobes = 0;
|
|
nclaims = 0;
|
|
}
|
|
break;
|
|
default:
|
|
// Invalid, should never happen. Restart the whole protocol.
|
|
VDBG("invalid state -- starting over\n");
|
|
state = PROBE;
|
|
pick(&ip);
|
|
timeout_ms = 0;
|
|
nprobes = 0;
|
|
nclaims = 0;
|
|
break;
|
|
} // switch state
|
|
|
|
break; // case 1 (packets arriving)
|
|
default:
|
|
why = "poll";
|
|
goto bad;
|
|
} // switch poll
|
|
}
|
|
bad:
|
|
bb_perror_msg("%s, %s", intf, why);
|
|
return EXIT_FAILURE;
|
|
}
|